Question on originality of BH 503..!!

I recently purchased a Bluetooth headset BH 503 from naaptol.com. point is among the tons of replica of Nokia headsets... i wish to know if i have received the original accessory or replica? the box, packing and set seems original enough. is there anyway to check it online. and if not, i request Nokia to consider this , as i am sure lots of consumers would be asking the same question about originality of there Nokia handsets and accessories. awaiting your reply. thanks in advance.

buddy original is extremely loud like a china phone but clear , can hear from a corner of room
Check attachments
Attachments:
fake503.jpg ‏488 KB
original503.jpg ‏45 KB

Similar Messages

Question on original work and actual work

Hey folks,
Sometimes the simplest things in Project befuddle me. I'm working in Project 2010 Standard. I have a whole bunch of "Fixed Work" tasks. This is a pretty simple project, and I haven't done baselines or anything like that.
So let's say I have a task, "Build X" that is was originally estimated as 4 hours of work. That is entered into the Work column.
During the project, Build X gets completed, and I learn that it only took 2 hours of work. I want to enter this into Project so that we know that:
Task "Build X" is 100% complete
The actual work was only 2 hrs
The original estimate was for 4 hrs
However, if I enter 100% into either % complete or % work complete, Project changes the Actual Work to 4 hrs, which is wrong. If I set the Actual Work to 2 hours, Project changes % complete or % work complete to 50%, which is also wrong.
Is there anything I can do here that doesn't involve baselines?
Thanks!

sbattisti,
What have you got against setting a baseline? A baseline captures your original plan. The schedule will be dynamic and as things happen Project updates that dynamic plan to reflect what really happened. So no, there is no way to do what you want without
a baseline, except perhaps of capturing the original work value in an extra field (e.g. Text1), but there's no point in doing that.
Set a baseline. That will capture "Build X" as being originally planned at 4 hours work. When you later find out that it only took 2 hours, you enter that into the Actual Work field and set the Remaining Work field to zero. That tells Project that
the task is in fact complete and it only took 2 hours. If you then display the Baseline Work field you will see that the original plan was 4 hours. You can also display Work Variance.
Hope this helps.
John
OK, thanks very much. I'll do that.
I have a follow-up question, but it's not really directly related, so I will post separately, thanks!

Security questions are different than questions I originally answered can't access iTunes for new ipad

Need to answer security questions to access new iPad, security questions are different than what I originally answered.

Doubtful.

Capacity Leveling Question, Retaining original dates

Dear colleagues,
We are using standard dispatch functions in CM22. Here is a quick depiction of the problem.
Steps
1. Production order dispatched to a future date
2. Order is deallocated
3. System seems to retain the dispatch date of the production order and does not revert to the original date after deallocation
I realize that there may be settings that can help in retaining the original dates of the production order prior to the dispatch.
Have any of you set up the system to retain the old dates? Please advise.
Thanks,

Hello Pravan,
I have production order with basic/scheduled start/finished date= today's date.
1) I have made leveling. Scheduled finished date is changed to today's date+ X days.
2) I have made deallocation. Scheduled finished date is back to date as before dispatching: today's date.
I'm not sure what settings controls that, but if you will send yours, i will compare it with mine as will send you a difference if any.
Best Regards,
Andrey

Question about Original Batch for IS-Mill

Dear guru.
I must assign more than one original batch to a production order. Can i do this?
Thanks.

Hi,
It is not possible to assign 2 batch numbers to a product coming out of a production order.
I am still not very clear about your requirements.
However, I come across requirements of using only one RM batch in a FG batch (not vice versa). This can be achieved. You need to do an enhancement which runs at the time of reservation/component batch determination/process order release. It reduces the quantity of FG as per available quantity of RM and may create a new proction order for remaining quantity.
Thanks
Ashutosh

Interesting question for original iPhone owners

Hi,
I was looking at the back of my device today while it was out of the case (more then usual) and when looking at the two lines of text (below the word "iPhone" but above the memory size icon...in my case mine says "8GB" with a square around it, if you look at the two lines really closely it looks like the lines of text are not straight (more on the right part of the two lines verses the left part of the two lines.
When I turn the phone sideways looking at the text, then it pretty much looks aligned. I'm wondering if what I'm seeing is just an optical illusion when looking at it right side up or are the two lines really not imprinted on the device in a straight line?
Intersted to hear other owners in their findings. It's kinda bugging me now so I wanted to ask other people if they see the same thing as I do.

Are you referring to the second line, beginning roughly with the IMEI number? Using a Schaedler Precision rule, magnification glasses, and a lot of squinting under a halogen lamp, it appears the capital letter height of IMEI is approx. 1/64th of an inch taller than the capital letters ~ FCC ID ~ on the far left of that line. 1/64th is the smallest unit on this ruler. The IMEI on my phone is aligned on the upper portions of the FCC letters, but not along the IMEI baseline of that second line. It's optically insignificant to me, especially since it's on the back and in a case. Hope this helps.

PKI Design / Migration - Questions

Hello,
Our organization currently uses a single-tier enterprise root CA for issuing certificates; We are growing and I would like redo this design in accordance with MS Best practice.
I just have a few questions:
My original thought was to add an enterprise subordinate CA and decom the Enterprise root CA we currently have running but I am not sure if this possible or recommended as I am reading many articles stating that you should deploy a standalone root CA (offline)
then create a enterprise subordinate CA for issuing certificates.
If this is the case how would I migrate servers / users over to use the new PKI infrastructure without causing service disruptions?
Thank You

I just want to have some answers to give MGMT when they ask.
Here's your own answer:
...and I would like redo this design
in accordance with MS Best practice.
Brian gave you best practice.
1 X standalone root CA (off line) – for security
2 X issuing CA's - Enterprise subordinate CA:
2X - for redundancy
Enterprise – so that they use AD for certs, CRL, autoenrollment etc.
I would also add that if you will not be revoking existing certs issued by the old CA, you may increase CRL publication interval on the old CA from default one day to 99 years. This basically leaves you with static CRL and static CDP web site (you don't
need to publish CRL on the old CA each day).
http://blogs.technet.com/b/pki/archive/2012/01/27/steps-needed-to-decommission-an-old-certification-authority-without-affecting-previously-issued-certificates-and-then-switching-all-operations-to-a-new-certification-authority.aspx

HT4859 how backup photos originally synced on my computer, to backup on icloud?

I just began using iCloud for my iPhone4. It is my understanding any photos taken on my iPhone4 "after" I've begun using iCloud, will be backed up from my Camera Roll into iCloud. However, I also want my previously taken photos (before I began using iCloud) to also be backed upon on iCloud, so that I don't have to keep updating via iTunes also. Is there a way to make iCloud back-up my previously taken photos?

Additional related questions from originally poster:
Related question: Some places I read that iCloud is only a temporary (30 days, 1000 max photos) storage location (i.e. Photo Stream). Other places I read that iCloud will always back-up all of the photos in my Camera Roll. Which is correct?
Another related question: If iCloud does indeed backup photos in my Camera Roll, will it not also back-up photos in "albums" that I've created? To utilize iCloud back-up, must I eliminate all "albums" and go back to simply having all photos on the Camera Roll?
I am new to Apple products, but this all seems much more confusing and less user friendly that windows and Android management of photos... am I missing something?
Thanks to anyone that provide me an authoritative answer on these questions from an Apple newby!

HT5622 i dont remember answers to questions asked when i bought my first ipad. since then i bought an iphone5s and 2 mini ipads and cant download games or music unless i do it through the 1st ipad. help

how do i find my answers to the security questions i originally answered when i bought my first ipad?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

HT1689 How can I change my security questions/answers as I cant remember the answers to my old questions and it keeps locking me out

How can I cahange my security questions and answers?...I keep getting locked out as I cant remeber the answers to the questions I originally set.

Kappy's Some Solutions for Resetting Forgotten Security Questions
(only solutions)

Resetting AppleID security questions

Good Day
I have not forgotten my password and can access my account with no problem however i am having a problem authorizing my pc as it asks me to enter my ID and Password and once i have done that it then asks me to answer two of the three security questions i answered when setting up however i cannot remember them at all so now i would like to know if i can reset them in anyway. I have e-mailed apple support and all i got was i must reset my password and as you can tell by now that is not the problem i am having.
Thanks

HI,
As you know the password and can access your Account in various places then Start Here
This is the Apple ID Support page
It is a portal to create a new Or Login with an Existing Name.
Choose Manage Account to Login.
Once you have logged in at the next page you then go to your account.
On the left is a Menu with Security and Passwords.
As you entered the page with your passwords you don't have to re-enter any details.
You can change the Answers to the Question your originally set or you can change both Questions and Answers (I would not suggest changing Questions only as you would still need to remember the answers that you say you can't ast the moment )
9:41 PM Monday; May 28, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

TS1702 How can i delete my iTunes Account?

Because of the new Security questions that iTunes has put on my Account, I can not download new apps to put on my phone. I have been in contact with Apple, iTunes and iCloud. Now I am to the point I just want to delete my current account and make a new one. This is so stupid, iTunes has been no help to me at all, the Apple people where rude to me and the iCloud has not even contacted me back. What am i soppose to do. I am very upset with all 3 of these company's, if you are going to change you product tell the people that are using it that you are going to change it and if there is a problem fix it. This is stupid i am now going on 2 weeks of not being able to download anything. I think that iTunes should allow me to at least make my own security questions and if you are going to make them for the customer at least let that person know the answer to there own account. I am going to say it again and again this corruptions needs to take responsiblity of there actions and if there is a problem fix it....

Actually Brooke, iTunes did that for additional Security purposes. It's not corruption. If iTunes is corrupt, they could've not entitled customers for refund when the customers does not want what they bought. If you're going to delete the account, all of your purchases will be gone. The security questions are originally set-up by you. If you can't remember setting them up, iTunes would likely ask you three questions. If it is asking you 3 questions, it means it's asking you to setup the questions now. If it's asking you 2 questions, it means it has been configured by YOU before. Go to appleid.apple.com to manage your apple id and see if you have a rescue email address where you can easily send the reset security questions email.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

Nokia C5-03 SIM memory full... but NO SIM MESSAGES...

Hello everyone. I'm sorry if this is in the wrong section, I'm new here.
Recently my C5-03 has a flashing envelope on the screen saying the SIM memory is full.
I searched on Google and found some topics saying to go to Messages -> SIM messages and delete them...
But problem is... no SIM messages appear! I'm desperate and can't find any other solution... what can I do?!
Solved!
Go to Solution.

Hi Hardstylehunt3r,
Thank you for your post and welcome to the Nokia discussion forums.
Sorry to hear about your issue but there certain steps you can try to resolve this issue.
Memory full messages may occur if there are too many applications running at the same time or if there is not enough free space in the phone memory. Depending on the error message, the following actions can be taken:
"Memory Full: Close some applications and try again"
In this case there are too many applications active at the same time. The problem can be fixed by closing some of the applications:
Long press the Menu key to see the list of active applications.
Select the applications which are not needed and close them.
If this doesn't help, switch off and restart the phone.
"Memory Full: Delete or remove some data from C: Phone memory"
The phone notifies you if the phone memory or memory card memory is getting low. There can be different error messages shown this situation, e.g.:
"Memory Full: Delete or remove some data from C: Phone memory"
"Disk Full : Automatic retrieval of mailbox for exchange disabled"
To free phone memory, transfer some data to the memory card with the File mgr application (select Menu > Applications > File mgr.). Select or mark files to be moved, select Options >Organise > Move to folder and then the destination folder.
In order to free memory, you could also remove or move the following:
Messages from Inbox, Drafts and Sent folders in Messaging.
Retrieved e-mail messages from the phone memory.
Saved Web pages. Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache).
Saved images, videos, or sound files.
Contact information.
Calendar notes.
Downloaded application packages.
If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
Any other data that you no longer need
If possible, use the memory card instead of phone memory in the Camera application (selectOptions > Settings > Memory in use to define the memory where the images are stored). You can also use Nokia Suite to transfer images and video clips to your PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
Or you can try this:
To release the phone memory and change the email store from the phone memory to the memory card, follow the steps below.
Select Menu > Messaging and Options > Settings > Other.
Select Memory in use> Memory card.
To question Copy all messages to the new message memory?, select Yes.
To question Save original messages?, select No if you want to release the phone memory or select Yes if you wish to keep the original messages in the phone memory.
Alternatively you can sync your phone with Nokia suite and clear the messages that way if it is not showing on your device. Full instructions on how to sync can be found on the follwing link:
http://support.ovi.com/osc/en_GB/service/ovi_on_your_computer/howto/support-suite-syncing-and-backin...,
If this doesnt help you can try doing a soft reset by inputting code *#7780#. This wont delete any data but rather reset your phone settings. If the device ask for a default code this is usually 12345.
There's a lot to try to resolve here so give it a go and let me know if any helps.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

How do I get my newly installed airport card to work with SKY?

+This question was originally posted on the G5 iMac section, but I think in retrospect it would be better here. Sorry for my mistake Administrator+.
Here's an interesting one for all you good people. Just bought and paid for an airport extreme card to pop into my little lad's G5 iMac, running Tiger(gggrrrrrrrr etc).
Managed to install it without a hitch.
Trouble is when I try and set it up to work with my SKY router (UK) it keeps telling me that my password is incorrect. The fibber! I know it IS correct as it is the one that SKY gave us and that we have successfully connected both my wife's MacBook and my own MacBook Pro with.
I have tried messing about with all kinds of configurations, but the set up assistants seem more bothered about yapping on about airport base-stations and computer-to-computer networks.
Now don't go telling me I need to get a base station to make it work. Please.
Can anyone offer some sound advice?
It does work on and off though. It works more often when the other Macs in the house are running (What-the-flip???)

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

Question on originality of BH 503..!!

Similar Messages

Maybe you are looking for