Question regarding iphone and charger

Hello,
I have a scenario and 2 questions I would like to ask you
Scenario:
Iphone with 100% charged battery, iphone is still connected to laptop USB or wall power socket.
True or False:
a) the iphone draws power directly from the charger, the battery does not supply power to the iphone until the charger is disconnected.
b) the iphone draws power from the battery --> the battery draws power from the charger (laptop or wall)
Thanks in advance
Bogdan

The Apple hardware, iOS devices and MacBook Pros, charge until the battery reaches 100%. At that point the charging circuit shutsdown and the device operates on line or external power until the charge level drops to 93-95% by normal trickle down. At that point the charging circuit switches to charge the battery.
So, as long as you are not charging the battery, and still plugged in, the device will run off line power.

Similar Messages

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Question regarding MM and FI integration

Hi Experts
I have a question regarding MM and FI integration
Is the transaction Key in OMJJ is same as OBYC transaction key?
If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
Thanks

No, they are not the same. The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types. Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not. Account key BSX is not movement type dependent. Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
thanks,

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question regarding iPhone4 and iTunes issue

I posted this on iPhone main forum and no response- i am hoping that someone can shed some light for me...would be much appreciated
ok- so, i have an existing iTunes account (current version 9.2)- i previously had ONE device attached to it- my 3Gs that i upgraded to my iP4 with.
I did not wipe my 3Gs- as i sent it to my daughter who placed her SIM from her 3G into it- HOWEVER, since activating my iP4 the only phone that has been synched to my iTunes is the new iP4- i was able to transfer all of my 90 apps- FINE- but i have an issue with my audiobooks-I keep getting this message when i try to put any of my audiobooks onto my iP4:
"THE PHONE "JILL...." IS SYNCED WITH ANOTHER ITUNES LIBRARY. DO YOU WANT TO ERASE THIS IPHONE AND SYNC WITH THIS ITUNES LIBRARY? AN IPHONE CAN BE SYNCED WITH ONLY ONE (1) iTUNES LIBRARY AT A TIME. ERASING AND SYNCING REPLACES THE CONTENTS OF THIS iPHONE WITH THE CONTENTS OF THIS LIBRARY"
ummm, my question is: A) What other Library might they be referring to? It syncs fine on this one and only iTunes account i have had for years- B) i am concerned WHAT exactly will be erased and replaced??? What is the point of this message if the APPS on the phone are from my one and only library?
I originally thought that maybe i was getting this message because all of the audiobooks had been previously loaded onto my 3Gs and i did not care- as i had already listened to them. BUT I just paid $26 for a new audiobook from iTunes and want it on my iP4- and it STILL gives me this message...
ANYONE?

Do you have more than one user account in iTunes?
Sounds like you are logged into another account, one different from what you originally synced with.

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Question regarding IWDTree and context Value Node naming

Hi,
I have a question regarding the IWDTree / IWDTreeNodeType components.
I have a context looking like this:
Context
+ ResponseNode
    + PersonNode (1..1)
      + PersonAddressNode                    (empty node, placeholder)
      | + AdresNode (0..n)
      + PersonChildNode                      (empty node, placeholder)
      | + PersonNode (0..n)
      |   + PersonAddressNode                (empty node, placeholder)
      |     + AddressNode (0..n)
      + PersonParentsNode                    (empty node, placeholder)
        + PersonNode (0..n)
          + PersonAddressNode                (empty node, placeholder)
            + AddressNode (0..n)
The context represents a person, a person's address, and a person's children and parents with their respective addresses.
As a result, on different branches, a PersonNode and AddressNode can appear.
And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
Can you give an example how your tree should look like at runtime?

Questions on iPhone and ITunes

1. I took photo with iPhone and then sync with the iTune. Where can I get my photo on the PC?
2. I know that there is a back of my iPhone each time I sync with the iTune on the PC. However, How can I get and use the backup?
It seems that there are a lot of iTune files scattered around under "My Document" folder!
3. I'm going to install Windows on a new harddisk. How should I transfer the iPhone backup to the new system?

You cannot merge Apple ID accounts, that has never been supported.
You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

Question regarding battery and warranty

Hi all! I have a quick question about how and if my warranty applies to my battery. After about a year and a half of ownership (I have the three-year extended warranty), my battery has gone completely down the toilet. It wasn't a problem before, but this year I have to lug my T61p around a lot for lab work. My battery is now rated at... 39.75Wh when it shipped at 84.24Wh. This is a pretty drastic difference. In any case, I don't think that this is covered by warranty, but figured that I'd ask before I drop $180 on a new battery (ouch). And, speaking of, if my suspicions are correct, does anybody know where I might find a 9-cell battery for the T61p? All I'm seeing on Lenovo's website is the one for the N100... which doesn't... match very well. Yaknow.
Thanks a lot!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Is either of these appropriate? I'm wary of the one on Amazon, as there are other (off-brand) batteries that are advertised as being Lenovo ones (though those generally sell for a lower price). The other one just looks like I'll have to call up to buy it.
http://www.amazon.com/Lenovo-43R9255-ThinkPad-Notebook-Battery/dp/B001DX9EKA
http://affordablepcsupply.com/products/IBM/REF/42T4511.html
Thoughts?
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Question regarding selectOneMenu and PROCESS_VALIDATIONS(3) phase

Hi im a bit lost regarding selectOneMenu and how validation phase all works together.
The thing is that i have a simple selectOneMenu
<h:form id="SearchForm">
     <h:panelGrid columns="3" border="0">
          <h:outputLabel id="caseTypeText" value="#{msg.searchCaseCaseType}" for="caseType" />
          <h:selectOneMenu id="caseType" value="#{searchCaseBean.caseType}" style="width: 200px;" binding="#{searchCaseBean.caseTypeSelect}">
               <f:selectItem itemValue="" itemLabel="#{msg.CommonTextAll}" />
               <f:selectItems value="#{searchCaseBean.caseTypes}" />
          </h:selectOneMenu>
          <h:message for="caseType" styleClass="errorMessage" />
          <h:panelGroup />
          <h:panelGroup />
          <h:commandButton action="#{searchCaseBean.actionSearch}" value="#{msg.buttonSearch}" />
     </h:panelGrid>
</h:form>Now when i hit submit button i can see that the bean method searchCaseBean.caseTypes (used in the <f:selectItems> tag) is executed in the PROCESS_VALIDATIONS(3) phase. How come? I dont whant this method to be executed in phase 3, only in phase 6.
If i add the this in the method if (FacesContext.getCurrentInstance().getRenderResponse())
public List<SelectItem> getStepStatuses(){
     List<CaseStep> caseSteps = new ArrayList<CaseStep>();
     if (FacesContext.getCurrentInstance().getRenderResponse()) {
          caseSteps = getCaseService().getCaseStep(value);
     List<SelectItem> selectItems = new ArrayList<SelectItem>(caseSteps.size());
     for(int i=0; i < caseSteps.size(); i++){
          CaseStep step = caseSteps.get(i);
          String stepStatus = step.getStatus() + "_" + step.getSubStatus();
          selectItems.add(new SelectItem(stepStatus, step.getShortName()));
     return selectItems;
} Now i get a validation error (javax.faces.component.UISelectOne.INVALID) for the select field and only phase1, phase2, phase 3 and phase 6 is executed.
Im lost?

I see. Many thanxs BalusC. Im using your blog very often, and its very helpfull for me.
I changed now to use the constructor load method instead. But know im getting problem of calling my service layer (Spring service bean). Its seems they havent been init when jsf bean is calling its constructor.
Can i init the spring service bean from the faces-config file?
JSF Bean
    public SearchCaseBean() {
          super();
                //caseService need to be init
          if(getCaseService() == null){
               setCaseService((CaseService)getWebApplicationContextBean("caseService"));
          fillCaseTypeSelectItems();
          fillCaseStatusSelectItems();
.....faces-config
<managed-bean>
          <managed-bean-name>searchCaseBean</managed-bean-name>
          <managed-bean-class>portal.web.SearchCaseBean</managed-bean-class>
          <managed-bean-scope>request</managed-bean-scope>
          <managed-property>
               <property-name>caseService</property-name>
               <value>#{caseService}</value>
          </managed-property>
     </managed-bean>

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

Question regarding transfer and restore of iphone

Hi All, I just brought a iphone5 and i want to transfer my data from my current iphone4s to the iphone5, but i will still be using my iphone4s. As you guys know, every iphone will have a Name (General>About>Name). So my question is, after i do a restore from backup to my iphone5 and then change the Name, then plug in back to my PC and let the iphone5 sync with the New Name, will it overwrite my old backup or it will create another backup with the new Name?
I ask this is because i will be using both iphone, but want the data from iphone4s to be transfer to my iphone5, from here i want both iphone to have their own backup.
hope someone can help to clarify. Thanks.

Follow the directions here:
http://support.apple.com/kb/HT2109
iTunes will keep separate backups & treat each device separately.

Question regarding ScrollView and pageControl with multiple XIBs

Hi,
I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc. Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
I do hope that this makes sense. I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
Any help is most appreciated.
Thanks

Hi Ziximo, and welcome to the Dev Forums!
Ziximo wrote:
I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
No forgiveness is necessary. You came to the right place.
I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
In case it's useful to you, here's a thread which shows how to use the PageControl sample app as the template for what you're doing: [Re: Flipping through views help|http://discussions.apple.com/thread.jspa?messageID=10417960&#10417960].
My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc.
The advice you have from thomas-r is right on target, so I'll just try to add to that. Firstly, I think you may be making a diligent attempt at "top-down" design, which is commendable. However there's a dirty little secret that working programmers don't share with managers: Quite often we don't produce the functional specification until we get the code working.
In other words, thomas-r's reference to Murphy isn't an insult. That's just how software gets designed.
In general, the decision to make a new class should be based on encapsulation and re-usability. For example when you get a memory warning, you might want to release all of the resources required for a screen that isn't currently visible. If that screen and its controller can be fully regenerated from one nib, this can be an easy task.
As another example, say the top-level controller is an instance of your ScrollViewController class. If you limit that controller to managing the scroll view and page control, you'll probably have a class you can reuse the next time you need a paging scroll view. But if you pack the functionality for multiple content views into that same controller, the class will only be useful for an identical app.
.. or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
So, no, I would definitely not attempt to put all the control in one class. Yes, it's possible, but besides being bad practice, it's awkward to implement. For example, when you make a nib which is owned by a view controller, it's easy to connect that controller's outlets and action methods to controls which are defined in that nib. There are ways to connect controls to an object defined in another nib, but it's much more difficult. It's not a "natural" configuration, and that by itself should give us second thoughts about our design. On the other hand, if we make one giant nib which is owned by the top-level controller, memory management goes out the window. We would need to unload everything in that nib to gracefully handle a memory warning.
Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes ...
Yes. This gives us the reusability and encapsulation we want. The only remaining question is: "Do I need a separate controller class with it's own custom xib for each screen?". Well you may not. There could be two or more screens that are so similar (e.g. the same layout and functionality but with a different image) they can each use an instance of the same controller class and share the same xib.
I usually start with a different controller class and a different xib for each screen. Then, near the end of the project, I'll look at all those controllers and see if two or more are nearly identical. If so, I might get rid of one or more classes, and possibly one or more xibs as well. But I'd almost never assume I can merge two controller classes at the outset. If I did that, I might start adding kludges to the merged class as I found differences between the screens I hadn't seen earlier. When the merged class finally got too complex for anyone to maintain, the job of splitting it up might be nasty.
I do hope that this makes sense.
I think that's my line.
I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
If you've suceeded in getting the skeleton working--i.e. you're paging through blank screens, each with it's own vanilla controller/xib, without any bugs, I'd say you're more than ready for the question you're asking here. And it's a very good question.
\- Ray

Question regarding iphone and charger

Similar Messages

Maybe you are looking for