Question on which forum to use

I have a Jakarta POI (for createing XLS files) question. Anyone know which forum is best for asking this type of question?
Thanks

I figured I would ask before someone jumped down my
throat about posting a question in the wrong forum : )Well done, I sometimes quite unintentionally employ the tactic of hoisting by my own petard; it works well for me. :)
Anyway, my question relates to Jakarta POI, although
I am open to other solutions. I am using this API to
create XLS files. Now, I have been asked to find a
way to password protect the files as I create them.
It does not appear that this API has this
functionality. I'm pretty sure this is the case.
If so, does anyone know of a way to password
protect these files programmatically.I'm afraid that I can't help you there, but there is a dedicated POI forum here:
http://www.nabble.com/Jakarta-POI-f298.html

Similar Messages

My question is which better to use every time my iPad until the battery is 0% then charge it to 100% then use it again until it is 0% or i use it until the percentage is low then charge it until it is 70 - 80 % then use it but not let it charge to 100%

My question is which better to use every time my iPad until the battery is 0% then charge it to 100% then use it again until it is 0% or i use it until the percentage is low then charge it until it is 70 - 80 % percentage then use it but not let it charge until it is 100% to reduce the number of circles and increase the life of battery as i read that it must at least one time a month use the device until the battery drain to 0% then charge it again to 100% but i don't understand is it must be one, two, three times a month or properly most of the times to reduce the the number of circles and increase the life of the battery?

wuzradioman,
I was originally on your side in the discussion of batteries, however, after being contradicted by Meg St._Clair and others I took a leap of faith and took their advice with my Apple devices. Much to my chagrin their advice has proven true.
Long story short I have not noticed any differences in my battery life by changing my charging habits to what is convienant over what is more in line with conventional battery myths.

Toast 9 Titanium - not sure which forum to use

Sorry that I did not see a specific forum for Toast 9 Titanium.
I am spanking new to making a custom DVD. What I would like to do is take parts of different DVDs that I have and put them on a blank DVD.
My question is 1) is there a video tutorial and 2) how do I "read" or see the contents of the DVD, to know which "files" I want to transfer to the custom DVD project?
Thanks very much for any help.

Try http://forums.support.roxio.com/

Which forum to use?

I am interested in developing AU plugins for LogicPro. I am new to this. Are there forums focused on Xcode and/or on developing audio applications? Or is there just one big developer forum for everything?
Thank you.

You can view the paid developer forums at https://devforums.apple.com
There is a LogicPro forum which is easily found here on the Discussion home page.

Questions about which codec to use

At my new job, there is a server full of RAW video files that I will need to use in the future. These were all imported with an iMac through iMovie and are in .mov format with ICOD codec. I have found that PCs can't read ICOD codec, and there is no way around that. I just discovered Compressor on this iMac and was thinking that I could change the codec into something a PC can read.
What codec would be the best choice for me? This is all high definition video, and I would like to retain the quality of the originals. File size doesn't matter.

I believe that ICOD is just another descriptor for Apple Intermediate Codec. That's obviously proprietary to APple and is sort of obsolete – used in FCE, for HD material. (I didn't realize it was still used by iMovie.)
Pro Res is a better codec for editing and is virtually lossless. If the PC folks have (or download) the Pro Res QT
Decoder they could play it. But PR files are very, very large.
If you edit these files into something finished in whatever NLE you want to work in, you could always export as AIC and convert in Compressor. I imagine the PC would be perfectly happy playing an h.264 MP4. It should look good and the file sizes will be much more reasonable.
Try a short test to verify.
Good luck.
Russ

Which forum for LenovoEMC / IOmega NAS units?

There seems to be three fora for these NAS devices.
On the index page, this one seems to be only for PX devices but that doesn't show up in the cookie crumbs which say "Lenovo Community > Network Desktop Storage > LenovoEMC Network Desktop Storage"
And some of the messages are clearly about the IX series.
Can we have clear guidlines for which forum to use and some nudging to see that they are followed? Perhaps the fora should be combined.
Solved!
Go to Solution.

Hello HughR
The forums are separated in the same way as in the support page, with the addition of moving rackmount devices to the enterprise forums.
-LenovoEMC: LenovoEMC Network Desktop Storage
current LenovoEMC px desktop units (lifeline v4.x.x)
-Lenovo: Lenovo Network Storage
Current Lenovo ix and ez media desktop units (lifeline v4.x.x)
-Iomega: Iomega Desktop Network Storage
Legacy ix class devices, pre-LifeLine os Storcenter, or other legacy Iomega network hard drive devices.
Iomega branded px devices technically could go here, however the LenovoEMC forums would be best suited. Same for any Iomega ix or ez media device, the Lenovo section would be better suited. ( more of a catch-all section) (lifeline v2.x-3.x)
The Enterprise product section has the following:
-LenovoEMC Rackmount: Lenovo EMC Rackmount Storage
Current LenovoEMC px rackmount devices (lifeline v4.x.x)
-Iomega Rackmount: Iomega Rackmount Storage
Legacy Iomega ix/px or other pre-LifeLine OS rackmount network storage devices. (lifeline v2.x-3.x)
Bottom line:
If you have a current PX device use the LenovoEMC destop/rackmount sections accordingly.
If you have a current IX or EZ Media device, you should use the Lenovo forum section.
If you have a legacy Iomega device the Iomega desktop/rackmount sections should be used
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

My First DVD - Which program to use?

Hi, folks.
I have never used Apple's video editing softwares because I didn't have a Mac with Superdrive. Since I have one now, I'd like to have some fun with it. So, I decided to start playing with my wedding DVD.
The company which shot my party was very good on shootage but horrible on editing. The movie doesn't have chapters, subtitles, credits or even a good menu. So, I'd like to re-edit it adding nice pictures, menus, etc., etc..
My first question is:
Which software to use? iDVD or iMovie? I took a look at iDVD and it has terrific templates I'd love to see on my DVD, but, is iMovie any better?
Second:
How can I extract the movie from my source DVD? I checked it and found the following files inside:
VIDEO_TS.BUP - 12k
VIDEO_TS.IFO - 12k
VIDEO_TS.VOB - 34k
VTS010.BUP - 56k
VTS010.IFO - 56k
VTS011.VOB - 1GB
VTS012.VOB - 1GB
VTS013.VOB - 443MB
And I have no idea what to do with them.
Do I have to use any software to extract the video from the DVD or just copying those files to HD is enough?
I would really appreciate any kind of help.
Cheers.
JP

Just one thing: keep in mind that it is standard practice that wedding photographers and videographers retain the copyright to the video and photos they shoot. They will generally offer to provide you with copyrights to the video and photos for a fee -- if you didn't enter into such a negotiation before, you should contact the original photographer/videographer to obtain those rights and avoid possible legal problems later. It's also common practice that, if you purchase those rights, you will receive the original tapes and photo negatives / digital images as part of the deal.
That said, if you want to re-edit the content from the DVD, you need a tool like Handbrake to convert if from MPEG-2 format (the DVD) to DV (digital video) for editing in iMovie. iDVD is for rencoding the edited DV content back into MPEG-2 for DVD and preparing DVD menus.
The most recent version of iMovie (iMovie 8) left out support for DVD chapters, so if you want to use them, you need to use iMovie HD (6).
One important point is that the MPEG-2 to DV conversion is pretty much lossless (the video quality is the same coming out as going in). However, in re-encoding back to MPEG2 in iDVD, the quality will noticably degrade. This is unfortunate, because the video on the DVD is already substantially degraded from the source material (on DV tapes). Like I had mentioned before, if you've gotten rights to the video, you probably have access to the original tapes -- in which case you want to borrow a DV camcorder to transfer the video from the original tapes and work with the first-generation DV rather than the content on the DVD.

Which forum should I use if I have JSP questions?

Hi, pals!
Which forum should I use if I have JSP questions?
Cheers,
George

http://forum.java.sun.com/forum.jsp?forum=45

I have a question related to patch download using ftp which was working in

Hi,
I have a question related to patch download using ftp which was working in Classic Metalink.
ftp updates.oracle.com allowed to download patches before but now it says the following.
$ ftp updates.oracle.com
Connected to updates.oraclegha.com.
421-*********************** Downtime Notice ************************
421-
421-This service was retired as of November 06, 2009.
421-
421-****************************************************************
421
Is there a way to download patches now using command prompt. I couldn't see category for metalink in forums hence posted here.
Regards,
Nagendra Chillale

Enter the following command where username and password are your My Oracle Support login and password and filename is the patch file name that you copied from the Properties window::
wget http-user=username http-password=password no-check-certificate output-document=filename "http://updates.oracle.com/Orion/Download/download_patch/<filename>"
For example, to download patch 7154429 for Linux where the patch file name is p7154429_10204_Linux-x86.zip, enter:
wget http-user=[email protected] http-password=password no-check-certificate output-document=p7154429_10204_Linux-x86.zip "http://updates.oracle.com/Orion/Download/download_patch/p7154429_10204_Linux-x86.zip"
My Oracle Support FAQ ID 747242.5
Regards,
Nagendra Chillale
Edited by: user12023326 on Dec 16, 2009 11:43 AM

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

My account shows we have photoshop CS1 and CS4, but we've purchased CS 5.5 and CS 6, as well as Lightroom 3, the latter two of which we've been using for more than a year, but it doesn't show up in my account. Have no clue how this forum works, used to b

my account shows we have photoshop CS1 and CS4, but we've purchased CS 5.5 and CS 6, as well as Lightroom 3, the latter two of which we've been using in excess of a year, but they don't show up in my account. Have no clue how this forum works, used to be able to call Adobe! Any idea how we're supposed to talk to Adobe and have our account updated or figure out our serial numbers?

For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT201363 Hello, i can't remember the answers to my security questions. Itunes gives me an option to resend answers to my old email which i don't remember as welll.somehow system doesn't give me my primary email which i usually use..so how can i solve this

Hello, i can't remember the answers to my security questions. Itunes gives me an option to resend answers to my old email which i don't remember as welll.somehow system doesn't give me my primary email which i usually use..so how can i solve this issue?

Hello Arnas333
You would need access to that account in order to reset the questions. If you do not have access to it, then you will need to contact iTunes Store support in order to resolve the issue.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
-Norm G.

Which forum do i select to ask a visual studion question?

hi which forum do i select to ask a visual studion question?

You can click the "Volunteer for Mozilla Support" button on the https://support.mozilla.org page to go to the https://support.mozilla.org/get-involved page.
* https://support.mozilla.org/get-involved/questions

SAP CM25 which profile to use and why and some general questions

Hi there,
I have a few general questions, if you may share your thoughts on this.
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
Thank you

Hello
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
It can be used for both depend upon bottle neck resource whether machine or labour.
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
Better it should be finite planning for planned order also you can use MRP with lead time scheduling.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
It depends upon the data load and selection,
Restrict the number of objects to be displayed, for example, select only a small number of work-centers/orders.
Customize the time profile (transaction OPD2) such that the database read period, the planning period and the evaluation period are as small as possible. As a result, fewer objects are read and displayed.
Refer KBA 2038780 - Tips for performance improvement on Capacity Leveling
If you want to process more orders, check whether a batch planning (planning in the background on transaction CM40) is possible.
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
It depends upon your requirements which transaction to use and which profile. You can customize your own profile also.
Best Regards,
R.Brahmankar

Can I Design a Forum with using web dynpro for java?

Hi All:
Can i design a forum with using web dynpro for java?
I want to design an application like a simple forum which maybe has many replies.So if i use
the UI technology "web dynpro for java", i will to create UI elements dynamically.How can i control this
dynamical UI elements to keep layout ?

Hi,
yes you can do that....
for exaple if you observe SDN...
you can imagine like....
A big Transparent Container(TC)....
Inside that number of other TCs(depending upon the question nd its replies...)....
In side each TC, again around 9 UIElements....
one for menioning what is the question/reply?
other for your description of question/reply...
other for your name,
displaing your fourm point... etc...
So it will be
for(loop till your (Question+No of replies))
Create Transparent Container....
Add Childs to the Container...
Decide your layout....
In case if you want to know how to create UIElements dynamically....
http://help.sap.com/saphelp_nw04/helpdata/en/4f/07cf3dd28b5610e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/dynamic%2bui%2bgeneration
Regards,
Srinivas.
Regards,
Srinivas.

Question on which forum to use

Similar Messages

Maybe you are looking for