Question regarding firmware reset and provide the Hash to the advisor assisting you.

Hash:  C0224060G9GF1YM1H45B4D010997AAEBE

This is not Apple Support, and no one here knows anything about your contact with Apple.

Similar Messages

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Reset and Reverse the partial payment/receipts

    Dear Friends
    kindly advise me how to reset and reverse the partial payemnt/receipts
    Thanks
    Regards
    Madhu

    Hi
    use the FBRA transaction code for reset and reverse the payment document.  give the payment document number in FBRA transaction after execution system will give the message "reset" or reset and reverse"  select as per your requirement.
    hope this will solve your problem.
    Regards
    Ram

  • Few questions regarding Oracle Scorecard and strategy management.

    Hi,
    I have following questions regarding Oracle Scorecard and strategy management:
    1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
    2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
    3. Does Scorecard and strategy management have ability to retain history on feedback and log of
    entries i.e. date/time, user name?
    4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
    Thanks in advance for your help.

    bump.

  • I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    Do you have a question? Is your iPad disabled?
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I got a question regarding running iOs and Windows using virtual software.

    Greetings!
    I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
    Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
    Any information would be appreciate it!

    That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
    Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
    Good luck with your installation.

  • MOVED: question regarding CPU temps and latest bios (1.8)

    This topic has been moved to AMD64 nVidia Based board.
    question regarding CPU temps and latest bios (1.8)

    I'd believe the first bios's temps more than the second...  
    However what temps are given when using speed fan and/or everest? (in windows)

  • Hi,  For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your pas

    Hi,
    For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
    The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
    It's been working fine otherwise. Any suggestions?
    This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
    Thanks in advance for any help,

    Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
    If so reboot your iPhone and enter the passcode to get it operational.  Launch Image Capture on the Mac and connect the iPhone.  Now you should be able to download the video files to wherever you want on your hard drive. 
    OT

  • TS1702 Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    That's a peculiar one to get in the context of a QuickTime uninstall.
    Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?)

  • I made resetting and then the ipad could not be working, its just the apple on the screen

    I made resetting and then the ipad could not be working, its just the apple on the screen
    Thank you in advance for your help
    Regards

    What type of reset were you doing, a soft reset via the home and sleep buttons, or a reset back to factory defaults ? Have you tried another soft reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. Problem: no Genius bar in India. Theories?

    I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. The problem with the simple solution: there's no Genius bar in India.
    Any idea what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My cpu stays on 3600 rpm. Therefore my fan are on 4800 rpm. Did a smc reset and al the other reset. Help me please. Apple cant help. I even clean the fan.

    My cpu stays on 3600 rpm. Therefore my fan's run at 4800 rpm. Did a smc reset and al the other reset. Help me please. Apple cant help. I even clean the fan.
    I have tried everything you can find on the net. From unplug the cable cord to cleaning fans. Smc reset en pram reset. Eeven more. Its a Intel imac 24 inch 2009. Help

    Hooray, I think I found a solution.
    Using terminal commands there actually is a way to force smcFanControl to set a tolerable max rpm for the CPU fan.
    WARNING:
    Be aware that this solution should only be used if you know what you're doing and you are absolutely sure the CPU fan on your iMac is indeed out of control.
    Forcing a low max speed on a healthy CPU Fan with fully functioning sensors can seriously damage your Mac. You have been warned.
    The solution:
    Install smcFanControl
    Go to the terminal and use these commands to regain control of your noisy iMac:
    /Applications/smcFanControl.app/Contents/Resources/smc -k F2Mx -w 12c0
    This will set the CPU Fan to max at 1200 rpm: (Oh yes!)
    To revert to standard settings use:
    /Applications/smcFanControl.app/Contents/Resources/smc -k F2Mx -w 3cf0
    This will set CPU Fan to max at the default 3900 rpms
    You might have noticed that the last 4 digits are the fan speed (in hexidecimal)
    Other fan speeds you can try:
    1100rpm = 1130
    1500rpm = 1770
    3900rpm = 3cf0
    Now all I need is a way to make the setting permanent. Anyone know how to run the above terminal command automatically on bootup?

  • "Keychain can provide the password so you don't have to type it"?, "Keychain can provide the password so you don't have to type it"?

    Hi, all,
    I quote from the Keychain Access Help: "Keychain can provide the password so you dont have to type it" .
    Please tell me:
    How does this work?
    What do I have to do to make this work on my MacBook Air, OS X Lion? I mean what do I have to open, click, enter etc..
    I will be very grateful. I have the greatest difficulty in remembering the several passwords I use, and it would be a boon if the OS would do this for me.
    If I have been too ambitious about the properties of OS X Lion, is there a third party program which can do this for me?
    roystonfrombrighton

    Mario_MM, thank you,
    But what I need and do not yet see, is:
    when a box appears with , say, an ID on top and a blank box below asking me to fill in the password - I do not want to have to type in the password, I want the password to already be in there, in text, or even in a line of dots, and then these entries to be accepted.
    Sorry to keep on about this, but your help would be appreciated.
    roystonfrombrighton

  • I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

    I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

    Try to install Adobe application Manager from below link and check
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

  • I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

    I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

    Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
    Go to System Preferences a open up the Users pane;
    On the left side of the pane, you shuold see Login Options;
    Enabled editing option clicking on the lock (it will ask your password);
    Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
    Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
    Select Enable Root Account (you can set a password, or not);
    Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
    Theorically, from this account you will be able to unistall the application.
    After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

Maybe you are looking for