Question regarding a method of stocking data

I know this thread already is in the "New to Java Technology" Forum, although I said the topic was closed there so I could open it back here.. I realized it would be more fitting here and it would probably get more replies...
I am working with a friend on a Client for Ultima Online and we have to stock data concerning the various objects and characters in the same sector as the Client. We have 3 ideas of what the best method could be, but we have no clue which method would be the most performant (concerning both speed and memory), or if there is a better method to do so.
Here's a description of the methods we thought about:
Method #1
Create many class files for each type of object, having the various related variables in their respective classes...
Exemple: A principal class called DataObject which holds the data common to all objects/characters. Classes which extends DataObject such as DataMobile (for the Characters) and DataItem (for the Items) in which the data specific to characters and items is stocked. And also various classes for the various types of objects such as Containers which will extend DataItem...
Method #2
Create a single class file which would hold an Array containing the various variables and of which the size would be the maximum amount of parameters possible. The array would work in relation with a byte which would hold the type of data stocked into the Array, this way we could know the structure of data and retrieve this data where it is in the Array...
M�thod #3 <= This one was the first idea and we know it is the worse one.. Telling you about it though
Create a single class file which would hold all the possible variables. These variables would only be used when necessary.
M�thod #4
Create a single class file which would extend java.util.Hashtable. The parameters would be stocked this way: The Key mapped to the value would be the type of parameter (represented by a Byte (not byte)) (type of parameter such as Serial, Name, Strenght, Dexterity, etc...). And the value would be stocked as a String, Integer, Short or Byte according to the case (once again, it isn't primitives, it is the classes from java.lang.*).
Thanks in advance for the suggestions :)

This is not an advanced language topic. This is a beginner question, I would be very surprised if you got an answer in this forum.

Similar Messages

Waveburner; a few Questions regarding track files and Session Data

After a bit of negotiating, I'm almost ready to burn. Was having problems with file locations and discovered that i had multiple files in different locations. Those have been eliminated and all relative track files are in one place now with the Song Data File as well.
I then re-imported the individual aif tracks only to find that all of my fades and edits are GONE. It appears that I may have to DO THEM ALL OVER AGAIN! Please tell me that there is a work around.
Is it possible to import only the Session Data related to the fades and edits(everything but the actual audio files), so as to avoid all this "do-again" work?
I was also wonder if it is necessary, or perhaps a good idea, to change the File INFO for each of the individual audio track files from "OpenWith" iTunes (default setting) to "Open With": WAVEBURNER ?. (selectable on the aiff files, "Show More Info" window
Currently the aif files are set to "OpenWith" iTunes (default)
One last question please.
Is Waveburner really up to snuff? How many people are using this for Mastering and Burning CD's? I'm about to start inserting some AU Mastering Plug Ins and I'm hoping for the best. Any other suggestions are greatly appreciated.
G5 Dual 2.0/PBook G41.5Ghz/LogicPro7 Live5 Reason3.0 PansncDA7 TascamFW1804 Mac OS X (10.4.7)

You're grammer isn't bad jord, it was I who asked a plethora of questions under one Subject heading.
When i open the project file(.wb3),
The prompt says;
"Please choose a replacement from the list below:"
/Volumes/320GB HD/Users/ahuihou/.Trash/1 Track 01.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/2 Track 02.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/3 Track 03.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/4 Track 04.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/6 Track 06.aiff
As you can see the files are in the trash.
The first problem is that there are no actual files in the trash. Just an icon of a CD Disc which was dragged there to eject it, It is no longer in the disc drive/tray. Perhaps i should put the disc back in the drive and then update/replace the files afterwords. (The CD is scratched.)
The strange thing is that i can still preview the track that's in the trash by selecting More Info and playing it on the little Quicktime player bar. I guess the file is in a cache somewhere?
I've looked everywhere on all drives for the specific files but can not find them anywhere.
In the Replacement prompt there is a place that I can check to "Search in the same folder for subsequent files" button on the "Replacement" prompt.
which "same folder" is it refering to?
The Trash folder where the old files are or the Folder where the actual .wb3 project file is? I do have all of the correctly named song files/regions in the same folder with the project file.
maybe i should just start again. i'm not one to give up easy though and would much prefer to "beat" the computer at the game.

BPC 7.5 NW SP5 - Question regarding Transformation file for exporting data

Hi Experts,
I have a requirement to export data from a BPC application to App.server/UJFS. There are currently 13 dimensions in the application. The user requires the output file to contain only three dimensions followed by the amount(signdata), namely
| COSTCENTER | ACCOUNT | TIME | AMOUNT |.
How do i handle the same in transformation file?
Currently i am using the following transformation file but i am having issues validating it.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
OUTPUTHEADER=*COSTCENTER,ACCOUNT,TIME, PERIODIC
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
COSTCENTER=*COL(2)
ACCOUNT=*COL(4)
TIME=*COL(13)
AMOUNT=*COL(14)
I tried to remove the OUTPUTHEADER from *options and tried but it still gives the same issue.
Please help me as to how i can handle this scenario.
Thanks,
Victor

The 'Export' data package which comes as part of a support pack enhancement does not support using Transformation/Conversion files to modify data prior to transport.
Please refer to section 3 (Limitations) in the below how to guide.
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/b0427318-5ffb-2b10-9cac-96ec44c73c11?QuickLink=index&overridelayout=true
Hence your only option is to manually massage data in the spreadsheet after exporting.

Genius Question regarding classical music (or meta-data in general)

OK - I have a fairly large library and probably 50% of it has meta-data that when pulled up automatically I leave (this is for the bulk, but not all of non-classical genres) as is post import and/or purchase from itunes. Now, here is the enchilada:
I am a big classical music listener and m constantly tweaking my library to make it as easy as possible to organize classical music - I still don't have it perfected as there isn't a standard - there are many standards and many are based on how you want to prioritize/search for things: I use composer as the "main" field to search(I have it as Mozart, Wolfgang Amadeus as opposed to just Mozart or Wolfgang Amadeus Mozart) and then I also search by Artist as a secondary way which is fine should I want to focus on a conductor or a string quartet, etc.
Now, there are basically three options that most folks will use with classical meta-data:
1. If purchased from iTunes, leave it as is
2. If pulled from CDDB, leave it as is
3. My methodology: I do both 1 & 2 and more than 95% of the time I have to tweak the way it looks.
Assuming all of this is common amongst the 65,000,000 iTunes users, I would love to know how Genius works with this - I uploaded to he Genius Cloud last night my library. How does Genius look at the same album which may have either simple or significant meta-data discrepencies/changes vs. the way it is in the iTunes system? Have I lost anyone in my rambling??
Thanks,
Steve
hearand I do it by last name, first name

Based on what I have been seeing over at the Macworld forums, Genius does not play too well with classical music and the situation is really bad if the user modifies any fields to their liking. Using the ISRC code would make more sense, as it is something the user cannot modify and to rely on user-definable fields would result in many libraries being crippled in terms of the new feature.
In terms of the metadata, there are two composer fields: Composer and Sort Composer. You would place “Mozart” or “Wolfgang Amadeus Mozart” in the composer tag and “Mozart, Wolfgang Amadeus” in the Sort Composer tag to force the proper sorting order.

I 'd like to know regarding a method to separate a standby node from CE

Hi community
I have a question regarding a method to separate a standby node from CE.
I would like to know if it is possible to run the vary off command on standby node while active instance is working.
For example,
-shutdown standby instance on standby server.
-run vary off and exportvg command on standby node while active instance is working.
Version Info
-OS : AIX 6.1
-DBMS : Sybase CE 15.5 with 2Node
-Shared Volumn : DS8700 ( 4TB )
In this case, I would like to know if there is any side effect on Active instance.
Our CE version is ASE15.5 ESD5.3 on AIX.
Thanks in advance
Regards
Taiwoo Kim

To make sure I understand, you have a two node ASE cluster....one of which is active, the second is idle.   You want to detach (for some reason) the disks from the second node of the cluster.
From the cluster viewpoint, provided you shutdown the ASE instance on that node and don't run any cluster utilities on that node (e.g. sybcluster, quorumutil, etc.) - then whether the disks are attached or not is likely not going to be an issue.   It would be no difference to the surviving node than if you shutdown the other node completely (host included).
What concerns me is that you obviously are planning something that affects that volume group - e.g. moving it to a new machine???    Swapping HW??? Updating OS volume management firmware???   If swapping HW, remember, the quorum has the list of participants in the cluster - so unless the new hardware hostname/ipaddr matches the old, you will need to modify the quorum entries (TechSupport can help with this) - although the better approach would be to build a new node of the cluster on the new HW (temporarily a 3 node cluster) and then remove the old node from the cluster.    If updating OS firmware, just be careful that the patch doesn't cause problems with IO fencing by changing the SCSI PGR versions or something.

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding Polling data from database using DB Adapters in BPEL

Hi,
I have the following question regarding Polling data from database using DB Adapters in BPEL -
If I am selecting data from multiple tables/view to ultimately generate hierarchical xml document, is there a way that I specify polling all of these tables/views. Is polling limited only to one table/view?
Thanks
Ravi

Hi Ravi,
your question seems to have been answered for the question of polling a set of tables with one as the root, and getting back a hierarchical xml representing multiple related tables.
However you can also poll for changes to both the root table and its related tables. Not sure if this was your question or the one already answered. If the former please check out the sample
bpel/samples/tutorials/122.DBAdapter/advanced/polling/PollingForChildUpdates
Thanks
Steve

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

ACH payment method US- Value date in DME

Hi,
We are using ACH payment method. After the payment program is executed, through Environment>payment mediumDME administration, we download the txt file which is sent to the bank. In this file format, apart from the date in the header record, we find another date with record type 5 positioned at 70-75.
From which table and field this value is being populated? Also, if we need to change this date to the next day ( i.e. payment program is executed today, but this date should be the next day).
I did configuration in FBZP - value date ( put the days as 1); and also in SPRO: Define value date rules for bank transactions and assigned the payment method to bank transaction.
Despite all this; I do not see that the date in the DME file is not getting changed (position 70-75). I see that value date in REGUH table is changed to the next day.
So my questions are:
From which table this date is getting populated?
How to change this date to the next date?
Do we need to use any user exit? If so which one ?
Your help in this regard is highly appreciated.
thanks
Srinivasa Vepa
Sorry , I posted in the wrong forum. Please ignore this. Posted in SAP Financials

Srinivas-
That field in company batch header with record type is called "effective entry date". Please look at the attached thread.
Effective Entry Date
Shail

Question regarding Command pattern

Hi!
I have a question regarding the Command pattern:
//Invoker as defined in GOF Design Patterns
public class SomeServer {
    //Receiver as defined in GOF Design Patterns.
    private Receiver receiver;
    //Request from a network client.
    public void service(SomeRequest request) {
        Command cmd = CommandFactory.createCommand(request);
        cmd.execute();
}The concrete command which implements the Command needs a reference to Receiver in order to execute it's operation but how is the concrete command best configured? Should I send Receiver along with the request
as a parameter to the createCommand method or should i configure the receiver inside the CommandFactory or
send it as a paramter to the execute method? Since SomeServer acts as both client and invoker, SomeServer "knows" about the Commands receiver. Is this a bad
thing?
Regards
/Fredrik

#!/bin/bash
DATE=$(date '+%y-%m-%d')
if find | grep -q $DATE ; then
echo "OK - Backup files found"
exit 0
else
echo "Critical - No Backups found today!"
exit 2
fi
should work too and it's a bit shorter.
Please remember to mark the thread as solved.

BIG Question regarding INIT Loads..I am scratching my head for past 2 days

Hello All,
I have one big question regarding the INIT load. Let me explain you my question with an example:
I have a datasource say 2LIS_02_ITM for which I ran the setup tables on JAN 2008. The setup table is filled with say 10,000 records. After that we are running Delta loads everyday till today (almost 30,000 records). Everything is going fine.
Imagine I lost a delta (delta failed and did'nt I do a repeat delta for 3 days, by then next delta came), Hence I am planning to do a Init load again without deleting / filling the setup tables. Now my question is :
1) Will I get the 10,000 records which got filled initially in the setup tables or will I get 40,000 records (that 10,000 + 30,000 records)
2) If it bring 40,000 how is that possible as I hav'nt filled the setup tables?
3) Is it each time I need to fill the setup tables to start the Init load.
Waiting for your guidance.........

Yes...to answer your question
But...agin I will suggest not to go by that method. Only one delta had failed so why do you want to wipe away the timestamp of the last init just becasue of 1 delta failure? it is possible to correct it
First of all i hope you have stopped the process chain or put a hold to Delta jobs
Now, To answer your doubt, about the status red ..See you mark the status red in each of the the data target before delting the failed request from there (I usually do not just delete the requests frm data targets - I mark them red and then delte it to be safe).
Do not forget to delete subsequent requests afterthe failed delta (agin I always mark them red before doing so)
Regarding the actual reuest itself...you need not mark it red in the monitor..You have got to correct this request and successful - it will automatically turn green.
If after successfully correcting the request, it still does not turn green, you can set qm status green. The next delta will recognize this a successful request and bring in the next delta (this happens in cases where you have the infopackage in a process chian when it shows green because subsequent processes were not completed etc).
Let me know in case you have any questions.

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

DRQ: Check open purchase orders in Stock Data.

It´s a pray if you can click on a arrow in the Item Master Data under Stock Data in the Colum Ordered to see all open purchase orders for this Item. and the same for Commited to see the open seals orders.

Hi
If your query below is still unresolved, then I request you to
- pls be more clear on what your question is? this will help in providing a suitable solution.
Thanks,
Srikanth

Questions regarding how I pay my Line Rental Bill ...

Hi BT, I'm currently a BE Broadband customer, I was a BT Broadband customer back in the days when you had BT Home Hub 1.0 and 8mb packages which i was only getting like 5-6mb, 0.3mb upload and constant speed caps on my connection to 1mb. You guys didn't have true unlimited usage back then so being a gamer and someone that frequently downloads I changed to BE broadband. They gave me a steady 11mb connection with 1.3mb upload speed which I've been satisfied with. But now BE Broadband has been sold off to Sky which I don't think I want to be apart of as I've heard a lot of bad feedback and I really do not want to be forced into paying their line rental if I where to switch to Sky Unlimited.
So now I'm considering coming back to BT Broadband, knowing that you've probably improved over the years. I hope so. I know you have this whole BT Infinity going now but my area doesn't support fibre optic broadband and probably never will because I've looked on the BT Openreach website and it says there are no plans for my area to be installed with fibre optics which I would of wanted to have but oh well. What are the chances of my internet speed being the same as it is now with BE Broadband? I don't see why it would go any slower. Are your upload speeds around the same?
Also I have a question regarding the payment methods of your BT Line rental. I'm currently already on the BT line rental on the anytime calling plan. I pay the bill quarterly every 3 months, which I'm comfortable with. What confuses me is when I select the package to order BT Unlimited + Calls I only have the option to select Monthly Line Rental or Line Rental Saver. Why am I able to pay my phone every 3 months if those are the only two options? I'd prefrably want to stick to how I pay my phone bill. So further more how should I go about ordering BT Unlimited broadband without it interfering with my currrent BT line rental? I just want BT Broadband unlimited along side my current BT line rental method of pay. Would I still be eligible for the 6 months free and the gift card. Is the BT Home Hub 4 that comes with it free also? Also one more question, I'd need my MAC code from BE Broadband right?

This is a community forum. The people on here are other BT customers.
The speeds have certainly improved but only if BT's equipment at your exchange supports ADSL2/2+. If not, you'll get what you had before. While the speeds have improved, the same can't be said for the customer service. Upload on ADSL2+ can be up to about 1.2M. On ADSLMax, it's still capped at 448K.
BT like to combine broadband and phone on one bill. So if you get line rental and broadband, they will send you one monthly bill for both. You might be able to get them separately, but not through the web site. Try sales on 0800 800 150.

Question regarding a method of stocking data

Similar Messages

Maybe you are looking for