Question re: ifIndex in G8264 switch

In VitalNet I see resources ending with things like this:
ieee8023adLag_258
The number at the end corresponding to the ifIndex column.
How can I tell which switch ports this corresponds to?

There's just no way this can happen if the two document profiles are really and truly the same. If, on the other hand, the profiles are not the same, this is normal and expected. The numbers will be different for the same color (and inverse).
Check again. Click the little arrow at the bottom of the document frame:
Also make sure that you have Color Management Policies set to "Preserve Embedded Profiles" (which is also the default setting). Any other setting is an unholy mess waiting to happen, unless you really know what you're doing.

Similar Messages

Question re: "Alias" in Lenovo G8264 switch

Doing a "sh int status" or "sh int inf" displays a column called "Alias".
How do you change a port Alias??

There's just no way this can happen if the two document profiles are really and truly the same. If, on the other hand, the profiles are not the same, this is normal and expected. The numbers will be different for the same color (and inverse).
Check again. Click the little arrow at the bottom of the document frame:
Also make sure that you have Color Management Policies set to "Preserve Embedded Profiles" (which is also the default setting). Any other setting is an unholy mess waiting to happen, unless you really know what you're doing.

Question about HP 2311xi - auto-switch source and delay wakeup from sleep

I recently purchased this monitor and noticed that when it wakes from sleep it will take about 5-10 seconds for it to wake whereas other monitors I've owned they have gone on immediately. I was just wondering if this is how this monitor is or if I have an issue with it.
Secondly, how is the auto-switch source suppose to work? I have my PC set to DVI and I have the default source set to my 360 through the HDMI connection. I would assume that when the 360 goes on it would go to the default source and switch over to the hdmi connection. However, my monitor does nothing. What does the auto-switch source actually do or is mine just defective?
Thanks in advance for any help on this monitor.
This question was solved.
View Solution.

Auto-switch source only works if there is no signal as it detects the port with a signal and auto switches to that port. However, the monitor has no way of knowing exactly which port the user wants when two signals are present.
Default port setting is what the monitor will look for first when being turned on and doesn't necessarily give that port override capabilities.
Taking 5-10 seconds can be normal. My third-party monitor at home generally takes about 5 seconds before displaying a signal, but this may have more to do with the HDMI connection (I haven't tested this with the VGA port). I don't believe this is a cause for concern.
Let me know if I answered your questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Basic question about a level 2 switch when adding an IPv4 Address

Wow, you are all awesome!!!

I am studying for the Network Plus exam and I have a lab that is showing me how to run simple commands on a switch. In the lab, it has me go to the switch, enter enable mode, then configure the switch. It then has me enter an IP address and Subnet. What I would like to know is what is the IP address configured for? Is that the PC's IP address and Subnet? Sorry if the question is remedial, but I really would like to know what the switches IP and Subnet correspond to.
This topic first appeared in the Spiceworks Community

Comments and questions from a new Entourage switcher

When Leopard came out, I decided to take the plunge and move from 7 years of Entourage-ing over to the whole Mail/Address Book/iCal/.mac combo.
It's been a challenge, and one I'm glad I'm making. I really see the future lies here, especially with all the great GTD tools (like OmniFocus) that are so well integrated into these Mac apps.
I have a bunch of things that I'd like to ask or comment on, that I've collected since the switch. I hope these don't sound like whining. More, it's really to stimulate conversation in these areas to find out if anyone has found workarounds, add-on utilities, or even if I'm not doing something right.
*1. Checking If They're Already In Address Book.* If I get an email from someone, I like to know if they're already in my Address Book. In Entourage, you'd right-click, select "Add to Address Book" and if they were already in there, a window would pop up, saying, "This already exists, would you like to add to it, or just open the contact". In Mail, there's no such checking, so clicking on "Add to Address Book" can end up duplicating and triplicating what's already there. In other words, I'm looking for a quick way to open up that person's contact info.
Oddly enough, sometimes a right-click on someone's email address, who is already in ones Address Book, will bring up an "Open in Address Book." However, it's extremely inconsistent. My own brother's emails don't work like that. But odd companies, whom I rarely get email from, will show it.
*3. No Categories.* This is the biggest missing piece for me. If I get an email from someone that treats me with familiarity, but I don't recognize them, there's no way to go into my address book and tell what relationship I have with that contact. Client? Acquaintance? Purchaser? Relative I only met once? This is because there seems to be no way to attach a Category to each contact. Once you have over 2000 contacts, it becomes difficult to remember what each person or company is there for (we have over 5200). Which product did they purchase? Or are they a vendor. Someone I met at a party? Ex girlfriend? There is the Mail Group function, but those act more like Smart folders and aren't attached to the actual contact, so when viewing the All Contacts, there's no way of telling who's who. Even if there were simply a way to color each contact, those colors could act as a category, and one could sort by them. This is my major concern right now with Mail over Entourage. Here's hoping someone creates a utility that does just this!
*4. No Easy Way to Copy Entire Address.* Every hour, we are copying addresses and pasting them into a customized DYMO label (that has our return address and company logo on it). There doesn't seem to be any way to grab the entire mailing address in one Copy. You can highlight/copy the address, street and zip, and paste that into, for instance, a Dymo label, but you have to go back and grab the name separately. The Print function has some very interesting ways to print (including to a plain default Dymo label), but since we have customized labels, we just need to copy the address ourselves.
*5. Search Function Blandness*. The search function could use more refinement. If you search for "Comcast," you logically get all of the contacts that have "comcast.com" in their email address (Further, if the word happens to be in the Notes field, it'll bring those up as well). But there should be a way where it gives precedent to the actual Comcast company contact—which the word "Comcast" in the company field—instead of being forced to scroll through hundreds of contacts to find the actual one I'm looking for.
*6. Auto Name Fill To Slow.* When entering names in an email name field, you can't go very fast, because Mail takes a couple of seconds or so to recognize the name you're typing. For instance, if I'm sending an email to Mark, and type Mar, Mail autofills the rest for "Mark Smith" but the spinning thingie is still spinning, and if I don't wait that extra second, and hit tab or Return, Mail just puts in an empty "Mar" without any email address. I have to wait until the spinning thingie stops before hitting tab or return. When entering 5 or 10 email addresses, this is a hassle. Often I find that even after the spinning thingie stops, and Mail looks like it has autofilled, if I click Tab or Return, the address often still didn't fill correctly. It only stopped at the 3 or 4 letters that I'd typed in. If I didn't catch the error, I think I've sent it, only to get an error message later on.
*7. iCal Alarm Window.* They forgot the lower right corner resize thing in the iCal Reminder window! And regardless of the number of alarms (I often have 20 or more), the green button is always grayed out. So if you have 20 or 30 iCal reminders, you can only view them one at a time in that small window, and have to use the up and down arrows. I'd like to be able to drag this window down so I can view all 20 at a time.
*8. Limited iChat Alarm Window Delay options.* If you want to delay (called "repeat" in iCal lingo) any to-do in the iCal Alarm window, you have options for 1 minute, 5, 15, and 30 minutes, 1 and 2 hours, 1 day and 1 week. It'd be great to if a hack were developed that allowed for other useful delays, such as "tomorrow morning" (so one can see everything all at once first thing in the morning), 2 days, 3 days, and 2 weeks. A "4 hours" would be handy as well, since that's like saying "bug me this afternoon."
Again, don't misinterpret this as whining, I'm digging the move and am totally committed to it. I just want to see if anyone has wondered about any of these, too, and has discovered a workaround (or a pref I'm not seeing!) or knows of a 3rd-party utility (or downright hack).
Thanks for any ideas on these.
Edit: corrected some misspellings...

Re: Categories - I too miss that and I've 'solved' it two different ways. First, I set up groups which helps me find someone who I know within a certain context. ie, I know I'm looking for John who is a student. I look in the student group for all the Johns. Second, I use the note entry to jot down things I want to remember about the person.

Basic Questions from Prospective Lion Server Switcher

I have five servers I am running right now using Windows 2003 Server and various 3rd party packages.     Several years ago I became a Mac fan, moved all of my client based stuff to Mac, and now want to start moving my server based equipment to the OSX platform.
I stopped by my local Apple Store, and they had a version of OSX Lion Server running on a MacMini, but couldn't seem to answer the most basic of questions because as their business people stated "We are not Server Certified" ... they recommended I talk to an outside consultant to get these basic questions answered which seems a little extreme.
So I'm hoping the group can help.
(1) I read through most of the Lion Server Advanced Administrative manual.    Lion server appears from the manual to do most of what I need.   However, when I tried doing some of the functions in the manual on the demo Lion Server at the Apple Store, many of the functions I wanted to do did not seemed to either be installed, or their were buttons missing in the Server App.     I do not know if this was a permission level problem, because the account I setup for myself had administrative rights.
(2) In the mail app, it only appeared you could setup one mail domain.    It appeared you could setup virtual domains and users through the user app, but not through the mail domain itself?
(3) I could not find any where to enable DNS services.    The manual seems pretty straight forward in turning on DNS, but the Lion Server I saw had no DNS services running, or any way to enable them?
(4) Same for mailman listserv type function ... manual seems to be straight forward on enabling under the mail server, but again, no signs of the settings or enabling under the mail service.
(5) Under the mail app, didn't find any way to setup alternative SMTP ports ( I allow now Port 26 besides the standard Port 25 and SSL ports for my users.) ... I find port 26 gets past most firewalls at hotels etc.      Didn't see any way to control SMTP authentification too.
(6) Under the Lion Server tech description, it talk about a built in web editor, saw nothing of the kind.
So did the apple store have a limited install or am I missing something that the lion server manual does not match the capabilities of lion server.
Love to get a straight answer before purchasing hardware to replace 5 present machines.
Thank you.
David

Thanks for quick response.   Indeed, in hindsight, it appears that they had only installed the Server App, but not the Server Admin tools.
Unfortunately, I am not a system admin, but I played one on TV <grin>
All kidding aside ... I'm willing to learn, but would need most of the basics controlled through the GUI ... and then feel comfortable reading up and editting configuration files and running commands from the Terminal.
On this line, is there good documentation of this, or is this something that you know because you are familiar with Unix?    ie something like the alternate port issue ... is this something in the GUI, or something I would have to edit via Terminal?
Just trying to make an informed decision before jumping platforms.
Thanks
David

Questions before I make the switch to a MBA

I've own'd a Macbook 2.4 Ghz with 2 gig memory now for about 8 months. I'm happy with the machine but always wanted the MBA for the portability. I travel everyday and would love a MBA but was not ready to jump in on the first rev.
I use my MB for webmail, photos, converting HD video and some light editing. My question is the new 1.8G/128SSB able to handle video processing as good or better than this Macbook? I would think the SSD would be better and the graphics chip is probably alot better then this x3100 model.
Looking for any advice you MBA owners have! Thanks.

I went from a 2.4/7200 MBP to this 1.86/SSD. I still have my Pro and I am in my 2 week "trial period" with the Air. The Air actually feels quite a bit faster than my Pro overall due to the SSD. I'm sure it's not as fast for encoding video, etc., but it is more than adequate for my needs.
This biggest difference I see is battery life and charging time. I definitely seem to get more life out of the Pro, and the recharge time is ridiculous at times (5-8hrs!!?). I'm hoping this clears up after some more calibration and cycling. I hear that the new Pros and Macbooks have the same issue though.
Overall, it's a beautiful machine that appeals to my minimalist nature. If the regular Macbooks had a screen this nice I might have gone that route because of the ability to upgrade, etc. I may actually still do that if this battery issue doesn't improve....

Quick easy question about cisco 2948 l3 switches..

Hi Everyone,
I was wondering is there a battery backup in the cisco 2948 L3 switches. I have googled for this and checked the manuals and i cannot find anything. I only ask this because everytime one of our two 2948's are rebooted they lose their configs and have to be manually reconfigured. So I am hoping it is a battery problem rather then the NV ram has gone bad (if that is possible)
Thanks,
Adam

Nope, no battery. If the behavior is consistent every reboot, you might have a defective NVRAM, this is assuming you are saving the config, this is a 2948G-L3, so it must be saved, if it's a 2948G, then it's a switch and running CatOS and therefore any configuration changes gets saved in the NVRAM as soon as you press the enter key after a "set" commmand.
Please rate all posts.

Two questions when upgrade SG500X-24P switch Firmware

Below is my switch detail information,
System Description: 24-Port Gigabit PoE with 4-Port 10-Gigabit Stackable Managed Switch
Firmware Version (Active Image): 1.2.0.81
Firmware Version (Non-active): 1.2.9.44
Boot Version: 1.2.0.12
Q1: upgrade FW to sx500_fw-12944.ros and active image-2 then reboot switch.
      after switch reboot, GUI still show Active Image is 1.2.0.81.
Q2. when try to upgrade FW:Sx500_FW_1.3.0.62.ros. GUI show FW format error.
I have try to upgrade from HTTP/HTTPS and TFTP, but got same result.
thanks.

Hello Joshua Roeder,
of course, I click Apply before rebooting.
and the firmware info after rebooting is:
             Firmware Version (Active Image): 1.2.0.81
             Firmware Version (Non-active): 1.2.9.44
one thing i don't understand is i have to set my default password again when login to GUI after reboot.
error messgae for my Q2:
Upgrade/Backup Firmware/Language
Bytes Transferred:
0
Status:
Copy failed
Error Message:
Copy: Illegal software format
thanks again.

HT2731 Sir I want to ask a question my iPad is showing switch to Saudi Arabia and before my account is in USA so what is a reason can u send me any information

Dear sir,
I send a message to apple customer to help me about this problem in my iPad

http://www.apple.com/support/itunes/contact/

Questions on Metro Ethernet (ME)switches

HI,
Need some help with the following:
(1) does ME3400 support ipsla (previously known as SAA) ?
(2) Are there QoS MIBs in ME3400 that allows us to monitor the bandwidth per class just like what we usually did for router ?
Rgds
Eng Wee

12.2(35)SE, 12.2(25)SEG1 & SEG , 12.2(25)EX1 & EX These release for the ME3400 support Class-Based-QOS-MIB.
IP SLA is supported in ME3400, but has a partial support only. Please refer to this release note below for more info.
http://www.cisco.com/en/US/products/ps6580/prod_release_note09186a00806700ee.html#wp833196
HTH-Cheers,
Swaroop

ISE question on desktop switches, MAC replace, MAC move

Hi all,
few questions on authenticator NAD (example: switch) to support on these items
01. desktop switches, how we can enable other switch to plug in and extend the network? What is this deal with Network Edge Access Topology (NEAT)?
what must configure on ISE policy node, authenticator switch and the new plug in extended switch?
02. How and what need to do on authenticator switch and ISE on these:
a. MAC Replace
b. MAC Move
Thanks
Noel

mac replace -
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/dot1x.html#wp1143287
mac move -
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/sw8021x.html#wp1481527
Before you consider NEAT -
If you are using a dumb switch you can enable multi-auth so that all mac addresses forwarded up to the switch port are authenticated, dynamic vlan assignment is not a scalable solution for this solution since you can only assign the first authenticated mac address to the dynamic vlan, others either inherit the vlan or error disable the port (I can't recall), but it is documented.
NEAT is only supported on a few access or distribution switches, so make sure you follow the release notes to see if you platform supports this design.
ISE policy node - must have the av-pair of device-traffic-class=switch to be configured to dynamically convert the authenticator's port over to a trunk port. Your design depends on either MAB or dot1x to succeed for this av-pair to be triggered in your authorization policy...i.e. profiled endpoint group or a user group with the credentials mapped to a user group or both.
Authenticator switch - must allow radius authentication, authorization, and for proper license tracking an accounting.
Client switch - credentials (see reference guides and config examples), forward traffic to trigger mab if dot1x is not part of this solution.
Thanks,
Tarik Admani
*Please rate helpful posts*

SLM2048 Switch question

Hello,
I currently own a Linksys SRW2048 witch supports TCP/ User Datagram Protocol (UDP) port ACL.
I would buy the same switch but my supplier doesn't have it. They propposed me an alternative to Linksys SLM2048.
My question would be: does this switch support TCP/ User Datagram Protocol (UDP) port ACL ?
If it doesn't, could you suggest me an alternative(apropiate price) of 48ports managed Gigabit L2 switch witch supports that feature?
because I would really need that.
Thank you in advance,
Mike.

Hi Mike,
It does not really suprise me that your supplier no longer has the SRW2048, as this switch will be end-of-life soon. But, don't worry, things can only get better, there is a very good and brandnew alternative, the SG 300-52. Actually it has all the features of the SRW2048, and more, better, newer
For more information for the SG 300 series switches, take a look here :
http://www.cisco.com/cisco/web/solutions/small_business/products/routers_switches/300_series_switches/index.html
If you would need any more information, don't hesitate to contact me or your nearest Small Business Support Center.
Best regards,
Nico Muselle
Sr. Network Engineer - CCNA

Switching from photographer plan to complete and back possible?

Hello. A small question.
I currently have the photography plan (CC+lightroom) which I use daily.
I am starting a few movie endeavours and also back into simple sites editing, and as a result I am considering switching to the complete edition as adding premier pro and maybe after effect and muse will cost more than the complete bundle. This will for a few months until february, and after that I'm not sure I will continue with it, but if so, I will for the most of the next year.
So my question is if I do switch to the complete bundle, can I go back to the photography bundle back, remove the apps I don't need, and just stay with photoshop+lightroom bundle as its currently priced? Or it will be more complicated than that?
I just wants a heads up to know what my options are, should I purchase those apps separately or save money for the complete bundle?
There is a current 40% off the complete bundle which can also save me some money.
Cheers.

TP57 wrote:
In your case it would be more cost efficient that you would figure our the length of time that you will use premiere pro and after effects. For example, if you only need to use both products for 2 to 3 months, it would be more economical for you to subscribe to both of these applications on a month by month basis. On the next year when you know you will need access to all the apps then you can select to subscribe to the individual or business solutions for the complete creative cloud.
Trust me as this will save you a lot of time in trying to save money by subscribing/cancelling/subscribing on a short-term basis.
I will need them for about 5 months.
If I buy them separately, at least premier pro and after effects, I will need to pay 200$/300$ (2 or 3 apps), and if I cancel I will have to pay for about 140$/210$ (50% of remaining 7 months or keep using it for 7 more months).
If I buy the current available complete package which is currently on a discount for 30$/month for the first year, I will pay 150$, and than pay 105$ if I cancel, and I get everything.
If I continue for another year, the full price of the complete package for 50$/month will still cost less.
I just want to make sure I'm not doing a mistake, and if I do cancel the complete package (which is currently the best price), I will still be eligible to buy the photography package (as I don't have a previous CS3-CS6 license).
If its questionable, I will need to use a different ID to purchase a complete package, which as I understand the EULA, its not allowed (or am I mistaken?).

Switching from shared Apple ID to separate Apple IDs with Family Sharing?

My family (me, wife and 2 kids) all share the same Apple ID. We share it for everything (App Store, iCloud, etc.). We did this because I didn't want to purchase the same music or apps multiple times. This has worked well for several years. But with iOS 8, we can use Family Sharing, but not if we share an Apple ID (at least not when using a shared Apple ID on iCloud). So my question is, how do we switch from a shared account to separate accounts using Family Sharing, while not losing access to any apps or music? I've seen many previous posts (pre-iOS 8) state that I can create new Apple IDs for my wife and 2 kids, then just use them for iCloud and leave the App Store associated with our existing shared Apple ID, but then when they go to update apps, they'll need to enter my password (which my kids do not know, since they don't currently need the password to updates apps with the shared Apple ID. When they want to purchase a new app, be it free or paid, they have to come to my wife or me to enter the password.)
What I'm think is this. Let me know if this would work:
1) Create new Apple IDs for my wife and kids.
2) Before changing anything on their iPhones, go into my phone (which will remain on our existing Apple ID) and turn on Family Sharing and add them to my family so we can share purchases.
3) Once Family Sharing is enabled, change their iCloud login to their new Apple ID accounts. That enables Family Sharing on their devices and they'll be part of my family.
None of the above steps solves for the "you must enter Dad's Apple ID password to update your apps" problem. So my question is, should I also change their App Store account to their new Apple IDs as well? If you say that won't help (because apps will always be associated with the Apple ID they're originally purchased with), then I don't understand how Family Sharing works when you buy apps. In other words, will Family Sharing enable us to share apps that we already downloaded, or just new apps?
Thanks for any help you can provide.
Jason

You should be able to have purchases from more than one Apple ID on one device (up to five I think). When you create the new Apple ID and just leave the apps already on the ipad alone, you shouldn't have any problems.

Question re: ifIndex in G8264 switch

Similar Messages

Maybe you are looking for