Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Similar Messages

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Question regarding MM and FI integration

Hi Experts
I have a question regarding MM and FI integration
Is the transaction Key in OMJJ is same as OBYC transaction key?
If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
Thanks

No, they are not the same. The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types. Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not. Account key BSX is not movement type dependent. Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
thanks,

A few questions on upgrade fee, overage charge on prorated bill, and data usage when phone is on WiFi

1st question, I bought 2 iPhone 4s's Dec 2011, unlimited plan which was up Dec 2013. April 19 2014, I bought 2 iPhones, 1 5c, 1 5s with the more of everything plan, which is not more of everything, it's far less then my old plan, but whatever. I got charged a total of $60 for a $30 upgrade on each phone. I'm not upgrading, my plan was expired, I bought 2 new phones and was forced into a new plan in order to get new phones, how is this an upgrade? Never been charged in all these years(early 2000's I became a customer) of being a loyal Verizon customer of an upgrade fee, unless I was upgrading my phone before the contract was done. If I was a brand new customer to Verizon would I get charged this upgrade fee?
2nd question, my bill cycle runs from the 24th to the 23rd, since I bought these new phones on the 19th, there were 5 days left to the billing cycle, so they prorated old plan and new plan. New plan is 1 GB, 5 days were prorated, I used in those 5 days between the 2 phones 371.77 MB, and I'm being charged for an overage of 206.61 MB of $15. Now my plan gives me 1 GB a month, that would be 1024 MB, I didn't go over this 1 GB in the month, so why am I being charged an overage for 5 lousy days?
3rd question, really 5 days and I used 371.77 MB's of data? Strange, didn't get the new phones until after 6pm on April 19th, yet I have all kinds of data charges on that day, when both phones were in my home, connected to WiFi the entire day. I spent the entire day online jerking around with 2 different Verizon employee's over getting new phones and a new plan in my home, on my computer, never touched my phone the whole day. Couldn't the day before I smashed the screen beyond use. So how on earth did I have all these data charges on that day? Now I could understand if I had, had the new phones earlier in the day, because there seems to be some strange glitch with these iPhone 5's were you use data, even when your phone is connected in your home to WiFi, but these were the 4s phones during the times of these data charges..
I'm not happy at all, first I got jerked around by 2 different Verizon employee's online, every option I tried they had some stupid reason why I could not do that and that I had to go with 1 option, I got so fed up, I didn't process my order online. I then turned around and went over to Sprint and spent time online with a Sprint employee, where I did not get jerked around, where I could have placed my order and then went to the store and picked up my phones right then. But no I was foolish, long time Verizon customer, happy with Verizon until this day, so I got in my car, drove to a store and spent an hour doing the whole process over with a nice friendly store employee(not a Verizon store). Now I get these upgrade fees, overage fee for 5 days of data service, where I was not over my monthly 1 GB, and all kinds of data charges appearing in the 5 days of the bill cycle on these new phones. Might not be much strange added on data to some, but in 2 years 4 months of the 4s iPhones, never used more then 1 GB a month and now so far I will exceed that 1 GB in this new billing cycle and by at least 1 GB, it would be 2 GB's except I shut one phone completely down and the other one is down to bare minimum, when nothing has changed in the way we are using our phones, and we are not using more data. I have now completely shut my phones cellular data off, I've turned it on in this billing cycle 6 times, bare minimum of only when I absolutely have to. The other phone, I can't do that with, and that phone is going through double, possibly triple the amount of data then the 4s, same user on both phones. I do now shut the cellular off of that phone when it comes into the house and it's not turned back on until it's out my door, so I will see if these strange data charges stop for when the phone is in the home hooked to WiFi. On top of that, I have shut down every app on that phone that is needed when WiFi can't be accessed, cellular is turned off except for 2 or 3 things. This is a bunch of garbage, I have 2 smartphones, and I have to shut them down and turn them into nothing but a normal old phone. What the heck is going on with this?

I will try to address your concerns - and explain why things are as they are ... you may not like the explanation but hopefully it will help you understand what has happened and what you can do moving forward.
I got charged a total of $60 for a $30 upgrade on each phone. I'm not upgrading, my plan was expired ... If I was a brand new customer to Verizon would I get charged this upgrade fee?
Verizon's definition of "upgrade" is purchasing phone at a discount and agreeing to a new contract - if you are a brand new customer, you pay a $35 activation fee. If you are an existing customer, you pay a $30 upgrade fee - this has been in place for about 2 years now.
2nd question, my bill cycle runs from the 24th to the 23rd, since I bought these new phones on the 19th, there were 5 days left to the billing cycle, so they prorated old plan and new plan. New plan is 1 GB, 5 days were prorated, I used in those 5 days between the 2 phones 371.77 MB, and I'm being charged for an overage of 206.61 MB of $15. Now my plan gives me 1 GB a month, that would be 1024 MB, I didn't go over this 1 GB in the month, so why am I being charged an overage for 5 lousy days? You only had the new plan for 5 days - pro-rating means you get about 34 MB per day, or about 170 MB for those 5 days. If you used 371, that a 200 MB overage. You likely were only charged for 5 days of the new plan as well...
... I have shut down every app on that phone that is needed when WiFi can't be accessed, cellular is turned off except for 2 or 3 things. This is a bunch of garbage, I have 2 smartphones, and I have to shut them down and turn them into nothing but a normal old phone. What the heck is going on with this?
My daughter recently upgraded from her iPhone 4 to a 5c - her data spiked and she used nearly 1 GB in the first week where that was about what she uses an entire billing cycle. We went through all her data settings and discovered she had about 10-12 apps (Facebook, Instagram, etc) that were updating all the time, connected to wifi or not. She shut most of those off and will open the app and update manually when she is on wifi. She downloaded and is using Onavo to manage her data and understand what gets used and when. I hope we have it under control, but the defaults on the iPhone 5 seem to turn on everything to update constantly, and that's just not a good thing.
It does seem the iPhone 5 series takes more work than any phone I've ever used to keep data usage manageable.

My iPhone 5s has no visual voicemail or regular voicemail and data usage is off the charts....

Okay so problem number 1 with my new iPhone 5s is data usage has spiked tremendously. I don't know why this is as for the last 2 years I have had an iPhone 4 and barely ever used 1GB a month. Now with my 2GB allowance I reached 90% used midway through the month. I have turned off the LTE and now have turned off cellular data completely and am only using wifi. I don't understand why my data usage has been so high this month since I am using my phone the same way. Is it the LTE?
My second problem is my phone has no voicemail. It tells me visual voicemail is unavailable and to call my voicemail. Except when I call my voicemail it asks me for a password. I have had my phone number for over 5 years and never had a password and now I can't get into my voicemail. I tried resetting the Network settings, that did not work. I have left my self voicemails and no notification even shows up. I called *86 to create a voicemail and it asks for a password which I never made.
I am EXTREMELY angry with Verizon's service at this point. I can not use my data until next month, and now I can't even receive voicemail messages. If someone could please tell me what is going on I would be appreciative.

To answer your first question, the answer is yes, it is the LTE. Your iPhone 4 could only connect to 3G and so therefore unable to transfer data as quickly as 4G on the 5s. So then you end up using more data than you have before.
And your second question. I am not sure as to why it's asking for a password if it never was before. You can reset your voicemail password if you log into your MyVerizon account. Hope that helps

ICloud sync and data usage

After upgrading my ATT iPhone 4 to iOS5, I thought I would try out iCloud. I read somewhere, that it only syncs when it is connected to a powersource, and maybe I read that wrong, but I interpret it to mean when I am connected to either a power outlet or my computer using the cable. In otherwords, it wouldn't sync while I was out and about, away from my wireless home network, using the 3G network.
Is this not correct?
Because 2 days ago I racked up 80 MB of my data plan (not iCloud storage) while I slept at home, where I have a wireless network. I found this out by getting a text warning from ATT the next day, that I was close to using up my alloted 200MB data usage. I checked out my account online, and sure enough the 80MB transferred in the middle of the night. I didn't notice the "documents and data" setting was turned on so it looks like my apps updated while my phone was in sleep mode. Is there anything else it could be? I have everything iCloud turned off now and wondering if there is something I should know about to avoid wasting my data usage?

elko wrote:
After upgrading my ATT iPhone 4 to iOS5, I thought I would try out iCloud. I read somewhere, that it only syncs when it is connected to a powersource, and maybe I read that wrong, but I interpret it to mean when I am connected to either a power outlet or my computer using the cable. In otherwords, it wouldn't sync while I was out and about, away from my wireless home network, using the 3G network.
Is this not correct?
Because 2 days ago I racked up 80 MB of my data plan (not iCloud storage) while I slept at home, where I have a wireless network. I found this out by getting a text warning from ATT the next day, that I was close to using up my alloted 200MB data usage. I checked out my account online, and sure enough the 80MB transferred in the middle of the night. I didn't notice the "documents and data" setting was turned on so it looks like my apps updated while my phone was in sleep mode. Is there anything else it could be? I have everything iCloud turned off now and wondering if there is something I should know about to avoid wasting my data usage?
I think possibly you are thinking about wireless sync of iTunes. That can be set to happen when you connect to a charger etc, but that is not the same thing as you are descrbing with iCloud.

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Question regarding IWDTree and context Value Node naming

Hi,
I have a question regarding the IWDTree / IWDTreeNodeType components.
I have a context looking like this:
Context
+ ResponseNode
    + PersonNode (1..1)
      + PersonAddressNode                    (empty node, placeholder)
      | + AdresNode (0..n)
      + PersonChildNode                      (empty node, placeholder)
      | + PersonNode (0..n)
      |   + PersonAddressNode                (empty node, placeholder)
      |     + AddressNode (0..n)
      + PersonParentsNode                    (empty node, placeholder)
        + PersonNode (0..n)
          + PersonAddressNode                (empty node, placeholder)
            + AddressNode (0..n)
The context represents a person, a person's address, and a person's children and parents with their respective addresses.
As a result, on different branches, a PersonNode and AddressNode can appear.
And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
Can you give an example how your tree should look like at runtime?

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

Deployment question for EMS and Data Objects

I have configured tens of EMS and data objects. It's deployment time to a new environment, say Dev to Test. Do i have to manually create all this data objects and EMS in each environment, or is it possible to write a script or deployment script to do it automatically for each environment. If not, it will be a headache configuring all these DO and EMS again for eah environment. Please suggest.
Thanks

See this guide: http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/testprod.htm#CHDDIEBI
Specifically on the usage of icommand in section 20.4.2

Question about voice and data plan for Europe

I am in New York and my boss is going to France for a week and a half. He told me he will not have access to the internet there. He asked me to find out if it would be possible to get a voice and data plan for the month that he will be there, and if so, could someone show me where I could look at the different plans available?
If it's not possible to do that for just a month, then could someone tell me where I could find the rates are for voice and data in France?
Thanks

Hi kevindrosario,
I appreciate your interest in our International Services. France, is a GSM country and will only support a Global capable device. Unfortunately, its not clear if your boss has a Global capable device. If so, here are the details for the voice and data rates for France.
If your boss doesn't not have a Global capable device, no worries! We offer an Occasional Global Traveler program, in which we will loan you a Global device for up to 21 days. I hope this information is helpful. Please let me know if you have any any additional questions or concerns.
Thank you,

Question regarding xsd and shredding

All,
I have the following xsd and xml file, I register the xsd in xmldb and create a resource from the xml file. Upon registration of the xsd, the proper (I think) tables are created and upon creating the resource the primary table seems to have a row in it. I am having a problem trying to figure out how to get the values out of the types that have the enumeration values. Any help would be appreciated.
$sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Aug 28 10:40:41 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
SQL> select * from V$VERSION
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for HPUX: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL>
xsd:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" xdb:storeVarrayAsTable="true">
     <xs:element name="ITEMS" xdb:defaultTable="TMP_ITEMS">
          <xs:complexType xdb:SQLType="TMP_ITEMS_T" xdb:maintainDOM="false">
               <xs:sequence>
                    <xs:element name="ITEM_GROUP" xdb:SQLCollType="ITEM_GROUP_ROW_NTT">
                         <xs:simpleType>
                              <xs:restriction base="xs:string">
                                   <xs:enumeration value="GROUP_A"/>
                                   <xs:enumeration value="GROUP_B"/>
                                   <xs:enumeration value="GROUP_C"/>
                                   <xs:enumeration value="GROUP_D"/>
                              </xs:restriction>
                         </xs:simpleType>
                    </xs:element>
                    <xs:element ref="ITEM" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="ITEM" xdb:defaultTable="TMP_ITEM" xdb:SQLType="TMP_ITEM_T" xdb:maintainDOM="false">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="ITEM_NUMBER" type="xs:string"/>
                    <xs:element name="ITEM_STATUS">
                         <xs:simpleType>
                              <xs:restriction base="xs:string">
                                   <xs:enumeration value="ACTIVE"/>
                                   <xs:enumeration value="INACTIVE"/>
                              </xs:restriction>
                         </xs:simpleType>
                    </xs:element>
                    <xs:element name="ITEM_DATE" type="xs:string"/>
                    <xs:element name="ITEM_ID" type="xs:string"/>
                    <xs:element ref="ITEM_SUBGROUP_1" maxOccurs="unbounded"/>
                    <xs:element ref="ITEM_SUBGROUP_2" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="ITEM_SUBGROUP_1" xdb:defaultTable="TMP_ITEM_SUBGROUP_1" xdb:SQLType="TMP_ITEM_SUBGROUP_1_T" xdb:maintainDOM="false">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="SUBGROUP_1_ID" type="xs:string"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="ITEM_SUBGROUP_2" xdb:defaultTable="TMP_ITEM_SUBGROUP_2" xdb:SQLType="TMP_ITEM_SUBGROUP_2_T" xdb:maintainDOM="false">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="SUBGROUP_2_ID" type="xs:string"/>
                    <xs:element name="SUBGROUP_2_TYPE">
                         <xs:simpleType>
                              <xs:restriction base="xs:string">
                                   <xs:enumeration value="SUBGROUP_TYPE_2_TYPE_A"/>
                                   <xs:enumeration value="SUBGROUP_TYPE_2_TYPE_B"/>
                                   <xs:enumeration value="SUBGROUP_TYPE_2_TYPE_C"/>
                              </xs:restriction>
                         </xs:simpleType>
                    </xs:element>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
</xs:schema>xml:
<?xml version="1.0"?>
<ITEMS xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="tmp_items.xsd">
     <ITEM_GROUP>GROUP_A</ITEM_GROUP>
     <ITEM>
          <ITEM_NUMBER>1</ITEM_NUMBER>
          <ITEM_STATUS>ACTIVE</ITEM_STATUS>
          <ITEM_ID>0000000123</ITEM_ID>
          <ITEM_SUBGROUP_1>
               <SUBGROUP_1_ID>SG1_000000987</SUBGROUP_1_ID>
          </ITEM_SUBGROUP_1>
          <ITEM_SUBGROUP_2>
               <SUBGROUP_2_ID>SG2_000000987</SUBGROUP_2_ID>
               <SUBGROUP_2_TYPE>SUBGROUP_TYPE_2_TYPE_A</SUBGROUP_2_TYPE>
          </ITEM_SUBGROUP_2>
     </ITEM>
     <ITEM>
          <ITEM_NUMBER>2</ITEM_NUMBER>
          <ITEM_STATUS>INACTIVE</ITEM_STATUS>
          <ITEM_ID>0000000456</ITEM_ID>
          <ITEM_SUBGROUP_1>
               <SUBGROUP_1_ID>SG1_000000654</SUBGROUP_1_ID>
          </ITEM_SUBGROUP_1>
          <ITEM_SUBGROUP_2>
               <SUBGROUP_2_ID>SG2_000000654</SUBGROUP_2_ID>
               <SUBGROUP_2_TYPE>SUBGROUP_TYPE_2_TYPE_A</SUBGROUP_2_TYPE>
          </ITEM_SUBGROUP_2>
     </ITEM>
</ITEMS>registration of xsd:
BEGIN
IF DBMS_XDB.CREATERESOURCE(
     abspath => '/public/tmp/tmp_items.xsd',
     data    => BFILENAME ('XSD_DIR','tmp_items.xsd')
THEN
     DBMS_XMLSCHEMA.REGISTERSCHEMA(
        schemaurl => 'tmp_items.xsd',
        schemadoc => sys.UriFactory.getUri('/public/tmp/tmp_items.xsd')
     COMMIT;
END IF;
END;creation on xml resource:
declare
   v_return BOOLEAN;
BEGIN
   v_return := DBMS_XDB.CREATERESOURCE(abspath => '/public/tmp/tmp_items.xml', data => BFILENAME('XML_DIR', 'tmp_items.xml'));
END;query the high level:
select xml.item_number                  as item_number,
         extractvalue(value(i),'/ITEMS/ITEM_GROUP') item_status
from tmp_items i,
       table(i.xmldata.item) xmlquery the sub_group for one high level:
select *
from table(
select xml.ITEM_SUBGROUP_2
from tmp_items i,
       table(i.xmldata.item) xml
       where xml.item_number = '1')When I execute the above query, I can't seem to extract the value out of the subgroup_2_type element. I used the extractvalue function to get it out of the high level, but can't seem to get it right here.
Thanks
Eric
Edited by: Eric Schrauth on Aug 28, 2012 8:39 AM

Have to create a base view on the elements that will always be there and other views on the items that might not and query them appropriately. Right?Not necessarily.
The usual approach is to use an OUTER JOIN :
SELECT x1.item_number
     , x1.item_status
     , x2.*
FROM tmp_items t
   , XMLTable(
       '/ITEMS/ITEM'
       passing t.object_value
       columns item_number     varchar2(15) path 'ITEM_NUMBER'
             , item_status     varchar2(15) path 'ITEM_STATUS'
             , item_subgroup_2 xmltype      path 'ITEM_SUBGROUP_2'
     ) x1
   , XMLTable(
       '/ITEM_SUBGROUP_2'
       passing x1.item_subgroup_2
       columns subgroup_2_id   varchar2(15) path 'SUBGROUP_2_ID'
             , subgroup_2_type varchar2(15) path 'SUBGROUP_2_TYPE'
     ) (+) x2
;Or the equivalent with ANSI JOIN :
SELECT x1.item_number
     , x1.item_status
     , x2.*
FROM tmp_items t
   , XMLTable(
       '/ITEMS/ITEM'
       passing t.object_value
       columns item_number     varchar2(15) path 'ITEM_NUMBER'
             , item_status     varchar2(15) path 'ITEM_STATUS'
             , item_subgroup_2 xmltype      path 'ITEM_SUBGROUP_2'
     ) x1
   LEFT OUTER JOIN
     XMLTable(
       '/ITEM_SUBGROUP_2'
       passing x1.item_subgroup_2
       columns subgroup_2_id   varchar2(15) path 'SUBGROUP_2_ID'
             , subgroup_2_type varchar2(15) path 'SUBGROUP_2_TYPE'
     ) x2
     ON 1 = 1
;

Question regarding battery and warranty

Hi all! I have a quick question about how and if my warranty applies to my battery. After about a year and a half of ownership (I have the three-year extended warranty), my battery has gone completely down the toilet. It wasn't a problem before, but this year I have to lug my T61p around a lot for lab work. My battery is now rated at... 39.75Wh when it shipped at 84.24Wh. This is a pretty drastic difference. In any case, I don't think that this is covered by warranty, but figured that I'd ask before I drop $180 on a new battery (ouch). And, speaking of, if my suspicions are correct, does anybody know where I might find a 9-cell battery for the T61p? All I'm seeing on Lenovo's website is the one for the N100... which doesn't... match very well. Yaknow.
Thanks a lot!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Is either of these appropriate? I'm wary of the one on Amazon, as there are other (off-brand) batteries that are advertised as being Lenovo ones (though those generally sell for a lower price). The other one just looks like I'll have to call up to buy it.
http://www.amazon.com/Lenovo-43R9255-ThinkPad-Notebook-Battery/dp/B001DX9EKA
http://affordablepcsupply.com/products/IBM/REF/42T4511.html
Thoughts?
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Question regarding roaming and data usage

Similar Messages

Maybe you are looking for