Question on updating my BlackBery Curve 3520???

Is there a place i could just give someone my phone and they can update it for me.????? Im from canada.

Hello,
You can
Try one of the different methods listed here for reloading your BlackBerry Device Software: http://bbry.lv/9rlgtK
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

I want to create or add an email address- blackberry curve 3520

Hi guys,
i am very new to nthe world of moden phones and emailing on them! but i am getting very fustrated that i have followed the instructions to add email to my phone and it does not provide me with the option needed! i have a blackberry curve 3520
on the instructions it says to
I
On the email setup screen, select one of the following options:
I want to create or add an email address
or
I want to use a work email account with a BlackBerry Enterprise Server
i only get 'I want to use a work email account with a BlackBerry Enterprise Server:' option appear on my phone!
Has anyone else had this problem or know how to solve it?
Many thanks Helen

Resend your service books.
On OS 5.0 go to:
Options -> Advanced Options -> Host Routing Table -> Press your Menu Key -> Choose "Register Now"
It should say "Registration Message sent" and you should recieve a message from BlackBerry confirming that the device is registered on the BlackBerry network.
If you do not recieve a response, or get any other message when you choose Register Now, you may have a network provisioning issue and you need to call your wireless provider for them to perform a BIS check.
A.

Unable to update device software from 4.6 to 5.0 (No updates available) (BB Curve 8900)

Hello guys.
I've been trying for the past few days to update my BB Curve 8900's Device Software but whenever I click update, it always says "There are no BlackBerry Device Software updates available."
Please help.
Thank you!

Hey TheLittleBee,
Welcome to the BlackBerry Support Community Forums.
BlackBerry Handheld software availability is determined by your network service provider. If your network service provider does not have OS 5 availabile then there will be no updates.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Update my BB8520 Curve

Hello,,,,,
i like to update my BB 8520 Curve OS
my Current Os is V5.0.0 shall i update to v.7.0 or v.6
plz tell me the steps

Hello bharathgondkar
Welcome to BlackBerry Support Forums
No.. you can't update your BlackBerry Curve 8520 to any higher OS other then OS5 , Curve 8520 don't meet those hardware requirement that's required for higher OS.
But if you're having issue with your device Software then you can always reload your device OS , to do that you can refer to this KB :
KB03621 : How to Reload BlackBerry Device Software and application using BlackBerry Desktop Software
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Question about Update Tables

Hello Gurus,
I have a question about "update table" entries. I read somewhere that an entry in update table is done at the time of the OLTP transaction. Is this correct? If so, does this happen on a V1 update or V2 update? Please clarify. Similarly, an entry in the "extraction queue" (incase you are using "queued delta" will happen on V1 update. I just want to get a clarification on both these methods. Any help in this matter is highly appreciated.
Thanks,
Sreekanth

Hi
update tables are temporary table that are refreshed by v3 job.update table is like buffer, it gets filled after updation of application table and statistical table through v1 v2 update . we can bypass this process by delta methods.
M Kalpana

HT201270 helo, my iiphone is unlock and i upgrade to 5.1 version when the upgrade finish i get this question-An update to the carrier settings for your iPhone is available. Would you like to download it now? is there a resone not to upgrade, will he becom

helo, my iiphone is unlock and i upgrade to 5.1 version when the upgrade finish i get this question-An update to the carrier settings for your iPhone is available. Would you like to download it now? is there a resone not to upgrade, will he become lock?

If your phone is factory unlocked, or officially unlocked by your carrier, updating will NOT re-lock the phone. If it was unlocke by unauthorized methods, any update or restore will re-lock it.

I need help, I cant updat my blackberry curve 8520

I nee d help, I cant updat my blackberry curve 8520 everytime i go here in blackberry site and check for update my phone it says try again.. and no updates for your software, how is that? I have v4.6 please help meee

You do, for sure, have your BB data plan active and are able to get email, etc.?
That is required for updating to OS 5.0.
If the OS you downloaded is not specifically for the carrier that is branded on the device you will need to install the OS to the computer and then when you're done, delete the vendor.xml file located in c:\program files\common files\research in motion\apploader.
Then after you delete that, in that same apploader folder, is a file called Loader.exe. Double click that to install the OS to your device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

Coupla questions after updating to Snow Leopard

Hi folks. I just upgraded from Tiger 10.4.11 to Snow Leopard 10.6.8, and boy, do I have some questions!
1. Are there any rules of thumb on reducing the probability that this OS X 10.6.8 will lock up? For example, it seems that if I'm getting the computer out of "sleep" mode or even just using the keyboard or clicking the mouse after a few minutes of inactivity, it locks up if I hit more than one keystroke or click the mouse more than one time before the internal hard drive finishes whizzing. I'm thinking that I need to get into the habit of pressing one keystroke, listening to hear whether the hard drive starts up, and if so, waiting until it settles down before making any more keystrokes or using the mouse. Any other tips?
2. What is the keyboard alternative to using the pulldown menu for force quit? Unlike my experience with Tiger, if the rainbow is spinning, this new OS won't allow me to use the cursor to pull down the apple menu to get to the force quit utility.
3. When my computer's locked up with the spinning rainbow, and the force-quit utility isn't working is there any way to get it to unlock, other than disconnecting it from the power source?
4. How bad is it to disconnect the computer from electrical power when it's locked up but still running?
5. When I was loading the OS, I thought there was a tutorial for Snow Leopard, but I can't figure out how to get back to it. Can you tell me how I get it to run?
6. I own an external HD for backup. Please tell me that Snow Leopard includes a backup utility program, and how to use it.
7. Final question for now--does Lion perform any better than Snow Leopard? Not sure whether updating to Lion would make things better, worse, or no change (other than my wallet).
Thanks for your help.
Regards,
John

Command + option + escape brings up the force quit window. Note that odds are that if you have a spinning cursor you won't be able to use the keyboard either.
3. When my computer's locked up with the spinning rainbow, and the force-quit utility isn't working is there any way to get it to unlock, other than disconnecting it from the power source?
4. How bad is it to disconnect the computer from electrical power when it's locked up but still running?
Pushing on the power button for a bout 5 seconds is basically the moral equivalent of "pulling the plug". If it's the only way "out" then it's the only way out! What's the choice?
6. I own an external HD for backup. Please tell me that Snow Leopard includes a backup utility program, and how to use it.
As above, I recommend Carbon Copy Cloner or Super Duper.
7. Final question for now--does Lion perform any better than Snow Leopard? Not sure whether updating to Lion would make things better, worse, or no change (other than my wallet)
Beauty is in the eye of the beholder. Same for usefulness and "better". In my opinion it is a schizophrenic OS that wants to be the old OSX cross bread with a IPad. Basically dumbed down. It also doesn't run ppc code since there is no Rosetta. IMO stay clear of it. Play with it in the Apple Store to get a taste.
Please, whoever is reading this, lit's not start a religious war here. This is my opinion of Lion (and many others). But if you like Lion fine with me.

Cannot get link for contact to work. Rescue email address is no longer valid and I cannot remember my security questions to update it

I cannot make any more iTunes or Apps purchases because I cannot remember my security questions. I have read online that you cannot update rescue email address (mine is no longer valid) until you answer the security questions. I have clicked on the link for support on account management but it never opens. I am very upset because all I am needing to do is make purchases. Any ideas or numbers or actual links you can post in response is appreciated.

Click here and find the phone number for your country.
(78231)

Questions about updating linked .ai files

I have two questions regarding linked images.
(1) Sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save the changes in Illustrator. In other words, I do not need to update the link in the ID links panel. Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links panel to see the changes. Is there a reason why this happens, and is there an easier way to update images than the links panel. In Quark, I could just double-click on the image and a dialog box would ask if I wanted to update the image. This isn't a big deal to me, but I thought I'd ask.
(2) Whenever I make a change to an .ai file, the linked image in InDesign always re-scales, and I can't figure out why it does so or how to make it stop doing this. For example, I placed a bar chart made in Illustrator in a frame and adjusted its +x and +y values. It came in at 100% scale and I did not change that. Then, I had to make a change to a text label on the chart, which made the graph slightly smaller. When I updated the link in InDesign, it was re-scaled to 118.12%. I had to go into the +x field in the control bar and type in 100% to get it back to the scale it was before. Is there a default setting I need to uncheck to turn this feature off? If not, is there by chance a simple keystroke that will let me re-scale the image quickly?
Thanks in advance for your help!

1. It sounds like you sometimes select the art or thename of the link and choose "edit original" and sometimes you just open the art and make changes. If you tell ID to edit original it updates at the save.
2. There are two options, depending on version, for the relink behavior and scaling. In CS5 (and CS4 if I remember correctly), you have a choice between them inthe prefs, in earlier versions it's one or the other, depending onthe version. One option is to preserve the dimensions, which is wha'ts happening to you. The other is to preserve the scale. Exactly how preserving dimensions behaves depends, too on the cropping options you used when placing the .ai file. If you cropped to aret or bounding box, for example, changing the size of the art or removing a stray point affects the art or bounding box, but cropping to media would not change.

Daily I receive a question for updating my Firefox (s.6.17 MacOs), but when I agree the result is Or no contact with the update-server

Daily I receive a message for updating my Firefox (3.6.17 MacOs 10.6.8) but when I agree, it takes quite a long time and then OR a message: no contact with the update-server OR something like: Sorry we cannot find xxxxx(?!).
QUESTION: HOW TO UPDATE?
[By the way: what about version 8.0! Is that perhaps for mobile-systems?
With regards, Jan Stevens.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Question about updating SQL Server on failover cluster

Hi all,
I would like to better understand the update process of SQL Server (2008 r2) in a failover cluster environment.
In our cluster we have 4 instances of SQL running, where two of them I am able to at anytime stop the instance and update it.
The question is... Applying the latest update, will update forcibly all instances installed on that node, or do I have the ability to choose which instance I want to update?
This way, I could "test" the update process in those two SQL Instances, as described in http://support.microsoft.com/kb/958734 and after finishing I would update the remaining instances.
Please let me know.
Thanks in advance.
Nuno Silva

Hi Nuno,
It's a failover cluster issue, I moved it to SQL Server High Availability and Disaster Recovery. So that you can get better help.
Regards,
Charlie Liao
TechNet Community Support

Question on updating Opportunities

I am writing a Java code to connect to the webservices and do a query/update opportunities.
I am able to establish the session and when I do a search with out setting the OpportunityId I get weird results with all the data blank/null.
If I set the OpportunityId as blank string I do get some results.
objOpportunity_Type.setOpportunityId("");
Out of the oppertunities I get if I take one of the oppertunity ID and set it in the search criteria
objOpportunity_Type.setOpportunityId("='XXXXXXX'");
and run the query on it I am not getting any results.
Am I missing anything ?
Thanks

Max,
Thanks for the quick response.
Yes, The opportunity ID is in XX-XXXX format. I am able to see it using the URL you sent. https://secure-ausomxbqa.crmondemand.com/OnDemand/user/OpportunityDetail?OMTGT=OpptyDetailForm&OpptyDetailForm.Id=1-EES8EV
But when I try to set that as the Oppertunity ID and execute the query in Java I am not getting any results. Here is my code snippet.
String strServername = "secure-ausomxbqa.crmondemand.com";
String username = "xxxxxxxxxx";
String password = "xxxxxxxxxx";
objSession = new Session(strServername, username, password);
String sessionID = objSession.logonSSO();
System.out.println("Connection Succesfull .., Session ID is= " + sessionID);
OpportunityWS_OpportunityQueryPage_Input opQPInput = new OpportunityWS_OpportunityQueryPage_Input();
OpportunityWS_OpportunityQueryPage_Output opQPOutput;
opQPInput.setUseChildAnd("false");
opQPInput.setPageSize("20");
opQPInput.setStartRowNum("9000"); //using a random number here ..just for a test
Opportunity_Type[] opportunityInputArray = new Opportunity_Type[1];
Opportunity_Type objOpportunity_Type = new Opportunity_Type();
objOpportunity_Type.setOpportunityId("='1-EES8EV'");
opportunityInputArray[0] = objOpportunity_Type;
ListOfOpportunity objListOfOpportunity = new ListOfOpportunity(opportunityInputArray);
opQPInput.setListOfOpportunity(objListOfOpportunity);
System.out.println("Calling the service...");
//get the output
opQPOutput = OppertunityHelper.queryOpportunitys(objSession, opQPInput);
System.out.println("Oppertunity Output object = " + opQPOutput);
ListOfOpportunity objListOpp = opQPOutput.getListOfOpportunity();
System.out.println("last page= " + opQPOutput.getLastPage() );
//int noOfOpportunity = objListOpp.getOpportunity().size;
Opportunity_Type[] opportunityArray = objListOpp.getOpportunity();
System.out.println("opportunityArray = " + opportunityArray);
//Create the objOppUpdInput object for running the updates
//using the same list that we got from the query as we are updating all the oppertunities
//TBD: what is the second parameter, Echo ??
OpportunityWS_OpportunityUpdate_Input objOppUpdInput = new OpportunityWS_OpportunityUpdate_Input(objListOpp, "");
for(int i=0; i<opportunityArray.length; i++)
     Opportunity_Type objOpportunity = opportunityArray;
     //get the data
     System.out.print("Opportunity ID=" + objOpportunity.getOpportunityId());
     System.out.print("Account Name=" + objOpportunity.getAccountName());
     System.out.print("Account ID=" + objOpportunity.getAccountId());
     System.out.print("Account Location=" + objOpportunity.getAccountLocation());
     System.out.println();
Another question I have is if I need to query all the opportunities in the system do I need to set the Oppertunity ID as blank string ?
objOpportunity_Type.setOpportunityId("") ? If I don't do that I am getting oppertunities with ID as null and also I get some exceptions like "No user key can be used for the Integration Component instance 'Opportunity'"
Thanks

Question about updating to Logic 9 and 64-bit

Hey guys, thanks for reading.
About 5 years ago I purchased the student discounted version of Logic Studio 8 (does not support upgrades of any kind). I have used this until now in conjunction with many Eastwest and Spectrasonics audio units.
I am now considering buying Logic Pro 9 to take advantage of 64-bit technology (which is a new concept for me), which will help my Eastwest and Spectrasonics audio units make full use of my 8GB of ram. No more crashing or slowing, hooray!
Here is my question: if I want to use all of the old reverbs, EQs, instruments, and jam packs that came with my Logic Studio 8 five years ago, do I need to purchase Logic Studio 9? I was hoping I could just buy Logic Pro 9 and that all the old plugins and instruments that came with my Logic Studio 8 will still function. I use Space Designer and a few select instruments from the Jam Packs quite frequently.
However, because these plugins and instruments came from Logic Studio 8, five years ago, and I doubt I can upgrade the files in any way because it was the educational version, I'd imagine that they are 32-bit.
Sorry if that was long and convoluted. Logic doesn't have a simple support line and I want to make sure I buy the right product!

If you buy Logic Po 9 from the App store.. all that extra content is available to download directly from inside the Logic Pro 9 App now (It's a menu option) so you won't lose anything.... and you get all your old versions updated and the for free!
The Logic Pro 9 from the App store acts as both an upgrade version from earlier releases such as Logic 8 and as a fresh install without the need for any prior versions instaled.

Question on updating my BlackBery Curve 3520???

Similar Messages

Maybe you are looking for