Question on video clips??

I'm not sure why but all the video clips are ending as a still shot??? I didn't set it up that way and it hasn't done this before so BUT i just did a software update...is this something that is a automatic setting? Please help! I don't want to have to start my movie all over again!!

apitnikoff wrote:
I'm not sure why but all the video clips are ending as a still shot??? ...
when the playhead reaches the very last 'frame' of a movie and stops - what should it show in your opinion? an automatic fade-out?
welcome, apitnikoff, to  boards ...

Similar Messages

Stupid question? Video Clip

I want to animate some text, but i only want one of the words
to animate while the rest of the words fade out. I know i can
convert the one word to a video clip and double click it and make
it do something that way, but how can i put that video clip into
the main scene? Is this the best way to do this?

"video clip"? I think you mean "Movie Clip symbol".
Place the text you want to fade out in it's own text field
(Static) and convert it to a symbol. Then
create a 2nd keyframe and adjust the opacity (Properties).
Apply a motion tween.
To place symbols on the stage - drag from the Library. You
can also animate this straight on the
flash stage.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Mysterious Bob wrote:
> I want to animate some text, but i only want one of the
words to animate while
> the rest of the words fade out. I know i can convert the
one word to a video
> clip and double click it and make it do something that
way, but how can i put
> that video clip into the main scene? Is this the best
way to do this?
>

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil

Using You Tube video clips question:

After importing several clips from You Tube (of varying quality) to incorporate into an editing project, the clips look okay and play full screen, in the "source" window, but when I put them in the timeline and play them in the "program" window, they are thumbnail size. Why does this happen? I tried converting...but still no luck.

JSS1138 wrote:
Re: Using You Tube video clips question:
The short answer here is, don't. (Assuming that if it was yours in the first place, you'd have the original and not have to use the upload.)
And Bill, you should know better than to help someone violate copyright law.
yeah, i beg to differ on this. i have 100s of videos on youtube i did back when it first started before i saved my finished projects... (from 2005-2008 i would just record, edit, post, delete, because it was just random junk of me hanging out with friends, or just v-logging about stuff i needed to blow steam about) so one of these days i'll have to go through and download them and burn them for archives. Never say never

When I go to youtube and view a video clip it usually asks if i want to save the video I'm watching. Now all of a sudden it no longer asks the question. How do I get it back?

when I go to youtube and view a video clip it usually asks if i want to save the video I'm watching. Now all of a sudden it no longer asks the question. How do I get it back?

I believe that might be related to this:
See: http://real.custhelp.com/app/answers/detail/a_id/7303/p/3/c/2222/r_id/119487
Real is always, it seems, late in releasing updates for new browser updates. They are given the same opportunity during the Firefox pre-release testing as other developers to be sure that their products will work with new Firefox releases.
But, alas, always the same problem!

When I import video clips, why are they only recognized as audio clip? [was:Question]

When I import video clips, why are they only recognized as audio clip?

Please do not post the same question twice http://forums.adobe.com/thread/1450571?tstart=0
If you are using Premiere Pro, you need http://forums.adobe.com/community/premiere?view=discussions
If Premiere Elements, you need http://forums.adobe.com/community/premiere_elements?view=discussions
If some other program, post the name of the program

Questions about editing video clips, images and text

I'm using the Expert mode and I'm having trouble with figuring out how to do certain things.
1. I'm superimposing a picture of a scoreboard on my video and then I superimpose a text object on top of that so I can update the scores throughout the video. I've placed on instance of the text object on my "Video 3" and now I want to change the score. So I created another instance on the same "Video 3" timeline. Now I want to close the gap between the two instances. I would expect to be able to click on the gap in between and delete it but nothing happens. I would also expect to be able to double click on the instance to access the specific start and end times that I see when I hover over it. But again nothing happens. So I've been magnifying the timeline so I can manually drag the two instances together. Is there an easier and more precise way to close the gap?
2. Is there an easier way to periodically change a text object without creating a bunch of instances? My "project assets" folder is getting filled up quickly because the score is constantly getting updated and I keep creating a new instance for each score change.
3. Is there a way to permanently combine two seperate video clips? I've used the "group" option but there is still a divider that reminds me that the two were seperate. I'd like to be able to combine the two and for it to look as if it was always just one large clip.
4. When I use the scissors to cut a section out of the middle of a clip, the blue marker that shows where I am currently in the video stays in place. So each time I cut out a section, I have to manually drag the blue marker over to the new beginning that was at the end of all the stuff I just cut. Is there a preference to have the blue marker stay with you when you edit instead of it suddenly being far ahead of you in the editing process?
Thanks!

Other than doing Duplicates of your Title, and editing those, as needed, the only other option would be to create the Titles in another program, such as Photoshop, then Save those as PSD's, to be Imported into PrE. The one downside of doing that, is that to edit those PSD "titles" is to Open them in Photoshop - the PrE Titler will not open them for the additional editing.
PrE does not have as much power to organize Assets, such as Titles, as does Premiere Pro, with both Bins and Folders (later versions). I always create a Bin, for my Titles, or even several Bins, for different types of Titles in the Project.
Maybe others will have a workflow, that I have not considered, so we both might learn something.
Good luck,
Hunt

Question about embedded video clips

Hello all,
I'm importing embedded video clips for the first time today
and have run into what I'm sure is commonly understood by everyone
else here. The video clip takes up as many frames as the video, but
if I add frames after that, the clip starts to loop.
What I want is for the clip to play once then remain
displayed with the last frame visible to the end of the scene
timeline. I'm guessing I need to place a script on the clip or
something similar to keep it from looping? Thank you for any
direction on this.
Best regards,
Scott

just place it in a Graphic symbol (which is an option in the
import wizard) or create a new graphic
symbol and drag the video icon from library to it - place
instance of Graphic symbol on stage -
select it and tell it to Play Once in Properties.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
worldly1 wrote:
> Hello all,
>
> I'm importing embedded video clips for the first time
today and have run into
> what I'm sure is commonly understood by everyone else
here. The video clip
> takes up as many frames as the video, but if I add
frames after that, the clip
> starts to loop.
>
> What I want is for the clip to play once then remain
displayed with the last
> frame visible to the end of the scene timeline. I'm
guessing I need to place a
> script on the clip or something similar to keep it from
looping? Thank you for
> any direction on this.
>
> Best regards,
>
> Scott
>

Please help me with this urgent viewing and editing question for a long video clip.

Hi, I have never used this software before and when I imported a 2 hours and 12 minute video clip of my sister's wedding into the system and added it as one sequence into the program it would only allow me to watch and edit the first 2 minutes.
Why is that and how can I rectify this so that I can watch and edit the whole clip?
Also, can such a long video clip be edited by trimming it and creating transitions where I see fit?
Thanks so much for your advice as I am feeling really stuck right now.
Becky

First, the tutorial list in message #3 http://forums.adobe.com/message/2276578 may help
2nd, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
3rd, did you do the below to be sure your project is correct?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Avi video clip import question

Hi all, I am new to iMovie, seeking for help here. I use Vegas video (PC) to edit my home video for long, just bought a copy of iLife 06, it is impressive. I have many video clips in AVI format, when I import them in iMovie, does it actually convert the file to different format? If I capture video in iMovie, what video format would that be? The reason I am asking is because I still want to share the video clips in both Mac and PC platfrom. Thanks in advance!

Assuming all files are in the DV codec, iMovie will not "convert" a clip since that clip is in the DV codec. When iMovie captures, it will capture create a QT file in the DV codec (while Vegas captures an AVI file in the DV codec). Vegas will recognize a QT DV clip just as iMovie recognizes an AVI file DV clip. Beyond that, if you create a .mov file within iMovie and want to play that on a PC, the PC will need the QT player (which is free) in order to veiw the movie.
Mike

IMovie HD Video clip question.

Hi Again,
I have nottest in iMovie HD 5 after I caputer my home movie to my ext. firewire hard drive. When I click to look at it theres a pop box that tells me that it is up dateing clip or some along thoughs lines. It only seem to do it that first time and then when I caputer new clips it will not do it on them. Is there something rong with my computer or iMovie HD.Thanks.

Ok this is very crazy to me. I did a test with my camcorder why can I captuer video to my computer with my Canon min DV. I can then see my clip right then to play it back and it dose not say its updateing the file when I click on it. Also I can just click any were in iMovie hd v5 and it tells me it updating a file. Also when I captuer off my Director's Cut 2 video convertor box whitch I am having meny crazy probloms with but anyway. I am not aboul to click right on the clip with out it saying its udateing the file. I would like to know what is up with this and why dose it only do this to the first video clip I captuer but not to all the other clips that come after its crazy. Am I the only one who seems to have this crazy junk happening. I have done alot of checking on this newsgroup with know luck. Just to see if I could find someone that is having truble like this its crazy. Am I right in think that my video convertor box takes the video from my VCR and then from there makes it then from analog to DV or Digatal or something like that so that it can be put in to my computer. I am wondering why I have to update the VCR captuer movie clip to play them back though its only one I have to do this to. But I do not have to with my DV cam what gives.

How do I sync multiple audio clips to one video clip?

I have video (with stereo audio from a camera mic), and for each take, there are also four additional mono audio tracks that line up with it. It was footage shot outdoors in the city, so I guess the filmmakers just wanted to have as many options for sound mixing as possible given how much background noise there would be. I have tried selecting the video clip and the four audio clips at once and selecting "synchronize clips," but it doesn't work. It spits out a synchronized clip that seems to have converted two of the mono tracks into one stereo track... and then disregarded the remaining two mono tracks. It's a mess. It's likely someone else will fine tune the audio once I'm done cutting the video together... but I'd like to get all the audio tracks properly synced from the start. Thanks for any help you can offer.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

Importing video clips in AVCHD (Lite) into Aperture vs iMovie

I'm trying to figure out which application I should use for importing and storing video clips shot on my Panasonic DMC-ZS7 camera. This camera can shoot in AVCHD (Lite) or in Motion JPEG. I use the AVCHD (Lite) format to shoot the videos with this camera.
The two application options I currently have for importing video clips from this camera are:
a. Aperture 3.5.1 (I'm not using iPhoto since I have Aperture).
b. iMovie 10.0.1 (I'm not using Final Cut Pro)
When I first got this camera, Aperture 3 did not support the AVCHD Lite codec. Back then, iMovie could import video clips shot in AVCHD Lite, but it had to transcode the AVCHD video clips into AIC (Apple Intermediate Codec). Some time later, one of the Aperture 3 updates made it possible to import AVCHD Lite into Aperture (without having to transode into an intermediate codec), so we started importing our video clips shot in AVCHD Lite (together with our photos shot by the same camera) directly into Aperture.
iMovie 10 released in 2013 supports importing video clips shot in AVCHD Lite without having to transode them to AIC for storing these video clips in iMovie. So, now we have a dilemma that we need help with. Which application should we use going forward for importing video clips from this camera?
When I look at the metadata for the imported videos in Aperture, I see that the format of the imported video clips is listed as H.264. However, I can't seem to be able to find any information about the format in which iMovie stores imported videos. I can "Reveal in Finder" a video that I import into iMovie, and I see the size of the file and the .mov extension assigned to the file. With video files, the extension does not always determine the codec of the file, but in my non-expert opinion, the .mov extension is not H.264; I may be totally wrong here, though. What I have noticed, though, is that a video clip imported into iMovie has the file size that is about 10% larger than the same video clip imported into Aperture.
Therefore, I have three questions:
1. What format is a video clip (shot in AVCHD Lite) stored in Aperture 3.5.1 and in iMovie 10.0.1
2. Which format (the one used by Aperture or the one used in iMovie) is better suited for transoding AVCHD videos into? The balance of the quality and file size is the main consideration for us.
3. Which applications would you personally prefer using for importing video clips to and why?
I do want to use some of these video clips to make home videos in the future, utillizing iMovie. However, it seems I can still store the raw footage in Aperture and access this raw footage from iMovie to be able to create an iMovie project and a final home video. One of the concerns is that if we keep importing our video clips into Aperture, the Aperture library could grow beyond the size that Aperture can support and we may end up losing our photos due to the database corruption. Is this a real risk?
Thank you!

I had the same question recently. Go to the right of this box and a little above, into the Search Discussions window. Type in this: Is MPEG2 the answer
You will find my question, and the great answers I got. Follow those directions and you will be all set!

How do I add a video clip after my music?

Its sort of a wierd question but basically to me imovie09 is a bust since i cant really see a real timeline to edit my project. But what im trying to do is after i edited my video and the song i have ends i want to add another clip after the song but without the song playing. Everytime i add a clip it either goes to the top of my project or just adds it to the song. basically what im tryign to ask is, how do i add a clip after a song?

Lurkai wrote:
ohh ok, so what i need to do is detach the audio and it will become that thin green strip at the bottom of the clips is what you are saying?
you don't like tutorials, don't you?
where does the audio come from?
if you ADD audio/music/voice over to a project, there are TWO options.
#1:
you drag it into the (grey) background of your Project - and it becomes a background track with its own 'behaviour': it will try to background the WHOLE Project as much as possible. as long there's audio left, any added video/still will lengthen the audio.
#2:
drag audio ONTO a clip .... it gets connected PLUS it offers the usual options any clip offers; copy/pasting, cutting, fading, effects. here, I added a fade and the last video-clip is audio-less.
safey?

I have a ipod classic which i purchased 2007,can i use the new apple tv dock to play my itunes video clips via my ipod classic to view on my tv

hi there, i have a ipod classic purchased in 2007,with the release of the new Apple TV dock in Australia,my question to anyone out there including apple suooort staff,CAN I USE THIS NEW DEVICE TO VIEW MY VIDEO CLIPS I DOWN LOADED FROM ITUNES ON MY TV INSTEAD OF BUYING THE APPLE COMPONANT CABLES....THANKS EDWARD

You can plug the iPod into the same iTunes library as your iPod Touch and sync whatever content you like to it. There is no limilt to the number of iPads, iPhones, or iPods you can sync with one iTunes library, account, or computer. How you sync one device will not affect the syncing preferences of the other.
B-rock

Question on video clips??

Similar Messages

Maybe you are looking for