Question On Sun Grid Engine

Hi,
May i know how can i submit a job to the the sun grid engine for processing?

They have a grid engine? Why does nobody tell me these things?

Similar Messages

Sun Grid Engine's qacct command fails in epilog file

Hi,
I have installed SGE on my cluster and i am able to submit the jobs . For accounting purpose i want to get the output of 'qacct -j $job_id' in epilog file. But in epilog qacct exits with "Job Id not found error". How to achieve this? Or is there any way to get the job details like 'start time,end time,total run time' etc. in epilog file?
Please help.
Edited by: dmane on Aug 26, 2010 2:06 AM

This forum is about Sun Studio program development tools. Sun Studio is program development suite for creating and analyzing programs written in C, C++, and Fortran. Since your question is about Sun Grid Engine, a product unrelated to Sun Studio, you are unlikely to find answers here.
Normally I direct people to the Open Solaris forums, but SGE is not part of Solaris; it is a separate product.
A good place to start is the main product page:
[http://www.oracle.com/us/products/tools/oracle-grid-engine-075549.html]
Also try [http://blogs.sun.com] Search for "sun grid engine" to find bloggers who specialize in SGE.
If you Google "sun grid engine" you will find other promising links.

Setting up a grid using SGE(sun Grid engine)

Hi everyone,
We are trying to set up a grid in our university.We are taking the help of SGE(sun grid engine).We have successfully installed the master host. But we are encountering a problem when trying to install
the execution host.
When we type #qconf -sh
the following output is occuring
error: commlib error: can't connect to service (No route to host)
ERROR: unable to contact qmaster using port 6444 on host
"sun.localdomain"
We have added the execution host's name to the submit list on the master host.We've also started the sge_master daemon process on the master host. .
Both the systems are pinging correctly.
We have assigned sge_qmaster the port number 6444 in /etc/services
file on both the systems(master and execution host). The name of
the master being sun.localdomain and the name of the execution host is
sunq.localdomain.
Please provide a solution to this problem,so that i can complete the installation of execution host.

ok, i have benn faced this kind problem.
i show you some info, maybe can help you out.
firstly, you need to change some setup files else. like hosts; hosts.equiv; profile; rhosts; and services.
after then, you need to add execute host name to the administrative host list. "./qconf -ah".
and then restart you server head and nodes ( for make sure something effect).
the userful information, you can found in http://www.sun.com/software/gridware/

Queries with Sun Grid Engine

Hi,
Has anyone worked with the Sun Grid Engine (SGE)?
I had some queries regarding SGE
1. Does SGE support some kind of Autoscaling?
I know that there are commands to add Nodes to Grid dynamically, but does this require the Grid to restart after adding the node?
2. how do we interact with the Queue? Is it possible using Galaxy API? or using SGE API?

arc_g wrote:
2. how do we interact with the Queue? Is it possible using Galaxy API? or using SGE API?There is one utility in Sun Studio tools, that interacts with SGE. It is "dmake":
http://developers.sun.com/sunstudio/documentation/ss12u1/mr/READMEs/dmake.html
It can build targets in "serial", "parallel", "distributed" and "grid" (SGE) modes.
It is using SGE API to submit tasks to the SGE.
Thanks.
Nik

Sun grid engine interface with 10g grid services

Hi,
I am a Graduate student in Comp Science. for my parallel class I am looking at interfacing sun Grid engine with Oracle 10g services.But I could not find ant API in oracle for me to use globus or any other oracle native API to call the job scheduling ( or even job submitting) functions in 10g. could any one please enligten me on this.I saw a marketing paper on Oracle globus development kit.But could not find any technical documentation on that regard.
thanks,
saji

Hi Sajindra,
Check out the Unified scheduler feature of Oracle Database 10g. Unified scheduler allows you to submit jobs that can be both database jobs or non-database jobs (i.e. executed outside the database).
cheers,
Brajesh.

Rendering much faster with Sun Grid Engine ?

Is it possible to get Sun Grid Engine to distribute the rendering of Final Cut Pro?
http://en.wikipedia.org/wiki/Oracle_Grid_Engine
Note: Sun Grid Engine is still free

No.

Sun grid engine

Hi i am very new to sun gride.
Please share documents to learn sun grid specially for admin usage.and workflow.
Thanks in advance

Hi Sajindra,
Check out the Unified scheduler feature of Oracle Database 10g. Unified scheduler allows you to submit jobs that can be both database jobs or non-database jobs (i.e. executed outside the database).
cheers,
Brajesh.

Anyony has dmake and Sun Grid Engine experience ?

Here is my another try to ask for the sharing of using dmake with SGE experience.
Did anyone successfully using dmake+SGE to see compilation performance gain ?
My orginal post at
http://www.opensolaris.org/jive/thread.jspa?messageID=8298&#8298
Thanks for your time and sharing
tj

We (development team) have created performance tests to compare
build performance in parallel, distributed and grid modes. Unfortunately
our grid is very small - it consists of 1 system, and in this case dmake
works twice faster in distributed mode, than in grid mode. But there is
no limitation in our implementation of grid mode in dmake, so if a build
has enough independent targets, and there is a large grid system - it will
definitely win.
Thanks,
Nikolay Molchanov

[Solved] Font problem when trying to start qmon (sun grid engine)

When I tried to start the qmon (queue monitor program), the error message show up as below:
[root@sge01 ~]# qmon
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-bold-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--20-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--12-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--24-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-bold-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--12-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--10-*-*-*-p-*-*-*" to type FontStruct
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 514
Current serial number in output stream: 525
[root@sge01 ~]#
I have all the fonts from the official depository installed (verified by the command # pacman -Ssq font ). I use LXDE and the system has been updated.
Is there anything I can do to run this program?
Last edited by teetee1 (2013-08-28 04:24:40)

Thanks for the link. I was able to solve the font errors quickly, which is great!
Unfortunately some other errors remain:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 478
Current serial number in output stream: 489
I've tried to follow instructions from the links below:
http://ubuntuforums.org/showthread.php?t=1778584
http://www.edaboard.com/thread139363.html
But realized I already have the xorg- 100dpi and 75dpi fonts by checking with the pacman command: pacman -Ssq 100dpi (and 75dpi).
Any help is greatly appreciated.

Sun BPEL engine sets wrong Content-Type on calling an external web service

I have a WSDL for an external web service (which as it happens is running in Websphere locally) and have implemented it as a
partnerlink on a BPEL diagram in an SOA composite project. The binding style is Document and if you use SOAPUI to test it it
works fine. Tracing on the web service's server shows the SOAP request coming in. It has a content-type of text/xml, as expected. If I do a JUnit test from NetBeans based on this WSDL alone it also works - same result. BUT if I do
a full test and call my BPEL process the invocation of this service from BPEL fails.
On the Test result you see
BPCOR-6135:A fault was not handled in the process scope; Fault Name is http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault;
(This happens because I did not handle the fault in the BPEL.)
On the trace I see it now has Content-type of application/xop+xml. Why would the Sun BPEL engine change this? I just
accepted the usual defaults when I created the PartnerLink and the Invoke. Anyway, the format of the request doesn't match what the WS server expects, so it fails.
As far as I'm aware I'm just using SOAP1.1. This is NetBeans 6.5 with Glassfish 2.1. I tried with NetBeans 6.7 and it got worse, not better. I would certainly appreciate any advice?
Thanks

Perhaps when the BPEL file based process calls the WSDL file to execute,their message communication is not correct.
the head part in the WSDL file should be manually set to "text/xml", or the IDE or Server will use the default value;
for example as follow:
SOAPUI tool would use the default value "text/xml" to request.(depends the tool support).
NetBeans tool would use the default value "text/xml" to request.
when you do a full test and you do not set the head "context-type" value ,the WSDL file use the server's default head
value"application/xop-xml" so that return the contents under the control of the server's default value.
I hope these will be useful for you.

When Install N1 grid engine 6 as execution host

when I try to install the n1 grid engine6 as the execution host this messege appear
Unsupported local hostname
The current hostname is resolved as follows:
Hostname: linux.site
Aliases: linux
Host Address(es): 127.0.0.2
It is not supported for a Grid Engine installation that the local hostname
contains the hostname "localhost" and/or the IP address "127.0.x.x" of the
loopback interface.
The "localhost" hostname should be reserved for the loopback interface
("127.0.0.1") and the real hostname should be assigned to one of the
physical or logical network interfaces of this machine.
Installation failed.
how can I solve this problem ??
please I need the solving as fast as you can

So before i uninstall, may i know if by uninstalling and reinstalling, i will loose my library?
Uninstalling and reinstalling iTunes shouldn't touch your content or playlists.
That being said, It's still always a good idea to maintain a current backup in case of disasters (of any sort).
i saw your other post on a similar issue where you suggested using a different browser to download the setup. I shall try that meanwhile..
I think you should be okay without having to do that ... that's more for when the iTunes installer doesn't download at all, or gives a "not a valid win32 application" or "invalid signature" message. We seem to be getting beyond that point with your one.

Question on Sun X series [x86/AMD64] Server hardware robustness

We have in the past used Sun SPARC based servers, ranging from E420R to E4500.
When a CPU or Memory module has failed on these, the system notes it and continues running until we can get a replacement and bring the system down gracefully during a maintenance window.
I know that x86 wasn't really designed for that kind of robustness. So, my question is, on the new AMD/Intel based servers, specifically the X4100M2, X4200M2 and the new X4450, what will they do if a CPU or RAM chip fails completely? Especially on the AMD servers, since the memory controller is built into the CPU.
Will they lock up like most x86 boxes, or has Sun managed to design a robust x86 system?
Thanks!

Page-wide writing engine assembly
HP 970 and HP 971 Ink Cartridges Ink Placement
Back Panel View Paper Tray and Adjustable Guides
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Several question s about runtime Engine, application builder and labview player

I am a little confused by all the options to distribute a program.
Please help bij answering (one of) the following questions:
1. Does an application built with the application builder always need the LV runtime engine? The LV runtime engine is 33 Mb to download!
2. Is there anyway to make a 'normal' executable that runs on a windows machine, without any supporting installed software?
3. What is the advantage of the labview player above the runtime Engine?
All questions refer to the latest software versions of NI software
Thanks in advance,
Regards,
Ferry

ferry1979 wrote:
1. Does an application built with the application builder always need the LV runtime engine? The LV runtime engine is 33 Mb to download!
Yes, the runtime engine contains all the stuff that is common to all LabVIEW applications. This is not any different than e.g. the Visual basic runtime (VBrun...) or dforrt.dll for Fortran.
If you built the application, you can strip it a little bit by including the runtime with the installer and leaving out unneeded modules (see image from the 7.1 builder).
The advantage of a seperate runtime engine is that applications are very small. The runtime needs to be installed only once. On any broadband connection, 33MB is peanuts. I distribute everything without runtine, but tell people to download and install the runtime directly from NI.
(In LabVIEW 4, no runtime was needed, with the disadvantage that even the simplest program was multiple megabytes. Not an efficient solution).
(Maybe in a few years LabVIEW will be so prevalent that the LabVIEW runtime will be part of a standard OS install ;
2. Is there anyway to make a 'normal' executable that runs on a windows machine, without any supporting installed software?
No. See above.
3. What is the advantage of the labview player above the runtime Engine?
The two are quite different. The labview player is more a simple educational tool, because it lets users inspect the diagram. It is not designed for any serious application deployment.
Message Edited by altenbach on 08-21-2005 10:05 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
runtime.png ‏24 KB

Some general questions about Sun Java Communications Suite

Hello Everybody,
We are a small group of individuals (2 Java developers and 1 Linux expert and Web Application developer), located in Germany.
We are fully new to �Solaris� and Sun Java Communications Suite and know, that it�s a highly professional software system for large scale deployment. However we plan to install (64 Bit version) and manage it in a small network environment, consisting of a Server (4 GB RAM, RAID 5, AMD Dual CPU) based on Solaris 10 (X86) and *20* clients based on Win XP, Solaris and Linux.
It�s a network of a non-profit organization, providing social services to local society.
At clients we will use the Communications Express and the needed services are: Calander, Mail and Address book. (no need of Outlook Connector, Instant Messaging, Document Management, etc.)
Our long-term aim is - after learning of professional architecting, deployment and management of Communications Suite - to provide integration and development services to organizations (schools and small / medium sized Business) and public in cooperation with ISP or infrastructure-providers like Sun Microsystems.
Now, our main questions are:
*1.-* Is the Server phy. recourse enough to deliver the mentioned services of Communication Suite to 20 clients without problems?
*2.-* Isn�t Communications Suite oversized for such small network mentioned above or better, if we use another collaboration software system like Opengroupeware (http://opengroupware.org/) ? Opengroupeware is developed using non-java lang and therefore doesn�t match our strategy.
*3.-* Does the Communications Suite download-pack includes all necessary components of Sun Java ES (Directory Server, Access Manager, etc.) or these components are to be downloaded separately?
*4.-* What is the difference between the Sun Java System Messaging Server and the Sun Java System Message Queue?
We appropriate very much your answers and any further useful information regarding our project.
Thanks
Asghar

1> I believe your hardware can support 20 users (you might need to tune the Web Server heap size) - I had a Sparc 2x450mhz w/ 2GB of ram supporting 50+ users quite comfortably - with roughly half using POP and the other half IMAP/webmail. Ideally though, for best performance you would want to break up the main servers (LDAP, WEB, and MS) between hosts) - probably not necessary for 20 users. Having all on one machine simplifies things too (but also makes it a single-point-of-failure). Your disk obviously is important, the faster the better - that it's redundant is also nice - larger deployments might use much fancier storage systems to provide speed and redundancy, and use an the App Server instead of the Web Server as a container for Comms Express.
2> I don't think it's "oversized" - might you mean overkill? In this case I don't think overkill is a bad thing. Why not have very capable software, even if you don't really need it -is how I see things.
3> I believe you get all you need in the download. Though I've never tried the 64bit version (which I am guessing is only really necessary for larger deployments where you want to obtain maximized performance for heavier loads). I recommend following the single host evaluation document to get the hang of the install.
4> I'm not sure - though the Messaging install I believe requires the MQueue stuff, I think it's sort of an API for messaging, also available separately, but used by JES Messaging system?
Good Luck,
s7

Some question for Sun Java System

Dear all:
I use Sun Java System We Server 7.0 for my project.
But I have some question on SJSWS 7.0
My server runtime information
1. OS is RedHat Enterprise 3
2. memory: 2G
3. SJSWS version: 7.0 preview 3
My questions
Q1. The speed that download image is slower than the speed that run JSP page . The image's size to smaller than 5 KB. Is it possible to speed up download image
Q2. My machine has 2GB memory, The system use swap area always. I think it isn't enough of SJSWS 7.0. How much memory size that SJSWS 7.0?
Many thank for everybody

first off, please try the Update 1 release in stead of technology preview releases: http://www.sun.com/download/products.xml?id=467713d6
Q1> So I want to ask it is possible to display image and text at the same time like use Tomcat ?
there is nothing in the server end (whether it's Tomcat or any other web server) that affects how the content is displayed on the browser.
Q2>I detect The ram was used over 800M~1G by SJSWS7. My website has 80~150 user in workinghour
Are you seeing Web Server process measuring so much memory?
Q3> Is it possible that the admin server use SJSWS7U1 and some or all of node use SJSWS preview 3, because the server is running on line, I can't stop them for update server
No - you want to switch to U1 anyway, since it's a released version (and is absolutely FREE for production use).

Question On Sun Grid Engine

Similar Messages

Maybe you are looking for