Question re error mesg (timed out network conn) ?

Hello, I have used itunes for a while but have encountered a prob today. when trying to redeem itunes card...i get msg "timed out network conn,,,,etc" I have reinstalled itunes and checked settings as i know how...any suggestions?

i've had more than one experience with this problem happening. every christmas millions of kids are getting new ipods and/or itunes gift cards. now, i stupidly attempt to redeem my gift card but i anticipated that it wouldn't work. the farthest i've gotten is to the redeem page but once i try, it just gives me the error sign. so it'll probably work after you waste hours and hours trying to get it to work, but don't bother. try later tonight or tomorrow when there probably won't be so many people attempting to buy/redeem music.

Similar Messages

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

Disk Erase failed with the error- Operation timed out

I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
Anyone knows how to solve this question would be nice.
Thanks

Well give this a try:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
And, try this for the software update issue:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

ERROR:Channel Timed Out

I have a channel on my desktop, which connects to a different webserver (it's not an url scraper channel, it's a custom channel).
As this other webserver has a very heavy load, at times, it can take several minutes before a response is returned.
Although this is a temporary situation, it showed a nasty side-effect for my portal.
It seems that when one of the channels in a container times out, the ENTIRE CONTAINER, including ALL OTHER CHANNELS on it, will no longer be displayed. Instead, the error "ERROR: Channel Timed Out" is displayed.
I could have accepted that only the offending channel is not displayed, but all other channels on that same container as well ???
Anyone else noticed this problem, and has found a way around it?
(B.t.w.: It's very easily reproduced by creating a provider with a getcontent function, that never returns).
Also, I find that it takes quite a long time, until the desktop (with the error) finally gets on my screen. Can the timeout values be set somewhere?
Thank!
Michel.

Hi Michel,
I have seen this behaviour too! I think what's happening is that the busy server is giving an initial acknowledgement of the request, and the portal is then left waiting for a full response. Since the portal can't render the desktop until all portlets report in, you end up waiting.
I worked around this problem by a setting a sane timeout for the offending portlet (i.e. 10 seconds). That way, even if the content never returns, the portlet will end, reporting a timeout error for that portlet, not the entire desktop. You can add the timeout setting in the display profile if you don't have a entry for it on the admin console.
I hope this is helpful!
Erez.

SLD server exception: IO error: Read timed out

Hi,
I have deployed the components for NWDI and after that when i am creating the Domain,I am doing update CMS data for creating a Track. I am getting the following error:
SLD server exception: IO error: Read timed out
Can any one help on this.
Thanks
Ravi.S

Hi,
My SLD is a PI 7.0 system and my NWDI is configured on a standalone Java system.
I have done the SLDDataSupplier check, and it connects fine to the SLD.
Also on my http://<hostname>:<port>/devinf/main in the NWDI system, the SLD link points to the right SLD and im able to connect.
Still at the CMS update stage it gives the error -
SLD (URL http://<hostname>:<port>/) server exception: IO error: Read timed out

'408' error server timed out because of added software?

i get a '408' error--server timed out when i try to download from iTunes--this is straight after installing legit rosetta stone software--a windows site mentions this as a possible cause--and the timing points to it--other songs downloaded--but pretty sure it stopped after the software finally got properly installed--any ideas? Thanks.

You are welcome.
There is a contact link if you want to try it.
iTunes

Cisco Prime and WLC packet capture error - Request Timed Out

Hello,
We have a Cisco Prime installation (2.2.0) and a WLC (Cisco 5508)
I’ve been trying to test the wireless packet capture function, but have now run into problems, a quick rundown of my actions so far:
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to the PI, the capture worked fine
Could not find any way to delete the packet capture
Selected a wireless access point in Prime and clicked ‘Packet Capture’
Did a packet capture saving to an FTP server, the capture worked fine
The 1st capture had finished (10 minute capture) before testing the second
The 2nd capture has also finished and saved the files to the FTP server as specified
Now though I cannot capture from any access point as when I click ‘Packet Capture’ I get the error:
“Request Timed out. Error in getting data from server.”
The error is ‘instant’ as in no delay indicating something actually timing out.
So the 2 problems I have are:
How do I fix the ‘request timed out’ error above
How do I delete old packet captures from the PI
I hope someone can help as I can’t find any info on either of the problems.
Cheers
Adrian

I think I've solved (2) by deleting the files from the FTP directory on the prime box through SSH.
So I'm now just stuck on the timed out error.

Retrieved file is blank. Also get an error message timing out.

Use Dreamweaver CS3. Retrieved file is blank. Tried passive, nothing happened. also got error message timing out. My web master can connect with the website with his computer. He tried to fix mine but can't figure it out why the file is blank.

PHP files are code view only. To work with PHP files locally, you must install a local testing server on your computer and define it in your DW Site Definition.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Building your first dynamic website – Part 1: Setting up your site and database connection
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.

Google Play Store error: "Connection Timed Out - Retry" Xperia E1

Hi
I have an Xperia E1 D2005, running kit-kat 4.4.2, 20.1.A.2.19 version, and few days ago I have encountered a strange issue, whenever I try to access Google Play Store app using 3G, it display a waiting sign until the connection timed out errors occurs. However if I use WIFI connection it will connect normally, and other Google services like youtube hangouts) worked fine.
I have trying severals methods to fix it:
- Check the date and time.
- Clear cache and data for Play Store Google Play Services Google Framework).
- Change or relogin Google acount.
- Uninstall Goggle Play Store update.
- Check my APN parametre (proxy/port, not set).
I tried even to repair my phone with sony PC companion, but the problem persists. I only half-solved the problem by using a VPN app (SuperVPN) that allows me to connect normally to the play store
So any ideas how to fix this problem?
Thank you

Check this out https://talk.sonymobile.com/t5/Xperia-L/Google-Play-Store-error-Connection-Timed-Out-Retry/td-p/967307

HT2186 I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

When I try to download an app I am asked to give additional security questions, but I am timed out every time. If I press the "not now" option the app download resets. At the moment I can't download any apps because of this.

when I try to download an app I am asked to give additional security questions, but I am timed out every time. If I press the "not now" option , the app download resets. At the moment I can't download any apps because of this.

If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.

Sender communication channel stopped after error "Connection Timed Out"

Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio Boni

HI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio

Error 3265/timing out!

I am trying to get my and my wifes ipods updated to the latest 4.3 software, it will download the update but during or just as it is finishing and processing the file it errors out with error code 3265 and tells me it timed out even though I am still connected to the internet, its has done this all week and we have tried to update at least 14 times already. We re installed Itunes but still no prevail. Any suggestions would be greatly appreciated!

Ok, this is ridiculous.
It's errored again.
Apparently the network is once again timing out.
This is after it was working perfectly earlier, with the ability to listen (through preview), download and subscribe all working successfully.
Now, a few hours later, it's down again.
Even weirder, subscribing gives 2 separate podcasts, both labelled "Ben and Ham Soup", is this an issue? I can't explain this well enough without images, so here it is:
http://imgur.com/a/fXO6Y
All 3 images are listed there, showing the 2 albums in the "Podcast" page of iTunes.
Inside, One has 2 'podcasts', the correct one below with the first 2 episodes.
The other mimics the first, but without the 2 episodes, just the other.. shell, for lack of a better term.
Hopefully that sheds some more light on the issue and someone can help!
Thanks

Question re error mesg (timed out network conn) ?

Similar Messages

Maybe you are looking for