Question on Storage, Site Location; UB

please clarify ,
Question A
We create article for a SIte (one DC and one Store),Pur org,vendor, sales org.
1.Is it means we cant buy it from other vendors
2.if i maintain physically articl in one DC and 3 Store .Do i need to extand or what ? plz give t code or path to do it .
3. A storage loc automatically come . How it is comming .
Question B
Also we create Site as a master data.
where we create the Storage location . I fould it is not in SPRO - enterprise structure .
cozz i need it do the STO
Question C
i did a mark up of 15 % and procured for 50 and STO sold to a Store 57.7.
No accounting documents are generated ? since its proforma .
at time of billing i can see Statistical value as 57.5
i want to where this 7.5 /- diff price hit ?

Hi,
You have to create site as master data only...
Site will not display in SPRO
enter SITE No in OX09
it will lead to creation of storage location.
Create storage location.
Retail Process
Store create STO to DC (ME27)
DC create Delivery based on STO (T.Code - VL10B)
Do PGI (VL02N)
Store create Good Reciept based on Delivery (MB0A)
But In Real Scenario
STO is created in POS
This data is uploaded to Retail server as IDoc
And
Same Good receipt is done in POS and uploaded data to Retail Server
Same process is happing for price, promotion, ect.
Detail Go through Retail Document
http://help.sap.com/saphelp_46b/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm
Regards
Vijai Jain

Similar Messages

LDAP design question for multiple sites

LDAP design question for multiple sites
I'm planning to implement the Sun Java System Directory Server 5.2 2005Q1 for replacing the NIS.
Currently we have 3 sites with different NIS domains.
Since the NFS over the WAN connection is very unreliable, I would like to implement as follows:
1. 3 LDAP servers + replica for each sites.
2. Single username and password for every end user cross those 3 sites.
3. Different auto_master, auto_home and auto_local maps for three sites. So when user login to different site, the password is the same but the home directory is different (local).
So the questions are
1. Should I need to have 3 domains for LDAP?
2. If yes for question 1, then how can I keep the username password sync for three domains? If no for question 1, then what is the DIT (Directory Infrastructure Tree) or directory structure I should use?
3. How to make auto map work on LDAP as well as mount local home directory?
I really appreciate that some LDAP experta can light me up on this project.

Thanks for your information.
My current environment has 3 sites with 3 different NIS domainname: SiteA: A.com, SiteB:B.A.com, SiteC:C.A.com (A.com is our company domainname).
So everytime I add a new user account and I need to create on three NIS domains separately. Also, the password is out of sync if user change the password on one site.
I would like to migrate NIS to LDAP.
I want to have single username and password for each user on 3 sites. However, the home directory is on local NFS filer.
Say for userA, his home directory is /user/userA in passwd file/map. On location X, his home directory will mount FilerX:/vol/user/userA,
On location Y, userA's home directory will mount FilerY:/vol/user/userA.
So the mount drive is determined by auto_user map in NIS.
In other words, there will be 3 different auto_user maps in 3 different LDAP servers.
So userA login hostX in location X will mount home directory on local FilerX, and login hostY in location Y will mount home directory on local FilerY.
But the username and password will be the same on three sites.
That'd my goal.
Some LDAP expert suggest me the MMR (Multiple-Master-Replication). But I still no quite sure how to do MMR.
It would be appreciated if some LDAP guru can give me some guideline at start point.
Best wishes

Cannot mark the 'site' location of instances fixed, Bel does not match

Hello,
i have a problem using the PlanAhead Tool (v.14.5) from the ISE (v.14.5).
First of all, i have loaded an .ucf-file to define various IO for the Design. After that, i have createt a pblock for some part of the design, which also includes some of the previous mentioned IOs. I said to PlanAhead, that it should use the IO as predefined. The design compiles without error and works quite fine.
The next step for me now is to lock the pblock, which means to fix the instance, so that the compiler does not have to re-map and -place&route this part of the design. (so i try to fix the part of the netlist)
And if i try to do this, i get different errors:
- marking the whole pblock and right click --> fix instances i get the following error:
Cannot mark the 'site' location of instances fixed, Bel does not match
with the valid locations at which this inst can be placed
So i searched for this special problem and found this:
Vivado Solution which seems to be a bug in the PlanAhead software from Vivado. My question is : is in my PlanAhead ISE version the same bug ?
(copying and typing the same command in the tcl console does not work)
- Second: i tried to manuel set primitives to "fix instances" which works quite fine for most of the primitives but not for all. Some of these produce errors like:
Cannot mark the 'bel' location of instances fixed, 'Element
SLICE_X66Y112.B5LUT can not be used as a route-through for net xy
because a RAM or shift register is placed there'
Is it still a bug, can i somehow resolve this error ?
I hope you can help me out here.
Best regards.

Hello,
thanks for your answer.
I send you the two ucf files:
The first one is the "original" ucf used to define the constrains (I/O,...) and the second the one PlanAhead has generated (but with no "fixed instances") .
Thanks

Dreamweaver Template Error: Error reading file (Site Location/info) returned incomplete data

Hello!
I am working on new website we are creating for our company. I have never really had any Dreamweaver template file errors before...so this one has me really stumped! We purchased the site files from Template Monster and I have contacted their tech support, but I have not had much luck with them.
I started out by creating the Dreamweaver template folder that includes the template files that I would like to use. I started creating some pages using the template. I placed all the html pages in the main folder of the website. When I go to update the template to those pages I get the following error: "Error reading file (Site Location\Folder name\Dreamweaver template name) returned incomplete data".
I am not sure what I am doing wrong. Any help and advice would be greatly appreciated!
The site is a CSS based site with a Flash navigation menu. Since it is in the production phase, I do not yet have it placed on a server so you can take a look at it at this time (although if really needed and we cannot find an answer, I may be able to get the test site on line - if someone thinks they can help me answer this problem by viewing the site). Right now the site is housed in the same place we house all of the other sites we have produced and all of our other templates on our other websites work just fine. The main difference with this site is that we did purchase files from Template Monster to help speed us along during the construction of the page structures and also this site has a Flash Navigation Menu and a few other Flash elements (something our other sites do not really have).
I am using Abobe Dreamweaver CS5 and Windows 7
Thanks again for taking the time to help find and answer to this problem!
-J

I am curious as to why no one likes them around here.
They have spammed these forums in the past.
The code on their pages is rarely 'best-practice' code.
There are much better choices available.
My co-worker and I have to share the files, since we are editing the site together. The files are not local on our computers, but on the company's f drive that have Novell on it.
This arrangement is a recipe for disaster. The correct way to collaborate on a site with a colleague is with the following setup:
Each of you must have a LOCAL site (local to your workstation)
You would use a single remote location as a staging area, so each of you would have a site definition that specifies your own workstation for the local site, and the same network shared location as the Remote site
You will both need to enable Check In/ Check Out
You will both have to agree to PLAY BY THE RULES!
One (or both) of you will also need to have a second site defined that has the staging server as the local root folder, and would have the PRODUCTION server as the remote site. I'll explain how to use this site soon.
When you use CI/CO, your 'gold-standard files' are on the staging server. To begin working, you would connect to the staging server, and double click on a file, which will a) fetch the file from the staging server to your local site, and b) CHECK OUT the file to you. As long as you have the file checked out, it cannot be edited by your colleague. When you are done with your edit, you would CHECK IN the file (which uploads it to the staging server). It can now be edited by your colleague.
When you add templates to this scenario, things get even more complicated, although manageable. If you ever need to make a change to a template you must use the following procedure:
ALL FILES MUST BE CHECKED IN - this includes both you and your colleague.
One of you would connect with the SECOND SITE, open and edit the template, and save it propagating the changes to all "LOCAL" files (i.e., on the staging server).
Each of you would then need to return to the FIRST SITE, and again check out any files you want to work on.
When changes are done, and files are ready to publish, connect to the SECOND SITE, and upload the files from STAGING to PRODUCTION.
Does that make sense? It's important that it does.
I need to add in one more tab/link to the Flash nav bar.
Using Flash for navigation is a VERY POOR CHOICE, unless you also have redundant, text-based navigation on the pages. By using Flash to navigate, you guarantee: a) your pages will not be spiderable by search engines, b) your pages will not be navigable by iPlatforms, and c) your pages will be inaccessible to anyone browsing with screen assistive devices. Someone is making bad decisions about this site, in my opinion.

HT1491 I created my account im my iphone, and now I´m trying to buy with my ipad and the site make questions....so I want to know where do I can find this questions in the site...

I created my account im my iphone, and now I´m trying to buy with my ipad and the site make questions....so I want to know where do I can find this questions in the site...

I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

Multiple storage bin location for single material in material master

HI experts
1) we have a senario for our cliant , for which it is required to enter a 6 or 7 storage bin locations for a single part which is created in materials master without having a WAREHOUSE MANAGEMENT .
2) User can enter a quantity while doing GR in to that all locations.
3) reports based on stock avialble in all storage locations ( like MMBE)
Kaustubh

Storage bin used in IM is stored in table MARD. Key fields in table MARD are: client/plant/storage location. So you can have only one storage bin for a plant/storage location combination - even if you want to have more.
If you want more than one storage bin per storage location you have to use warehiuse management.
That's all.
Edited by: Csaba Szommer on Jul 26, 2009 12:35 PM

How to identify the bill-to-site location for a customer

Hi All,
How to identify the bill-to-site location for a customer.
I want to determine the language output of the AR invoice report based on the bill-to site address.
If the bill-to site is located in Sweden, the document should be in Swedish. If the bill-to site is located outside of Sweden, the document should be in English.
I have defined a query but not able to identify from which column I can identify the bill-site-location.
select --a_bill.org_id,party_name,account_number,a_bill.CUST_ACCT_SITE_ID
from
apps.hz_parties party
,apps.hz_party_sites party_site
,apps.hz_cust_accounts b
,apps.hz_cust_acct_sites_All a_bill,
apps.hz_locations loc,
apps.hz_cust_site_uses_all u_bill,
apps.ra_customer_trx_all trx
where party.party_id=party_site.party_id
AND a_bill.party_site_id = party_site.party_site_id
AND b.party_id = party.party_id
AND loc.location_id = party_site.location_id
AND u_bill.cust_acct_site_id = a_bill.cust_acct_site_id
AND trx.bill_to_customer_id = b.cust_account_id
AND trx.bill_to_site_use_id = u_bill.site_use_id
Thanks,
Joohi

Hi ,
Check this apps.hz_cust_site_uses_all here site_use_code will be there , you can find Bill_To Ship_to , from there you can find the site_use_id and location Id
Thanks
Shagul

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

I want to change my news source from the BBC to something from North America. How do I find a new feed and site location?

I want to change my Latest Headlines news source. How do I find a new feed and site location? I found the properties box for "Latest Headlines".

You can visit your favorite news site or search Google for one and if it has a feed then you can click to orange RSS feed icon at the right side of the location to subscribe to that feed.
CNN: http://www.cnn.com/rss/cnn_topstories.rss
Google: http://news.google.com/news?output=rss
New York Times: http://partners.userland.com/nytRss/nytHomepage.xml
Reuters: http://www.microsite.reuters.co.uk/rss/uk/topNews/
NPR: http://www.npr.org/rss/rss.php?id=1001
Yahoo News: http://rss.news.yahoo.com/rss/topstories
See also [[Live Bookmarks]]

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

Question on Storage Location reference

Dear Experts,
Right now, we are in the process of making use of Storage Location reference functionality in WM.
We understand that we can configure different WM movement types for similar IM goods movement for different storage locations within a warehouse using the Storage Location reference functionality. Also, we can determine different storage types for each storage locations as we can also use this in Storage Type Search Sequence.
Can you please help us illustrate this functionality with 1 real life scenario for each of the above functions?
We expect 1 example/practical scenario where we can use storage location ref. for WM mtype determination and storage type search
Thanks in advance.
Regards,
Shetty

Hi Shetty,
This is an Integration with IM.
One Warehouse can be madeavailable to multiple sloc & plants (even belongs to diff co ocde).
Now by entring a particular storage location refernce in storage type search startegy , you are defining sequence against a particular storage type. This is influenced by relevant IM posting.
Remember to do active SLR is access optimisation when you configure this.
Thanks,
Mahesh

Question about storage location

Hi :
Some storage location have no backflush functionality and some have,that is to say, when confirming production order via co11n, some component failed to goods issue automatically since the storage location assigning to it has no backflush functionality even we had set backflush for this material in material master data, where/how to configure it?

Hi,
Better you mark the component backflushing indicator in the Routing of the material instead of the material master.
Also maintain the storage location in the material master in MRP 2 view & work scheduling as applicable.
Note, these setting will work only for future orders.
for current orders, enter the storage location in CO02 & for missing parts in COGI.
Regards
Sandeep.

Backup or Storage Question and Default File Location

I just got a EX2 6TB and I am very new to this concept of cloud storage.I have my EX2 in RAID 1. I have two questions: 1) Can this product be used as both a storage and backup device or must you decide to do one or the other?1a) If you can use the EX2 as both for backup and storage - how do you do that? I want to use this primarily as storage and move files from my computer, which is full, to the EX2. But, if I use the EX2 as storage then I assume I need a backup system - another EX2 or separate external drive. 2) If I use the EX2 as my primary storage device how do I set my computer for all files to be saved on the EX2 without drag and drop every time for every file or all my daily work? Thanks! Mike

Hello and welcome to the WD Community.
1) Can this product be used as both a storage and backup device or must you decide to do one or the other?
1a) If you can use the EX2 as both for backup and storage - how do you do that?
Yes, you can use that as both. Just make sure to map the drive properly and it will show within your network and you will be able to copy and paste files to it manually and to access to the drive directly.
2) If I use the EX2 as my primary storage device how do I set my computer for all files to be saved on the EX2 without drag and drop every time for every file or all my daily work?
Not sure if you will be able to set the unit as a primary storage for all of your applications. Some of them will not allow you to save directly to a network unit.

VERY IMPORTANT QUESTION: Backup/Storage problems

Please help!!!
Ok. I'll try to explain this but it's kind of confusing so I'll do my best.
OK, so a few weeks ago, (maybe 2 or 3 weeks I don't remember) I had about 30 GB free on my MacBook Air's Macintosh HD storage drive. I have a Windows partition that takes up about 48GB out of my 121 total GB. The mac part of my computer has like 72 GB. Like I said, I had about 30 GB free on my mac side; I had about 9-15 GB or so of pictures from my iPhone, photo stream, and laptop. I had about 18 GB of apps, etc.
This was on November 10th I think, and the only thing that happened between then and like 1 week ago was free space went from 30>> 27GB or so.
Problem: iCloud almost full from iPod backup, iPhone almost full from videos and pictures.
Proposed solution: Move iPod and iPhone pictures to MacBook Air so I have space on iCloud, iPod, and iPhone.
Anyway, for Christmas, I got a new Seagate 1 TB backup external drive thing. I thought this was plenty of room for my tiny computer. I decided to backup my computer.
Problem: I forgot to transfer my iPod and iPhone pictures >> MacBook Air >> Backup
Proposed solution: Move photos from iPod and iPhone to MBA and go from there.
On Christmas, I decided to just synch everything. I plugged in my iPod and put my photos onto my computer and deleted them from iCloud (at this point, I was trying to free up space on my iPhone). I had about 3.2 GB on my iPod of photos and videos, and I transfered them to my iPhoto on my MacBook Air. I deleted them off of iCloud. Then, I plugged in my iPhone, and I transfered my 6.5 or so GB of videos and pictures to iPhoto.
What happened: I transfered all of my iPod and iPhone stuff to my MacBook Air. My iPhoto now has about 16-17 GB of stuff.
Problem: My backup doesn't have my pictures. The last time I backed it up was before I had all my pictures on my computer.
Proposed solution: Get all iPod pictures in one folder, get all iPhone pictures in one folder, move them to the backup.
I didn't want to backup my computer with my pictures on it, because if I deleted them from my computer and backed my computer up again, my backup would delete the pictures it had backed up. If that makes sense.
Proposed solution: Move folders to backup. Like so:
After doing all these transfers all night until 12:30, I thought I was done. Then, this morning, I remembered that I still had to delete my pictures off of my computer, because they were now on a flashdrive (forgot to mention that) and a backup.
THIS IS WHEN THE BIG PROBLEM OCCURS/IS REALIZED
OK:
1) I go to iPhoto, select all of my pictures, and I move pictures to trash
2) I go to the trash bin/can/whatever it is and I click "empty."
3) I thought this would free up the 15 or so GB on my computer.
4) I go to Finder, and I realize that iPhoto has indeed shrunk from 16.9 or so GB >> 1.27 GB.
5) I go to Finder >> Macintosh HD >> info >> says I have 24.38 GB free. I'm happy.
HOWEVER
I go to the upper left-hand corner, click the apple, hit about this mac, hit more info, hit storage... AND:
My iPhoto went from 16.something >> 1.27 now. I deleted like 15.64 or 15.65GB. This is now under backups. My Photos and movies number shrunk, but my other and backups increased dramatically
What happened/Problem: The exact amount of storage space I deleted from iPhoto is the amount for Backups (it differed by like 1 MB). Coincidence? How did this happen?! Why did this happen?
What happened/Problem II: Now there is 23.65 GB under other?!?! All I did was move pictures temporarily to my computer and then I deleted them, and I also backed up my computer using Time Machine to back it up to my... backup.
What finder thinks:
My Question: WHAT THE HECK HAPPENED AND HOW DO I FIX IT. I thought this would free up space on my iPod, iPhone, and computer, but it took away free space on my computer. I've read online and I can't find a solution or answer. Finder and storage say completely different things. I don't know how much space I really have, and why they differ.
What is this and what do I do to remove the other/backup space? I threw away the pictures and deleted the iPhoto pictures, but it thinks they are still there? I've tried searching finder, but I can't find out where all my space is vanishing to.
Thank you so much for reading and please help! It would be VERY MUCH APPRECIATED.

Personally, I say you forget about the data allocation feature of "About this Mac." I swear, someone in Cupertino designed that feature to drive up support calls more than provide insightful information on your storage allocation.
You are correct that the "backup" component is the local snapshots of Time Machine and that flagged as allocated space frees up in the event that you need the space. In Apple's defense that functionality of Lion & Mt. Lion is pretty neat. Even though it just gives people another excuse to be lazy about not keeping a good and proper external backup solution.
Notice my Backups allocation, it's Zero KB. It's always Zero KB. There's a terminal command to stop OS X from creating the local snapshots, it'll require you to authenticate in terminal to process the command.
The command - sudo tmutil disablelocal
In the event you change your mind and want to re-enable it, the command for that is as follows -
sudo tmutil enablelocal (you'll be prompted for the admin password again)
For what it's worth, there's no harm in disabling this functionality. It's just extremely important that you maintain current backups of your data at regular intervals should you decide to disable this functionality... you know like you had to do with every other version of OS X (pre-Lion).
Regarding the "other" category, here's a pretty good write up.
http://pondini.org/OSX/LionStorage.html
Personally the accuracy of the reporting categories are a bit wacky. Even more frustrating is that you can't dive into what exactly is considered "other" or see it color categorized in Finder. Perhaps that'll be a feature of OS X 10.9 - Ocelot*
*I have no idea if Apple will even release an OS X 10.9 or what it'll be called, it was a joke. You can call off the forum police.
If you're looking for an accurate representation of what's on the drive, where it's located in the various folder directories and exactly how much space it's using then a program like:
- Daisy Disk
- OmniDiskSweeper
- Disk Inventory X
- WhatSize?
All will be much, much better for those purposes. I used ODS for years and love the product, I just recently started using Daisy Disk after a recommendation from someone on these message boards. All of them are "free" but many of them require you to pay to enable features. But for the purposes of inventory, categorization and displaying of your data that functionality is free.

Windows Azure Storage Account Location change

Hi Experts,
I have deployed my Web site on Windows azure. I have created Windows Azure Storage Account. By mistakely i have set the location wrong. How can we change the location of Windows storage account?
Thanks!

Hello CRM Inn,
I am sorry to know that you have chosen an incorrect location and would like to change the location for your storage account. Unfortunately, there is no option available to change the storage location for an existing storage account.
Your only option would be to create a new storage account, migrate data to the new storage account and delete the existing one. You can refer to this article that will give you information on migrating data from one account to another:
http://blogs.msdn.com/b/windowsazurestorage/archive/2012/06/12/introducing-asynchronous-cross-account-copy-blob.aspx
I also suggest that you create affinity groups. By creating affinity groups you can be sure that all your related services are under the same data center. You can refer to this article to learn about Affinity groups:
http://msdn.microsoft.com/en-us/library/azure/jj156209.aspx
Syed irfan Hussain

Question on Storage, Site Location; UB

Similar Messages

Maybe you are looking for