Question on Values from Report Painter

Hi All
I have defined a report painter report using the Library 0FL allowing the dril down functionality.
however, when i drill down on a certain figure, the amount showin on the report is not in sync with the total I get when i drill down..
Can anyone suggest to me why this is happening and how i can get the 2 figures to match?
Thank you
Rukshana

Hellio Rukshana,
I would suggest you to please check the SAP Note 1317478 (Report Writer: Drilldown not handled properly).
In case the problem is not solved, please execute first the report RFFMRC20 and later report RFFMRC04 and reconstruct data.
Here it is important that you execute these programs only for the earmarked fund that you are having the issue. Execute it in one test system in test run first and look for results.
RFFMRC04 program analyzes differences between line items and totals records in Funds Management.
If you start the program as an update run, it automatically adjusts the relevant totals records.
Ensure that no postings are made while the program is running as this may lead to errors being displayed where none has occurred. If the program finds FM account assignments where the line item total is not the same as the relevant totals record, these lines are marked in red. The system displays the amount total (totals record), line item total, and amount type for each line.
Please check the documentation of this program in SE38 for more information.
I hope this helps.
Kindly let me know if you are talking about some other drill down fucntionality other than the above.
Thank you.
Suresh Jayanthi.

Similar Messages

Inavalid Values from Report Painter

Hello,
I want to know if that anyone faced this following problem:
- Executing FC10 from period 1 to 16 I have X $ (and there are correct), but if I choose one report Z (from fsi*), I have the correct value, but just for period 1 to 12, if I extract the report from period 1 to 16, I have invalid values for a determinate accounts. Does anyone know how to correct that?
Regards,
P.

Hi Goutan,
Thanks for your reply.
I have already verified that and the periods are set up right..
Do you have another idea what might is wrong?
Thanks!
P.

Retruning parameter/value from report to form - (Urgent)

Hi ,
I am calling a report (2.5) from a form using RUN_PRODUCT. I would like to know if there is any way to do the following.
(a) Return a value from reports to calling form. For ex. I would like to know the last Item name (assuming the reports prints all items in inventory) printed. I am sending a from and to numbers of item id's (range) and I need to know the last item printed.
(b). Check the success of report. For example, while printing the 5 items (the range that I passed) if there is any error in printing , this should be tracked either in the form or report. If this is not possible using run_product , If I need to use srw package, how to use it. Can I call the report as usual with run_product and in the after parameter trigger can, I call the report again and track error.
Any help will be appreciated.
Thanks

Please repost your question in the reports forum

How to pass value from report to form?

Dear,
I built a report and I create button on report too. This
button will show a form that I want it to automatically show
receivable values from report so that user don't complete them.
So I create a button on the report . I enter Javascript in
PL/SQL Code tab in '...after displaying the footer' as follow :
htp.formOpen
(owa_util.get_owa_service_path||'portal30.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1736929105&p_arg_names=_show_h
eader&p_arg_values=YES&p_arg_names=GNO&p_arg_values=1&p_arg_names
=QNO&p_arg_values=2');
htp.formSubmit(null,'New Answer');
htp.formClose;
GNO , QNO is value which I want to pass
As you can see, the above code can pass only static value.
But I want to pass values that is the condition of this report.
I mean,such as, this report show data that gno=1 and qno=2 and I
want to pass these values to form. So both value will appear in
gno and qno field.
So please tell me what should I do. Please help me. I don't
know how to do it. I look forward to hearing from all of you.
Please!!!!!! Don't hesitate to answer.
Thank you very much
Sirin Kittichotpanich

Hi Marc,
Yes, you have it correct in what I am trying to do and if I put a default value in the hidden item on page 2 and run it then that works fine. I just can't get the value from the form passed to page 2 for some reason. There are actually 22 items on the form that can be filtered but just using COREID for simplicity. When I run the form I am just entering a value in the COREID field to try and return those records. Most of the other items on the form are displayed as Popup LOV(fetches first row). Would the values of all these be done the same in a comma delimited list for the items and values? I was trying to get at least one of them working first. Here is the search result that comes up in the debug window:
Search Results
0.01: Item: P2_COREID HIDDEN
0.01: show report
0.02: determine column headings
0.02: parse query as: MOTEAMSAPEX
0.02: binding: ":P2_COREID"="P2_COREID" value=""
0.02: print column headings
0.02: rows loop: 15 row(s)
No data found.
Here is the SQL statement:
select coreid, serialnumber
from MOTEAMS.V_ASSETS where
instr(UPPER("COREID"), UPPER(:P2_COREID)) > 0
The branch settings are:
Set these items: P2_COREID
With these values: &P1_COREID (also tried this with period at the end)
I am new to this and not familiar with apex.oracle.com. How would I go about posting to that site?
Thanks,
Pam

Question about sets in report painter.

Hi, everybody. Please, could someone help me in this matter?.
I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
The XXX set cannot be deleted.I consult the error with the help and SAP tells me that I need to use the set-usage option to view where the set is used in the system.
I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set and the error continues with report or without it.
That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
Thanks and I hope someone can help me out!!

Hi, everybody. Please, could someone help me in this matter?.
I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
The XXX set cannot be deleted.I consult the error with the help and SAP tells me that I need to use the set-usage option to view where the set is used in the system.
I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set and the error continues with report or without it.
That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
Thanks and I hope someone can help me out!!

Downloading data from report painter report in background

Hi Guy,
I have a requirement where in have to schedule the job and download the data on application server from report which is been written report writter. there is an option to save the export paramater but i can download it only in forground.
Any one have any idea on this...or the other idea is to run the function and get the values from report written in report writer ...so i can use it in my program and download.
Atul

Hi,
If you run program in Background job sheduled then goto Spool - > there you can file your report - You can download that report.
Regards
Md.MahaboobKhan

How to make smartform get data from report painter???

hi all!
please tell me how to get data from report painter?
i has a report painter zabc ( create through t-code ke31).
I want get data from Zabc after run and show data by smartform.
plz help me!
thanks

Hi ,
Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Smart

How to create report from report painter??

Hi,
how to create report from report painter?? from transaction code GRR1

Select the library that you want report to create. GRR1
You select what to list in coulumns and what to lisr in rows. You could select characteristics or key figures.
You can use variable both in defininig row and coulmn or in general selection.
You can also use sets as variable or as constant. These sets can be your master data groups or sets in GS02.
You can use formulas.

Selection values in Report Painter Report

Hi All,
I am creating a report painter report for Plan/Actual values using library 0FL.In my characteristic value column I included fiscal year as a value and hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
Fiscal Year
Fiscal Year
Company Code
Period
From Profit Center
To Profit Center
How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have profit center values.I dont know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
Regards
Shaun

HI Shaun
In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
Regards
Ajay M

Carry Farward value in Report Painter

Hi Gurus,
I am using FAGLFLEXT table for some of the report painter reports.
I wanted to have a report, where the Balance carry forward value should be shown.
The trasaction type is always RFBU. How to include the c/f values...
Which Charateristics I should use to include these values...
regards
Saba

hi..
Goto GRR3 > click on Lib 1VK it will show you all the report in 1VK library > select your report & double click on it
It will display the report format. Then go to Edit at the top. you will find General data selection.click on it you will find available characteristics. Then goto GRR2 for making any change/selection for Fiscal year char
If your report is a standard one you can not change. then copy the report from GRR1 and make the changes.
You can also see the char in GR23 by selecting 1VK lib.
kkumar
Edited by: kkbdsp on Mar 11, 2011 9:21 AM

Planned values in report painter

Hello,
Does anybody knows if it is possible to extract planned values (planned through transaction code FSE5N) into a report built through report painter tool?
My report is comming out with "0" values even though I have selected plan version and Plan/Act. indicator.
Appreciate any help!
Paula Rocha

Hi Stacey.
I have just tried, and no changes... Still have "0" values...

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

Passing a value from Report A to B when B is in a different Subject Area

I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?

Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/

Passing value from Report Column to Javascript

Dear Apex wizards,
I am a bit stuck right now with implementing a modal pop-up/iframe/javascript and this forum is my last hope to fix this issue.
Anyway, will try to explain what I am trying to accomplish.
What I need is: I want to have an SQL report, as a very first column I want to have an "ID" numbers from my table and I want this column to have a "Column Link" set in "Column Attributes" proper ties. The trick is, that when I click on the column link (when I run my report on Apex page) I need a JQuery modal window to pop-up where in IFrame will be another page and this page will use an "ID" from my column link URL to display data. So, basically I want to pass an "ID" value from my parent page to my child page which is displayed in iFrame of modal window.
And here is what I have:
1. I do have an SQL report:
select SUBNET_ID,
       long2ip(NETWORK_ADDRESS),
       long2ip(SUBNET_MASK),
       long2ip(END_HOST),
       long2ip(START_HOST),
       MAX_HOSTS,
       long2ip(BROADCAST_IP),
       NETWORK_CLASS,
       NETWORK_SIZE,
       HOST_SIZE
from   YC_CM_IP_SUBNETS 2. Then, in "Column Attributes" for "SUBNET_ID" a have set a "Column Link" to URL as : javascript:ViewNetworkDetails(#SUBNET_ID#); 3. Now, when I run my page and point my mice on any item in my "SUBNET_ID" column I can see that it is getting a "SUBNET_ID" number from my table and it shows it in the buttom of the browser as :javascript:ViewNetworkDetails(1);, or (2) or whatever "SUBNET_ID" is. So, that is good.
4. And here I am getting confused, basically I have to pass a value of javascript:ViewNetworkDetails(#SUBNET_ID#);, which seems to work as it gives me correct numbers from my table, to my "ViewNetworkDetails" JavaScript function, so it can paste this value into "f?p=........." iFrame URL. Below is my Jquery Modal form script and Javascript to redirect me to my popup page (the script is in HTML Header):
<script type="text/javascript">
function ViewNetworkDetails(){
var apexSession = $v('pInstance');
var apexAppId = $v('pFlowId');
var subnetIDNumber = document.getElementById(#SUBNET_ID#);
$(function(){
vRuleBox = '<div id="ViewNetworkDetailsBox" title="View Subnet Details">
<iframe src="f?p='+apexAppId+':103:'+apexSession+'::NO:103:P103_SUBNET_ID:'+subnetIDNumber+'
"width="875" height="500" title="View Subnet Details" frameborder="no"></iframe></div>'
$(document.body).append(vRuleBox);
$("#ViewNetworkDetailsBox").dialog({
                        buttons:{"Cancel":function(){$(this).dialog("close");}},
                        stack: true,
modal: true,
                        width: 950,
resizable: true,
autoResize: true,
draggable: true,
close : function(){$("#ViewNetworkDetailsBox").remove();
                        location.reload(true); }
</script> P.S. My assumption is, that there is a problem with this part of my scriptvar subnetIDNumber = document.getElementById(#SUBNET_ID#); where I cannot get my "SUBNET_ID" value from javascript:ViewNetworkDetails(#SUBNET_ID#); into "subnetIDNumber" variable and that is why I cannot pass it to my iFrame URL.
P.S. P.S. the child page 103 has a "Automated Row Fetch", so it is not a problem. In addition, I did a simple test, where I had a page item "P102_Value" with some value and in my script I had instead var subnetIDNumber = document.getElementById(#SUBNET_ID#); this var subnetIDNumber = $v('P102_Value'); and it worked perfectly fine....but cannot make it working against SQL Select statement :-(
HEEEEEEEEEEEEEELLLLLPPPP.
Thanks

Change your column link to send the subnet_id column's value to the function call (you mentioned it, but I m not sure if you actually did)
javascript:ViewNetworkDetails(#SUBNET_ID#);<u>You are passing the parameter value to the function, but not defined any parameters in the function definition</u>(this is possible in JS, any extra parameters is ignored)
So, modify the function to accept the subnet ID parameter(I am actually surprised how you missed this) and assign that parameter to variable.
<script type="text/javascript">
function ViewNetworkDetails(pSubnetId){
var apexSession = $v('pInstance');
var apexAppId = $v('pFlowId');
var subnetIDNumber = pSubnetId;
//rest of the code would be the same

Pass value from report on skillbuilder modal page

I am using the skillbuilder modal dialog. I have a report that displays in the modal. I want to pass a value from the report back to the page that called the modal and then close the modal. I have tried several different things, but I have not been successful. Any ideas?

Not sure if you have completely read the instructions.pdf that comes with the plugin. The "Events" section (Auto Close event) under "Advanced Usage" in the pdf may help you.
Anyways, I have not tried this solution.

Question on Values from Report Painter

Similar Messages

Maybe you are looking for