Question on NameTrans regexp-map in server config file...

I'm trying to set up redirects in my obj.conf file as such:
NameTrans fn="redirect" from="/al" url="/local/index.cfm?state=al"
My problem is when I us the following:
NameTrans fn="redirect" from="/in" url="/local/index.cfm?state=in" this sends the redirect to the root index.cfm file. It seems to see /in in the url and ignores the redirect and assumes I'm looking for index.cfm.
It has been suggested that using NameTrans regexp-map might be able to resolve this problem but I'm not sure how. Can anyone familiar with regular expressions help on this one?
Thanks in advance.
Dave

Hi all,
I am having a default server running on port 80 and virtual servers on port 6666,5555,4444
default server is running on port 80 and virtual server is running on 6666.
when I am typing www.abc.com in browser it is contacting the application which is running on port 80
I want to connect to the application which is running on port 6666 by typing www.abc.com(not by typing www.abc.com:6666)
and even url redirection is not possible(www.abc.com/url)
can any one give me suggestion
Thanks & Regards
madhu

Similar Messages

SpamAssassin questions (sa-learn, show score in subject, config file)

I'm currently trying to adjust SpamAssassin, but although I found lots or articles in this forum about it (some of them are quite useful , I still have some open questions looking forward getting assisted with.
(Manually training SpamAssassin)
I collected some spam on my local computer's inbox. Uploaded the /Messages directory to the server. Connected to the server via terminal, as root. Executed "sa-learn --showdots --spam /Messages". Fine.
Now I read that I had not to use root user but user "clamav". Can anyone shortly explain why I need the user of the virus filter to learn the spam filter ? How makes this sense ?
If I have to do so, I simply can retype "su clamav sa-learn --spam /Messages" when being logged in as "root" to execute sa-learn as user "clamav", correct ?
At root's directory I found ".spamassassin" folder containing the bayes learnings. Can I safely delete this folder ? I hate to have non-required data wasting diskspace...
(Show spam scoring in subject line)
At server admin tools / Mail service, I modified the line "attach subject tag". My goal is that it displays the "spam hits" a message achieved to allow users doing custom rating in their local mail client (e.g. having rules like "if message has 10 points then it is spam, otherwise not", etc.).
At spamassassin.org I verified (and used it this way on my old server) that the tag is "SCORES" (without ").
For example in the config file it would state "rewrite_header Subject *Spam(SCORE):"
But the server admin tool seem not to accept this. It states "SCORE" without replacing it. I tried also HITS
Any idea ?
(Manual modifications at the config file)
As indicated above I want to fine-tune SpamAssassin as done on my old server and therefore would need to know where the config file is located.
At the forum I read that it is /etc/amavisd.conf and that SpamAssassin's config files are ignored widely. But... in amavisd.conf I found nothing about spam.
So... which file do I need to edit ?
Thanks to all helping me

Sorry, this was a double-post. @admin: Please remove it.

IChat Server Config File

Where is the manual config file for this service located?

Choose Go to Folder from the Finder's Go menu and provide /etc/jabber/ as the path; the file may be named jabber.xml.
(34893)

Report server config question

We have Application Server (LINUX) ,In formwebconfig it refers to default.env or development.env depanding on the configration passed.
But as I can just run on report server on the application server, In the configuration file rwbuilder.conf file
<property name="sourceDir" value="your reports source directory">
I can specify the source directory, where I will be storing my reports.
Is there a way I can store REPORT_PATH in default.env Or development.env .
If you want clarification , Let me know

Hello,
The variables defined in the envFile (default.env for example) are used only by the Forms runtime. The reports server is an other process that will not use the variables defined for the Forms runtime.
A solution can be to define REPORTS_PATH in an environment section in the reports server configuration file and use in Forms the parameter envid to select the right environment :
More details about the "Dynamic Environment Switching" in :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1013352
Regards

WebLogic Server 10.3.4 external config files

Hey,
i have a question. I have external configuration files, and i dont know where to place, or better how to add the path where the configurations files located to WebLogic Servers classpath ?
I worked with JBOSS and there i added some lines in the start script. In glassfish there i can make it via administration gui.
The files are *.cfg files and the error output is this:
PATH_INSTANCIA:
log4j:ERROR Could not read configuration file [nullCONFIG.cfg].
java.io.FileNotFoundException: nullCONFIG.cfg (No such file or directory)
Thanks in advance :)

Hi Jack,
You will have to add the folder where the config file is present to the WLS classpath. Modify the CLASSPATH in setDomainEnv.cmd/setDomainEnv.sh (Take a backup of these files - just in case :) ) to include the config file folder path.
And restart the server and WLS should be able to pick the file.
In your code you can have the line as follows
Thread.currentThread().getContextClassLoader().getResource("filename")As you have already added the folder to the classpath, it will be able to get the reference to the file.
Thanks,
Patrick

Java bean + Map Tile Server

We have Oracle 10g Release 2 And AS + Mapviewer Patch 4.
Question:
Is Java bean based API can use map tile server, i. e. to fetch tile from cache of Map Tile Server?
Why i asking?
We use function addMapCacheTheme, and mapviewer takes pic from the Map Tile Layer.
In user guide no ever mention about this functions and about ability of java bean to use Map Tile Server.

You can find a sample Java Swing application that does just that on my blog here:
http://oraclemaps.blogspot.com/2008/09/displaying-map-tiles-in-your-java-swing.html
It contains full source code and can be easily configured to display map tiles from any MapViewer instance.
thanks

How to View BI Server Config parameters with Jconsole

Hi Experts
I want to examine the OBIEE 10g Server config params using the JConsole. I tried to start the Java agent by, navigating to the directory *"<oraclebi home>\systemdmanagement”*, and issuing the command *“runagent”.*
I guess I am missing some options /variables that I would need to pass when issuing *“runagent”.*
Please suggest . Thanks in advance.
Edited by: 858793 on May 22, 2013 6:42 AM

one you have the data in the infosource, for performance and holding history, you shoudl move the data in a ods or a cube.
ODS for daily report, only daily data no history
CUbe for historical Reporting and daily reporting.
you wil need to create update rules. and process chain to load data in yoru data targets( ODS or CUbe). then create a query on them. play with the query how you want the data to show. try to USe 7.0 as its more flexible if not 3.5.
you can broadcast it straight to e-mails using web broadcasting. other wise create web template( as define in the steps in the previous post).
remember do everything in yoru SANDBOX system or Development system. do not under any circumstances do this in production or testing.
any question feel free to post
hope this helps.
Amer

VI Server Config in LV 8.0

Greetings All,
I've recently installed LV 8.0, and have been starting the process of porting a distributed application (with an RT component) into a LV 8.0 project. So far, it hasn't been too promising. One of the main stumbling blocks appears to be figuring out the new way to configure VI Server over TCP using multiple application instances. In fact, I can't even get the "Real-Time System Manager" to work with the simplest of tests:
To illustrate the difficulty, try this:
1) Open a new project.
2) Add the PXI RT target to the project.
3) Add a new test VI (under the PXI target), and set it up to do something trivial. (Add some numbers, display a while loop counter, etc.)
4) Deploy and run the test VI on the PXI
5) Open the "Real-Time System Manager"
Even after configuring VI server for both the project and the PXI, I get the following error message:
"Real Time System Manager Error:
Can not connect to [Remote_PXI].
Please ensure that VI Server is enabled and this machine is allowed to connect"
It must have something to do with this new "multiple application instances" business in LV 8.0, but I really don't know what it is. I have used VI Server over TCP for several years and have never had any problems connecting remote PCs. And in fact, the same VI server config settings (for PC and PXI) that worked for LV 7.1 appear to be inncorrect for 8.0. I have set the parameters in the "master" options dialog, as well as in the project dialogs -- for both the PXI target, and the Desktop PC. (Default port 3363, TCP enabled for all clients and users.)
Can anyone shed some light on this? If there was any option to bypass the LV project when working with the PXI in LV 8.0, I would be trying that next. However, since the NI engineers have eliminated this option from LV 8.0, my previous experience in this area appears to be completely obsolete. It looks like I'm completely stopped in my tracks until this difficulty is sorted out.
Thanks in advance for any advice you can provide,
-- D.
www.movimed.com - Custom Imaging Solutions

DAQ Dude,
I know you've said you've been looking through the help, but have you checked this? The TCP/IP must be enabled as it is not by default.
Complete the following steps to configure the VI Server.
Select Tools»Options to display the Options dialog box.
(Optional) The default VI Server configuration is suitable for most applications. Select VI Server: Configuration from the Category list if you need to change this default configuration. The default configuration allows ActiveX to call LabVIEW, but does not allow TCP/IP as a protocol. To use TCP/IP with other LabVIEW applications, place a checkmark in the TCP/IP checkbox and configure the VI Server: Machine Access settings.
If you want to control browser access to the VIs or specify which VIs remote applications can control, configure the VI Server: Machine Access and Exported VIs options.
Click the OK button to close the Options dialog box and save the changes.
Note If a target in a LabVIEW project supports the VI Server, you can configure the VI Server for the target using the Properties dialog box for the target. For example, use the My Computer Properties dialog box to configure the VI Server for the My Computer target.
Error 66 is "LabVIEW: The network connection was closed by the peer," as you suggest, but can be seen by improper VI server configuration settings as well.

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Problem with mapping parameter when specified through an XML config file

I have decided to attept to stipulate UDT mapping parameters from C# to Oracle in the AppConfig File.
The original code (which worked) was as follows:
namespace RoyalLondon.Processes.Oracle.Dto
[OracleCustomTypeMappingAttribute("TEST_SCHEMA.T_PROJECT_CODE_CHANGES")]
class ProjectCodeChangeTableFactory : TableFactoryTemplate<ProjectCodeChangeTableDTO>
So, I've commented out the [OracleCustomTypeMappingAttribute line and added the following into the config file:
<oracle.dataaccess.client>
    <settings>
      <add name="ProjectCodeChangeTableDTO"
       value="udtMapping factoryName='RoyalLondon.Processes.Oracle.Dto.ProjectCodeChangeTableFactory, RoyalLondon.Processes, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'
                         typeName='T_PROJECT_CODE_CHANGES'
                         schemaName='TEST_CON_DEV'"/>
    </settings>
</oracle.dataaccess.client>
This yields the following error message:
Unhandled Exception: System.InvalidOperationException: Custom type mapping for ' RoyalLondon.Processes.Oracle.Dto.ProjectCodeChangeTableDTO' is not specified or is invalid.
All the documentation I have read suggest that this ought to be ok. Is there anything obvious I am missing?

ummm, nevermind.
Turns out I hadn't updated the list of files that went in my servlet's jar file. I was recompiling the jar file successfully each time, but the list of files being included needed to contain a new class. This was a really stupid mistake on my part.
Just one of those things that I was bound to solve as soon as I broke down and posted something on the web. Sort of like taking your umbrella with you to ensure that it won't rain.
If anyone is reading this I am sorry I wasted your time.
Jon

IRC Server Config and CGI:IRC

Well, I am trying to set up an IRC server with a web based cgiirc client program. The problem is that I can't get a working server. At all. I really can't get the config file to work for me, it just plain makes no sense. At all. Ever.

Hola Francisco, me parece muy buena idea tu IRC. Hemos detectado la necesidad de tener Soporte para Clientes a trav�s de IRC (Para clientes extranjeros, es fundamental por el ahorro de costes).
Si lo vas a dejar en alg�n sitio estoy muy interesado en verlo y comentar algunas cosas. Hazmelo saber si no es molestia.
Un saludo

Possible to add and persist elements in server config, for use by cons ext?

I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

Error when trying to open 'Hyperion FDM App Server Config Manager'

Hi,
When I am trying to open FDM App Server Config Manager/Load Balance configuration/Task Manager configuration,I am getting the below error
' COM object with CLS ID-{xxxxx} is either not valid or nor registered'
Could any one explain me what this error mean and what impact will it have on existing FDM application.
Thanks in advance

Hi,
Could you please check the IIS log and see what’s the error code?
Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
Thanks,
Simon
If you have feedback for TechNet Subscriber Support, contact
[email protected]
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Content server - config?

Dear all,
I am working on DMS with Content server.
Particullarly now in CONTENT server CONFIG.
Any one could kindly help me out with the procedure and documents.
Regards,
John.

Dear Ronald,
Just now saw your reply.Thanx for the care.
I was working in a different location for past 2 days so i couldn't see the mail.
Actually v r trying to shift our db to SAP.And we r using DMS(Document Management System) and using webdocuments a BSP for interaction with database(Content server.)
So v want to push up our data into <b>HTTP enabled CONTENT SERVER</b>.For this i need help on Cofig. of content server.
Awaiting your reply.
Thanx & regards,
John wesley.

Xdo delivery config file: unknown server elements

I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.

I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.

Question on NameTrans regexp-map in server config file...

Similar Messages

Maybe you are looking for