Question on what CR 2008 report type to use for a report

Post Author: JohnN
CA Forum: General
Hi all,
I am new to Crystal Reports and have been tasked with using Crystal Reports 2008 to create a report. I have attached an image of what the report needs to look like. The report needs to look like a table, with the 5 left columns being summary info and there can be multiple rows from the 6th column on for each summary row. I have looked through Crystal Reports samples but cannot see anything similar.
Question . Could someone give me some quick general pointers on how this report could be implemented with Crystal Reports 2008?
Thanks in advance for any help,
JohnN
Team
Service Level
Agreement
SLA Target
Overall Success Rate
Total volume
Process
Process Success Rate
Overall Volume completed per Process
Day 1
Day 2
Average Days
New Business
Confirming Requirements
90% complete in 5 days
91%
589
New Business Vet
90%
490
69
18
18
Vet key & transfer (TCP)
88%
99
11
6
6

Post Author: JohnN
CA Forum: General
Thanks sharonmtowler,
I had started to look at the second option you suggested but I cannot see any way of having multiple rows for the one summary row (i.e. the 5 left columns are summary info and there can be multiple rows from the 6th column on for each summary row). I don't see anyway of doing this in a detail section of the report. Up to now I have been familiar with setting up Report Groups then supplying a command to get the detail info. from a database. I haven't seen any examples of having a row with summary info and multiple sub-rows. Is there some other way of selecting data that I am not aware of that will let me get the mutliple sub-rows
Thanks
JohnN

Similar Messages

What are the tables to be used for these reports

hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.

Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps

Question About what Azure Services I should be using for mobile app with website.

Hello,
I am wondering what Azure service would be best for my new application. I need to have an SQL database that I can connect to and modify from both a website and a mobile app preferably WP8 and Android. I was not really understanding whether I would need a
mobile service or normal SQL database. Which should I use or am I completely off track?
Thanks,
Matthias

Mobile Services uses SQL Database, nothing special on that SQL Database, its just like any other "normal" SQL Database.
Mobile Services provides "back-end services" that simplifies accessing SQL Database, Notification services, authentication, etc...
Let's assume you don't use Mobile Services, to use SQL Database, you would need your app (both mobile and web) to connect to the database. In practice, you will not want to expose your SQL database directly, so you'd end-up writing some kind of a "facade"
that your app will access instead of directly connecting to the database.
Instead of writing that "facade", Mobile services provides that for you (you still have to write code though, but less than what you need to write if you're rolling your own).
Both your web app and mobile apps can share the same SQL database (pay attention to the mobile service schema).
To help you decide, ask yourself what other features will your mobile app require? Authentication? Notification? etc... are you prepared to write those on your own or use various libraries instead of one?

What r all the tables used for this report. please reply

hai,
what r all the tables used for this report.
report :
<b>
Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).</b>
thanks in advance

hi Ashok,
Check this out
http://www.allsaplinks.com/tables.html
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh

What are all the tables used for this report:

hi
what are all the tables used for this report:
report:
<b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
thanks in advance

Tables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R

What are the tables used for this Report

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.
9994262112.

hi
good
try with these tables,
MARA
KNA1
thanks
mrutyun^

What data type is used for storing password,

What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
Thank you
Hina

Data type is VARCHAR2:
SQL> desc dba_users;
Name                                      Null?    Type
USERNAME                                  NOT NULL VARCHAR2(30)
USER_ID                                   NOT NULL NUMBER
PASSWORD                                           VARCHAR2(30)
ACCOUNT_STATUS                            NOT NULL VARCHAR2(32)
LOCK_DATE                                          DATE
EXPIRY_DATE                                        DATE
DEFAULT_TABLESPACE                        NOT NULL VARCHAR2(30)
TEMPORARY_TABLESPACE                      NOT NULL VARCHAR2(30)
CREATED                                   NOT NULL DATE
PROFILE                                   NOT NULL VARCHAR2(30)
INITIAL_RSRC_CONSUMER_GROUP                        VARCHAR2(30)
EXTERNAL_NAME                                      VARCHAR2(4000)
PASSWORD_VERSIONS                                  VARCHAR2(8)
EDITIONS_ENABLED                                   VARCHAR2(1)
AUTHENTICATION_TYPE                                VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313.

Currency type option needed for copa report

Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RK

If you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks

What r the tables used for this report.

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.

Hi Ashok,
this is easy to do.
Open Two SAP Screen with same user ID.
Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
Trace on ,Run the report in another screen.
Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
process,End trace process and Display track process.
The SQL trace will give you all the table details which is used in that particular report.
You have not mentioned about the report name so I have suggested this way.
regards,nishant
Please reward if this helps

Standard driver programs,output type ,scripts,smartforms for SD reports

hi experts,
Can any one list all the standard driver programs,output types ,scripts,smartforms for SD reports.
mani

Hi,
Check this out
NACE
You can track the form and the print program used for that form
The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE?
and
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
and also
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
If it helps reward with points..

What message type to use for syndicating data back to R3 from XI

What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.

Hi Rehman,
You are getting error 51 which means "Error: Application document not posted".
This might because of two reasons:
1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
2. You have assigned wrong inbound function module to post the IDoc.
Please check these cases.
Hope this will help you.
Thanks,
Shiv Prashant Dixit

What are type defs used for?

I am learning about type defs and wanted to ping the community to get a feel for what expanse of things they are useful for. Any and all comments are welcome.
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

I found this (from LV Help) enlightening as to the differences between typedefs and strict typedefs:
Type Definitions and Strict Type Definitions
Use type definitions and strict type definitions to link all the instances of a custom control or indicator to a saved custom control or indicator file. You can make changes to all instances of the custom control or indicator by editing only the saved custom control or indicator file, which is valuable if you use the same custom control or indicator in several VIs.
Type Definitions
Type definitions identify the correct data type for each instance of a custom control or indicator. When the data type of a type definition changes, all instances of the type definition automatically update. In other words, the data type of the instances of the type definition change in each VI where the type definition is used. However, because type definitions identify only the data type, only the values that are part of the data type update. For example, on numeric controls, the data range is not part of the data type. Therefore, type definitions for numeric controls do not define the data range for the instances of the type definitions. Also, because the item names in ring controls do not define the data type, changes to ring control item names in a type definition do not change the item names in instances of the type definition. However, if you change the item names in the type definition for an enumerated type control, the instances update because the item names are part of the data type. An instance of a type definition can have its own unique label, description, default value, size, color, or style of control or indicator, such as a knob instead of a slide.
If you change the data type in a type definition, LabVIEW converts the old default value in instances of the type definition to the new data type, if possible. LabVIEW cannot preserve the instance default value if the data type changes to an incompatible type, such as replacing a numeric control or indicator with a string control or indicator. When the data type of a type definition changes to a data type incompatible with the previous type definition, LabVIEW sets the default value of instances to the default value for the new data type. For example, if you change a type definition from a numeric to a string type, LabVIEW replaces any default values associated with the old numeric data type with empty strings.
Strict Type Definitions
A strict type definition forces everything about an instance to be identical to the strict type definition, except the label, description, and default value. As with type definitions, the data type of a strict type definition remains the same everywhere you use the strict type definition. Strict type definitions also define other values, such as range checking on numeric controls and the item names in ring controls. The only VI Server properties available for strict type definitions are those that affect the appearance of the control or indicator, such as Visible, Disabled, Key Focus, Blinking, Position, and Bounds.
You cannot prevent an instance of a strict type definition from automatically updating unless you remove the link between the instance and the strict type definition.
LabVIEW 8.0.1; WinDoze XP
aut viam inveniam aut faciam

What MIME type to use for DNG?

Is there an 'official' MIME type to use for DNG? I've seen image/x-adobe-dng used, also image/tiff, and sometimes image/x-dcraw. I'd like to know so that I can characterize DNGs correctly for format identification software we are writing. I don't believe the MIME type is specified in the DNG spec. Thanks.

I think this is clear
image/x-adobe-dng = DNG
image/tiff = for tiff images. I know that Phase One gives there RAW images .tif at the end but tiff sould be a real image.
image/x-dcraw = for other camera raw files like CRW/CR2 of Canon, NEF of Nikon....
I would suggest to use the "image/x-adobe-dng" for DNG files.

What kind of analysis should i use for these signals?

i'm developing a lie detection system,i have one respiratory sensor and a hand grip heart rate monitor to acuire the physiological signals from the sensors.i have attached a screenshot of the application.the top signal represents the heart beat and bottom one is respiratory signals.my question is that what analysis mwthods should i be using for these signal types?would you please care to help me on this? thank you.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

What is the logical system name used for in R/3?

We have a R/3 server. The production client has a logical system name. What is the logical system name used for?
Tony Tam

Hi Tony
Following Links will help you in understanding the concept
http://benstudycenter.blogspot.com/2008/02/logical-system.html
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
thanks
Bhudev

Question on what CR 2008 report type to use for a report

Similar Messages

Maybe you are looking for