Question regarding apps 10.1.3 upgrade to 10.1.3.5

Hi All,
We did the following:
Fresh R12.1.1 install followed by rdbms upgrade to 11.2.0.3.
We then upgraded EBS to R12.1.3.
Now when I try to upgrade 10.1.3 Oracle_Home to 10.1.3.5, during installation I am getting the following error:
Patch #8626084
After clicking on "Install" button
Copying files for 'Oracle Distributed Software Assistant Server Patch 10.1.3.3.0'
copying 'dsaServer.sh'
Error
Error in writing to file '/d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.3/dsa/bin/dsaServer.sh'. [d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.3/dsa/bin/dsaServer.sh (No such file or directorty)]
My Apps 10.1.3 is located under /apps/ebs/PROD/prodora/10.1.3.
I cannot find where this /d2/R12/ab/apps/R1211XB9.. is coming from.
I found on Metalink Note ID : R12.x COPYRETRY Error occurs writing to file dsaServer.sh when applying IAS patch 8626084 [ID 1086315.1]
I rebuild from scratch the global Inventory and there are no miss match inside it. But still, the error persists.
Anyone has an ideea how to fix that?
Thank you,
Nayas

Hi Hussein,
Sorry for the confusion. For this 10.1.3 upgrade, I simply use:
./runInstaller -ignoreSysPrereqs (to ignore "Checking monitor: must be configured to display at least 256 colors Failed <<<<" message).
From the runInstaller log, at some point, it get that wrong value:
Setting variable 'sl_processList' to '/d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.3/j2ee/jre/bin/java,'. Received the value from the variable calculation.
variableName = IASname
Query Returned: R1211XB9_WEBOH__d2_R12_ab_apps_R1211XB9_apps_tech_st_10_1_3.ap653app.us.oracle.com
Setting variable 'iASinstanceName' to 'R1211XB9_WEBOH__d2_R12_ab_apps_R1211XB9_apps_tech_st_10_1_3'. Received the value from the variable calculation.
Setting variable 'iASOWSMPW' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'b_runOPatchGeneric' to 'true'. Received the value from the variable calculation.
Calling Query areasQueries10.1.0.4.0 productInstalled
location = /apps/ebs/PROD/prodora/10.1.3
etc
I cannot find where that R1211XB9 wrong path is coming from.
Thanks

Similar Messages

Question regarding App's for iPad and iPhone

Hi Folks, I have an iPad and iPhone 5 .....I also use the UK water company called United Utilities and I want to know if there is an App for the water company....
so I can access it quickly and keep an eye on my bill....
I welcome anyone assistance....
Cheers
Rosieglow

Any such app would be in the App Store. Have you searched? Have you looked at the company's website to see if they mention that they have an app?

Questions regarding Hard Drive and RAM upgrade

I just purchased a Macbook white (Late 2006 model) for my son off ebay. I know next to nothing about hard drives and RAM.
I only paid $400 for this thing so I'm willing to put some extra cash into it.
What is the maximum hard drive I can put in this thing? Also, does the size of the hard drive depend on the amount of RAM I can put in it?
Like I said, I dont know very much about this stuff at all. Could someone please give me specific examples of the size hard drive & RAM I can put in.
Thank you.

Replacing the Hard Drive and RAM is very easy. Apple has a PDF file with instructions for replacing a hard drive and RAM. You'll need a #0 phillips screwdriver for the "L" bracket and a Torx 6 driver for the caddy screws.
http://manuals.info.apple.com/en/MacBook13inch_HardDriveDIY.pdf
http://manuals.info.apple.com/enUS/MacBook_13inch_MemoryDIY.pdf

Regarding APP with bank transfer

Hi all,
Question regarding APP.
I know how to configure APP payment through check.
1. How does a vendor know when I run APP?
2. Can any one please explain me if I want to pay through BANK TRANSFER is there any additional configurations I need to do, if need what are they.
Please give me clear document if you have. I will be very thank full
Thank you

APP is not to intimate the vendor. APP will generate the payment advices which will be sent to bank for payment or Cheques will be generated through APP which are sent to Vendor.
To make payment through Bank Transfer in APP you must create another payment method by selecting the Bank Transfer as the payment method classification in OBVCU. Also maintain this method as other payment methods in vendor master records. Then you can use this payment method in F110.

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Question regarding to changing the region of the app with remaining balance

Question regarding to changing the region of the app with remaining balance
Hello, I am attempting to change the location of my app store which has remaining balance of 0.01$. In order to change the location of the store, it requires spending all the remaining balance. As my balance is too low " 0.01$" to buy an app from the store, I am not able to change the region of my app store. Moreover, Since I am not a residence in USA, I am not able to use my credit card either.
I am wondering if it is possible to change the location of my app store with a remaining balance OR to delete my current balance.
Thanks
Nejem

Click here and request assistance.
(85511)

Questions regarding upgrade from 4th gen to 5th gen iPod

I recently received a new 80 gig 5th gen iPod and had 2 questions regarding it and my old 40 gig 4th gen. PC meets minimun requirements and is running XP Pro.
1) Do I need to do anything before synching the new 5th gen iPod with my existing Library (i.e. uninstall iPod Updater for 4th gen)?
2) If I don't need to uninstall the 4th gen Updater, can I run both iPods off the same Library, same user (obviously not simultaneously)?
tia - joggy
N/A Windows XP Pro

Hey, joggy!
1) No, I don't believe you do. Be sure to disconnect the 4th gen iPod before connecting the 5th generation iPod to the computer.
2) Yes, you can.
There are basically two methods with managing muleiple iPods on one computer:
Method 1 - Create different Windows users accounts for each resgistered iPod on this computer.
Method 2 - Create a playlist in iTunes for each iPod.
To make Method 2 work, connect one of your iPods, and click on it in the left-source panel.
Under the "Music" tab, and set your option for a specific playlist(s) under the "Sync Music" option.
Do the same with your other iPod; not connected at the same time, though.
For more details on this matter, check out Apple's Support article about it:
How to manage multiple iPods using one computer
I hope that helps you.
-Kylene

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

Questions regarding *dump_dest parameters and fast_recovery_area

Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PM

Hi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     4
Next log sequence to archive   6
Current log sequence           6
SQL> show parameter recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size           big integer 4032M
recovery_parallelism                 integer     0
SQL> show parameter control_files
NAME                                 TYPE        VALUE
control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                     /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      ocpdb
SQL> show parameter db_name
NAME                                 TYPE        VALUE
db_name                              string      ocpdb
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
SQL> show parameter %dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Regarding downloading adobe cs4 and upgrade to cs6

I have a question>
Our cs4 design standard dvd which we purchased and burned out to a dvd is no longer as it should be.
But we like to install it again and update it to cs6.
How to do it without finding the cs4 dvd or anything online but avoid this issue?
Can we just download cs6 and do upgrade?

I have the 24 digitsd software keys, the invoice etc.If I just need to download the software. Where?
Date: Mon, 17 Dec 2012 07:06:29 -0700
From: [email protected]
To: [email protected]
Subject: regarding downloading adobe cs4 and upgrade to cs6
    Re: regarding downloading adobe cs4 and upgrade to cs6
    created by Bill@VT in Acrobat Installation & Update Issues - View the full discussion
Probably best to ask in the CS forum. If you still have the software keys for CS4, then upgrading to CS6 should work, but you need to check the upgrade policy on the Adobe Store to be sure. Generally you only need the software key to do the upgrade. If you do not have the key, then you may be up a creek unless you registered (as you should). If you registered, Adobe can likely help on getting you the keys needed for the upgrade. I suggest you confirm this in the CS forum.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4926971#4926971
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4926971#4926971
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4926971#4926971. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Question regarding the Transformation activity in BPEL

Hi,
I have a question regarding the Transformation activity in BPEL.
I have a database adapter that uses a PL/SQL API. The API returns two tables of nested objects and it automatically generates a schema for me based on the outputs structure. I need to use the Transformation activity to map both these out parameters to root element in the destination.
The element in the destination is "unbounded". Please take a look at the following screen shot -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1.gif
From the screen shot, you can notice that I have two XML segments X_TEST_TBL and X_TEST_TBL1 in the source and I have one GLOGXMLElement ("unbounded") in the destination. I need to map each of the source elements to the same destination. Then internally, I will be mapping the elements of X_TEST_TBL to "Location" segment/element and the elements of "X_TEST_TBL1" to "ItemMaster" segment/element. If I try to use "foreach" and map second
element "X_TEST_TBL1" also GLOGXMLElement using the foreach, I get the following error -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1_error.gif
Let us say my X_TEST_TBL contians two records and X_TEST_TBL1 contains one record. Is there any way that I can use these two out parameters to map to the same destination (GLOGXMLElement) so that my final document contains multiple "GLOGXMLElement"s that represents data from both the output parameters? i.e. there should be in total of three occurances of GLOGXMLelement in the output document such that two occurances correspond to data obtained from X_TEST_TBL and one corresponds to data from X_TEST_TBL1.
Please let me know if there is any way to achieve this.
Thanks
Ravi

Is the listed $200 credit towards a trade-in on top of the original trade in value of a phone, or the maximum amount?

Question regarding apps 10.1.3 upgrade to 10.1.3.5

Similar Messages

Maybe you are looking for