Question on the drill down report in BI Answers

In BI Answers, I can drill down a summary report based on the hierarchy defined in the Repository. For example, I have a hierarchy of 5 levels, level 1 to level 5. Now column level 1, level 2, and level 3 are shown and clickable. Click on level 1, level 4 column and data is shown. But level 4 column is shown after level 1 instead of after level 3. Is it possible that when click on level 1 , level 4 column will appear after level 3?

Don't post the same question twice...
Is rollup possible in BI Anwsers report?

Similar Messages

Agregated value in original report in not same as the drill down report

Hello experts,
I have a issue with the drill down reports.
Agregated value in the main report is not equal to the agregarated value in the drill down report.
In my report I have a sales for jan 2011,feb 2011 so on
For jan 2011 it is some thing $56000
when I click on this amount it giving the detail level for each region sales and at the end it is giving the total sales for jan 2011 as $98000
My question is why there such difference in the total amount when we are drilling down?
Please help me in this regard. I am new to obiee.

hello
do you have any filters on this report that would related to measures?
if so, remove these filters and see if you still get different values;
rgds

Problem in accessing the drill down report via RRI

Hi guru's,
          ThanX in advance for all the stuff you are providing.
I have a problem with the drill down report.I have two reports Q1 and Q2 where Iam navigating to Q2 from Q1 via RRI.But when I try to drill down to the Report Q2 It gets into an unending state of query execution(to say shortly it gets struck).
This report was working fine earlier.But very Recently I encountered this problem.I started debugging the query at RSRT.For the report Q1 just goes fine but when I drill down to Q2 it gets struck.This is the part of code where the report end up in an unending state.Infact it gets struck exactly while calling the method...
"CALL METHOD g_sx_buffer-r_request->read_data"
Fetch the data, using the wait command only with the second parse
    IF g_s_session_prptys-use_wait = rs_c_false
      OR i_mode = rrx1_c_grid_get_mode-wait_fetch.
Is data available
CALL METHOD g_sx_buffer-r_request->read_data
        EXCEPTIONS
          x_message     = 8
          no_processing = 1.
      CASE sy-subrc.
        WHEN 1.
    Necessary for drill to level
     raise no_processing.
        WHEN 8.
          RAISE x_message.
Can Some one help me out to know what happens at this part of code that is causing the error.
ThanX A Lot,
Regards,
Sukumar

Its better you raise an OSS message on this problem.

[Extend DBI] specify the drill-down report for the custom report column

Hi,
I realized two custom reports by using the extend DBI tools:
1st report displays the sum of invoices amounts grouped by Operating Units.
2nd report display the details of invoices for all Operating Units
In the 1st report I specified a link on the column Operating Units to drill-down at 2nd report.
The problem is how specified the drill-down link so that the 2nd report display only the detail of invoices for the selected Operating Unit?
Thanks.

Adding the time dimenstions like Year, Quarter, Period, Week is quite possible.
Steps would be:
1. make sure your data source (Table/View has these columns). If you don't have them you can generate them by joining the date of the data table with FIII_TIME_DAY.
2. Map these new columns to appropriate Dimesnions. (Lile Enterprise Year, Enterprise Quarter etc.)
Once you have done these two your report will work for the Time Dimensions.
I dont think its possible to get the Prior Period functionality unless you use a generated datasource.
Regards,
Sudeep

Report Painter - cannot hide an element selected for the drill-down report

Dear Experts
I am using report painter to modify a report by trying to hide a row but getting the following error.
You cannot hide an element that you selected for the drill-down list
Message no. K7186
Diagnosis
You cannot hide elements that have already been selected for the drill-d
System Response
The function was canceled.
Procedure
Deselect the relevant row or column from the drill-down list.
It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
kindly please help me to solve it
thanks in advance
Suresh

Hi,
If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
I copied this standard form '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
any help?
Suresh
Edited by: rasuresh on Aug 10, 2010 12:44 PM

User can't open the drill down report in EIS

Hi Everybody,
Please help me from this problem.I am using EIS for DRILL DOWN Report generating.But few user can't able to do the report.
Please show the path how i can resolve the issue.
Regards,
999

What kind of error message (if any) are they getting when they attempt to use the drill through?

New to Application Express - Drill down report question

Good evening group. I'm new to this Application and DB but can't find quite the correct answer.
QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
Any thoughts, help would be greatly appreciated.
-Dave

Hi Dave,
>> QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
I'm not being a smart alec, but I don't see the question in this.
>> QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
For now, don't worry about the WHERE clause of the SQL query unless the column you dropped is in the WHERE clause as well. Beginning with SELECT and up until FROM in the query statement, if you see your column, remove it from there.
If you post your query and the column to be removed, we can help further.
Joel

Drill Down Report in screen painter

Hi Experts,
I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
First question is how will I have the drill down report (alv list type?) in screen painter?
Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
Thanks in advance for all teh support. Points will be rewarded.
Cheers,
Kurtt

Hai,
Go thru this Threads u ll get an idea,
Drill down report help
Re: regarding Drill Down Reporting
drill down capabilities for an alv grid display field using oops concept
Regards,
Padmam.

Drill-down Report Customizations

Hello!
First, I'm thrilled having found this resource. I really hope someone can help guide me on the 'opportunity' I have here.
I have created a Shared Analyses report. This report displays a count of Service Requests grouped by Primary and Secondary categories (type and sub-category, respectively)
The report works great. However, the individual viewing the report has the ability to click on one of the rows and drill-down. The drill-down report lists the following fields:
Type (primary category); sub-category; service request no.; service request ID; # of service requests (which, at this level, is always 1)
The question - how can I modify that secondary report to make better sense? I'd like to essentially replace the '# of service requests' column with 'subject'. When I go in to manage analyses I can get to this report by clicking the preview and then clicking on one of the drill-down links (just as the end-user would). However, making changes and saving then results in have this secondary report as the one that shows rather than the top-level report.
I do hope this makes sense. I appreciate any guidance in modifying the drill-down reports.
Eddie

Hi Weesie,
I highly recommend that you order the CRMOD reporting book my Michael Lairson. That book is a great resource for these types of questions. You can find it on Amazon. This book answers this and many, many other questions you might have about designing custom reports. http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1273756620&sr=8-1
Drilldown are managed in step 1 of the Build and Analysis window, via column properties. You can remove drilldowns (if you don't want them to show) by choosing "No Interaction" in the Value Interaction type field on the Column Format tab. You can also have them navigate to a custom designed report (which I think is your question) by choosing "Navigate" in the Value Interaction field and choosing the target under the "Add Navigation Target" capability (which shows up when you select Navigate).
Good Luck and I strongly urge you to order Michael's book,
Thom

Drill down report issues

Is there a solution for displaying fields only on the drill down report with out it displaying on the top main report.
Main report columns:
case id casename location Assignee Asigneegroup
when i click on case id drill down report appears
Drill down report columns:
Task id taskname Assignee assignee group
my question is that i dont want to see Assignee and assignee group on the main report, I just want to see those columns on drill down report. If i remove those 2 columns on the main report (drill up report), then those columns are not appearing on the drill down report as well.

i think a drillfilter will solve the problem
try to add a column and add drillfilter in this column
good luck
Amr

Delete frozen data in drill down report

hi guys,
does any one know how to delete the frozen data in a drill down report?
thanks

Hi HariKan,
Based on my understanding, you create a drilldown report, when you click the plus button to expand the subreport, some rows doesn’t have data. You want to only display those rows which contain data.
In your scenario, you should specify the query in where clause to eliminate blank data rows within the subreport. Then use this report as subreport on main report, then create a toggle button. Please refer to the steps:
1. Go to the subreport, specify the query like below:
2. Back to the drill down report, create a subreport control and use the changed report as subreport, then specify the Visibility option like below and preview the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Calendar with Drill Down Report

Hello,
Everybody.
I am new to Application Express.
Please any one tell me step by step how to make calendar with drill down report.
Waiting for valuable reply.
Thanks
Rahul

Not sure if this is what you wanted, but I have links on a calendar, and when you click them, it branches to another page with details about the event.
To do this, create a calendar region. The SQL statement should have at least 2 columns: The date of the "event", and the text to display as a link. You should also choose a primary key that you want to pass to the drill down report when the user clicks. Something like this:
select hiredate date_scheduled,
          ename display_column,
          empno
   from empIn the calendar attributes of that region, there is a place to designate which column is the date, and which should be displayed. Go down a little further and set the column link. Put the page you want to show the drilldown report on, and set any variables you need to.
Hopefully that helped. Its pretty simple once you play around with it - start simple and then once you get the hang of it, make it more complex.

Drill down reports from Before Report Trigger

Hallo,
I am using reports 6.08 and I want to run several subreports from the parameter form of a master report. However when I call srw.run_report() from the Before Report Trigger with batch=no I get the error message ... When I use batch=yes I cannot use destype=srcreen. When I use the same call from a button trigger it works fine.
How can I call a drill down report from the Before Report Trigger?
The master report should not create a report itself; only the drill down report should be visible. How can I exit the master report without raising an exception after running the drill down report?
Thanks a lot - Ulrich

Ulrich,
The only place where it is valid to call a report using srw.run_report() with a destype=Screen (or Preview) is from a button of an already run report (to provide drill down capabilities).
In your situation where you're really only using Reports as a parameter form (in the master case) I would suggest that you look to use a real Oracle Form as the master driver, and run_product calls to generate the required reports.
Hope this helps,
Danny

Drill Down Reports on Web CGI

I have a drill down report that runs with no problems on reports
runtime. When deployed on the web (we are using the Web CGI
interface) the report runs and is displayed in the browser in
Acrobat as it should. However, the button for the drill down is
not available - it shows on the screen but is not pushable.
Is there any work around for this?
Thanks
PAUL
null

Hi,
You can use the srw.set_hyperlink to create a link or the item you want to have the drill down report , in the properties in the hyperlink property specify the Link.
In web button's don't work.
Hope it helps.

Question on the drill down report in BI Answers

Similar Messages

Maybe you are looking for