Question Regarding Mesh with 3702 and non AC ap´s

Hello!
quick question regarding MESH deployments with 2 different sorts of AP´s: AC and non-AC modells: If my 3702i is my root AP´s, and 3602i my MAP - will AC still work in 80Mhz, or will I have to switch to 40mhz (and thus crippling (???) AC performance?)
Not 100% sure on this... I *think* it should still work for the normal 802.11n connection, but I´m not sure if the 80mhz channel width (needed??) for AC, will cause the non-ac 3602i to be stranded?
Thanks alot for your insight!

Currently, my network DHCP server is a software based DHCP server. In reading over your post if I understood correctly it sounds like the managed switch would have its own hardware based DHCP server to assign IP addresses to those clients identified on the "external" VLAN. Did I understand that correctly or did misread something?
DHCP server will be software based, even though you defined it on your switch, it is DHCP service running on its OS.
I am configuring this setup for a small business application and will need to purchase a managed switch with 16 or 24 ports. Do you have any recommendations on a particular managed switch that will handle the VLAN configuration and include POE while keeping costs in mind.
In this forum, most of us discussed about Cisco enterprise grade wireless. Here is 2960X series switch detail, if you are interested
http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/index.html
You may need to check the pricing with your Cisco account manager or from a Cisco partner.
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

Beginner question regarding 32-bit mixing and mixdown workflow

Hello
I have a beginner question regarding 32-bit mixing and mixdown.
If I edit some 16Bit, 44.1kHz Stereo WAV Files and put them into multi-track view to do crossfades, how should I do the mixdown?
Audition shows me in multi-track view, that it is doing 32-Bit mixing.
Can I just mixdown to 16Bit, 44.1kHz Stereo without any dithering (as the files are 16Bit, 44.1kHz Stereo to begin with), or will I lose quality that way?
I will be performing a normalization to 96% to the mixdown and then split to tracks in Audition, as in the end I want to to have an audio CD.
I guess I could mixdown to 32Bit, then normalize and in the end save back to 16Bit, 44.1kHz Stereo WAV (with dithering, I suppose?), but I want to avoid any unnecessary converting steps.
Greetings

Any time you do any processing on a 16bit file in 16 bit only it will degrade the audio slightly due to rounding of the calculations. Working in 32 bit floating point (Audition's default) takes account of all bits generated due to processing.
So it is always best to work in 32 bit, even if your originals were 16, all the way through until the last stage of saving the files for CD burning. Any losses due to conversion will be insignificant against those due to working 16 bit.

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

What type of database operations effectd with Unicode and non unic

Hi Friends,
I want to know what type of database operations effects with Unicode and non Unicode Programing .
Thanks,
Ravi Kumar Mukkera

Hi ,
Check these links .
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtoot/docs/library/uuid/ff99cb90-0201-0010-e389

Thanks for the reply to my question regarding sound in iMovie and sending me the online links. however the online links are impossible to play as they upload too slowly with the result that the playing keeps stopping waiting for the content to catch up

Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lolly

Please continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this.

Lucreate not working with ZFS and non-global zones

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here... I'm experiencing the exact same issue on my system. Below is the lucreate and zfs list output.
# lucreate -n patch20130408
Creating Live Upgrade boot environment...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10s_u10wos_17b>.
Current boot environment is named <s10s_u10wos_17b>.
Creating initial configuration for primary boot environment <s10s_u10wos_17b>.
INFORMATION: No BEs are configured on this system.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10s_u10wos_17b> PBE Boot Device </dev/dsk/c1t0d0s0>.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <patch20130408>.
Source boot environment is <s10s_u10wos_17b>.
Creating file systems on boot environment <patch20130408>.
Populating file systems on boot environment <patch20130408>.
Temporarily mounting zones in PBE <s10s_u10wos_17b>.
Analyzing zones.
WARNING: Directory </zones/APP> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/APP-patch20130408>.
WARNING: Device <tank/zones/APP> is shared between BEs, remapping to <tank/zones/APP-patch20130408>.
WARNING: Directory </zones/DB> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/DB-patch20130408>.
WARNING: Device <tank/zones/DB> is shared between BEs, remapping to <tank/zones/DB-patch20130408>.
Duplicating ZFS datasets from PBE to ABE.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b> on <rpool/ROOT/s10s_u10wos_17b@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b@patch20130408> on <rpool/ROOT/patch20130408>.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b/var> on <rpool/ROOT/s10s_u10wos_17b/var@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b/var@patch20130408> on <rpool/ROOT/patch20130408/var>.
Creating snapshot for <tank/zones/DB> on <tank/zones/DB@patch20130408>.
Creating clone for <tank/zones/DB@patch20130408> on <tank/zones/DB-patch20130408>.
Creating snapshot for <tank/zones/APP> on <tank/zones/APP@patch20130408>.
Creating clone for <tank/zones/APP@patch20130408> on <tank/zones/APP-patch20130408>.
Mounting ABE <patch20130408>.
Generating file list.
Finalizing ABE.
Fixing zonepaths in ABE.
Unmounting ABE <patch20130408>.
Fixing properties on ZFS datasets in ABE.
Reverting state of zones in PBE <s10s_u10wos_17b>.
Making boot environment <patch20130408> bootable.
Population of boot environment <patch20130408> successful.
Creation of boot environment <patch20130408> successful.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 16.6G 257G 106K /rpool
rpool/ROOT 4.47G 257G 31K legacy
rpool/ROOT/s10s_u10wos_17b 4.34G 257G 4.23G /
rpool/ROOT/s10s_u10wos_17b@patch20130408 3.12M - 4.23G -
rpool/ROOT/s10s_u10wos_17b/var 113M 257G 112M /var
rpool/ROOT/s10s_u10wos_17b/var@patch20130408 864K - 110M -
rpool/ROOT/patch20130408 134M 257G 4.22G /.alt.patch20130408
rpool/ROOT/patch20130408/var 26.0M 257G 118M /.alt.patch20130408/var
rpool/dump 1.55G 257G 1.50G -
rpool/export 63K 257G 32K /export
rpool/export/home 31K 257G 31K /export/home
rpool/h 2.27G 257G 2.27G /h
rpool/security1 28.4M 257G 28.4M /security1
rpool/swap 8.25G 257G 8.00G -
tank 12.9G 261G 31K /tank
tank/swap 8.25G 261G 8.00G -
tank/zones 4.69G 261G 36K /zones
tank/zones/DB 1.30G 261G 1.30G /zones/DB
tank/zones/DB@patch20130408 1.75M - 1.30G -
tank/zones/DB-patch20130408 22.3M 261G 1.30G /.alt.patch20130408/zones/DB-patch20130408
tank/zones/APP 3.34G 261G 3.34G /zones/APP
tank/zones/APP@patch20130408 2.39M - 3.34G -
tank/zones/APP-patch20130408 27.3M 261G 3.33G /.alt.patch20130408/zones/APP-patch20130408

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here...The thread was locked because you were not replying to it.
You were hijacking that other person's discussion from 2012 to ask your own new post.
You have now properly asked your question and people can pay attention to you and not confuse you with that other person.

Service PO's with tax and Non servie pos without tax

Hi,
In my present process.For service (ME21N)PO'S withholdingtax is calculated and for non service PO's there is no withholdingtax calculated.
In standard sap PO's.Tax will be calculated for both service POS and non service PO's.
Can any guide me where the coding is done by which the system is calculating tax on service pos and no tax calculated on material pos.
It will be great help.if you can through some light.
Thanks
Hagi

Hi,
With respect to WHT, vendors can be classified into three categories
1) Service Vendors (subject to WHT)
2) Material Vendors (not subject to WHT)
3) Mixed vendors (WHT is applicable on services only)
Identifying the type of vendor needs the data from business only. There is no specific indication in SAP. In case of 1 & 2 type vendors there is no problem. Problem with type 3 vendors. Since WHT keys are updated at vendor level, during IV system withhelds the tax amount on entire invoice which is wrong since materials may also be there in that invoice. For this there is no standard solution by SAP.
We need to further identify vendors based on supplies with both services and materials. If the % of services & materials combination is more, it is better to create two seperate vendors for the same vendor, one as service vendor and another as material vendor and ask the vendor to give seperate invoices for services and materials. If it is very less %, while posting invoices just change the base amount against the WHT keys. This is the practice we implemented for our client.
regards,
mallik

11gR2 Post-Upgrade Questions Regarding tnsnames, listener, pwd, and init

Hello.
Am planning on upgrading a significant # of RHEL5 10gR2 RAC and non-RAC DBs to 11gR2 (11.2.0.3.1, specifically). The servers are still not available to me, but I have been poring on the install and upgrade documents as well as referencing several blogs of users who have done them. I have almost literally read the guides verbatim. I will be using the DBUS - not doing a manual upgrade. Since I cannot test of the upgrade yet, I have a few questions related to POST_UPGRADE actions in terms of the listener, tnsnames, password, and init files.
1.) The upgrade document indicates on p 3-24, "DBUA then proceeds to create new configuration files (parameter and listener files) in the new Oracle home." Will the init file (assuming spfile will be copied as we are using one everywhere now) have deprecated parameters REMOVED after it is copied over to the NEW/TARGET home?
2.) While the install/upgrade guides do not call for it, several blogs indicate that the tnsnames and password files should be copied over from the old/source DB network/admin location ($TNSNAMES/admin) to the new/target DB /network/admin location. Do I need to do this or with the DBUA also copy them over? If all 4 files (tnsnames/listener/spfile/password) are copied over, I am not sure why the document doesn't indicate this.
3.) Other than the spfile being copied over and modified, I don't see any difference between the old/source and new/destination copies of the listener, tnsnames, and password file. Do you agree?
I am just trying to figure out what really need to be copied over and what doesn't in lieu of the DBUA doing it for me.
Thank you all for your help. If I had HW to test this out, I would do it. In the meantime, I am writing the procedures to do the actual upgrade.
Matt

page 3-24 corresponds to following
http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#CHDDCBHG
which states
You must run the Oracle Net Configuration Assistant before running DBUA. See "Configuring the Listener When Upgrading from Oracle9i".
If you are upgrading an existing Oracle Enterprise Manager Database Control or if you are configuring a new Oracle Enterprise Manager Database Control for the new Oracle Database 11g release, then the listener must be running before upgrading Oracle Enterprise Manager. If DBUA detects that an Oracle Enterprise Manager upgrade or configuration is requested, and DBUA does not see a listener running, then it prompts you and starts the default listener in either of these cases.
running netca from new home results in creating a new listener.ora file, this could complain that listener is already used if the old listener is running with the same name or port (default 1521) taken.
I think the "+DBUA reloads the listener.ora file in both the old and new Oracle Database environments.+" which point c in that list has to be taken in context with the two previous points a, b, where the usecase is shown how services , entries are removed from one listener.ora file and added to another. So to make sure those services are started from the "now" correct home those listener.ora are reloaded.
If you look in the 11.1 upgrade guide this text is written as "DBUA removes the entry of the upgraded database from the old listener.ora file and reloads the listener of the old database." http://docs.oracle.com/cd/B28359_01/server.111/b28300/upgrade.htm#i1011982
If after the upgrade old oracle home is not used anymore (no database is running out of that) you can ignore the listener.ora on the old home.

Doubt about Agent Inbox with ERMS and NON-ERMS

Hi All.
We have configured both ERMS and NON-ERMS email receiving (to make some tests) and we verify that only the workitem generated by the NON-ERMS workflow (WS14000164) is shown in the IC Web Client Inbox. The workitem generated by the ERMS workflow (WS00200001) is shown only in the SBWP transaction. Is this right???
We believe that our agent inbox configurations are correct, because it is working fine for NON-ERMS emails.
There is some trick to make the generated ERMS workitens be shown in the IC Web Client Inbox?
Thanks in advance!!!

Hi Julio,
You will NOT be able to get the workitems created by the standard ERMS wokflow (WS00200001) into your inbox, because SAP's assumption is that ERMS precisely replaces manual inbox assignment work by some automation (Response Management).
Even if you add the ERMS task 207914 in transaction CRMC_IC_AUICOMM, this configuration will be made inactive by the workitem search-engine. You can observe this in method CL_CRM_IC_AUI_WI->IF_GENIL_SO_HANDLER~GET_LIST, around line 210:
read table lt_wflows with key object = co_erms_email_task into ls_wflows.
if ls_wflows is not initial.
delete table lt_wflows with table key object = co_erms_email_task.
endif.
If you still want to see ERMS WIs in your inbox, make a copy of WF WS00200001; in copy, replace task 207914 with your own one, that you add in trx CRMC_IC_AUICOMM. Deactivate triggering event of WF WS00200001; activate triggering event of your own one. No changes in SO28 necessary.
But you may then think about what should happen when one wants to postprocess an ERMS WI displayed in inbox; because some ERMS processing may already have taken place: incoming e-mail may already have been linked automatically to an existing service ticket. You should then support easy navigation to that ticket, and forbid e-mail is linked again manually.
Hope this makes topic clearer
Kind regards
Walter

Zipping a folder with empty and non empty subfolders

Hello everybody there,
Right now i am facing the difficulty to zip a folder which is having some empty and non-empty folders within it.
Can anyone suggest me what to do.
I want to do it with java.util.zip package

Hello, Omke.
I will follow your suggestion and try to request this feature for a future release of Bridge. One thing I thought was that perhaps this is something that could be accomplished with a script. I have seen a few interesting scripts in Adobe's Exchange web page, John Nack's web site and also on Peter Krogh's DAM useful web site. Some of the scripts I have seen on these sites perform tasks that are far more complex (or so they seem) than it would be to simply display the number of images next to each folder.
Good point about what number to display. My folder hierarchy is quite simple. All I have is a main photos folder and inside this folder I have numerous others, each corresponding to a photo shoot/location. In my specific case the number next to each folder would correspond to the number of images in the folder not counting other files whether hidden or not (things like bridge cache, sidecar files and others would not be included in the number).
How easy or difficult would it be to find someone experienced enough with Bridge scripting so as to suggest this project ? What would be the best place to post such a suggestion/request ?
Thank you again for your reply and helpful answer.
Best regards,
Joseph

Filter Data with Merged and non merged columns in one

Hi there,
I have an excel spreadsheet that has got merged and non merged columns. What I want to be able to do is, filter a row that has got merged column and non merged columns. But when I filter it only takes the first line, rather than the merged and non merged
columns.
With this data I have one merged column which spans 6 rows, and then in the same row I have 6 rows with different points in, and what I want to do is filter my list, but be able to see the merged coloum aswell as the 6 points.
Any ideas are much appriciated.
Cheers
SAN

You cannot filter across a row - so I have assumed that what you mean is that some cells in columns are merged to serve as the headers, and the data is in the came columns but in the row(s) below the header. If this is incorrect, ignore this post.
For this example, I have assumed E to J are the column of data and merged cells, column K is free, and the first merged header is in row 1:
In K1, enter
=E1
in K2, enter
=IF(COUNTA(E2:J2)=1,E2,K1)
and copy down. Then filter based on column K, and it will show the headers and the data for the selected header value.
HTH, Bernie

Contacts and Calendar with iCloud and non-iCloud devices

I have a mix of non-iCloud and iCloud devices and macs, both at work and at home. Calendar has continued to sync correctly between all devices, however contacts is definitely not syncing between iCloud and non-iCloud devices. Bookmarks are also not coming across from iCloud devices to non-iCloud macs. Mail is working fine. I'm surprised that there is such variation in core apps. I would have expected iCal and Address Book to both work (or not work), but this seems not to be the case.
Keen to know if this is the norm for other uses of mixed environments?

I have a Macbook. Mac OS X 10.5.8. And an iPhone 4, as well as an iPad 2 - both on iOS 5.
There is a really really annoying and silly issue with syncing contacts and calendars across my Mac using iTunes (cable) and the iCloud options when my Mac does not support iCloud.
When I create / amend a contact or an event on my iOS device, if I choose (or more likely than not, the default option) "iCloud" for my contacts / calendar, the creation or amendment does NOT appear in my MAC even when syncing over cable with iTunes.
I have to choose ONE to edit - either the iCloud version OR the "from my Mac" version.
This is extremely annoying and silly - so much for Apple's seamless integration of products.
Of course, the easiest way out (and I am assuming Apple's preferred option) is to
(1) get a new Macbook Pro / Air that has OS X Lion which has iCloud inbuilt. - but that is just wasteful as my Macbook is still running flawlessly. (until now)
Or to do the unthinkable and tinker with electronics when you are totally clueless (like I am) and to
(2) upgrade to Snow Leopard and then to Lion - yeah right... have you friggin read those reviews?!?!
Is Apple intending to solve these issues for the non iCloud / iCloud group of users and make the Apple experience better again?
Or just because the company is doing great financially, and selling more products more than ever, and yet still have huge huge markets to conquer, gonna just ignore the above issues and just wait for our patience to wear thin, and do (1) - buy yet another new product.
OR we could switch to android and samsung and PCs and what have yous... please do not make us make this choice!!!

Peer-Switch with vPC and non-vPC Vlan Port-Channels

Hi,
in a design guide i have noticed that it is best practice to split vPC and non-vPC vlans on different inter-switch port-channels. Now, if i want to use the Peer-Switch function, but the port-channel interface of the non-vPC-vlan channel moves into blocking state. The option spanning-tree pseudo-information has no influence. Is peer-switch possible in my kind of topology?
Greeting,
Stephan

I believe absolutly possible. specifically coz peer-switch and spt pseudo-info are specific and local to cisco fabric services running as part of vpc technology. Personally me has lab with vpc-domain compounded of 2 N5Ks. They are peer-switches with spt-pseudoinfo and they have MST running on non VPC links independantly from vpc.

Question Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.

LQuestion Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.0 Hello All,
I need help on this.
I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
However, I have some problems.
. In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
Thank You

AnyOne?

Questions regarding SPNego with ADS

Hello Michael,
I don't really understand why you like to be able to login as UME Administrator. Why don't you provide the necessary permissions to the user you use for kerberos login?
Regarding point 2: yes, you are reauthenticated. Some similar issues have already been discussed a lot of times in the past in SDN forum. Please check via search if you can find a solution. By the way: there is a discussion of how to bypass spnego just some days ago: /thread/964827 [original link is broken]
Regards
Anja

Hello all
Sorry I asked stupid questions that are already answered somewhere within SDN.
I'd like to use SPNego- together with BasicPassword-Authentication because there will be e.g. external users with access to the Portal. Additionally, the Portal is also accessible from Intra- and Internet, so the users are able to access time & vacation management from their non-domain devices, e.g. home-PCs or mobiles. These devices are of course not in the Domain and it may be hard to emphasise the benefits of SPNego-Authentication within the company if the user has to enter his credentials twice if he logs in from another location.
The link mentioned by Anja refers to a solution that involves custom LoginModule coding to check whether a user is in the internal network. Unfortunately it seems this is the only solution at the moment.
BR
Michael

Question Regarding Mesh with 3702 and non AC ap´s

Similar Messages

Maybe you are looking for