Question on WS-CAC-1300W with NEMA-5-20Plug.

WS-CAC-1300W with NEMA-5-20Plug. Bought 2nd hand 6506 with this power at home. Can I just buy this kind of outlet or i have to ask to install a particular circuit? Thanks

You want to run this at your house?
In your house you can cheat a little. In a business you would be required to put in a dedicated circuit with this type of outlet.
First thing to try is to replace the power cord with normal 15amp cord and plug it into a lightly used circuit in your house. As long as you don't have a lot of cards in the switch it does not pull the max power. Even in a fully loaded switch it will only pull the maximum at boot time.
You may have 20amp circuits in your house already. Many newer houses are requierd to have 20amp circuits in the kitchen and garage. The plugs look the same you need to check the breaker panel.
It will be easier to find a power cord than replace a outlet. You could swap out a outlet to one like this but you now take the risk that someone in the future assumes this is a dedicated circuit which the electrical code requires for a outlet like this.
If you are going to run this a lot I would put in a new circuit. It is a faily standard one that larger window airconditioners need.

Similar Messages

  • ASA 5505 VPN with NEM

    Hi!
    Im having trouble setting up two ASA5505 with EzVPN. One is head and one is client. Without NEM everything works fine. With NEM it connects but cant ping anything or use the split tunnel to access Internet. See attached configs.
    With NEM enabled the Head gives the following error:
    No translation group found for icmp src outside:192.168.10.2 dst inside:192.168.1.201 (type 8, code 0)
    Any ideas ?
    The Public IP addressesa and gateway are changed to 9's in the first three parsts of the address.
    Thanks! /Bjorn

    HEllo,
    Add this command to the head end side.
    access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0
    This should fix your issue.
    Rate this post if it helps.
    Cheers,
    Gilbert

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Fico interview questions and Real time tickets with resoving details

    MODERATOR:  Do not post (or request) email address or links to copyrighted or confidential information on these forums.  If you do, the thread will be LOCKED and all points UNASSIGNED.
    hi sap gurus
                    i have done sap-fico iam in job trails. can any body help me    Fico interview questions and Real time tickets with resoving details
    regards
    prasad.v
    Edited by: chinna prasad on Jun 5, 2008 4:10 PM

    Hello Prasad,
    Before attending interviews.....First you need to understand general things like CV writing, projects, sub modules etc., you should be gain knowledge on these concepts then you can move further.
    1. CV 2.Projects 3.your strenths in sap (reading..reading...reading....practice...practice...practice)
    2.you please interact with your friends who is on trails, then you can get more information like interview process, methodology, technical etc.,
    I am sending some real time interview tech questions which will useful for you.
    Questions:
    1.When tickets are raised by end users who will give priority? After resolve the tickets who will close the status?
    2.In real time at a time how many normal periods, special periods, MM periods we can open?
    3.What is client dependant & Independent?
    4.How to transport configuration settings from one client to another client or production client, which tools we can use for transport?
    5.Why we donu2019t assign business area to company code?
    6.What is the difference between General GL A/c, Control A/c, Reconciliation A/c & Offsetting A/c?
    Answers:
    1.The priority is generally decided by the Coordinator on the client side. After tickets are resolved, they will have to be closed by the coordinator on the customer site
    2. In FI as many as you wants. In MM only 2 (current month + previous
    3.Certain tables and customizations made in one client will affect the other clients also - then it is cross client i.e, client dependent. While if the changes made in one client has no impact on the other client - it is said to be client independent
    4.Transports from one server to the other can be made with the help of transport requests. When a configuration is done the system generates a request number. First release the task and then release the request. Use TC-SE10 / SE09, SE09: workbench transport; SE10: customizing transport. But currently no such difference actually exists.
    5.because in case of multiple company codes, same business area can be used across company codes. Business area is cross company code, means it is not confined to one company code thatu2019s why we don't assign BA to any of the company codes. It is client dependant, not company code dependant. We can pass values from one company code to any of the BA in that client.
    6.General GL Account are those used for standard posting like for example Income and Expenses Accounts
    - Control Account are basically used for reconciliation between modules like FI and CO, to ensure that both the modules are in sync.
    - Reconciliation Account are those specific covering ADK (A-Assets, D-Customer, K-Vendor). For example a Customer Master would be mapped to a Bills Receivable Reconciliation Account and any transaction that needs to be posted are done against the customer code.
    - Offsetting Account are used for variety of reasons and few examples are Intercompany Postings, at the time of Implementation when TB and Balance sheet are uploaded would be offsetted against a dummy account.
    All the best.....dont forget and pl assign points if useful and if u have any querries pl revert back
    thanks
    Anil

  • I would like to buy an iPhone for my friend in Iceland.  Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

    I would like to buy an iPhone for my friend in Iceland.  Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

    Bad idea. There are no supported iPhone carriers in Iceland, thus some features may or may not work. Further, there will be no warranty or support for a US purchased iPhone in Iceland...your friend will be on their own. If you still want to go down this road, make sure you purchase an officially unlocked iPhone(GSM model) directly from Apple.

  • Question to the forum  My question really has to do with the replace stuff

    Question to the forum
    My question really has to do with the replace stuff from imovie 09
    Ok when I pick up the stuff from the event library and pull up to the top it does not replace at play head or end or start
    It mainly erases everything that is on there b4 so
    So I am not sure
    I actually also wanted to know what is the difference of just dragging to the end or end
    And all these replacing options like replace at start end or replace alone for that matter ….

    Hello again. Just to let you know I have solved the problem. Backed up my new phone. Then wiped all settings and everything off it to start again. When it relaunches it gives you the option to download from Icloud and you can pick from which back-up date you want to download it from. Picked the one from the day before it got trashed and HEY PRESTO, we have all the pictures and videos back!!!     Iphone 0 - 1 Voodooboy78
    I'm sure people will look at this and be like duhhhhhh but to me it is a VICTORY over technology!!! Peace

  • Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

    dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

    This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
    Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
    I use 1 GB SD card on my A200 without any problems.
    In my opinion you should check notebook by technician.
    Bye and good luck!

  • Good morning. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?

    Good morning (at least here in Portugal)
    My question is that I want to buy the new Iphone 5C, but I want to use it here in Portugal. I was in the store menu looking for it and it appears that I have to stay with a network for two years, if not the price will increase significantly. I want to buy it online because the Iphone will only arrive in Portugal in December and probably it will be more expensive. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?
    Thank you very much for the attention.
    Daniela João.

    The Verizon iPhone 5 is sold as unlocked. You can buy it full retail and use it anywhere you want. However, you won't get LTE in Europe and you won't be eligible for warranty service unless you take the phone back to the U.S. You won't be able to buy one on a contract unless you can pass a U.S. credit check. The minimum monthly cost would be $59.99 plus tax. I assume that all of this information will be true of of the 5C as well.
    Wait and buy the phone in Portuagal.

  • Access certificate from a DoD CAC card with Sun Java 1.4.2 Plug-in

    We are using CAC cards with ActivCard Software. We are using Sun Java JVM 1.4.2 with Internet Explorer. The problem is that Sun Java does not use the certificate in the browser certificate store for HTTPS client authentication.
    The solution from Sun is to export the certificate as a PKCS12 format and add 3 parameters to the Java Plug-in. The parameters are
    -Djavax.net.ssl.keyStore=<client_keystore_file_path>
    -Djavax.net.ssl.keyStorePassword=<password to access the client keystore file>
    -Djavax.net.ssl.keyStoreType=<keystore_type>
    Exporting the certificate from the CAC card is not an option for us.
    This is a big problem for us. Does anyone have any ideas on a way to get the Java Plug-in to access the CAC card without having to export the certificate?

    You could use JVM 1.3.X because it uses SSL from the Internet Explorer, not the JSSE SSL.
    Apart of this, you could see if the implementation of PKCS#11 for the forthcoming J2SDK 1.5 works with your card AND if JSSE can use the PKCS#11 Sun Provider. Download the beta and try it.

  • Question on how networking works with new Macbook Pro

    Hi,
    I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
    I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
    Thanks for your help!

    Hi
    Your MacBook Pro should just work when plugged into an ethernet connection.
    Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
    In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
    So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
    I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
    Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
    If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
    Phil
    Message was edited by: Philip Tyler

  • I forgot to answer questions from what to do with protection

    I forgot to answer questions from what to do with protection

    Please see 'King Penguin's posts in this thread:
    https://discussions.apple.com/thread/4305745

  • Question, the 18 months financing with order total $429 and above. Is it before or after tax?

    Question, the 18 months financing with order total $429 and above. Is it before or after tax?

    Hi Hoan,
    Kst8no1 is spot-on here: your purchase would need to total $429 before sales tax is applied to qualify for 18-month financing. Full details on this particular financing plan can also be found here.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

    I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

    Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
    Hope this helps.
    Ben

  • Question regarding ScrollView and pageControl with multiple XIBs

    Hi,
    I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
    I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
    My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc. Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
    I do hope that this makes sense. I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
    Any help is most appreciated.
    Thanks

    Hi Ziximo, and welcome to the Dev Forums!
    Ziximo wrote:
    I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
    No forgiveness is necessary. You came to the right place.
    I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
    In case it's useful to you, here's a thread which shows how to use the PageControl sample app as the template for what you're doing: [Re: Flipping through views help|http://discussions.apple.com/thread.jspa?messageID=10417960&#10417960].
    My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc.
    The advice you have from thomas-r is right on target, so I'll just try to add to that. Firstly, I think you may be making a diligent attempt at "top-down" design, which is commendable. However there's a dirty little secret that working programmers don't share with managers: Quite often we don't produce the functional specification until we get the code working.
    In other words, thomas-r's reference to Murphy isn't an insult. That's just how software gets designed.
    In general, the decision to make a new class should be based on encapsulation and re-usability. For example when you get a memory warning, you might want to release all of the resources required for a screen that isn't currently visible. If that screen and its controller can be fully regenerated from one nib, this can be an easy task.
    As another example, say the top-level controller is an instance of your ScrollViewController class. If you limit that controller to managing the scroll view and page control, you'll probably have a class you can reuse the next time you need a paging scroll view. But if you pack the functionality for multiple content views into that same controller, the class will only be useful for an identical app.
    .. or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
    So, no, I would definitely not attempt to put all the control in one class. Yes, it's possible, but besides being bad practice, it's awkward to implement. For example, when you make a nib which is owned by a view controller, it's easy to connect that controller's outlets and action methods to controls which are defined in that nib. There are ways to connect controls to an object defined in another nib, but it's much more difficult. It's not a "natural" configuration, and that by itself should give us second thoughts about our design. On the other hand, if we make one giant nib which is owned by the top-level controller, memory management goes out the window. We would need to unload everything in that nib to gracefully handle a memory warning.
    Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes ...
    Yes. This gives us the reusability and encapsulation we want. The only remaining question is: "Do I need a separate controller class with it's own custom xib for each screen?". Well you may not. There could be two or more screens that are so similar (e.g. the same layout and functionality but with a different image) they can each use an instance of the same controller class and share the same xib.
    I usually start with a different controller class and a different xib for each screen. Then, near the end of the project, I'll look at all those controllers and see if two or more are nearly identical. If so, I might get rid of one or more classes, and possibly one or more xibs as well. But I'd almost never assume I can merge two controller classes at the outset. If I did that, I might start adding kludges to the merged class as I found differences between the screens I hadn't seen earlier. When the merged class finally got too complex for anyone to maintain, the job of splitting it up might be nasty.
    I do hope that this makes sense.
    I think that's my line.
    I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
    If you've suceeded in getting the skeleton working--i.e. you're paging through blank screens, each with it's own vanilla controller/xib, without any bugs, I'd say you're more than ready for the question you're asking here. And it's a very good question.
    \- Ray

  • An old question re: "file not compatible with this version of Photoshop"

    Hi All. I'm a new member of forum with an old question.
    Running:
    MAC OSX 10.3.9
    G5
    Dual 1.8 Ghz
    1.5 GB DDR SDRAM
    Norton Autoprotect
    Nortons Firewall
    Antivrus 9.0.4
    Liveupdate 3.0.3
    CS2
    MAC is kept clear of clutter and has plenty of space in all areas. Everything is stored on Xternal HD.
    In recent weeks I have been receiving the above error message when trying to open existing CS2 layered files.
    I have searched forums including these and tried everything which has been suggested: Shut down Nortons. Worked only from HD. No  networks. Tried opening with PS 7 in Classic. IR. Illustrator. Graphic Convertor. Changed to .tif, .tiff.
    Opening files with CS is one thing I have not tried, I have not been able to find a version of 8 anywhere to buy or download.
    I have not had any success recovering layered files, it seems that once a file has corrupted in this way there is little or no chance of recovery.
    Having rebuilt many complex files from scratch I am naturally concerned I will have the same trouble with those. To try and avoid problems my latest files are made up of simple CMYK photographic images in multiple layers - no text, no smart layers, no groups.
    But a simple file made yesterday gave me same error message today.
    So today I have started saving many versions of the same file, an RGB version (so I can possible open in IR), a different name, a version as a tif, a psd, I'm keeping a version on HD which i am working on, and numerous other versions on a LACIE Xternal HD.
    Does anyone have any idea at which point in the process the file actually corrupts? Is it during saving or when sitting on HD, or is it during the opening process? Or is while working on the file?
    Some discussions suggest that if you are able to  actually open a file, a corrupt layer is found and deleted and this resolves the problem.
    If there are a number of saved versions of same file, is it likely that they will all be corrupt or might some be ok?
    I am considering upgrading to a new, more powerful MAC and a later version of PS. Does the same error crop up on these later versions? Most of the forum discussions go back a couple of years so does that mean some of these issues have been resolved in recent months?
    I imagine that it may be the opposite, ie, the more complex the programme becomes and the more virus protection etc we put on our MACS the more likely there will be problems.
    A lot of questions (and line spacing!), for which I apologise, but any thoughts or up to date comments would be very welcome.
    Thanks
    Paul

    i havent had nortons running for sometime to try and avoid this ps
    problem and although i cant really be sure there dont appear to be have
    been any virus problems.
    except of course the ps error. which is occurring with or without
    nortons turned on. i may uninstall it and see if that helps.
    bearing in mind that i am not working over networks do you think this
    issue is a ps bug pure and simple or as a result of some combo of other
    programme such as nortons affecting ps. in other words would a mac only
    running ps still encounter the same errors?

Maybe you are looking for