Question on using WildCards

I just can't figure out why below codes compile with errors
        List<? extends Object> output = new LinkedList<Object>(); //line 7
        output.add(new Object()); //line 8Compilation Errors:
D:\my_NetBeansProjects\JavaBook\Mock\src\BackLister.java:8: cannot find symbol
symbol : method add(java.lang.Object)
location: interface java.util.List<capture#325 of ? extends java.lang.Object>
        output.add(new Object());
Note: D:\my_NetBeansProjects\JavaBook\Mock\src\Sortee.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
1 error
BUILD FAILED (total time: 1 second)Line 7 is ok, so I wonder HOW can we use it in practical? As if line 8 fails, it seems useless!
It is a mock question of SCJP 6 from a book.

roamer wrote:
Back to the topic.
List<? extends Object> output = new LinkedList<Object>();1. If it is a read-only list, in what situation will we use it? It seems that we never use it apart from exam question.
Edited by: roamer on 2010?1?9? ??6:24I didn't say that you use that exact line, but you could e.g. use List<? extends SomeType> as the type of the argument for a method that e.g. counts frequency or does something else that it only needs to iterate over values and read data.
Kaj

Similar Messages

Using wildcards in URL variables (very simple question, i know)

Hi all!
Pulling my hair out over this... How do I use wildcards in URL variables? I have this code in compositionReady (which is working):
var myurl = "http://www.mydomain.com/sub1/sub2/pagename";
var currenturl = window.location
if(myurl == currenturl) {
sym.getSymbol("symbolname").play();
It simply makes the symbol "symbolname" play when the current URL matches the variable 'myurl'. However, I want the symbol to play on ALL subpages to http://www.mydomain.com/sub1/sub2/ and therefore it seems logical to put in a wildcard like:
http://www.mydomain.com/sub1/sub2/* or something similar, but I just can't seem to make it work??
Any help will be greatly appreciated!
Best,
Thomas

What about this ?
var mysubdomain = "http://www.mydomain.com/sub1/sub2/";
var currenturl = window.location.toString();
if(currenturl.indexOf(mysubdomain) === 0) {
sym.getSymbol("symbolname").play();
-Dharmendra

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

Using Wildcards in Mapping Script

Hi everybody, im new in FDM and i have some doubts about mapping scripts.
I have to recreate this Hyperion Translation Rule into FDM:
ACC_SAP              tm_sap     Reverse Sign         UD4
N21099Z300     {NULL}     FALSE     CD1
D31199Z000     {NULL}     FALSE     CD1
????99     *     FALSE     CD
ACC_SAP is the source account
TM_SAP will be loaded into UD5 (as look up)
How could i manage with a like mapping?
I guess using a script but im not sure how to use wildcards within scripts, is it possible?
Another related question, in a explicit mapping, how can i manage with NULL values if i want to assign them [None] value, do i have to put NULL in th source field?
BR and thanks

Thanks KellyDGreen. With the exampl shown is as you say but what if tm_sap has wildcards?
F.i
ACC_SAP TM_SAP TARGET_CUSTOM4
999? 123? 198276
Suppose that TM_SAP has been stored in UD5. Source dimensions are different from target dimension so i have to do it via script, dont I?
BR
Francisco

How to search for files using wildcards * and ?.

Hi All,
I've been searching the forum for a couple of hours now and have been unable to find a good example of how to search a directory (Windows OS) for a file using wildcards * and/or ?. Does anyone out there have a good example that they can share with me?
Thanks

Hi All,
First of all I want to thank everyone for taking the time to respond to my question. All of your responses where greatly appreciated.
I took the example code that was posted by rkconner, thanks rkconner, and modified it to allow me to search for files in a directory that contain * and/or ?. Yes, I said and/or! Meaning that you can use them both in the same file name, example: r??d*.t* would find readme.txt.
I've posed my complete and thoroughly document code below. I hope it is very helpful to other as I have searched many forums and spent many hours today trying to resolve this problem.
Enjoy
* File Name: WildcardSearch.java
* Date: Jan 9, 2004
* This class will search all files in a directory using the
* asterisk (*) and/or question mark (?) as wildcards which may be
* used together in the same file name. A File [] is returned containing
* an array of all files found that match the wildcard specifications.
* Command line example:
* c:\>java WildcardSearch c:\windows s??t*.ini
* New sWild: s.{1}.{1}t.*.ini
* system.ini
* Command line break down: Java Program = java WildcardSearch
*                          Search Directory (arg[0]) = C:\Windows
*                          Files To Search (arg[1]) = s??t*.ini
* Note: Some commands will not work from the command line for arg[1]
*        such as *.*, however, this will work if you if it is passed
*        within Java (hard coded)
* @author kmportner
import java.io.File;
import java.io.FilenameFilter;
public class WildcardSearch
     private static String sWild = "";
      * @param args - arg[0] = directory to search, arg[1] = wildcard name
     public static void main(String[] args)
          String sExtDir = args[0]; // directory to search
          sWild = args[1];   // wild card to use - example: s??t*.ini
          sWild = replaceWildcards(sWild);
          System.out.println("New sWild: " + sWild);
          File fileDir = new File(sExtDir);
          File[] arrFile = fileDir.listFiles(new FilenameFilter()
               public boolean accept(File dir, String name)
                    return (name.toLowerCase().matches(sWild));
          for (int i = 0; i < arrFile.length; ++i)
               System.out.println(arrFile.getName());
     }     // end main
     * Checks for * and ? in the wildcard variable and replaces them correct
     * pattern characters.
     * @param wild - Wildcard name containing * and ?
     * @return - String containing modified wildcard name
     private static String replaceWildcards(String wild)
          StringBuffer buffer = new StringBuffer();
          char [] chars = wild.toCharArray();
          for (int i = 0; i < chars.length; ++i)
               if (chars[i] == '*')
                    buffer.append(".*");
               else if (chars[i] == '?')
                    buffer.append(".{1}");
               else
                    buffer.append(chars[i]);
          return buffer.toString();
     }     // end replaceWildcards method
}     // end class

Query selection filter by using wildcards

Dear all,
we have SAP BI 7 and we would like to increase usability of the end-user. We would like to use wildcard ('*') in the variable selection field of a reporting query to make the search/filter easier. Therefore, the search should support at least wildcards or even better the functionalities of R/3 (give results which are similar than to the searched word).
An example:
A report shows sales volume per customer and country. The user has to select in the variable selection the customer before the report is showing. As there are thousands of customer listed, the user should be able to use wildcards to list only relevant/wanted (e.g. 'ak*' and should get all customers containing any string like AK, ak, or other variants --> Independent if lower or upper case has been entered in the filter search).
Question:
1) How can you enable this wildcard filter function?
2) Is there any documentation/example available what can be entered and how the result is showing
Thanks for your support!!!
Edited by: Markus Reith on Jan 7, 2008 3:34 PM

Hello,
When u create a variable on infoobject for selection, select selection option from drop down box of details tab. Now when u execute the report it will give you a box before the input box, select * in that and the wildcard function should work. Just try it out.
Regds,
Shashank

Can i use wildcards in function module .

Hi All,
I am using 3 input parameter in my function module .Can i use wildcards for one of the parameter .If so please kindly let me know the procedure.if u give sample code it will be great.
Thanks,
Veera

Hey Wayne....that helped alot. I simplified the formula a bit for this question but your answer led be to my answer. I plugged in the "isblank" function into my formula to get the state of the cell.
For general reference, this is my final formula:
=IF((ISBLANK(S2)),F2−E2,0)
It's saying "if S2 is empty then run the formula "F2-E2" else (if S2 is not empty) then print "0".
Thanks again.
Update: based on the answers, here is another way to sove my probem:
=IF(D2="",F2−E2,0)
If "D2" is blank then run "F2-E2" or else show 0.

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

Using wildcards in import statement

I typically use wildcards in my import statements. For example:
import javax.swing.*;
Are there any advantages, though, in specifying exactly which classes I am importing?
For example,
import javax.swing.JPanel;
import javax.swing.JLabel;
import javax.swing.JEditorPane;
import java.swing.JProgressBar;
// etc.
Specigically, is the resulting class file any smaller if I specify exactly which classes to use and does the Java runtime engine load faster if I specify exactly which classes I use in the import statemetents?
Thanks,

Import has precisely zero runtime impact. I believe it is used to help locate the specified class at runtime. Take the following 2 simple source files:
import java.util.Vector;
//import java.util.*;
public class VectorTest
     public static void main( String[] args )
          Vector v = new Vector();
          v.add("Item 1");
          v.add("Item 2");
          System.out.println( v.get(1) );
public class Vector
     public boolean add(Object o)
          return true;
     public Object get(int index)
          return "doh!";
}1) Run the code as is and "Item 2" is displayed
2) Recompile the code using the generic import and "doh!" is displayed.
The point is that by fully qualifying the import statement you are sure you are executing the correct class and not just some class that happens to be lying around somewhere in your classpath.

How to use wildcard in filename , in SyncRead operation in File Adapter.

Hi All,
Is this possible to use wildcard character in file name while creating file adapter for SyncRead Operation.
I used write*.txt as a file name to read. But got below error -->
file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_notification2_1.0_93d419d1ca67f87872914bf6daf16180.tmp/readfile3.wsdl [ SynchRead_ptt::SynchRead(Empty,Es) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No file to process.
File d:\temp\temp1\write*.txt to be processed was not found or not available
; nested exception is:
ORABPEL-11007
No file to process.
File d:\temp\temp1\write*.txt to be processed was not found or not available
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
Best Regards
Vikash

You cannot defined the wildcard for the file names. But you can provide the file name dynamically if you are on soa suite 10.1.3.4 minimum. You can get information about that in this link http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDBBFBD

Using Wildcards in Value Help

Hi,
I have a input filed ZPERNR and i have assigend PREMN search help on this field.
I am able to search people in the organisation and it all works great until I use wildcards
When I enter SMITH in the last name in the value help it comes back with the list of people whose last name is SMITH
Problem:
When I enter SMITH* in the last name I get no results
In the SQL trace I noticed it changed my SMITH* to smith%
Not sure if there is any sap note to this issue
Any ideas?

Hi Jörg,
Yes the icon (Pattern) does appear after I enter, however I still don't get any results.
The weird thing is the value help works perfectly alright in r/3
Not sure why it is not working for me in the portal.
Thanks for your reply
Kal

Using wildcards in RDBMSRealm

Hello.
I'm using WLS 5.1 with SP6 running on JDK1.2.2, platform is Windows NT
Server 4.0 SP6.
I want to know if there is a way to use wildcards to create entries for
RDBMSRealm.
The reason I want to use wildcards is that if I create an entry in the
ACLENTRIES table like this...:
A_NAME : weblogic.url
A_PRINCIPAL : testuser
A_PERMISSION : /index.html
I can restrict access for the URL http://localhost:7001/index.html to
"testuser."
However, when I create this entry, weblogic prompts for a username even if I
access a URL other than http://localhost:7001/index.html, for example,
http://localhost:7001/test.html.
When this happens, I cannot access "test.html" by using any of the usernames
that I have listed in my RDBMSRealm USERS table.
I was thinking that this works like the "weblogicURL.policy" file.
If you create one entry in the "weblogicURL.policy" file, all other URL
defaults to "everyone deny access".
I remembered that you can use wildcards in the "weblogicURL.policy" file, so
I tried changing the A_PERMISSION column to the following six patterns...:
A_PERMISSION : *
A_PERMISSION : -
A_PERMISSION : *.html
A_PERMISSION : /*
A_PERMISSION : /-
A_PERMISSION : /*.html
Using the six patterns, I tried to access http://localhost:7001/test.html
each time.
However, none of the four patterns above seemed to work, since I was
prompted and couldn't access even if I tried every username that I have in
my RDBMSRealm, in all of the six cases.
If I cannot use wildcards, this means that I would have to create entries
for every single HTML pages. (probably JSP pages, too)
Is there a way to use wildcards in the RDBMSRealm so that I can simplify
this?
Thanks ahead of time.
RYotaro.

Thanks, Terry and Kishore!
I guess it's not a very smart idea to restrict access on URLs using the
RDBMSRealm...
What I was thinking was that if it was possible to put entries for Servlets,
URLs, etc... into one place, it would be easier for managers to manage
access control.
# For instance, it could cause some people confusion if access control for
URLs are listed in weblogicURL.policy and servlets are listed in RDBMSRealm.
It would be better if all of the entries are written in one place.
As a matter of fact, I have tried web-applications some time ago, and am
thinking of going back to it.
# As I recall, web-applications cannot be "hot-deployed." But there's
probably a way to get around it.
Thanks again!
Ryotaro.
"Kishore Talari" <[email protected]> wrote in message
news:[email protected]...
>
Try using a web application! Servlet spec 2.2+, WLS 510, SP6.
You can do a world of URL patterns!
The only change you will have to make is package the jsp/html,etc pagesinto a .war archive and write a web.xml file.
>
"Terry" <[email protected]> wrote:
I'm not sure that this is the way you want to go about it.
AFAICR there is no need to add aclentries in the RDBMSRealm database when
using the weblogicURL.policy file - simply add an entry to the policy
file
allowing access to all urls for all users, then add more specific entries
for those urls you wish to restrict access to. Adding stuff to the
ACLENTRIES table will not have any effect (I know because that is what I
tried first).
The documentation on wublogicURL.properties should tell you all that you
need to know
terry
Ryotaro Toda <[email protected]> wrote in message
news:[email protected]...
Hello.
I'm using WLS 5.1 with SP6 running on JDK1.2.2, platform is Windows NT
Server 4.0 SP6.
I want to know if there is a way to use wildcards to create entries for
RDBMSRealm.
The reason I want to use wildcards is that if I create an entry in the
ACLENTRIES table like this...:
A_NAME : weblogic.url
A_PRINCIPAL : testuser
A_PERMISSION : /index.html
I can restrict access for the URL http://localhost:7001/index.html to
"testuser."
However, when I create this entry, weblogic prompts for a username even
if
I
access a URL other than http://localhost:7001/index.html, for example,
http://localhost:7001/test.html.
When this happens, I cannot access "test.html" by using any of theusernames
that I have listed in my RDBMSRealm USERS table.
I was thinking that this works like the "weblogicURL.policy" file.
If you create one entry in the "weblogicURL.policy" file, all other URL
defaults to "everyone deny access".
I remembered that you can use wildcards in the "weblogicURL.policy"
file,
so
I tried changing the A_PERMISSION column to the following six
patterns...:
>>>
A_PERMISSION : *
A_PERMISSION : -
A_PERMISSION : *.html
A_PERMISSION : /*
A_PERMISSION : /-
A_PERMISSION : /*.html
Using the six patterns, I tried to accesshttp://localhost:7001/test.html
each time.
However, none of the four patterns above seemed to work, since I was
prompted and couldn't access even if I tried every username that I havein
my RDBMSRealm, in all of the six cases.
If I cannot use wildcards, this means that I would have to createentries
for every single HTML pages. (probably JSP pages, too)
Is there a way to use wildcards in the RDBMSRealm so that I cansimplify
this?
Thanks ahead of time.
RYotaro.

Using wildcards in strings

Hi all, I was wondering if it's possible to use wildcards in NSStrings?
So for example say my text is:
"The quick brown fox jumps over the lazy dog".
And I want to extract the string "quick brown fox".
Something like?
(@"quick*fox");
Is there a wildcard that can be used to extract the text between quick and fox? I know I could just strip out 'quick brown fox', but what if I didn't necessarily know it was 'brown' between them, and it was some other word?
Thanks a bunch!

There are a couple of regex libraries in the open source.

Using wildcards in CCM 2.0 search

Hi experts
we're using SRM 5.0 (SRM 5.5 Server) with CCM 2.0.
Is it possible to use wildcards in catalog search?
Are there any documents about wildcards in CCM ?
Regards.
Sven

Hi
Yes TREX is mandatory for CCM2.0 (written in the master guide). Please restart the TREX server and retry, if this does not in your case.
I guess, There are two wildcard characters:
? stands for a single character
stands for a sequence of any combination characters of any length.
Related links ->
CCM 2.0 Simple search on CSE does not show any result
Re: Cross catalog search doesn't work for CCM 2.0
Re: Search function for Catalogue CCM 1.0 SRM version 4
CCM view rules - based on wild cards?
Re: Is TREX required for CCM 2.0 search?
Hope this answers your queries. Do let me know.
Regards
- Atul

How to use wildcards in ABAP query where condition?

Hi,
Please tell me how to use wildcards in ABAP qurey where condition.
e.g. select * from mara where matnr = * (wildcard we need to use.
Thanks & Regards,
Gaurav T

Do you want to query asterix * ?
select * from mara where matnr = '*'. "then just put it in apstrophes
or you want certain part of string be used as * ?
select * from mara where matnr like '%*' "then use % sign before it
or maybe you want something like this
select * from mara where matnr like '%1' . "then it will look for all materials having '1' inside it
Regards
Marcin

Question on using WildCards

Similar Messages

Maybe you are looking for