Question on Line
I do alot of recording with external sources such as records and tapes. I noticed that when I record with the line input, it records at a low level. I have to go into my music program and up the volume all the time. I have the input level all the way to the max but yet it isn't very loud when it records. I was wondering if there was some other type of setting? I've tried using the mic unforutnately it gives me hums and crackles when I record.
Any suggestions?
Thanks
Mel
Some sources for line-in recording can at quite a low level. The solution is to use a wave editor program to "normalize" the volume of the audio file that you have recorded.
Similar Messages
-
Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail the answers or did not make opportunity to have as an option to reset my security questions on line.
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97776) -
Questions - Drop Lines & Responsibility, Noise, En...
Hi,
I wonder if you could answer a few questions:
#1 Are BT/OpenReach responsible for the wire from the back of the NTE5 master socket and beyond?
I believe I am only responsible for anything from the master socket "inwards" inside my home. #151 faults have told me I am responsible for everything within the boundary of my property.
#2 Our local area is all underground cabling. The phoneline comes under the front gardens (semi-detached), and appears at the wall, middle of both houses. Small circular junction box, line off to each house. The cable from the junction to our house is 6-core white cable, looks suspiciously the same as the internal extension wiring you can buy yourself. Should this quality of cable be used externally?
#3 There is a second phone line to our home from the junction box, we have never had a second line so presume the previous owners asked for this. The line is not connected, I have removed the wall socket it went to and clipped the cable back. This 2nd line cable is a simple grey 2-core, and I have noticed that it has a break in the outer sleeve, and can see the bare metal of the enclosed cable. Would this be a free of charge visit by an Engineer to remove?
Background:
Two weeks ago, I was prompted by failing internet connection to do the quiet line test using a corded phone in the master socket. To say there was noise on the line was an understatement! Unfortunately #151 fault did a line test and reported no problems. Then warned of £130 call out charge, and asked if I wanted an Engineer out. Of course I didn't want to risk it, replacement router seemed to coincidentally arrive when the line noise had subsided.
Back to testing today, same quiet line test, still have feint noise on line. Nothing spectacular but all the same, I'd rather it resolved.
#151, same routine. Do a line test, no fault, warn of £130 charge and ask if I want an Engineer out.
Here lies the rub, I am wondering if the broken second line cable and/or the internal quality cable on their own would be sufficient for an Engineer to visit anyway, ie FREE. Can I get an answer out of #151, no I can't. The ropey answer to question #1 above from #151 leads me to believe I can't get off the call centre script of "do line test, book engineer."
I wish I was responsible for the line within my property, I could happily remove and replace the cables!
edit: coincidentally two weeks the weather was very bad, torrential rain and wind. Now it's sunny, calm but **bleep** cold. This "noise" has been on and off over the years, but hasn't caused internet issues until now.
Solved!
Go to Solution.chadders74 wrote:
Apologies, please subsitute "Test Socket" for "Master Socket" in my original post!
After reading other posts, I am just worried about an Engineer turning up for "line noise" and there being none on the day in question, and thus being on the receiving end of a £130 bill.
edit: I am trying to ascertain if the outside cables are in fact "an issue", and will lead to a guaranteed free Engineer visit regardless of line noise.
Well if the noise is still there at the test socket, then there is an external issue somewhere. The "internal" cable used outside does not sound right. It could have water ingress causing all manner of problems.
In theory, Openreach should do what they call a "Quality Check", at the cabinet and distribution point, especially if its a repeat fault.
It could be a high resistance connection or corrosion.
Charging is a difficult issue. It all depends on how the Openreach technician closes their job. Sometime charges can be raised by mistake.
I would report it as an intermittent noisy phone problem which happens when it rains, and mention the poor state of the external DP (Distribution Point). Do not report it as broadband fault
With luck they should repace the wiring, and remove any unwanted terminations, which could be introducing noise into the line.
If the Openreach technician does do work outside, then he should make sure that this is recorded as the possible fault, and not "fault not found (FNF)" or "right when tested (RWT)".
If that is done correctly, then you should not be charged. You may like to mention it to them
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Open question on lines TOUCHing or CONNECTing
posted as an open question/discussion:
the TOUCH mask for spatial operators between lines is both valid (among others) for
|
|
|--------------
|
Horizontal Line boundary intersecting with Vertical line interior
as
|
|
|__________
Horizontal Line boundary intersecting at Vertical line boundary
The question is:
could it be useful to have a specific operator distinction between the first and second situation, to distinguish those situation?
this could allow for quickly query/analyse lines that are CONNECTing excluding the first situation, using only sdo_relate with a CONNECT mask?
this means the following 9i element matrix cases (now all TOUCH) could be CONNECT:
10*0*1*11, allowing only 1 or both line boundaries intersecting at another line boundary(ies).
(I know an alternative is using sdo_relate with one of the spatial functions in the select clause.)Luc,
Thanks.
I think that it would be a good idea. I am sure if I sat down and thought for a moment I would come up with a good business situation that it would help with.
My current client is a UK environment organisation and they capture certain environmental features as invidual lines which join together to make a feature. Within the Oracle table the component parts are stored in separate rows with attributes to piece them together. I am sure your proposal would help to provide another easy solution.
Ivan -
Design Question - Command Line Argument Processor
Folks,
I'm a java and OO newbie... I've been going through Sun's java tutorials
I've "enhanced" Sun's RegexTestHarness.java (using Aaron Renn's gnu.getopt package) to expose the various Pattern.FLAGS on the command line.
Whilst it does work the arguement processing code is awkward so I want to rewrite it... but I'm pretty new to OO, so before I spend days hacking away at a badly designed ArgsProcessor package I thought I'd run my deign ideas past the guru's... and atleast see if my ideas are impossible, or just plain bad.
Any comments would be greatly appreciated.
The starting point is RegexTestHarness.java/**
*@source : C:\Java\src\Tutorials\Sun\RegexTestHarness.java
*@compile : C:\Java\src\Tutorials\Sun>javac -classpath ".;C:\Java\lib\java-getopt-1.0.13.jar" RegexTestHarness.java
*@run : C:\Java\src\Tutorials\Sun>java -classpath ".;C:\Java\lib\java-getopt-1.0.13.jar" RegexTestHarness -i
*@usage : RegexTestHarness [-vcixmslud]
//http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.BufferedReader;
//http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/package-summary.html
import java.util.regex.Pattern;
import java.util.regex.Matcher;
import java.util.regex.PatternSyntaxException;
//http://www.urbanophile.com/arenn/hacking/getopt/gnu.getopt.Getopt.html
import gnu.getopt.Getopt;
import gnu.getopt.LongOpt;
* private command line options interpreter class
class Options {
public boolean verbose = false;
public int flags = 0;
public Options(String progname, String[] argv) throws IllegalArgumentException {
LongOpt[] longopts = new LongOpt[9];
longopts[0] = new LongOpt("verbose", LongOpt.NO_ARGUMENT, null, 'v');
longopts[1] = new LongOpt("CANON_EQ", LongOpt.NO_ARGUMENT, null, 'c');
longopts[2] = new LongOpt("CASE_INSENSITIVE", LongOpt.NO_ARGUMENT, null, 'i');
longopts[3] = new LongOpt("COMMENTS", LongOpt.NO_ARGUMENT, null, 'x');
longopts[4] = new LongOpt("MULTILINE", LongOpt.NO_ARGUMENT, null, 'm');
longopts[5] = new LongOpt("DOTALL", LongOpt.NO_ARGUMENT, null, 's');
longopts[6] = new LongOpt("LITERAL", LongOpt.NO_ARGUMENT, null, 'l');
longopts[7] = new LongOpt("UNICODE_CASE", LongOpt.NO_ARGUMENT, null, 'u');
longopts[8] = new LongOpt("UNIX_LINES", LongOpt.NO_ARGUMENT, null, 'd');
Getopt opts = new Getopt(progname, argv, "vcixmslud", longopts);
opts.setOpterr(false);
int c;
//String arg;
while ( (c=opts.getopt()) != -1 ) {
//arg = opts.getOptarg();
//(char)(new Integer(sb.toString())).intValue()
switch(c) {
case 'v': verbose = true; break;
//http://java.sun.com/docs/books/tutorial/essential/regex/pattern.html
case 'c': this.flags |= Pattern.CANON_EQ; break;
case 'i': this.flags |= Pattern.CASE_INSENSITIVE; break;
case 'x': this.flags |= Pattern.COMMENTS; break;
case 'm': this.flags |= Pattern.MULTILINE; break;
case 's': this.flags |= Pattern.DOTALL; break;
case 'l': this.flags |= Pattern.LITERAL; break;
case 'u': this.flags |= Pattern.UNICODE_CASE; break;
case 'd': this.flags |= Pattern.UNIX_LINES; break;
case '?': throw new IllegalArgumentException("bad switch '"+(char)opts.getOptopt()+"'"); //nb: getopt() spits
public String toString() {
StringBuffer s = new StringBuffer(128);
if (verbose) s.append("verbose, ");
if ((this.flags & Pattern.CANON_EQ) != 0) s.append("CANON_EQ, ");
if ((this.flags & Pattern.CASE_INSENSITIVE) != 0) s.append("CASE_INSENSITIVE, ");
if ((this.flags & Pattern.COMMENTS) != 0) s.append("COMMENTS, ");
if ((this.flags & Pattern.MULTILINE) != 0) s.append("MULTILINE, ");
if ((this.flags & Pattern.DOTALL) != 0) s.append("DOTALL, ");
if ((this.flags & Pattern.LITERAL) != 0) s.append("LITERAL, ");
if ((this.flags & Pattern.UNICODE_CASE) != 0) s.append("UNICODE_CASE, ");
if ((this.flags & Pattern.UNIX_LINES) != 0) s.append("UNIX_LINES, ");
if (!s.equals("")) {
s.insert(0,"{");
s.replace(s.length()-2,s.length(),"");
s.append("}");
return(s.toString());
* public regular expression test harness
public class RegexTestHarness {
public static void main(String[] argv){
BufferedReader in = null;
try {
Options options = new Options("RegexTestHarness", argv);
//System.out.println(options);
in = new BufferedReader(new InputStreamReader(System.in));
System.out.println("RegexTestHarness");
System.out.println("----------------");
System.out.println();
System.out.println("usage: Enter your regex (none to exit), then the string to search.");
System.out.println("from: http://java.sun.com/docs/books/tutorial/essential/regex/index.html");
String regex = null;
while(true) {
try {
System.out.println();
System.out.print("regex: ");
regex = in.readLine();
if (regex.equals("")) break;
Pattern pattern = Pattern.compile(regex, options.flags);
System.out.print("string: ");
Matcher matcher = pattern.matcher(in.readLine());
if (options.verbose) System.out.printf("groupCount=%d%n", matcher.groupCount());
while (matcher.find()) {
System.out.printf("%d-%d:'%s'%n", matcher.start()+1, matcher.end(), matcher.group());
//start is a zero based offset, but one based is more meaningful to the user, Me.
} catch (PatternSyntaxException e) {
System.out.println("Pattern.compile("+regex+") " + e);
} catch (IllegalStateException e) {
System.out.println("matcher.group() " + e);
} //wend
} catch (IllegalArgumentException e) {
System.out.println(e);
} catch (Exception e) {
e.printStackTrace();
} finally {
try {in.close();} catch(Exception e){}
}... I haven't got a clue if it's possible, but I want my ArgProcessor.getArgs method to return a hash (keyed on name) of Objects of the requested "mixed" types... for example a boolean, a String, and a String[].
I want the client code of my new fangled ArgProcessor to look something like this:class testArgProcessor {
public static void main(String[] args) {
//usage testArgProcessor [-v] [-o outfile] file ...
try {
HashMap<Arguement> args = ArgProcessor.getArgs( args,
{ //hasArg value, letter, name, type, value, default
{hasArg.NONE, 'v', 'verbose', 'boolean', true, false}
, {hasArg.REQUIRED, 'o', 'outfile', 'String', null, null}
, {hasArg.ARRAY, '', 'filelist', 'String[]', null, null}
if (args.outfile != null) {
out = new BufferedWriter(......);
} else {
out = System.out;
for (String file : filelist) {
if (args.verbose) System.out.println("processingFile: " + file)
... process the file ...
} catch (IllegalArgumentException e) { //from ArgProcessor.getArgs()
System.out.println(e);
}Paul,
What are you trying to do, and why?Sorry I should have made myself a lot clearer...
What I'm really trying to do is learn Java, and good OO design... so I'm going through the Sun tutorials, and I see that the standard Pattern class has a few handy switches, so I wanted to expose them to the command line... which I did using the handy gnu.getopts library...
Are you trying to write a general purpose
command-line processing library?Yes, I'm trying to write a general purpose command-line processing library? one that's "cleaner" to use than the gnu.getopts.
I've been hacking away for a few hours and haven't gotten very far... what I have discovered is that gnu.getopts class is in fact very clever (surprise surprise)... and my idea to "simplify" it's usage leads to loss of flexibility. So, I'm starting to think I'm completely barking up the wrong tree... and that I was somewhat vanglorious thinking that I (a newbie) could improve upon it.
Are you trying to write a command-line app to do
pattern matching?Yep, That too... That's where I started... with an example from Sun's tutorials... where it's used to parse a long series of patterns and strings, exploring java's regex capabilities.
I think I'll just give up on "improving" on gnu.getopts... my options processing code is ugly, and so be it.
Thanx for your interest anyway.
Keith. -
Question regarding line in on Macbook air, early 2014
Excuse my english, I'm from Sweden.
My computer is running OS X 10.9.5
I'm trying to figure out exactly what apple mean by saying:
If the computer only has one port for sound then it will be marked with a headphone sign and can be used as both in- and output for sound.
This text is found in "helpcenter" and futher down, apple also suggests that the user could change the function from output to input by choosing in the "use for" meny. On my computer this meny does not exist at all and there seem to be no possibility to configure the 3,5mm port.
I honestly don't get it... Is there some additional setup that has to be done? Do I have to download some drivers for the soundcard? DOES the Macbook air even have the hardware possibility to record via line in..?Hi Lanny - thanks but I can't make this link work! It comes up with a blank page. Having said that, I already searched on google and amazon but I don't understand which/what I need - so I really wanted a definitive answer!
-
Question on line selection in table control in dialog programming....
Hello,
I have a internal table displayed on a screen using Table control wizard. Now, when user selects a particular line and double clicks it, I want to write a query based on the line user selected. How can this be achieved ?
Regards,
Rajesh.Assign a function code to F2 in your status and do the coding:
PROCESS PAI.
LOOP AT ITAB.
MODULE GET_CURSOR.
ENDLOOP.
MODULE USER_COMMAND.
MODULE GET_CURSOR.
GET CURSOR FIELD ws_field LINE ws_line.
ENDMODULE.
MODULE USER_COMMAND.
CASE OK_CODE.
WHEN 'PICK'.
WS_LINE = <TABLE CONTROL>-TOP_LINE + WS_LINE - 1.
READ TABLE ITAB INDEX WS_LINE.
---> Show details
ENDMODULE. -
SD Question: Product Line in Invoice?
Anybody know where the Product Line field is on an invoice (VF03) and its field name?
Thank-You.You want to get the line item details of the invoice ?? Then check table VBRP for line itemd details and VBRK for the header information.
-
Question ( command line related )
How do you execute a .jar file on Windows without having the command line opening along with your program ? For Instance I am using a bat file that executes this command 'java -jar wahiki.jar' but when I click on it the program opens normally but the dos window remains. How can I avoid that ? Thanks a lot
Are you doing this from a batch file? If so, then you're going to see the command prompt window, regardless of the fact that you use javaw instead of java. (Oh, yes you are, I see now that I read your original post again).
By the way, you can also start your program by double-clicking on the executable JAR file in Windows, which is equivalent to running the command: javaw -jar myprogram.jar
Message was edited by:
jesperdj -
Hi.
My recent (and previous bills) shows the rental charge for my "Unlimited Evening and Weekend Plan" to be £15.78. But when I look at another BT webpage it says this plan costs £2.99 plus £11.54 line rental, which comes to £14.53.
How come the difference? (which appears to be 8.6%) Is this something to do with Vat?
Thanks.
Solved!
Go to Solution.Pure Guess but the £1.25 difference could be due to you not opting for paperless billing.
-
Hello,
I have several 4510E+R switches with the following modules:
Mod Ports Card Type Model
---+-----+-------------------------------------- +------------------
1 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
2 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
3 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E
4 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E
5 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E
7 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E
8 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
10 48 10/100BaseTX (RJ45) WS-X4148-RJ
As you can see, the WS-X4148-RJ is an older line card. Our other 4510s have 2 of these same older line cards installed and are used for the wired side of our Guest network. Are there any potential negative results of using these older line cards in these chassis? The reason we do this is so that we have less switches to manage on our network and don't have to worry about purchasing additional equipment to accommodate our wired guests.
Thanks!Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I'm not aware of any major adverse impact.
The "original" 4500 cards were limited to 6 Gbps per slot, but that's fine for a 48 FE port card. -
Swing worker question -- two lines performing a similar task concurrently
Hi,
I've been playing around with swingworker.
The code below has a window with two buttons and two text areas.
When you click a button, the text area will count out 10000 random numbers, and print "done." when it's finished.
Each of the buttons works when pressed separately (one is running while the other is idle) But I can't push one, then the other and have the tasks run independantly.
One stops and abruptly finishes while the other pauses.
Sorry to post a lot of code, I'm going through the tutorials, I've looked at the example from the tutorial pretty extensivley, but that is only running one task.
thanks.
bp
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import javax.swing.border.Border;
import javax.swing.BorderFactory;
import java.awt.Insets;
import javax.swing.*;
import javax.swing.SwingWorker;
public class TestGui2 extends JFrame{
JButton button1;
JButton button2;
JTextArea tArea1;
JTextArea tArea2;
Border border;
public void buildGui(){
JPanel mainPanel = new JPanel();
mainPanel.setLayout(new GridBagLayout());
GridBagConstraints mpc = new GridBagConstraints();
mpc.insets = new Insets(3, 10, 3, 10);
border = BorderFactory.createLoweredBevelBorder();
JLabel titleLabel = new JLabel("<html><h1><font face=\"Courier\">GridBagLayout Test Gui</font></h1></html>");
mpc.weightx=0.5;
mpc.fill = GridBagConstraints.CENTER;
mpc.gridx=1;
mpc.gridy=0;
mainPanel.add(titleLabel, mpc);
button1 = new JButton("run job1");
button1.addActionListener(new Button1Listener());
mpc.weightx=0.5;
mpc.fill = GridBagConstraints.EAST;
mpc.gridx=0;
mpc.gridy=1;
mainPanel.add(button1, mpc);
tArea1 = new JTextArea("sample text");
tArea1.setBorder(border);
mpc.weightx=0.5;
mpc.fill = GridBagConstraints.HORIZONTAL;
mpc.gridx=1;
mpc.gridy=1;
mainPanel.add(tArea1, mpc);
button2 = new JButton("run job2");
button2.addActionListener(new Button2Listener());
mpc.weightx=0.5;
mpc.fill = GridBagConstraints.EAST;
mpc.gridx=0;
mpc.gridy=2;
mainPanel.add(button2, mpc);
tArea2 = new JTextArea("sample text");
tArea2.setBorder(border);
mpc.weightx=0.5;
mpc.fill = GridBagConstraints.HORIZONTAL;
mpc.gridx=1;
mpc.gridy=2;
mainPanel.add(tArea2, mpc);
// frame settings
add(mainPanel);
setSize(700,450);
setTitle("TestGui2");
setDefaultCloseOperation(EXIT_ON_CLOSE);
setVisible(true);
// inner classes
class Button1Listener implements ActionListener{
public void actionPerformed(ActionEvent e) {
BigJobWorker worker = new BigJobWorker();
worker.execute();
class Button2Listener implements ActionListener{
public void actionPerformed(ActionEvent e) {
BigJobWorker2 worker2 = new BigJobWorker2();
worker2.execute();
//SwingWorker class
class BigJobWorker2 extends SwingWorker<Void, Void>{
protected Void doInBackground(){
try{
for(int i=0; i<10000;i++){
int num2 = (int)(Math.random() * 100);
Integer integerNum2 = num2;
tArea2.setText("iteration: " + i + " " + integerNum2.toString());
//ReallyBigJob rbj = new ReallyBigJob();
//tArea1.setText(rbj.doBigJob().toString());
tArea2.setText("done.");
} catch (Exception e3){
e3.printStackTrace();
return null;
private class BigJobWorker extends SwingWorker<Void, Void>{
protected Void doInBackground(){
try{
for(int i=0; i<10000;i++){
int num = (int)(Math.random() * 100);
Integer integerNum = num;
tArea1.setText("iteration: " + i + " " + integerNum.toString());
//ReallyBigJob rbj = new ReallyBigJob();
//tArea1.setText(rbj.doBigJob().toString());
tArea1.setText("done.");
} catch (Exception e2){
e2.printStackTrace();
return null;
public static void main(String[] args) {
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
TestGui2 test = new TestGui2();
test.buildGui();
BTW, I realize this code isn't as OOO as it could be (2 SwingWorker classes that do the same thing, 2 listeners that do the same thing) But I wanted to isoloate the problem first.
thanks.
Also, it's not impossible the program is working properly, it just finishes before the textArea can be updated.
Edited by: badperson on Feb 28, 2008 8:24 AM
Edited by: badperson on Feb 28, 2008 8:57 AMHi,
I reworked the code, and it now sort of works What I had wanted was to watch each window increment at the same rate, independant of each other. This will show a number in the window intemittenly, but not in a smooth continuous flow.
class BigJobWorker2 extends SwingWorker<Void, String>{
@Override
protected Void doInBackground(){
try{
for(int i=0; i<100000;i++){
int num2 = (int)(Math.random() * 100);
Integer integerNum2 = num2;
//tArea2.setText("iteration: " + i + " " + integerNum2.toString());
publish("iteration: " + i + " " + integerNum2.toString());
//ReallyBigJob rbj = new ReallyBigJob();
//tArea1.setText(rbj.doBigJob().toString());
publish("done.");
} catch (Exception e3){
e3.printStackTrace();
tArea2.setText("EXCEPTION:");
return null;
// override process method
@Override
protected void process(List<String> messages) {
Iterator i = messages.iterator();
while (i.hasNext()){
String message = (String)i.next();
tArea2.setText(message);
} // end BigJobWorker2thanks,
badperson -
An old question re: "file not compatible with this version of Photoshop"
Hi All. I'm a new member of forum with an old question.
Running:
MAC OSX 10.3.9
G5
Dual 1.8 Ghz
1.5 GB DDR SDRAM
Norton Autoprotect
Nortons Firewall
Antivrus 9.0.4
Liveupdate 3.0.3
CS2
MAC is kept clear of clutter and has plenty of space in all areas. Everything is stored on Xternal HD.
In recent weeks I have been receiving the above error message when trying to open existing CS2 layered files.
I have searched forums including these and tried everything which has been suggested: Shut down Nortons. Worked only from HD. No networks. Tried opening with PS 7 in Classic. IR. Illustrator. Graphic Convertor. Changed to .tif, .tiff.
Opening files with CS is one thing I have not tried, I have not been able to find a version of 8 anywhere to buy or download.
I have not had any success recovering layered files, it seems that once a file has corrupted in this way there is little or no chance of recovery.
Having rebuilt many complex files from scratch I am naturally concerned I will have the same trouble with those. To try and avoid problems my latest files are made up of simple CMYK photographic images in multiple layers - no text, no smart layers, no groups.
But a simple file made yesterday gave me same error message today.
So today I have started saving many versions of the same file, an RGB version (so I can possible open in IR), a different name, a version as a tif, a psd, I'm keeping a version on HD which i am working on, and numerous other versions on a LACIE Xternal HD.
Does anyone have any idea at which point in the process the file actually corrupts? Is it during saving or when sitting on HD, or is it during the opening process? Or is while working on the file?
Some discussions suggest that if you are able to actually open a file, a corrupt layer is found and deleted and this resolves the problem.
If there are a number of saved versions of same file, is it likely that they will all be corrupt or might some be ok?
I am considering upgrading to a new, more powerful MAC and a later version of PS. Does the same error crop up on these later versions? Most of the forum discussions go back a couple of years so does that mean some of these issues have been resolved in recent months?
I imagine that it may be the opposite, ie, the more complex the programme becomes and the more virus protection etc we put on our MACS the more likely there will be problems.
A lot of questions (and line spacing!), for which I apologise, but any thoughts or up to date comments would be very welcome.
Thanks
Pauli havent had nortons running for sometime to try and avoid this ps
problem and although i cant really be sure there dont appear to be have
been any virus problems.
except of course the ps error. which is occurring with or without
nortons turned on. i may uninstall it and see if that helps.
bearing in mind that i am not working over networks do you think this
issue is a ps bug pure and simple or as a result of some combo of other
programme such as nortons affecting ps. in other words would a mac only
running ps still encounter the same errors? -
Displaying line items, although not activated in FS00
Hi everyone!
I've got a question about line items.
I had created a GL account, and in it's master record I didn't activated Display line item. But, when I call transaction for displaying GL account's line items (FAGLL03), I can see line items?
How is that possible?
I know that there are some special cases, for example expense accounts: for every expense account there is a cost element in CO, and no matter settings in FS00, for expense account there is always line item display. Similary, reconciliation accounts always have open items management, irrespective of settings in FS00.
But this is just regular account, with very few settings in master record: its balance sheet account, the account currency is local currency, sort key 001 and field status group G001. And that's all.
Can somebody explaine this?Guys. In addition to above my problem. I was facing this problem due to some graphics issue on my laptop. I was not able to see most of the fields because of Graphics Driver installed on my laptop. ( Later on I got this solution. ).
This seems very unrealistic to hear but my experience is true.
I hope in future if some one will have this issue please check out driver compatibility specially Graphics. This problem may suppose to encounter with Dell.
Anyways Z layout also worked fine as suggested by Guest FICO.
Thank you all.
Regards,
Sharvari Joshi. -
When I export my Pages document as a PDF, it ends up with a gray outline of the rectangles I used to mask the images in the document. Is there any way to stop this from happening?
It seems to be similar but s far as I know, it's different.
In the OP's question, the lines was appearing on screen, not on printing.
I responded:
+It seems that it's a Preview artefact.+
+When I uses Adobe Reader to display the PDF, there is no white rectangle.+
+I was able to reproduce the described behavior creating a document from scratch, but only when the original PDF was made from a solid color (in fact a shape of Pages).+
+When the original PDF is a picture, I am unable to reproduce the behavior.+
I have no such Photoshop file available but my memory rings.
May you check how it behaves if you remove the transparent background?
As old users like me perfectly know, when a user guide states: the program may open Photoshop files we must understand: "it may open them but maybe with some drawbacks" or "it may open some of them".
Yvan KOENIG (from FRANCE mercredi 15 octobre 2008 17:08:43)
Maybe you are looking for
-
HELP, PLEASE.. I'm looking for a App that I can install on both my iPad and iPhone, then when I load a document, picture, or anything on that app on iPhone or iPad, it will Sync with the other Device so both devices will end up with the same file ...
-
Hi Get the ABAP in 21 days which is avialbale in the market better see the links and SAP help for knowing these chapters For BDC: http://myweb.dal.ca/hchinni/sap/bdc_home.htm https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc& http://www.sap
-
Problem in embedding a png file for a button's skin
I am trying to embed a png graphic as a skin for a button using actionscript class for a custom component. It has an error: "unable to resolve 'btn.png' for transcoding" - see method 1 code below. However, it works fine in method 2. Code are all show
-
Need example to create File names dynamically using File adapter
hello, I am mapping an IDOC to a flat file using XI and a file adapter. I need to be able to output a file name dynamically depending on the data in the IDOC. For example if the IDOC has 310 as the company code, the file name should be xyz.310 and i
-
Strange .plist Files Appearing in Preferences
Hi. I've posted this on the Waves forum as well as Digidesign, but just in case anyone here has seen something similar happen, I thought I would ask here as well... When I start up Pro Tools 7.4.2 and select any of the Waves plug-ins, the following 1