Question regarding iPhone4 and iTunes issue

I posted this on iPhone main forum and no response- i am hoping that someone can shed some light for me...would be much appreciated
ok- so, i have an existing iTunes account (current version 9.2)- i previously had ONE device attached to it- my 3Gs that i upgraded to my iP4 with.
I did not wipe my 3Gs- as i sent it to my daughter who placed her SIM from her 3G into it- HOWEVER, since activating my iP4 the only phone that has been synched to my iTunes is the new iP4- i was able to transfer all of my 90 apps- FINE- but i have an issue with my audiobooks-I keep getting this message when i try to put any of my audiobooks onto my iP4:
"THE PHONE "JILL...." IS SYNCED WITH ANOTHER ITUNES LIBRARY. DO YOU WANT TO ERASE THIS IPHONE AND SYNC WITH THIS ITUNES LIBRARY? AN IPHONE CAN BE SYNCED WITH ONLY ONE (1) iTUNES LIBRARY AT A TIME. ERASING AND SYNCING REPLACES THE CONTENTS OF THIS iPHONE WITH THE CONTENTS OF THIS LIBRARY"
ummm, my question is: A) What other Library might they be referring to? It syncs fine on this one and only iTunes account i have had for years- B) i am concerned WHAT exactly will be erased and replaced??? What is the point of this message if the APPS on the phone are from my one and only library?
I originally thought that maybe i was getting this message because all of the audiobooks had been previously loaded onto my 3Gs and i did not care- as i had already listened to them. BUT I just paid $26 for a new audiobook from iTunes and want it on my iP4- and it STILL gives me this message...
ANYONE?

Do you have more than one user account in iTunes?
Sounds like you are logged into another account, one different from what you originally synced with.

Similar Messages

  • Question regarding roaming and data usage

    I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
    I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
    If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

    Ann154 wrote:
    If you are getting charged to use the wifi, then it is possible.  Otherwise no
    Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free .   Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones)  So these charges, if any, will not show up on the verizon bill app.  Having it in airplane mode prevents all cellular data traffic so you should be fine

  • Question regarding MM and FI integration

    Hi Experts
    I have a question regarding MM and FI integration
    Is the transaction Key in OMJJ is same as OBYC transaction key?
    If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
    Thanks

    No, they are not the same.  The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types.  Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not.  Account key BSX is not movement type dependent.  Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
    thanks,

  • **question regarding 3G and wif**.

    I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
    Thanks

    You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

  • Question regarding Dashboard and column prompt

    My question regarding Dashboard and column prompt:
    1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
    2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

    Hi Toony,...
    I think there was another way of doing this...
    In the dashboard prompt go to Show option > select SQL Results from dropdown.
    There you need to write your Logical SQL like...
    SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
    Here.. Periods.Year is the column which is already exists in repository's presentation layer..
    and difference of date functionality is the code or formula of column which you want to show in drop-down...
    Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
    I think it helps you in doing this..
    Just check and inform me if it works...
    Thanks & Regards
    Kishore Guggilla
    Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

  • IPhoto and iTunes issues.

    Good Afternoon Everyone,
    I am having some problems with my iPhoto at the moment. I have over 15,000 images in the library, and they all appear in thumbnail format under their respective dates, however when I double click on any image between roughly image 6942 and 12428 to enlarge it and look at it on full screen, a blank window is all I see, there isn't even a thumbnail of it where it should appear in full size.
    Can anyone suggest what I could do to rectify this problem?
    I have archive and installed the original OS X discs, as suggested by an apple store rep and it hasnt fixed the problem.
    Also now iTunes gives me an error msg when I try to run it saying that it will not run with this version of OS after the reinstall. Previously, iTunes would not connect to the apple store either, and would not find the CCDB info when importing a new CD, and he also told me that an arch and inst would fix this.
    Maybe a couple of probs here, but the iPhoto is the most pressing I guess.
    I would appreciate any suggestions or knowledge!
    Cheers Trent.

    Trent
    Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window should open with the file selected. Does it?
    As to the iTunes issue, best to pop that one over to the iTunes forum:
    http://discussions.apple.com/forum.jspa?forumID=789
    Regards
    TD

  • Question Regarding MIDI and Sample Accuracy

    Hi,
    I have 2 questions regarding MIDI.
    1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
    2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
    I've looked through the manual, and couldn't find any specific answer to these questions.
    Thanks!
    Message was edited by: Matthew Usnick

    Ok, I've done some experimenting, and here are my results.
    I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
    Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
    I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
    SO.
    Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
    This is very good news, and glad I worked this out!
    (if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
    Message was edited by: Matthew Usnick

  • Question regarding homehub and Open reach router -...

    Hi all,
      I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
      I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
      Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
    Thanks, .

    Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white).  The HomeHub has its own power switch, the modem doesn't.
    There is something wrong if the HomeHub needs to be turned on before the modem.  As others have said, in general best to leave the modem on all the time.  You should be able to connect them up in any order, or together.  (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
    Check if the router can connect/disconnect from the broadband using the web interface.  Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • ITunes match question (manual sync and iTunes library)

    Hi all
    Just noticed that iTunes match is now avaliable in Denmark, and therefore I have a few questions that I can't seem to find answers for elsewhere.
    My situation is that I have all my music on a NAS (and on at USB backup drive). Some of the music is in 128 AAC and is 320 mp3.
    On my macbook pro I have all of my music converted til 128 AAC so I can fit all of my music on my iPhone (10000 songs). All my music on my iPhone is manage manually through iTunes. I normally 1) add it to itunes, 2) transfer it to iphone and 3) remove the music again from my iTunes library. I mostly just have an empty iTunes library (since i play music from my iPhone and my Sonos system) and just use iTunes for ripping CDs and editing of tags.
    Since my iPhone is running out of space, I thought it would be a good idea to have some of my music i iCloud (iTunes match). From what I've read it is not possible to have both music transfered manually from iTunes to my iPhone and at the same time accessing music from Itunes match? What I really would like is to have 20 GB on my iPhone with the rest avaliable through iTunes match (20 GB) for when I need it. Is this possible?
    My second and most important question is about the itunes library. What happens if I connect to iTunes macth and afterwards remove all my music from my itunes library? As I just explained I prefer my itunes library to be empty unless i want to transfer music to my iPhone.
    Hope you can help me with some answers?
    Thánk You.

    That info has not been released yet but to venture a guess, I doubt any extraneous info such as comments will be used.
    Also, iTunes Match will not use your tags to identify songs. Some algorithm will analyze the audio file to match.

  • IPad and Itunes Issue..please help

    Hi- i suddenly found yesterday that none of my apps in IPAD are working. And Itunes from my laptop disappeared. i tried to reinstall but it gives an error message of invalid E:\ drive. What could be the issue.Secondly is it possible that without synching the ipad with the itunes, the apps stop working because the itunes has disappeared from my laptop. please help

    However, I accidentally erased my account,
    How did you erase your account?  A lot of people would like to know.  No one has found a way of erasing an Apple id account.
    Robert

  • Windows 8 and Itunes Issues

    I just recently got windows 8. Event though I purchased new songs through itunes, I cannot access them now, nor can I transfer my songs from my ipod to my laptop. There may be compatibility issues with Windows 8 and itunes. Any suggestions?

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Win 7 RTM and iTunes Issues

    I read a bunch of these out there..but couldn't find one that was having the same issues...so i'm going to post...
    I have Win 7 RTM, iTunes and an iPhone.
    When i use iTunes my scroll function won't work (works in EVERY other program but iTunes). I have to click and drag to move up or down.
    Second is that when i dock my iPhone to synch it detects and charges it..but won't synch..i have to dock/undock it anywhere for 1 to 100 times for it to work. Also when i do connect it iTunes freezes anywhere from 75 to 90 seconds before working.
    Anyone else have the same issues? What did you do to fix it? (or can you!?)
    Thanks!

    To update -
    I tried different USB's both on the PC and on the monitor. No change
    I tried diffent cable - No Change
    I formatted C and installed the OS and itunes clean...no change.
    Well really it now won't synch at all..i have been trying every little for about 4 hours now and it won't synch..i have stoped/restarted every services that is associated with iTunes...it has to be a problem with iTunes...

  • Paypal and iTunes issue?

    Hello. I recently got an iPod Touch. Anyway, in the App Store, I went to buy BTD4 for $2.99. It said they were having issues. So I went into iTunes to try and buy it, and right before I did, it said that they would charge my default payment method. Mine is Paypal, and I only have 59 cents in it. I did NOT click buy now, but I'm still worried that they might charge Paypal and charge a fee in addition. Will it do this? It is not in my iTunes store history, or my Paypal history, and the button on both the app store and iTunes still say "buy now". Should I be worried and scramble to add funds to Paypal?

    Typically speaking paypal will automatically debit(charge) your default billing method the difference.  So in your case you have $0.59 in paypal and want to spend $2.99.  So your default billing method will be automatically billed (you set this up when you created the billing agreement with itunes/paypal) $2.40.  Now you should make sure that your billing method (IE a checking/savings account, credit/debit card) had available funds, but it should go through in a couple of days on its own.

  • Question regarding battery and warranty

    Hi all! I have a quick question about how and if my warranty applies to my battery. After about a year and a half of ownership (I have the three-year extended warranty), my battery has gone completely down the toilet. It wasn't a problem before, but this year I have to lug my T61p around a lot for lab work. My battery is now rated at... 39.75Wh when it shipped at 84.24Wh. This is a pretty drastic difference. In any case, I don't think that this is covered by warranty, but figured that I'd ask before I drop $180 on a new battery (ouch). And, speaking of, if my suspicions are correct, does anybody know where I might find a 9-cell battery for the T61p? All I'm seeing on Lenovo's website is the one for the N100... which doesn't... match very well. Yaknow.
    Thanks a lot!
    ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

    Is either of these appropriate? I'm wary of the one on Amazon, as there are other (off-brand) batteries that are advertised as being Lenovo ones (though those generally sell for  a lower price). The other one just looks like I'll have to call up to buy it.
    http://www.amazon.com/Lenovo-43R9255-ThinkPad-Notebook-Battery/dp/B001DX9EKA
    http://affordablepcsupply.com/products/IBM/REF/42T4511.html
    Thoughts?
    ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Maybe you are looking for