Question on Olite and its role

Hey guys I am a newcomer to BPEL. I have been playing around with this stuff for a couple of days. The first time I ran the BPEL server I set up Oracle 10g as the database to store all the process information and so on. I avoided olite at that time because I was accessing a remote database. I setup oracle 10g and ran the scripts as described in the IRCA zip and all was well.
So now I have reenabled olite and my question is, in the IRCA zip there was a directory called olite that had olite specific scripts in it. There was no README in there however. Am I correct in assuming that the olite datbase if reenabled already hsa the tables required for the BPEL PM to work? Or do I have to run the scripts in the olite directory and if so then how and in what order? I hope my question makes sense. I am just trying to get comfortable with the whole environment.
Thanks in advance for all replies to my question.

OLite that comes with BPEL standalone version (not mid-tier) already has the necessary schema. You dont need to run any other script.

Similar Messages

Semantics and its' role in Business Services

Role and importance of semantics in the context of services and SOA:
Semantics refer to interpretation of information and not the literal definition of information/ data. Applying semantics to information turns it into knowledge. Semantics is the act of applying references and drawing conclusions given a set of more scientific informational constructs. Typically semantics are derived using the context in which information is presented. Transposition on the other hand allows applies the rule of inference where in one can draw conclusions on the implication of truth based on some set of facts.
Read more about this at <a href="http://entarch.blogspot.com/2007/10/semantics-and-its-role-in-business.html">Surekha Durvasula's</a> blog.
Surekha is an Enterprise Architecture of a large retail company

Hi shalini,
        Thanks for the reply and can you please say me the menu path for T.code BUSD
And can u please say the difference between 4.0 and 5.0 versions
Regards
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

Get question id's and its corresponding answer id for given Doc id's

Hi,
I am trying to write a program which gets the Equality values (Questionaire - Erecruiting) like :
1) Gender
2) Care Resp
3) Care Type
4) Ethnic Origin
5) Religion
6) Disability
7) Sexual Orientation
8) Age Range
And move it to an internal table which has each Equality as a field.
I referred to the following tables in order to get the question id's and its corresponding answer id's for questionaire.
1) hrp5141
2) hrp5125
3)T77RCF_INFDAT
And i tried to fetch the equality data using the class CL_HRRCF_QA_BL. This class returns the values from hrp5141. It also returns the object id, answer id and answer text. CL_HRRCF_QA_BL class also intern calls the function module HRHAP_DOCUMENT_GET_DETAIL, which gets the set of questions and its answers. But this question id's and answer's differ for document id's (QA_DOC_GUID).
Here the problem is the object id for Doc id's (QA_DOC_GUID) are differing.
Example 1: I have taken first QA_DOC_GUID - BF2C554821CFBFF180C5DKDINGKGNSKE as input to check its question and answer using CL_HRRCF_QA_BL class.
The question id is here I am assuming is 20366558 and the corresponding answer id is 20368559 for Gender.
Example 2: I randomly picked one more QA_DOC_GUID - BAS06AE4533374F1B3CF0018F346808A. The question id here is 50368915 and answer id is 50368918 for gender which is different from the first example.
I am not able to decide on other fields as the answers for it could be generic viz., YES, NOT, Prefer not to answer etc. Whereas Gender holds the value of either Male, Female or Prefer not to answer, Religion holds Religion name or Prefer not to answer value and similarly Age holds the age range or Prefer not to answer value.
Can anybody suggest on how to get the equalities values (the question id's and its corresponding answer id's).
Appreciate quick response.
Thanks in Advance.
Thanks and Regards,
Rashmi

Hello RichR,
To setup an iCloud account, you don't need an existing email address. Take a look at this article which contains more information about iCloud email:
iCloud: Mail overview
When you set up iCloud with a new Apple ID that doesn’t use an existing email address, your new Apple ID ends with @icloud.com and is the email address for your free iCloud Mail account. If your Apple ID doesn’t end with @icloud.com, @me.com, or @mac.com, you must set up an @icloud.com email address before you can use iCloud Mail.
If you already use iCloud Mail with an @mac.com or @me.com email address, you also have an @icloud.com email address. You have an @icloud.com equivalent for every active @me.com or @mac.com email address or alias that you have as part of your account.
After you set up your iCloud Mail account, you can sign in to icloud.com/#mail and start using iCloud Mail on the web right away. To use iCloud Mail on your devices, you must set it up on each device. For more information, see Set up iCloud Mail on your devices.
Thank you for contributing to Apple Support Communities.
Take Care,
BobbyD

What is Exchange Virtual directory and its role?

Hello there,
I am new to Exchange and I started reading about Exchange Virtual directories. I am struggling to understand the concept behind Virtual directories in Exchange and what is the role of this component. Can someone please shed some light and better yet supplemental
information to help me understand the concepts behind it? Let me know please. I am looking forward to any reply that would help.
Regards,
Lotusmail1
Franz Garcia

Hi,
Thank you for your question.
Exchange virtual directory is a directory which store some necessary URL to point to correspondent web page, those URL can provide service for user by Exchange server. it include the following component:
On Exchange CAS server:
Autodiscover: An important function of the Autodiscover service is to provide access to features for clients that are connected to your messaging environment. These features include the web-based offline address book (OAB), the Availability service, and
Unified Messaging (UM). The Autodiscover service must be deployed and configured correctly for clients to automatically connect to features.
ECP: The Exchange Control Panel is a Web application that runs on a Client Access Server providing services for the Exchange organization. This Exchange Control Panel is installed automatically when you install a Client Access server. To manage Exchange
from just about anywhere, you simply need to enter the URL path for the application in your browser’s Address field. You can then access the Exchange Control Panel. By default, the Exchange Control Panel URL is
https://yourserver.yourdomain.com/ecp.
EWS: Exchange Web Services virtual directories support the calendar sharing and other functionality offered by Exchange Web Services. The Exchange Web services included in Exchange provide an XML messaging interface that enables you to manage Exchange store
items and access Exchange server functionality from client applications.
Microsoft-Server-ActiveSync: Exchange ActiveSync is a client protocol that lets you synchronize a mobile device with your Exchange mailbox.
OAB: An offline address book (OAB) is a copy of an address list collection that’s been downloaded so a Microsoft Outlook user can access the address book while disconnected from the server. Microsoft Exchange generates the new OAB files and then compresses
the files and places them on a local share. You can decide which address lists are made available to users who work offline, and you can also configure the method by which the address books are distributed.
OWA: By default, when you install Microsoft Exchange 2013, you enable Outlook Web App. Microsoft Outlook Web App lets users access their Exchange mailbox from almost any Web browser.The Client Access server role provides proxy and redirection services for
Outlook Web App.
PowerShell: The Exchange Management Shell, built on Windows PowerShell technology, provides a powerful command-line interface for Microsoft Exchange Server 2013 that enables automation of administrative tasks. With the Shell, you can manage every aspect
of Exchange. You can enable new email accounts, create Send and Receive connectors, configure database properties, manage distribution groups, and more. The Shell can perform every task that can be performed by the Exchange Administration Center (EAC) plus
things that can't be done in the EAC. In fact, when you do something in the EAC, it's the Shell that's doing the work behind the scenes
On Exchange mailbox server:
PowerShell: this is the same with front CAS server.
We could refer to the following link:
https://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Jim Xu
TechNet Community Support

Weird question about GNOME3 and its new search function

Ok, it may sound a little strange and I fear for your answers but here is the question...
Is there any way to make gnome3 not to search for ABSOLUTELY EVERYTHING when "typing to search" in the menu?
I mean, for god's sake, I was testing all the menus and so on, and suddenly typed "3" and a pair of NSFW movies showed up in the screen. WTF????!!! xD
Is there a way to stop it showing recently opened files? XDD
I do not like this "feature"....

You can remove recent documents by deleting this
rm ~/.local/share/recently-used.xbel
You can stop logging all recent documents by creating a folder there, i.e.,
mkdir ~/.local/share/recently-used.xbel
Some tutorials recommend making that folder un-modifiable, but I'm not sure it's necessary
chattr +i ~/.local/share/recently-used.xbel

Question: Internet Connect and its symbol in the menu bar

Hello,
I have set up "Internet Connect" to show its status in the Menu bar. When I am connected, I see the black/gray symbolic radio waves. I have noticed, that this icon is in company with a time counter, when my MAC gets the ip address via DHCP rather than having a static ip assigned.
On a "DHCP MAC", sometimes this time counter disappears for a moment and gets back after a couple of seconds. During this drop out, the icon with the radio waves remains unchanged which is usually "all black" as I have very good signal strength.
Does anybody know about the reason/cause for that drop out of displying the time counter? I really would like to know the technical background, as I found out that during those "time counter drop outs", my AirTunes music stream tends to be broken as well. Even though it seems that the signal is still OK (all radio waves in the symbol are black).
Thx for any hints on that!

Great, thank you also!
Also, on interference, through much testing, I find that even one signal can interfere with it's self by bouncing off different surfaces.

Question regarding cfimage and its' hotfix

Ok, I've browsed through numerous threads regarding cfimage
issues and the various hotfixes.
Seeing as I am not the administrator of my server's copy of
ColdFusion, I wanted to see if I could verify that the latest
hotfix was installed. I had seen someone post a version number in a
thread from months ago, but I do not have the same version number
and do not know how valid that build would be as of now anyway. The
version number that I get when retrieving the server info is
8,0,1,196946. Is this consistent with the latest cfimage hotfix
version?
On a side note, if anyone has a moment and can test
something:
I'm having trouble when resizing/writing certain jpgs (I've
tried various methods at this point, including cfimage of course).
http://img299.imageshack.us/img299/2839/imageqp8.jpg
is an example of an image that is giving me problems (hanging while
processing, leading to a timeout). If someone who is certain they
have the hotfix could try this and verify that it works for them,
it would help narrow down the list of potential issues for me.
Thanks for any help.

> I wanted to see if I could verify that the latest hotfix
was installed
I could be wrong, but I think you will need administrative
access to determine the hotfix level. I believe
CF8
Cummulative HF1 includes some image related fixes. However,
there were two image hotfixes. Unfortunately both were released
with the same number, but on two different dates. AFAIK, the only
way to tell if the later image hotfix is installed is to check the
file date. It should be
08/15/2008
I ran a few tests on the image and had no problems with it:
CF: 8,0,1,195765
Image Hotfix (hf801-71557.zip - 8/15/2008) installed
O/S: XP
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403823

What is the use of Webcat,What is its role in obiee 10.1.3.3.4

Hi ,
I m new to OBIEE and I want to know more about Webcat.Could somebody explain in detail about webcat and its role in obiee.Thanks in advance.

Have you tried looking at the documentation first?
http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm
"Answers, Delivers, and Interactive Dashboards User Guide"
"Definitions of Common Terms in Oracle BI Answers"
Presentation Catalog

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

HT1311 i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

If you are now in the UK then you can try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

When i boot i get a flashing folder with a question mark. disk utility doesnt work or read my harddrives to boot with. i installed a new SSD and its not reading that either. i have a macbook pro 2011, any help?

So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.

ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store.

SharePoint's role and its task assignment

SharePoint's role and its task assignment list below:
*Workflow
*App
*PowerShell
*SharePoint migrering
*Enterprise Content Managment
*Business Intelligence
*social business platform
*SharePoint analyst
*SharePoint Enterprise Search
*Document management
*SharePoint Cloud
*SharePoint BDC (Business Data Catalog)
What more am I missing that is important to add?
Please remember that I'm a newbie in SharePoint 2013.

I understand you have added ECM but I would also add Records Management, Machine Translation Service and Community Sites.
If you want to add features then you should also include Office Web Apps, Cross Browser Support and Responsive Web Design.
Amit

HT1420 I can't use the new I pad on I store its asking for job questions which I don't no the answer I put the right answer and its sayin wrong

I bought a new I pad I want to download some movies I am going away tonight and its asking for job security questions at which I put the answers and it says wrong I can't remember what I put years ago what do I do I just bought a $100 I tunes card

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551

How do I reset my Security Questions? I dont remember them, and its not letting me purchase anything.

I need help please! How do I reset my Security Questions? I dont remember them, and its not letting me purchase anything.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96639)

HT5312 im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(98991)

Question on Olite and its role

Similar Messages

Maybe you are looking for