Question regarding OAM - Dashboard - Critical Activities

Hi All,
R12.1.3
Rdbms 11.2.0.2
I have a question regarding OAM -> Dashboard -> Critical Activities.
How do you set up purges jobs to be displayed on that jsp page?
It should be display under Critical activities - Purge - FND.
(reference: websiminar Tuning All Layer of ebs, slide #16).
Thank you,
Felix

I already have the list of programs displayed under that page.
You should find a "Modify Monitored Program List" button in the same page, click on it and add the program(s) you want to monitor.
Overview of Monitoring Oracle E-Business Suite -- Applications Dashboard - Critical Activities
http://docs.oracle.com/cd/E18727_01/doc.121/e12894/T202991T221119.htm
Thanks,
Hussein

Similar Messages

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Question regarding Command pattern

Hi!
I have a question regarding the Command pattern:
//Invoker as defined in GOF Design Patterns
public class SomeServer {
    //Receiver as defined in GOF Design Patterns.
    private Receiver receiver;
    //Request from a network client.
    public void service(SomeRequest request) {
        Command cmd = CommandFactory.createCommand(request);
        cmd.execute();
}The concrete command which implements the Command needs a reference to Receiver in order to execute it's operation but how is the concrete command best configured? Should I send Receiver along with the request
as a parameter to the createCommand method or should i configure the receiver inside the CommandFactory or
send it as a paramter to the execute method? Since SomeServer acts as both client and invoker, SomeServer "knows" about the Commands receiver. Is this a bad
thing?
Regards
/Fredrik

#!/bin/bash
DATE=$(date '+%y-%m-%d')
if find | grep -q $DATE ; then
echo "OK - Backup files found"
exit 0
else
echo "Critical - No Backups found today!"
exit 2
fi
should work too and it's a bit shorter.
Please remember to mark the thread as solved.

OAM dashboard is not loading but forms performance is very good,why is it?

Hi
Once i login to our instance, OAM dashboard is not loading. Keep running,but forms, querying the db is excellent. How can i rectify this problem? Why it is hanging?
Regards

Ateeq,
I would suggest not to start troubleshooting the issue before bouncing the application services at this may do the trick. As you see, we have not got much details about the error in the log files, so this cannot help and the proper action would be bouncing the services and see if the issue is reproducible or not.
To list the running forms session, I believe the document referenced above should be helpful.
Regards,
Hussein

How see who is using or online with OAM dashboard?

Hi
Apps users who have system administrator resp granted,logged into instance and watching OAM dashboard but their sessions is not showing in user monitoring or forms sessions? How to findout from OAM dashboard that who is watching OAM dashboard?

Hi,
OAM dashboard page is not a form so I believe users who are connected to this page will not be listed under the forms sessions page. Please see (Note: 295206.1 - How to Count Total Number of Users Connected to ORACLE Application), there is a pointer about finding the users who are logged into Self Service Web Application.
Regards,
Hussein

Critical activities

Dear Gurus,
How can I display only the critical activities in the project planning board in the gantt chart.
If through the use of filter, pls list down the steps because, i tried but could not.
If there is any other way also, pls share. I think in CNS47 i can use the filter and get the list. But can i see it in planning board??
Regards,
VDS

Hi ,
Go to Project planning board then
Edit > Select > All WBS element
then
Edit > Show/Hide > Hide WBS element
Now there will be only activities on screen
Edit > Select > Aactivities
Now apply filter
Basic total float = 0
Execute
and then enter
Only activities with 0 float will be there those r critical activities.
Rgds

Several questions regarding File Vault

Hi!
I have several questions regarding File Vault - right now I'm using Mac OS 10.4.8
1.: The battery lock of my iBook is defect thus it happens from time to time that while transporting it the battery drops out while the laptop is sleeping. What happens with the File Vault-disk image?
2.: I want to (have to ) set up my Intel iMac again. The installer-CD I have will bring it back to 10.4.6
AFAIK the data format used for File Vault since 10.4.7 is version 2. What happens if I encrypt my stuff now (10.4.8 - thus version 2), back it up to my backup disc, install a new system (10.4.6 - therefore version 1) and want to access my data via Migration Manager (don't want to use archive and install)?
3.: How do I actually do a backup of my data while the system is running? The backup should be encrypted as well.
I use the demo-version of SuperDuper for backing up my system because with it I can ensure that I have a complete bootable backup of my running system.
Thanks for your answers in advance
ibook g4 12" 1.2 GHz 768 MB RAM / Intel iMac Core 2 Duo 17" 2.0 GHz 2GB RAM Mac OS X (10.4.8)

Parker,
You said:1. If it did, Apple would not use FileVault, as everyones computer will have a battery problem once in their life, and Apple would lose buisness from angry people who lost all of their data.I have seen enough reports of data loss with FileVault that I feel compelled to dispute your statement.
In Data corruption and loss: causes and avoidance, Dr. Smoke writes...If your data-security needs demand FileVault, you should backup your encrypted Home folder regularly, preferably daily. Like any hard drive or disk image, a Home folder protected by FileVault — an encrypted, sparse disk image — does not respond well to the causes of data corruption...Loss of power definitely is a cause of data corruption.
For Niels....,
An Unencrypted Look at FileVault, by François Joseph de Kermadec is an excellent discussion of the features, pitfalls, and cautions regarding Filevault.
Although the article discusses Panther and is dated 12/19/2003, the concepts as they apply Tiger have not changed.
The cautions and warnings are prominent in any of the Apple Knowledge Base articles referring to the use of FileVault. If a user is unfamiliar with any aspect of FileVault, it should not in my opinion be activated.
As good as FileVault is in protecting your sensitive data, it also presents the danger of locking up your files in an irretrievable ball of one's and zero's. Backups are critical. You must ensure that you have a comprehensive backup plan. Backup and Recovery, by Dr. Smoke is a fine example of what you need to consider.
;~)

Wiget question regarding system usage

I'm a recent convert from the PC world and am finding the dashboard feature very useful. I did, however have a question regarding the way wigets in the dashboard access the iMac's system resources.
Specifically, I was wondering if a wiget is installed and appears in the "Manage Wigets" list but is NOT active on the dashboard, does that wiget still utilize the system's resources? (i.e. is it still actively updating its information or performing its task) Or does it "sleep" until you actively enable it in the dashboard?

Welcome to Discussions!
I believe widgets don't consume resources unless you have them open in Dashboard-just having them installed, but not open wouldn't consume resources.
Since you're new to mac, you may want to check out Mac 101 and Switch 101.
Message was edited by: joshz

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Question regarding IWDTree and context Value Node naming

Hi,
I have a question regarding the IWDTree / IWDTreeNodeType components.
I have a context looking like this:
Context
+ ResponseNode
    + PersonNode (1..1)
      + PersonAddressNode                    (empty node, placeholder)
      | + AdresNode (0..n)
      + PersonChildNode                      (empty node, placeholder)
      | + PersonNode (0..n)
      |   + PersonAddressNode                (empty node, placeholder)
      |     + AddressNode (0..n)
      + PersonParentsNode                    (empty node, placeholder)
        + PersonNode (0..n)
          + PersonAddressNode                (empty node, placeholder)
            + AddressNode (0..n)
The context represents a person, a person's address, and a person's children and parents with their respective addresses.
As a result, on different branches, a PersonNode and AddressNode can appear.
And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
Can you give an example how your tree should look like at runtime?

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding MM and FI integration

Hi Experts
I have a question regarding MM and FI integration
Is the transaction Key in OMJJ is same as OBYC transaction key?
If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
Thanks

No, they are not the same. The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types. Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not. Account key BSX is not movement type dependent. Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
thanks,

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

Question regarding OAM - Dashboard - Critical Activities

Similar Messages

Maybe you are looking for