Question on Radio tuner and msi radio on getting it to work

Ok Iv installed MSI Radio, also got the radio card muted with the msi media center uninstalled that thing is just evil, problem now is the msi radio is not talking to my radio on my msi mega 865 deluxe, the msi media center 3 works with it, but i cant mute the radio card on the audio settings. The radio card starts up when msi radio starts up but none of the tuner options work, i get the fuzz in the back ground but the buttions are not talking to the mega 865's radio card what can I do I want to avoid the msi media center 3 because I will not be able to mute my radio and will have that annoying fuzzy stuff running in the back ground that will annoy me to no ends lol
MSI MEGA 865 Deluxe
p4 2.8ghz HT
1 gig of kingston Ram
MSI Geforce FX 5700LE 256mb AGP
MSI Mega Tv Tuner Card
80 gig Segate Baracuda
MSI 52x CDROM CDR/DVD Combo Drive
Windows XP PRO SP2 With MS PLUS! Digital Media Edition

at least you're getting somewhere with this now
what is this background fuzz you keep going on about? thats the sound of an untuned radio...
if you aren't happy with media centre 3 (who is? ) then make sure you fully uninstall it, and uninstall the mega radio program (for now)
turn off your pc and unplug the power lead for a few seconds then reconnect.
put into hi-fi mode and make sure radio is working - if it ain't working in hi-fi mode its not gonna work in windows. try tuning a few stations in, and then leave it set to a station you recognise...
if all is ok, then power into pc mode (making sure you turn off hi-fi mode first)
if you hear the radio playing when windows has started (as opposed to "background fuzz" now you have a station tuned in), open the windows volume control and look for the "Radio" slider, you might need to go into advanced properties (under options) and tick the box to show it. just tick the mute box, no need to adjust slider.
now install the mega radio program (it is found on the Mega 651 downloads page for correct version). now when the radio program starts and closes, it should automatically "tick" and "untick" the mute box in the Radio volume slider itself

Similar Messages

TS4268 Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps!

Forgot your security question in my account and I want to get it back

Forgot your security question in my account and I want to get it back

Provided your still able to log in to your Apple ID, you should be able to follow this link through and change them
https://appleid.apple.com/cgibin/WebObjects/MyAppleId.woa/192/wo/4tSJBrdAn9ISICR 0hw7ubM/7.0.67.17.11.3.1?menuOption=EditAppleIDAndPassword
Otherwise contacting support may be an option?

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

Well if your iPod is not appearing under Devices in iTunes when you have it plugged into a high powered USB 2.0 port, then that would explain why this newly loaded CD has not synced to it yet.
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Witch flash player do i download for a kindle Fire hd and how do i get it to work.

Witch flash player do i download for a kindle fire HD and how do i get it to work.

One option that seems to resolve the problem with Kindles connecting to the AirPort is to change the Radio Mode on the 2.4 GHz radio to use the "802.11b/g" setting. Note that this would impact any 802.11n clients on this frequency by effectively reducing their data rate to a maximum of 54 Mbps.
You would change the Radio Mode setting in the AirPort Utility, as follows:
AirPort Utility > Select the Extreme > Edit > Wireless tab > Wireless Options
Radio Mode: 802.11a/n - 802.11b/g
Click on Update.

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?

I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.

Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck

I have a go daddy email account and I can't get it to work on my iPad

I have a go daddy email account and I can't get it to work on my iPad

Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?

Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What do I need to do?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do.
I did try to download Firefox again, but still will not work.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

My acrobat printer uninstalled itself and I can't get it back working...How do I fix it???

My acrobat printer uninstalled itself and I can't get it back working...How do I fix it???

Hi edhones,
Please update Acrobat to v11.0.09 and check.
You might want to repair Acrobat from the 'Help' menu and check if it installs the pdf printer back or not.
Regards,
Rave

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

Question on Radio tuner and msi radio on getting it to work

Similar Messages

Maybe you are looking for