Question regarding 70-682 Windows 7 exam

Does anyone know if the recently added windows 7 upgrade exam 70-682 can be used in place of the 70-680 exam for MCITP: Enterprise Administrator. I'm currently a MCSE and MCDST if i upgrade my Desktop support to windows 7 it would be very annoying if i then had to take another client exam in order to upgrade from MCSE to MCITP, especially when i'd already have the full qualification of MCITP: Enterprise support technican in windows 7.

Hi, Ndlangamandla!
<---Please vote here if my answer is helpful, since you cannot mark my response as an answer to a post that you did not start.
There are six (6) different MCSE certification titles for Windows. Here they are, including two (2) unrelated titles for SQL Server (Data Platform and Business Intelligence):
http://www.microsoft.com/learning/en-us/mcse-certification.aspx
No matter which of the six (6) MCSE certifications you are going for, you will need to pass two (2) exams to upgrade to
MCSA: Windows Server 2012. They are:
Exam 70-686, Windows 7, Enterprise Desktop Administrator
earns you the two (2) titles: MCITP: Enterprise Desktop Administrator on Windows 7 and MCSA: Windows 7
Exam 70-417,
Upgrading Your Skills to MCSA Windows Server 2012 earns you the title:
MCSA: Windows Server 2012
Since you have already earned the title MCITP: Enterprise Desktop Support Technician, I am guessing that you want to go for
MCSE: Desktop Infrastructure. However, I could be wrong. You can go for any of the six (6) MCSE Windows certification titles by just passing its two (2) related exams.
For example, to earn the MCSE: Desktop Infrastructure title, you will need to pass these two (2) exams:
Exam 70-415, Implementing a Desktop Infrastructure
Exam 70-416, Implementing Desktop Application Environments
Good luck!
Best wishes, Davin Mickelson

Similar Messages

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

A question regarding Management pack dependency.

Hi All,
I am new to SCOM, I have a question regarding management pack dependency.
My question is, Is Dependency is required when New alerts are created in a unsealed MP and the object class selected during alert creation is (i.e Windows server 2012 full operating system) and it is on a Sealed management pack ?
For example i have a Sealed Windows server 2012 monitoring management pack.
I have made a custom one, for windows server 2012, So if it the custom is not dependent on the sealed Windows server 2012 monitoring management pack, Then cant i create any alerts in the custom management pack targeting the class Windows server
2012 full operating system ?

Hi CyrAz,
Thank you for the reply. Now if your's and my understanding is the same, Then look at the below what happened.
I created a Alert monitor targeting a Windows Server 2012 class in my custom management pack which
is not dependent on the Windows server 2012 management pack, But how was i successfully able to create them when the dependency is not there at all, If our understanding is same, then there must be an Error thrown while creating the monitor its self right
? But how was SCOM able to create that ?
Look at the below screenshot.
I was able to create a monitor targeting Windows server 2012 Full operating system and create a alert on the custom management pack which is not at all dependent
on the Windows server 2012 Sealed MP.
Look at the dependency of the management pack where i do not have the Windows server 2012 management as my custom management is not dependent on that.
Then how come this is possible ?

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Some simple questions regarding the Xcode.

I have some preliminary questions regarding the Xcode (objective C):
What is the difference between the programming files followed by .h and .m?
What does an asterisk * followed by a text mean (i.e. *window;)?
Is there any source that briefly explains the most common codes with examples (nsstring, nsarray, iboutlet, inaction.....etc)?
Any other tips will be highly appreciated.
Many thanks.

Xcode is the IDE.
Objective-C is the most common language used within Xcode.
UIWindow *window ..... the * means return the address of the instance variable 'window'.
An * is called a pointer to a variable.
Everything you need is explained here: https://developer.apple.com

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

My questions regards Camera Raw

I am posting this to both the PhotoShop and Lightroom forums. I use PhotoShop CS4 and Lightroom 1.1 on a Windows XP OS.
My question regards Camera Raw.
Question 1: If I open a RAW file in PhotoShop will the properties remain if I later open it in Lightroom, and vise-versa. Previously I had used Canon’s DPP and once I opened files in PhotoShop it was at square one. I concluded this was due to different manufacturers. I can adjust to that. Now that I am staying with just Adobe products I want to make sure I don’t have to do everything twice.
Question 2: Using Bridge I have opened some jpg’s in Camera Raw and manipulated them. It seemed to work better if I clicked “Done” rather than Save Image (if I need to save it in another directory).
Question 3: If I am working in PhotoShop and would either like to open a Raw file or manipulate a jpg in Camera Raw, is it possible to open Camera Raw without having to use Bridge?
Thanks in advance for any assistance.

rollsnut wrote:
I am posting this to both the PhotoShop and Lightroom forums.
You would have been better off asking on the Camera Raw Forum, not Photoshop (since you posted it only to the Windows side).
As for your questions, you can indeed coordinate settings to and from Camera Raw and Lightroom but it's a matter of understanding how metadata editing works...In Camera Raw/Bridge, settings are saved in the file or in a side car file...in Lightroom settings are saved in the Lightroom catalog database, not the file or side car UNLESS you specifically instruct Lightroom to read or write the settings to or from the file.
So, what Camera Raw does to a file will need to be read FROM the file inside of Lightroom. Just make no mistake that once the image in actually processed and opened inside of Photoshop, it's no longer a raw file but a processed file and anything you do to it afterwards in Photoshop will not be in the original raw file.
The other questions aren't really Lightroom questions and would be better of posted in the Camera Raw forum...

X230: Questions regarding included 32GB msata SSD

Spoiler (Highlight to read)
Hi... I've got a couple of questions regarding the X230 offered in Singapore, which comes with a msata ssd:
"Up to 5x Boost 32GB Micro Solid State Drive Outperforms 5400rpm Drive "
I AM assuming this is a msata ssd?
http://shopap.lenovo.com/SEUILibrary/controller/e/sgweb/LenovoPortal/en_SG/special-offers.workflowho...
1) Given the limited size of this msata SSD (32GB), can I assume that only the operating system (Win 7) is installed here by default?
What about the folders under "My Documents", "My Pictures" and etc. Are they also installed into the SSD by default? I tend to leave all my work documents in that file, and it fills up pretty fast.
2) I assume that the recovery partition is still located in the 320GB SATA HDD(7200rpm)?
3) When I do a recovery from the Lenovo rescue/recovery programme (from the recovery partition), will Win 7 install correctly into the SSD, and not the HDD.
4) If I do a factory recovery using the recovery DVDs (which I will create as soon as I receive the x230), will everything be installed correctly? Windows 7 to SSD and recovery partition to HDD?
Thank you for your time!

the expressways software would make the 32 gigs mSATA a drive cache for the main HDD. Nothing is really installed on the mEATS, only files that are frequently used or predicted to be used frequently will be replicated on the mSATA.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I need help with a question regarding XML

I have an exam tomorrow, and I was checking exams from previous years. There is a multiple choice question regarding XML, and I don't know all the correct answers (some are pretty obvious).
It's plattform independent
It allows UML representation
It's a Text Only format
It's faster to process than native binary formats
It's a data exchange standard
It allows specification of the meaning of the data in the document
It comes from HTML
.NET and J2EE provide tools to handle it

In the beginning there was SGML... the newest HTML
standard is an XML defined language (although most
sites and pages are still not XML compliant). Soyou
can think of HTML as a subset of XML but XML isnot
by any means a subset of HTML.But wasn't XML's format based on the original HTML?
That is, XML is a generalization of the original
HTML. So, the "true"/"false" determination depends
on how you define "It comes from HTML" (I thought it
was derived from HTML, which would make the
statement "true" [IMHO], but I could be wrong).No XML is not derived from HTML. Markup languages existed well before HTML. HTML popularized them to a large extent but it was not the first by any means.
See http://en.wikipedia.org/wiki/Generalized_Markup_Language
Also Wiki states in it's XML article that XML is a subset of SGML (which through that article) is a descendent of GML
The language heirarchy from SGML is as follows
SGML ---- HTML (old spec and deprecated)
       |
       |
       ----- XML ----- XHTML (current XML spec)edit: the tree got screwed up. XML descends from SGML directly.
Message was edited by:
cotton.m

I'm tired of constantly reading "not yet" for any questions regarding a 64-bit Firefox. Exactly WHEN will there be a FF 64-bit?

I'm tired of constantly reading the simplified answer of "not yet" for any questions regarding a 64-bit Firefox. Exactly WHEN will there be a Firefox 64-bit?

That hasn't been decided yet for Windows PC's. So instead of "not yet", how about '''when it is ready for release'''?

Question regarding pse 8

When I have multiple pictures up, how do I keep two pictures from merging when I move one of the pictures to the side? I would like to turn this feature off.
Thanks.

I opened 4 photos into Adobe Photoshop Elements 8 and have set the pictures to "float in all windows" so I can easily grab any one of them and move them to compare pictures.What happens is that the picture I am moving fades and suddenly I have two pictures, one on top of the other in one frame. In the bar at the top of the "merged" picture, it shows the file names of two pictures. From that top bar, I can undo the "merge" by grabbing one of the pictures and dragging it to the left or right, and I am back to the two original pictures. I would like to be able to move pictures around without two frames becoming one frame with two pictures layered. Hope that is a better explanation. Thanks. DianeDate: Mon, 29 Oct 2012 12:47:56 -0600
From: [email protected]
To: [email protected]
Subject: Question regarding pse 8
    Re: Question regarding pse 8
    created by hatstead in Photoshop Elements - View the full discussion
I don't understand. Multiple pictures up - what does that mean?2 pictures merging when you move one to the side - how do you make them merge and move to the side?Feature off - when does this feature come on?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4808688#4808688
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4808688#4808688
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4808688#4808688. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Question regarding 70-682 Windows 7 exam

Similar Messages

Maybe you are looking for