Question re connecting HP 2.1 Compact Speaker System

Instructions indicate to plug speakers into the headphone jack. Why not the speaker jack? What's the difference?

Can I just say that I have had it with HP? I emailed them 3 times in 24 hours about this and never did get my "automated response within 1 hour." I just bought these speakers last month! If this is the level of CS one gets with a product that's under warranty, I can only imagine the apathy if the product is out of warranty.
I emailed and posted on a forum about 2 months ago about my inability to scan with my all-in-one despite the fact that all system requirements were met and I uninstalled/reinstalled HP software 4 different times. Never even received an acknowledgement. However, I receive emails from HP almost every day wanting me to buy more of their stuff. HA! Fat freakin' chance. Next time, my money will go somewhere else.

Similar Messages

  • Connecting Inspire 6.1 speaker system to Television

    Hi,
    I am having creative inspire 6.1 6600 speker system connected to my computer and its working perfectly for me.Recently i bought a television LG 29FD55VE. I am planning to connect the speaker system to this Television.How do i do that?
    There are two ports(AV2) in the television from which i am able to hear the sound if i connect the single speaker directly to that port.
    One more question i have is does creative speker systems have inbuilt amplifiers?
    Thanks in advance
    Rudra

    Hi Tseran6600,
    Before you do that, please check if the main board supports 6.1 speakers. It would also be advisable to get in touch with the computer vendor for assistance because they have information about your system.

  • My iPad will no longer connect to my Sony wireless speaker after downloading the latest IOS software. It worked perfectly before. I have reset and reinstalled the speaker through NS setup but still no joy. Any advice would be most welcome.

    My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.

    Hi,
    When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
    So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
    You may try the steps below as of now and check the results.
    We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
    Once it is docked try the steps below:-
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    Open the above link; and then perform the Factory Reset as shown in Solution Two.
    Once completed try connecting to Wireless and check the results.
    though I am an HP employee, I am speaking for myself and not for HP.

  • My ipod touch won't connect when plugged into Bose speaker

    Whenever I plug my iPod touch into my Bose speaker system, nothing happens. It doesn't say that there is an error or anything. It starts charging just fine but it won't play when it's plugged in.
    I know it's not an issue with the iPod's abililty to play music because headphones and the built in speaker work just fine. Other iPods connect fine to that speaker, just not this one. I'm just not sure why it won't connect to the speaker.

    - Does Bose say it is compatble with your 4G iPod and iOS 6.1.6? Sometimes an iOS update will break compatibility
    - Did it work before the iOS update?
    - Have you went to Bose's support site/contacted them?
    Trey:
    - Resetting the Bose unit
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

    I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

    Where exactly did you buy this phone?
    Have you tried contacting your phone carrier to activate the phone?
    Do you have a sim card?

  • Need help connecting new HDTV to an old 5.1 speaker system

    I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
    My new TV only has two options for audio out:
    1. Optical/TOSLINK
    2. 3.5 mm jack (labeled "headphones")
    My speaker system has three options for input:
    1. SPDIF (a single RCA connector)
    2. 9-pin DIN
    3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
    The manual for the speaker system is here:
    http://download.cambridgesoundworks....s/DTT2500D.pdf
    How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
    If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
    Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
    Thank you for your help!

    I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
    My new TV only has two options for audio out:
    1. Optical/TOSLINK
    2. 3.5 mm jack (labeled "headphones")
    My speaker system has three options for input:
    1. SPDIF (a single RCA connector)
    2. 9-pin DIN
    3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
    The manual for the speaker system is here:
    http://download.cambridgesoundworks....s/DTT2500D.pdf
    How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
    If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
    Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
    Thank you for your help!

  • When trying to connect to Airplay speakers I get error message "The  network connection timed out" although some sort of connection is made as the speaker is turned on.  Same thing with Apple TV.  Is the distance from my speaker/ TV the problem?

    When trying to connect from iTunes to Airplay speakers I get error message “The  network connection timed out” although some sort of connection is made as the speaker is turned on.  Same thing with Apple TV.  Is the distance between my PC and the speaker or the AppleTV the problem?

    Hi whitwick,
    If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

    My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

    Hi there tomcrud,
    You may find the information in the article below helpful.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
    -Griff W. 

  • HT5517 how do I connect my bowers & wilkins airplay speaker to my apple tv?

    how do I connect my bowers & wilkins airplay speaker to my apple tv?

    A cable typically works best.

  • HT1665 I have my Iphone 4S connected to an I home speaker.  It is charging through the speaker but I can't get sound.  Help

    I have my IPhone 4s connected plugged into an IHome speaker.  It is charging but I can't get sound out of it.  Help please?

    Yes, connect your iPhone to your computer, click onthe name of your iPhone then click on the apps tab in iTunes.

  • Problem connecting 7.1 speaker system to iMac

    I purchased creative 7.1 speaker system yesterday (Model No: Inspire:T7900). The package contains a cable to connect iMac and woofer system. The cable has 4 pins to one end and 3 pin to other end. According to the manual, I connected the 4 pins to woofer system with the matching colors. Now the problem is how to connect the other 3 pin end to iMac. iMac does have only one analog out, if I connect any one of the plug, only 2 set of speakers are giving the sound and the output switches from speaker to speaker everytime I change the pin. Is there a way to connect all the 3 pins to mac so that all the 7 speakers will become functional. Please help me... I'm very much worried :(:(

    I'm baffled at how you got it to work. I'd be humored to know what kind of loops you must have jumped through to get it going. Humored... and very much interested in the hack.
    I brought one home from a Microcenter today for my PPC Mac Mini (10.5.2) particularly.
    I've tinkered with it all day but it just is not producing any sound.
    The manual instructions do not lead to results.
    It does show up as a device by profiler. Alas Audio MIDI Setup is refusing to recognize the FireWave.
    So I'm out $100 and am looking at another trip back to return it... unless it CAN really work.
    I've emailed Griffin.
    Doesn't work on a 10.5.1 Mac Pro either.
    I cannot find ANY devices that will do hardware decoding via firewire /or/ usb that are supported by 10.5.2 that aren't total overkill for what I'm using it for. This seemed like a perfect solution, but I'm really dissatisfied that it didn't work out of the box and with the lack of Griffin's support.
    So please if you can help me figure this out I'd really be grateful.

  • Questions: cannot connect via wireless laptop (router WR...

    Questions:
    cannot connect via wireless laptop (router WRK54G)
    cannot secure my network using WEP

    from the wired computer , access the router using http://192.168.1.1 . the default password is admin
    on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
    go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
    under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

  • How to connect Asus mother board P5B sound card with Creative Inspire 5.1 5200 speaker system?

    Hi, I am not sure how to connect them, as I find that there is no sound from centre speaker, please help me, thanks?

    mg,
    Have you check through your motherboard manual for the proper setup of your onboard audio with 5.1 speaker system?
    Jason

  • Connecting a Logitech speaker system to my laptop

    I recently aquired the above speaker system & wish to connect to my laptop. The only socket available is the earphones socket - anybody any experience of this?

    And where is the problem?
    Maybe you need some adapter?
    By the way: which Logitech speaker system do you want to use?

  • D200 Creative Wireless/Bluetooth Speaker system question?

    Is the iPhone 4S and iPhone 5 compatible with the D200 Creative Wireless/Bluetooth Speaker system?  I understand it says, "all other bluetooth enabled devices".  Just want to make sure...thanks.

    hi Adtrix,
    Can you try making sure that the bluetooth driver from Lenovo support site is installed,
       If your system is running Windows 8, Check the Lenovo Energy Management 7 version is installed. If not
    uninstall the Lenovo Energy Management from Control Panel / Programs and try donwloading this.
    Lenovo Energy Management Software 7.0
    cagt26ww.exe
    21.2MB
    After installation
    try hitting Fn+F5 and check the if bluetooth radio status is "ON'
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for