Question regarding ipad 3 replacement via warrentee.

I have a question, basically my ipad 3 is glitching. It is a 64gb ipad 3, I am fairly positive apple will replace it for me. Considering I purchased the two year warranty. However I am wondering, Will they replace it with a newer ipad model? Or will I simply get a refirbused used ipad 3. Considering that they took the ipad 3 off the market, I was wondering what the replacement would be.
-thanks in advance to anyone who is able to help.

Its going to be the same generation and model as the one you have.
That is, while they no longer sell iPad 3s they surely have refurbished stock available for replacements.

Similar Messages

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

Question regarding warranty replacement WRT54GX2 ver 2

I purchaced new SRX200 model WRT54GX2 ver 2. It was determined by technical support after hour on the phone that unit was defective. I received replacement unit, which was Ver 1 Model. Is this standard procedure not to replace defective model with exact model purchased in store?

Hmmmmm... I don't think there's a way of knowing the version until the device is out of the box... the model number will always be in box... (e.g. WRT54GX2) but the version (e.g. WRT54GX2 v2) can only be found on the router itself... so same model number... just different version... (i think)....

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

Greetings I am an Iranian citizen I had a question regarding buying iPad Do you have a product that I want to send Iran

Greetings
I am an Iranian citizen
I had a question regarding buying iPad
Do you have a product that I want to send Iran?

You are not talking to Apple here. This is a user to user forum. Apple does not ship internationally. You can have someone purchase an iPad for you and ship it to you. Other then that, you do not have many options.

Questions regarding FaceTime: When I call someone, it rings but they can't answer and when someone calls me via FaceTime it won't even ring.

Questions regarding FaceTime: When I call someone, it rings but they can't answer and when someone calls me via FaceTime it won't even ring.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

Questions regarding hard disk replacement in MacBook Pro Early 2008 Edition

Hello -
You folks probably get this a lot but I have a MacBook Pro Early 2008 edition and would like to upgrade the base 200 GB 5400 RPM drive to a Seagate Momentus 7200.4 drive. I have a few questions regarding this, and would appreciate any feedback.
1) Does anybody know if installing a new hard drive in a MacBook Pro would cause the warranty to be invalidated? I don't believe a hard drive is considered a user replaceable part, at least from what I read, and I would like to know if replacing it myself would void AppleCare.
2) Does anybody have any experience with the Segate Montentus 7200.4? I'm interested in how reliable the drive is and how much heat it generates. I've quickly discovered that I can use my MacBook Pro as an oven in tight spots and would like to prevent it from cooking its own internals.
3 random) Does anybody know at what temperature the system actually overheats? I'm seeing 171 F and this is with smcFanControl turned up to the Higher RPM mode. I'm a little nervous when I'm running WoW and the system is averaging above 170 with smcFanControl totally cranked up to 6000 rpm.
Thanks everyone!

Thanks for that. I've had mixed results with both Seagate and WD, but less issues historically with WD. My experience with IBM/Hitachi makes is nearly impossible to recommend their products, so based on what I'm seeing the Western Digital Scorpio Black looks like the best bet. Do you happen to know if Apple will do hardware installations outside of warranty repair scenario's? Ripping open my only notebook to perform "involved" hardware maintenance is not something I'd prefer to do, even with my technical background.

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Question regarding cancelation of wireless contract and signing a new one

Hi, I have a question regarding my contract. My Cell was stolen 2 days ago ( Iphone 5) had it for about year and 2 months. now I have a dilemma when it comes on getting a new device. the rep told me she can offer me some S... phones for over $200 as a replacement or I to look up Amazon; Ebay and craiglist. I also don't want to pay a retail price for a brand new device. So I was thinking of cancelation of this contract paying the fee and signing up a new contract with a new device like Iphone 5s or Samsung Galaxy. My question is, are there any waiting periods for doing such a thing, or I could do it at the same time, ditch old contract and sign for new one.

I really want to take a closer look at your options, Filip.M. We definitely wouldn't want to see you cancelling out all the great history you have with us already. I have sent you a follow request here in the forum. Please access https://community.verizonwireless.com/actions to accept my request and follow me back so you can send me a private message with your name and mobile number so we can get started.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

Question regarding ipad 3 replacement via warrentee.

Similar Messages

Maybe you are looking for