Question reg. sapscript. please help
I am modifying a standard medruck sapscript form for the customer needs. Now on the printout, if i want the text under 'item_text' text element to come after the text under'ITEM_SCHEDULE' text element, where should I change the code? in main program ? or in form itself? Please give me an idea reg. this.
/E ITEM_TEXT
IC ,,&TTXIT-TDTEXT&
/: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID& LANGUAGE &
/E ITEM_SCHEDULE
IM ,,,,,,&RM06P-PRMG1&,,&T006A-MSEHT&,,&RM06P-PRITX& &RM06P-LFDAT&,,,,
= &RM06P-PHTXT(27)&
Thanks a lot,
Krishen
Yes it will, and yes you will have to copy a couple of things, first you will need to copy the driver, program SAPFM06P into custom program SAPFZM06P. Then copy function group MEDRUCK into ZMEDRUCK with all the function modules, then go to the SAPFZM06P program and copy the include program FM06PE02 into ZFM06PE02 and include this in the main program SAPFZM06P, inside the ZFM06PE02, change the call in the ENTRY_NEU form to call the "Z" version of your function module in the ZMEDRUCK function group.
form entry_neu using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
l_druvo = '1'.
else.
l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
<b>call function 'ZME_PRINT_PO'</b>
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
You must then change your configuration for the purchase order to tell the system to use the "Z" versions of the print program SAPFZM06P
Regards,
Rich Heilman
Similar Messages
-
Support ,
This is Thamer mohammad
,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishesThese boards aren't Apple Support; nobody here can reset the questions. Click here, phone Apple, and ask for the Account Security team, or fill out and submit this form.
(90021) -
I forgot my security questions can you please help me?
i forgot my security question can you please help me?
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email BEFORE you forget the questions/answers. -
Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes
<Email Edited by Host>Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
Dear Apple Support ,
This is amany alnajjar ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
Dear Apple Support , This is FAHAD ALGORWAN ,I can't remember my security
> question answers , so Please help me to Create new Security QuPlease do not make multiple posts. One is enough. These are user forums, so you are not speaking to Apple here.
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
Dear Apple Support ,
This is ***Abdurrahman*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,The people on these boards aren't Apple Support and can't do that for you. You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102461) -
rt ,
This is ***majed*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I can't remember my security question answers , so please help me to Create new Security Question for my Account : **********
, Best wishes
<Personal Information Edited by Host>We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
IPhone 3g broken ,Genuis Bar Questions. ****LONG**** PLEASE HELP
Well i guess ill say the whole story. I bought my iPhone on August 6th and i had a plane to catch that day to Cali. So i synced it all up with my mac mini. My dad also got one and he went to Brazil (which is why im in Cali) While ive been here ive been syncing my iPhone with her windows computer to put apps on. Everything has been great until this week. Im calling it **** week. Ever since i updated to 2.0.2 its had no service most everywhere, apps and safari quit and when safari doesnt it runs extrememly slow and typing lag is worse then ever. I figured whatever maybe once i go back home it will start working again. Well thats not the case. Last night i was downloading apps and one of them got stuck when it was almost done installing. So synced it with my computer and it took it off.. well it still showed that it was installing. So i restarted my iPhone and it got stuck at the Apple logo(which is a common problem i know about the big thread also) so i restarted it and everytime it would go back to the Apple logo. I tried restoring it and everytime i plug it into my computer its makes my computer run extrememly slow and itunes wont come up. Then when i unplug it itunes pops up and everythings running normally. So after about 6 hours straight of trying to fix it, its now not turning on at all. Even when i plug it into a power outlet and computer. So basically i have a broken iPhone and its worthless. I have an appointment but im wondering if its even worth it.
Genuis bar questions:
1. Does the accoutn holder have to be present? Im on the account but not the account holder. My dad said to try.
2. Will they try and hold my iphone? I cant leave it there because i have to leave that day.
3. Would they just give me a new one? I would love that and not have to go through all this trouble
Please help im stuck withotu a phone in the worst possible time.Jaden Hawk wrote:
Genuis bar questions:
1. Does the accoutn holder have to be present? Im on the account but not the account holder. My >dad said to try.
No.
2. Will they try and hold my iphone? I cant leave it there because i have to leave that day.
No.
3. Would they just give me a new one? I would love that and not have to go through all this trouble
If there is a hardware problem with the iPhone they will replace it for you.
You may want to update and restore the iPhone.
http://docs.info.apple.com/article.html?artnum=305744
Jason -
I've got nothing(gray screen, question mark folder) Please Help!
This problem is on my girlfriend’s computer, about the same as mine, PB G4 800mhz 768mb RAM, 10.4.x
I am a competent user and this one has me worried…
Problem
Last night she goes to the computer sends an IM checks her e mail, watch some tv, goes back to the computer to look something up on line and its frozen, I do not recall if the mouse was visible but I don’t think there was a beach ball. She asks me what to do I said just give it a few minutes maybe it will process through what ever it is and be back to normal. We both forget to take a look at it before bed.
This morning computer is still frozen/non-responsive and the fans are running... Shut down by holding down the power key. I try to re-start by pressing power key, screen lights up with gray background wait wait then the folder icon comes up with the question mark in it. This gets me worried.
What I have tried
I have tried to get it into target disc mode with my powerbook(computer B), I start up computer A holding down the T key and the screen goes to that moving firewire icon but the hard drive does not show up on my computer B.
I tried unplugging it, removing the battery and re setting the pram
I tried to run the hard ware test CD, but when I hold C to boot to the CD it spins up the disc and the little hardware test folder is in the middle of the screen but then it does not load any further. I had to shut down holding the power button. Computer would not eject CD so I had to start up and use unix eject cd command, this worked.
I tried target disc mode again.
I tried just a plain start up again.
I do not have the 10.4 CD at my house so I have not tried to start from that yet, but I can borrow one from grandparents this evening after work, but I am worried since it will not start from the hardware test CD that it will not start from the system CD.
I believe I have computer A backed up from either last week or the week before( I thought about doing it this weekend but did not get to it ), she is not backed up daily as I am. Though she said there is quite a bit of important work from this past week.
I have no idea what to do next or what the source of the problem could be(software or hardware). I fear the worst, but hope that you can share an idea that will turn out for the best!
Please help me fix this computer, I can play with it some when I go home for lunch and then I need to get it fixed if possible this evening because she needs some important class work and grad school applications from it!
JeromeSo is the next step to try and re-format the drive and then use super duper to copy the back up over to that drive and then run disc utility and disc warrior on it? Which specs should I select for the re format, do they have to be the same as what is on my back up drive?
Yes, reformatting the drive is the next step. Use your Panther installer discs, choose Mac OS Extended format, and check the box to install OS 9 drivers, just in case. The "Verified" SMART status is somewhat less reliable than a "Failing" status would have been: "Failing" definitely means trouble was detected, but "Verified" could just mean nothing seemed to be wrong right at the moment when you happened to ask. So if there's any trouble reformatting the drive, replace it: you shouldn't entrust anything important to it. If all goes smoothly with the reformat, the drive probably really is OK.
What you can do with your backup depends on how you created it. If the backup is a bootable clone made with Carbon Copy Cloner or SuperDuper, you can clone it back to the reformatted drive the same way you created it in the first place, then add the extra files that were created or modified after you made the backup. If you just Finder-copied the drive to another drive, the backup isn't bootable, and copying it back onto the reformatted drive won't make that one bootable either: OS X isn't Finder-copyable. In that case, I really shouldn't advise you on reconstructing the former contents of the drive from your backup — my only experience of backing up OS X disks is by cloning, which eliminates all the hassles of making sure user accounts, passwords, permissions, etc. are transferred correctly to the backup, and then transferred correctly back to the original disk in a restore. Nearly four years after my adoption of OS X, I confess I'm still far more mystified by many aspects of it than I ever was by the old-time Mac OS.
Message was edited by: eww -
HT5312 I forgot my Secret Question's answers please help me out!
I forgot my secret Question's Answers I want to buy some app from Apple but it asks me my secret Questions answer that I forgot, please help me out!
Thanks and Regards,
emamDidn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can assist with recovering lost answers.
(88586) -
Myfaces t:columns question...please help me...
Hi guys,
i've tried lots of solutions,but i think i've find right solution to solve my question.
I have to create a datatable with a fixed number of columns and other dynamic columns.
I've rendered it using t:columns of Myfaces and it works fine.
It's a piece of jsp page
<t:dataTable
value="#{biosamplesTable.biosamples}"
var="biosampleItem"
binding="#{biosamplesTable.biosampleDataTable}" >
<h:column >
<f:facet name="header">
<h:outputText value="Organism" />
</f:facet>
<h:selectOneMenu value="#{biosampleItem.organism}">
<f:selectItems value="#{getDropList.selectOrganism}"/>
</h:selectOneMenu>
etc..etc..
<t:columns value="#{biosamplesTable.columns}" var="col">
<f:facet name="header">
<h:outputText value="Nuova" />
</f:facet>
<h:inputText value="#{biosampleItem.column}" />
</t:columns>
<h:column>
<f:facet name="header">
<h:outputText value="Actions" />
</f:facet>
<h:commandButton
value="Invia dati biosample" actionListener="#{biosamplesTable.editBiosample}" id="editBiosample">
</h:commandButton>
</h:column>
</t:dataTable>
</h:form>
} My only question is:
I'm able to retrieve the h:column values for each row,i do it in editBiosample method
public void editBiosample(ActionEvent event) throws SQLException {
setBiosampleItem((Biosample) getBiosampleDataTable().getRowData());
try {
if (conn != null) {
Experiment exp = (Experiment) ViewUtils.eval("#{experiment}");
PreparedStatement pst3 = null;
pst3 = conn
.prepareStatement("INSERT INTO campione(id_,organismo,protocollotrattamento,metodoestrazione,tipoamplificazione,protocolloibridazione,protocollomarcatura) VALUES(?,?,?,?,?,?,?)");
pst3.setInt(1, exp.getAutoKey());
pst3.setString(2, getBiosampleItem().getOrganism());
pst3.setString(3, getBiosampleItem().getTreatmentProtocol());
etc...
pst3.executeUpdate();
pst3.close();
catch (Exception e) {
e.printStackTrace();
}now i have to retrieve the h:columns values for each row,how can i do it?
Please help me,i've started so but there is some error,each values is null!!
For generating columns i've used..
public List getColumns() throws Exception {
if (load2 == 0) {
for (int i = 0; i < 3; i++) {
UIOutput input = new UIInput();
ValueBinding myItem =
FacesContext
.getCurrentInstance()
.getApplication()
.createValueBinding("#{biosampleItem[" + i + "]}");
input.setValueBinding("value", myItem);
UIColumn column = new UIColumn();
column.getChildren().add(input);
columns.add(column);
load2=1;
else this.columns=columns;
// Reload after every request.
return columns;
}what's wrong?
Please help me,i need to solve my problem...
thanks in advance...
Message was edited by:
giubat
Message was edited by:
giubatOk, you have more than one frame and when you make your dialog, it is only modal on one frame.
Not sure how to make a workaround for that. That would proably require that when another frame got the focus, it should check if any of the frames has a modal dialog visible, and if that is the case, it should move the dialog to the front (dialog.toFront()). -
Authorization question - Need Answers - Please help
Hi,
I have collected the following questions. Can you please answer? Thanks.
1) What is Authorization object
a. Collection of Authorization fields
b. Authorization fields fill with Values
c. Group of Authorization Key.
d. Authorization object fill with Values.
2) Which of the statement below accurately describe when S_RS_ADWMB will be used.
a. when using transaction code RSA1, the administrator work bench
b. when creating new query in the Bex Analyser.
c. When updating source system in RSA1
d. None of the above.
3) which of the following objects protect ODS data.
a. S_RS_ODSO
b. S_RS_ODSP
c. S_RS_ODSS
d. S_RS_ODSA
4) When would you use the $ in an authorization value?
a. If you are using user exit to fill the authorization values at runtime.
b. If you have cost centres that starts with $
c. Anytime you want to grant all values: $ is just like * in the SAP R/3
d. If you want all variables to be filled with authorization values at runtime.
5) Hierarchies are used in SAP BW to rank Employees.
a. True
b. False
6) RFC destinations tell SAP systems where external systems are located.
a. True
b. False
7) Which are the following objects are used for infosource with flexible updating
a. S_RS_ISOUR
b. S_RS_ISRCM
c. S_RS_ISOCR
d. S_RS_ISCOM
8) Which of the following regarding Info area is correct
a. Group of Infocube.
b. Group of Infosource
c. Group of source system
d. Group of actual data.
9) Field S_RS_COMP can protect the query elements by infoarea,infocube and query name that user is trying to access.
a. True
b. False
10 ) Authorization object S_RS_HIER is used when creating infocubes.
a. True
b. False
11)If the info object is authorization relevant then it must have authorization object.
c. True
d. False
12) What is composite role.
a. Includes number of roles
b. Single role including number of authorization keys\
c. Role within a role
d. None of the above.
13) EP uses same role for portal access.
a. True
b. False
14) You must include S_RFC in any role used by reporting user.
a. True
b. False
15) Same BW role can be used for another BW system using the same client.
a. True
b. False
Advance Thanks,Can anyone please help me urgently?
Advance Thanks. -
I think my daughters account was hacked and the resuce email and the security questions were changed. PLEASE HELP
Many Thanks,
AlexAll you can do is contact iTunes:
Contact iTunes
Maybe you are looking for
-
Blackberry Link Peer Manager Has Stopped Working
Hello, Sorry if this message has already been posted before, but I have downloaded the latest version of Blackberry Link (previous version worked fine) but just as the download is completed I receive a message telling me that Blackberry Link Peer Ma
-
hi, can anyone tel me wat is error in this coding AT LINE-SELECTION. DATA: g(30), ref_parameter(30) VALUE 'parameter by reference', val_parameter(30) VALUE 'parameter by value', field_symbol LIKE itab-lifnr. FIELD-SYMBOLS: <f> TYPE ANY. ASSIGN itab-l
-
Stacks replaced with question marks. Why?
I made several stacks with Apple and 3rd party applications. After the mac was awakened from sleep mode, the stacks were replaced with question marks. Anyone know why? and how this can be avoided? Thanks
-
why is the ipad 1 not supported beyond ios 5.1.1? i bought my ipad new when they were first released and it is still working just fine. had i known it came with an expiration date i may have chosen a different device alltogether.
-
Security Update....restart.....now Mail won't open!
I just installed the latest security update, restarted and now Mail won't open. What's going on?