Question on the management console ESSO-PR and ESSO-LM

Fiends.
I can install the administration console of the ESSO-Logon Manager and Management Console Password Reset in one server
Thanks

Fanton is correct, you can, however, the ESSO-LM console is what you will use to build the application templates. This means that you may need to install this on machines with any fat client windows applications you need to enable.

Similar Messages

I cannot access the settings tab in the management console

I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?

collado144 wrote:
I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?
Have you tried to go here and select your Gateway, then follow the trouble shooting tips. Most gateways/routers default passwords at one point were changed to the serial number for security reasons. If that does not work, you may try resetting the gateway/router to get back to the default. Never leave your gateway/router with the default passwords. If you get into the gateway/router a Verizon firmware upgrade if it is a Verizon model, may even change the default password to the serial number so it is not the standard D-Link that is used with all their gateways.
DSL help.
http://www.verizon.com/Support/Residential/Internet/highspeedinternet.htm
The DSL Gateways can be found here.
D-Link 2750B Gateway?
http://www.verizon.com/Support/Residential/Internet/HighSpeed/Networking/2750BGateway/ATLAS6561.htm
There is a wealth of online information also available here.
http://www.verizon.com/Support/Residential/Internet/fiosinternet.htm

Using the management console in less-than-ideal network topologies

I'm interested in using the JRockit management console for investigating
performance issues happening on customer sites. However, the management
console's method of communication with the server doesn't appear to be
very tolerant of tunneled connections (which would be the most
straightforward approach), on account of the management client starting
a new connection with an address and port provided by the server --
which is likely not to be an address and port which, from the client's
location, will actually reach the server.
Even if I were to start a non-tunneled connection from our VPN host
(which is less than ideal, as this system is headless), it would fail on
account of being given the server's primary address rather than its VPN
address. Setting jrockit.management.address at application server
startup isn't an acceptable solution as we may be starting the JVM
before the VPN connection has negotiated an IP, and restarting the
application server every time the VPN resets is an entirely unacceptable
approach.
If anyone could suggest a workaround, it would be appreciated.
Putting a rework of the management console's connection method on the
TODO list such that some future version of JRockit doesn't have this
issue would be a Good Thing as well -- particularly were it to occur
before IPv6 becomes widely deployed enough to make the issue moot.

I got my first MB about a year ago. Since this is your first MB, I'd suggest that you "play" with it first to get used to it.
After consulting this forum (and since my MB was after all brand new with no important files to backup), I did a "fresh" install from the installation DVD that comes with the MB (instead of deleting unwanted files). You do this by putting the DVD in your MB, restarting it and holding the C key.
I can't remember the detailed installation instructions, but they were quite simple and straightforward, and I just followed them as they appeared on the screen.
I do remember that I opted for the "erase and install" option which completely erases the destination volume and then installs a new copy of Mac OS X on the MB. There is also an option where you can select which programs you want to install (so that you can free up hard disk space).
After installing Mac OS X, you'll have to configure all of your computer settings (just follow the instructions on the screen), install iLife applications (which are provided on a DVD with a new MB) and other 3rd party applications you might be interested in (some of which can be downloaded for free from the internet).
While you won't be using Office for Mac, you may want to try Neo Office (just google for it). It's free although donations are appreciated.
Last but not least, my MB has been trouble free and my overall experience has been very good.
I hope this helps and enjoy your new MB.

How to have one centeral management console for DB and Application server?

Hi
Thank you for reading my post
I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
is it some other application that i should install ?
or it is just some more configuration?
thanks

What you are looking for is called Grid Control.
You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
You can download Grid Control from the following link:
http://www.oracle.com/technology/software/products/oem/index.html

Lab Manager console is disconnected and shows a blank grey screen

Hello,
I am trying to solve an issue in Lab Manager v4.0 (no update 1) that is perplexing me. I am simply trying to show or view an open console in Lab manager using IE6. I am prompted to install the MKS add-on (quickMksAx.dll) and I can that no problem. When I try to "show" the console view it pauses for a few seconds and then displays "The console is disconnected" wiht a bland grey background. I have spent several hours searching for a solution on google but to no avail. I have tried these documented workarounds on the VMware website but again to no avail. Any help would be much appreciated. There are several users in our company that will access Lab Manager via IE6 exclusively. I need to know what settings to change in IE to get around this problem. One important note, this only happens when I connect to Lab Manager 4.0. Works fine on Lab Manager v3.
I attached a jpg showing the error screen.
Thank you in advance!

I'm running LabManager 4.04 with IE9 and Firefox 10.x. The Black Windows Screen is sometimes there sometimes not.
The Browsers more or less doenst react when connecting and then the Console Window through mks-plugin is there and sometimes
the black window appears.
I first thought some problems with a local firewall and checked the logfile but none of the ports and ip destinations show up as blocked.
Then i checked the system with the process explorer. The mks plugin exe doesnt seem to start when the black window appears.
When the Console is visible the vmware plugin starts up and is availabe in the process monitor.
The Plugin writes logfiles in the logged in users Appdata\Local\vmware....\vmware-%username%-xxxx.txt but first when it could be started.
I havent checked by now the following possible reasons
- Identical Systemtime
- DNS Resolution of ESX-Hosts
- Webconsole Interface vCenter
But why does it work sometimes and sometimes not the possible reasons doesnt fit to Identical Systemetime, DNS-Resolution and Webconsole..
If these reseans are responsible it shouldnt work at all and not the sometimes it does and sometimes it dont
Chers
Michael

Connecting to the Database using the management console

Hi all,
When I login into the web based management console , I am able to see my system ( and also register other systems 0
However, when I click on the 'Database' - I am required to supply a "User ID" and "Password"
I tried everything : my SAPGUI user/pass , a database user/pass , the <SID>adm unix user/pass - nothing works.
What exactly goes there ?
Appreciate your help
below is a print screen of the user prompt I am getting when clicking the database component on the left

Hi
thanks for your reply
So , if I understand you correctly , this userid/password is the unix account <sid>adm credentials.
Well, if I understand the articel correctly , you need to either have write permissions for the sapstartsrv executable ( which my admin account currently do not have ) OR have the service/admin_users parameter set with the admin account
So I added the service/admin_users = <my admin account> and bounce
Did not help.
I also have :
-rwsr-x---
1 root
sapsys
707299 Jul 1 12:34 sapuxuserchk
Anything else you think I am missing ?

Questions about the future directions of InfoPath and Microsoft Access

Because I have been confused about the future directions of InfoPath and Access, I wrote a short blog post, which I have pasted below. My question is, can Microsoft provide some more guidance on Access vs InfoPath? If Access is indeed the
the future direction, can you please provide some pointers to resources that can help us transition.
A Short Review of MS Access, SharePoint ,InfoPath (2013)
After the November 2012 SharePoint Conference in Las Vegas (#spc12) there were a number of blog posts and people saying that Access 2013 was great and would be replacing InfoPath.
Marc Anderson and
Ruven
Gotz have short posts summarizing #SPC12 and touch on the subject of InfoPath and Access. I also spoke with several individuals shortly after #SPC12 and they were excited about Access 2013.
Since I rely heavily on InfoPath for much of what I do, I wanted to kick the tires and see what everyone was talking about. First, a few notes about SharePoint 2013 and Office 2013.
Microsoft should rename Access: If you have tried to
bing the word Access, then you know that the search results are overwhelming, because the word "access" is used for so many other purposes.
Use the RTM version of Office 2013! I was performing my investigations by leveraging the Office 365 Beta and the Office Applications that come with it. Not much was working! After I uninstalled the Beta
version of Office 2013 and Installed the RTM version everything seemed to work.
Windows 7 and IE 9.0: The drag & drop that is being touted as
"manna from heaven" seems to work well with Firefox, Safari, Chrome, and IE 10, but it does
not work with IE 9!
Non Microsoft browsers are still second class citizens (except for the drag & drop): Microsoft has finally done away with the Active X's for datasheet view (that is brilliant!) One can now see the newly
minted datasheet view in many browsers. But I still find that one needs to be in IE to do a number of key manual opeartions. For example pasting numerous rows of data from a spreadsheet into the new sheet view works only in IE.
Access 2013
Microsoft Access is touted as a non developer tool. I know a number of people who are on the business side and love Access. These people will like the renewed energy that Microsoft has applied to Access. One should note that conceptually
this functionality existed in SharePoint 2010. Here is what I see that is new:
+The new version works better:Although I haven't tested it fully, it seems that many more features that work on the Desktop version of Access, now work in the published Web Application which is hosted by SharePoint 2013.
+The new version has fairly robust browser based forms: End users can now fill in data using forms that are rendered in the browser.
+The published version that resides in SharePoint now uses its own SQL server tables. So the engine appears to be SQL Server, not a modified version of Access built for a server. This stands to be quite robust, but I imagine
that some quirks will surface due to new model.
The limitations are:
- Access is pretty much its own application and does not integrate with SharePoint building blocks. For example, an Access table is not easy to integrate with a SharePoint workflow. Further, although Access forms now are visible
in a browser, they are not nearly as rich as InfoPath forms. InfoPath forms cannot easily integrate with the Access tables. In order to integrate SharePoint features and Access, one needs to tie SharePoint list(s) to Access as data sources.
This overcomplicates the model and one may very well run into synchronization issues.
In short, although I believe there will be some people who will be happy with newly minted Access, I do not think that Access will be able to replace InfoPath and Workflow technologies. I do agree that Microsoft does not seem to have put much energy into
InfoPath. If they leave a vacuum in this space, then others may very well take over, for instance Nintex Forms.

Although I agree with the comments made by Ruven and Marc after the conference please note that those blog posts are their own personal opinions and that they don't work for Microsoft. A lot of people have asked Microsoft to clarify the future of InfoPath
and the response up until now has been a deafening silence. In my opinion speculations about Access replacing InfoPath are premature.
I should also point out that most of your comments about Access 2013 above are actually about Access Services in SharePoint Server 2013. Access Services are NOT Access they are a shared service offering in SharePoint that convert and publish Access
databases and forms. As you point out once an Access database is published through Access services it is converted to SQL Server and no longer resides in Access. Of course I don't work for Microsoft either so these are all just my personal opinion.
Having said that I doubt you will get the confirmation/response that you are hoping for from any official Microsoft channel.
Paul Stork SharePoint Server
MVP Principal Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Question to the experts? about saving and retrieving numbers

Question
is there a java method to store a number in the memory and recall it
like M+ and M- in the Microsoft Calculator?
when the M+ button is clicked it store the numbers
When M- button is clicked it recalls the number
lets say ive used
i.e using the String s method which is straight forward
actionPerformed Event e blaah blah blah
//add your handling code here
   String s;
        intA;
        double PhoneNumber;
        s=txtA.getText();
       A=Integer.parseInt(s);
       PhoneNumber= (double)Math.round(A);
       s=String.valueOf(PhoneNumber);
      txtRexhaul.setText(s);now when the M+ button is clicked it stores both the values in "txtA" and "PhoneNumber"
and when the M- button is clicked it recalls the stored numbers and sets it back
using the .setText("") method in "txtA" and "PhoneNumber"
is this possible ?
Solutions are appreciated thanks again
Edited by: AK-Emm on Sep 27, 2008 2:30 PM

oh ok
lets use stack then ilike node
if it will work just like storing numbers on a calculator M+ and M- functions this is a stack method
class Node {
   String item;
   Node next;
Node first = new Node();
Node second = new Node();
first.item = "1222441"; // Clients phone number lets say mine Rexhaul Cartier
second.item = "33322211"; // Clients phone number lets say yours
Node old first=first;
first=first.next; //when the M- button is clickedi get stuck after this i need to simplify this thats where your expertise comes in,
example of a calculator lets say a standard has a Store Button M+ and a recall Button M-
with the String S method as mentioned earlier
when the M+ button is clicked it stores both Textfield "A" and TextField "RexhaulCartier"
when the M- button is clicked it recalls the stored number just like setText(); to the selected textFields
let me simplify this i.e ?---> A // what goes into A
A=1// you type the value
1(store)---> A // stores 1 in variable A when M+ button is clicked
RCL A// recall what was stored in variable A by clicking M- button
A= 1
you get the picture?
i.e if you use Microsoft OS i.e Vista Xp 2000 etc run the calculator in accessories youll see what i mean
when you want to store the answer you press the M+ button when you want to recall it you press M- it displays the stored answer thanks for your time to help me out i really appreciate your help p....
Edited by: AK-Emm on Sep 27, 2008 3:29 PM

Application does not show up in the manager console -- Java Web Start

Hi...
I have downloaded the jnlp file so many times but still the aplcation is not displayed in the JWS manager console.
This my jnlp file : -
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://2m6:8100/jws/" href="ChatApplication.jnlp">
<information>
<title>Chat Trial</title>
<vendor>SAI</vendor>
<description>Just an example</description>
<icon href="images/icon.gif"/>
</information>
<security>
<all-permissions />
</security>
<resources>
<j2se version="1.3"/>
<jar href="chatapplication.jar"/>
</resources>
<application-desc main-class="ChatImpl"/>
</jnlp>
Can anyone give me any suggestions???? They are welcome.
-Sid

Actually this problem usually occurs as a result of the way you have configured your href line for the jnlp file. If you are still having some problems try putting in:
href="http://2m6:8100/jws/ChatApplication.jnlp"
See if that helps it at all. It's possible that it's not using the relative reference combined with the codebase URL given.

Question about the relationship between a project and Mobile Me album

Hello esteemed members of the Aperture community
I have a puzzling issue. I have published a project on MobileMe. My project is arranged somewhat chronologically, and I want MobileMe to follow this. However, the MobileMe album in Aperture does not synchronize with the project, and subsequently, the gallery on MobileMe does neither. How do I tell the MobileMe album in Aperture to synchronize itself with my project, and update changes as I edit the project, or am I just totally confused...always a possibility?
Thanks in advance

You sort of answered your own question in the title: Your Mobile Me gallery is an album. By design, changing the sort order of a project does not affect the sort order of related albums and vice versa. You'll have to make those changes in the album to have them reflected in the gallery.
I know of no way to have an album synchronize with a project. (Note: if you make adjustments to images or delete images from a project, those changes will be reflected in the album, but the sort order will not.)
DLS

Question about the new IMac display 2012 and pollution

The IMac late 2010 there is the problem that the fan behind the screen and glass environment pollution such as smoke, candle soot, heating dirt etc fans were absorbed and resulted in contamination streaks on the inside of the glass cover.
A new display technology is applied to the new IMac in 2012 and thus achieved a higher density of the display. Can Apple confirm that with this new display, the old dirt from the inside of the glass are excluded and will no longer occur?
Thank you for answer

Good question, but you're not talking to Apple here, just users like yourself, so I doubt you'll get a definitive answer.

Quick questions on the topic of Web Services and EJB POJOs

I have been reading about Web Services and the data types that are aloud as operation parameters and return types. I was wondering what the standard practice for return types; is it to use the Entity classes straight and customize the WSDL instead of letting the EE container do it (avoid cyclic problems in the schema that can occur when using entity 1-to-many and many-to-1 mappings) or; is it to off load the data into a DTO/VO/Bean and let the EE container take care of all the schema mapping for the WSDL? I look at the EE tutorial and bought a EE book both use very basic examples that do not include connecting to a database or using EJB3 for the data store.
Thanks for any information

bump

Questions on the comparison between Oracle Forms and Oracle APEX

Hi All,
The link below presents information about Oracle Application Express for Oracle Forms Developers, the table at the end of the page shows a comparison between Oracle Forms and Oracle APEX, all the points of comparisons are clear for me except 3 points which are:
•Locking, what is meant by locking models?
•Database Connections, what is meant by Synchronous/Asynchronous connections in Oracle Forms and Oracle Apex?
•Architecture, what is meant by 2tier and 3 tier connections?
http://www.oracle.com/technology/products/database/application_express/html/apex_for_forms.html
What I need is a simple explanation for these points without deep details.
Thanks

Hi
That is how I understand that document:
Locking: Forms, by default, locks a row as soon as the user starts modifying the data. That is pessimistic locking. Apex, on other hand (and optionally forms also) do not lock the record, but before applying any changes checks if the data has changed since the user queried it (what for some reason is called optimistic "locking")
DB connections: I am not sure why they used the terms synchronous/asynchronous, but the difference is that Forms, by default, keeps an permanent DB connection while the user is using the application, while Apex gets a connection from a connection pool every time a page is requested/submitted.
Architecture: Forms (in its web version at least) has 3 tiers: the browser, the appserver where the forms service runs and the database. As Apex runs inside the database, there are only 2 tiers: the browser and the database (though you still may need an http server in between which serves static content, I don't think it is considered part of the application in this context). If you are talking about client/server forms, then there are only 2 tiers.
I hope this helps!
Luis

Quick Question About the GS70 Stealth Pro-099 and Kensington Locks

Does the GS70 Stealth Pro-099 work with Kensington Locks (Does it have the Security Slot)?

Quote from: rhradacut on 16-December-14, 09:57:49
It should be on the right side along with the card reader slot and USB ports, between the power connector and ventilation slots.
Thanks! I just wanted to be sure before purchasing one of the locks.

GP Preference Items Throwing "Could not find a part of the path" Error in GP Management Console

Hello,
For background, I recovered two Server 2008 R2 Domain Controllers in the same domain from a JRNL_WRAP_ERROR
using the BurFlags registry key as outlined in KB290762. The non-authoritative restore seemed to resolve NtFrs/replication challenges, as now the FRS and System logs are free from any major errors and "repadmin /showreps" output looks clean.
As part of the cleanup process I am going through and checking all the policy objects. Policy objects that leverage group policy preferences are
throwing an error when the settings are viewed in the management console:
The following errors were encountered:
An unknown error occurred while data was gathered for this extension. Details: Could not find a part of the path 'C:\Users\administrator.YOURDOMAIN\AppData\Local\Temp\2\ny0ho1ht.tmp'.
This occurs for existing Group Policy Preference objects and those that are newly created. It is important note if I go to edit the policy in question
the preference settings are available, it is viewing them in the management console that seems to be the issue. What concerns me here is that the file it is looking for is stored in the local temp directory and not the SYSVOL directory. With replication issues
behind me I am not sure how to address this last piece of the puzzle.
Any assistance in getting this squared away you be appreciated.
Thanks!
Jordan

DCDIAG /C outputs the following error in relation to the VerifyEnterpriseRefrences test:
Starting test: VerifyEnterpriseReferences
The following problems were found while verifying various important DN
references. Note, that these problems can be reported because of
latency in replication. So follow up to resolve the following
problems, only if the same problem is reported on all DCs for a given
domain or if the problem persists after replication has had
reasonable time to replicate changes.
[1] Problem: Missing Expected Value
Base Object:
CN=DC04,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[2] Problem: Missing Expected Value
Base Object:
CN=DC03,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
LDAP Error 0x20 (32) - No Such Object.
I am evaluating the suggested KB now but am not sure it is related to the issue at hand but posted it for completeness.
All other tests pass.

Question on the management console ESSO-PR and ESSO-LM

Similar Messages

Maybe you are looking for