Question regarding templates

I am currently reading the JDeveloper Handbook, and one of the first things it has me do in Creating the Application Workspace is to select the "Java Application [Default]" template; and this template utilizes ADF Business Components and ADF JClient.
The questions I have with this are that:
a) I don't have a Java Application [Default] selection in the dropdown nor when I look in 'Manage Templates'
b) Even when I look in Manage Templates, I don't see anything that looks like ADF JClient.
Is this something where the name changed, or do I need to download something to add to the JDeveloper install [like an add-in or such].
I am obviously new to this, so any help would be appreciated. If this build information helps, this is what I have:
Studio Edition Version 10.1.3.1.0.3984
Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984
ADF Business Components     10.1.3.39.84
Thanks.
Matt

The names have changed since version 10.1.2 (for which the book you are reading was written) - now it is Java Application [Swing, ADF BC]
By the way, if this one doesn't appear in your version make sure you are using the studio edition of JDeveloper and not another one.
Some more up to date books are here:
http://www.oracle.com/technology/products/jdev/collateral/training10g.html

Similar Messages

  • Follow up question regarding templates - editing modules

    Hi lads
    I am using the church template site to re-build the following site www.mountmellickdevelopment.com and I was just wondering, in the modules that u created in the church template.. How do i go about editing the header module say to make the height bigger plus the people on the board of management want to see what the header looks like with the following words ether side of the logo "Mountmellick" on left and "Deveelopment" on the right, here is the trial site address Home
      I've looked through the stylesheets and the different CSS but can't seem to find the right code.. etc
    Fergal

    adame wrote:
    rallocs: 563
    pending sector: 55
    etc.
    Your drive is probably toast. Compare your SmartData stats with mine:
    Retracts: 844
    *Reallocs: 12*
    *Pending Sectors: 0*
    PowerOn Hours: 2037
    Starts/Stops: 830
    Temp: Current 29c
    Temp: Min 10c
    Temp: Max 50C
    I've only 12 remapped sectors and none pending. From the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    I'm sure you'll find the counts go up if you try to do a surface scanning disk check. Sorry it's not better news but at least you know where the problem lies. Assuming your iPod is out of warranty it's probably time to get your iPod refurbished with a new drive or to buy a new iPod.
    tt2

  • Question regarding Request Notification Template - OIM 9.1.0.2

    Hi All,
    I have a question regarding notification generated when a request is raised. Currently, the body of the notification is referring the requestor who raise the request (the body of email has attributes like <%Requester Info.First Name%>, <%Requester Info.Last Name%>). Its fine if the requestor is raising the request for him/her self. However, if the requestor is raising the request on behalf of another user, then this notification is causing confusions, since its referring the requestor only in its body and not the beneficiary.
    Is there a way to include the end beneficiary's details in the body of the notification?
    Please help in this regard
    Regards
    Vinay

    Hi Gurus,
    Any idea on this?
    Regards
    Vinay

  • Question Regarding MIDI and Sample Accuracy

    Hi,
    I have 2 questions regarding MIDI.
    1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
    2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
    I've looked through the manual, and couldn't find any specific answer to these questions.
    Thanks!
    Message was edited by: Matthew Usnick

    Ok, I've done some experimenting, and here are my results.
    I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
    Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
    I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
    SO.
    Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
    This is very good news, and glad I worked this out!
    (if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
    Message was edited by: Matthew Usnick

  • Questions regarding *dump_dest parameters and fast_recovery_area

    Hello,
    I just installed a fresh new 11.2.0.2 Database on Solaris 10.
    Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
    With this, questions are popping in my mind regarding some parameters after installation.
    First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
    background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
    Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
    drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
    total 9528
    -rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
    total 3
    drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
    drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
    drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
    I want to know how to do it well before reinstalling a fresh database.
    Thanks
    Bruno
    Edited by: blavoie on Oct 31, 2010 6:18 PM
    Edited by: blavoie on Oct 31, 2010 6:20 PM

    Hi,
    I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
    oracle@enalab13:~$ echo $ORACLE_SID
    ocpdbFast recovery area directories, dates prove that it's my fresh install:
    oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
    drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
    oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
    fast_recovery_area/:
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
    drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
    fast_recovery_area/ocpdb:
    total 9528
    -rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
    fast_recovery_area/OCPDB:
    total 2
    drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
    fast_recovery_area/OCPDB/archivelog:
    total 1
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
    fast_recovery_area/OCPDB/archivelog/2010_11_02:
    total 47032
    -rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
    fast_recovery_area/OCPDB/onlinelog:
    total 0Some interresting output asked earlier in post:
    SQL> archive log list
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence     4
    Next log sequence to archive   6
    Current log sequence           6
    SQL> show parameter recovery
    NAME                                 TYPE        VALUE
    db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
    db_recovery_file_dest_size           big integer 4032M
    recovery_parallelism                 integer     0
    SQL> show parameter control_files
    NAME                                 TYPE        VALUE
    control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                         /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
    SQL> show parameter instance_name
    NAME                                 TYPE        VALUE
    instance_name                        string      ocpdb
    SQL> show parameter db_name
    NAME                                 TYPE        VALUE
    db_name                              string      ocpdb
    SQL> show parameter log_archive_dest_1
    NAME                                 TYPE        VALUE
    log_archive_dest_1                   string
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    SQL> show parameter %dump_dest 
    NAME                                 TYPE        VALUE
    background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
    user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
    Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
    Thanks
    Bruno

  • Question regarding homehub and Open reach router -...

    Hi all,
      I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
      I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
      Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
    Thanks, .

    Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white).  The HomeHub has its own power switch, the modem doesn't.
    There is something wrong if the HomeHub needs to be turned on before the modem.  As others have said, in general best to leave the modem on all the time.  You should be able to connect them up in any order, or together.  (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
    Check if the router can connect/disconnect from the broadband using the web interface.  Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • Question regarding roaming and data usage

    I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
    I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
    If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

    Ann154 wrote:
    If you are getting charged to use the wifi, then it is possible.  Otherwise no
    Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free .   Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones)  So these charges, if any, will not show up on the verizon bill app.  Having it in airplane mode prevents all cellular data traffic so you should be fine

  • Question regarding MM and FI integration

    Hi Experts
    I have a question regarding MM and FI integration
    Is the transaction Key in OMJJ is same as OBYC transaction key?
    If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
    Thanks

    No, they are not the same.  The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types.  Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not.  Account key BSX is not movement type dependent.  Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
    thanks,

  • **question regarding 3G and wif**.

    I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
    Thanks

    You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

  • Question regarding Dashboard and column prompt

    My question regarding Dashboard and column prompt:
    1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
    2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

    Hi Toony,...
    I think there was another way of doing this...
    In the dashboard prompt go to Show option > select SQL Results from dropdown.
    There you need to write your Logical SQL like...
    SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
    Here.. Periods.Year is the column which is already exists in repository's presentation layer..
    and difference of date functionality is the code or formula of column which you want to show in drop-down...
    Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
    I think it helps you in doing this..
    Just check and inform me if it works...
    Thanks & Regards
    Kishore Guggilla
    Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

  • Questions regarding customisation/configuration of PS CS4

    Hello
    I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
    Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions

    NyanPrime wrote:
    <answered above>
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions
    2.  No.  It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5.  It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
    3.  Not sure, since I haven't tried it.  However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
    4.  What buttons are you talking about?  Those you are creating in your document?  If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
    5.  There are many, many options for positioning and sizing panels.  Most start with making a panel visible, then dragging it somewhere by its little tab.  One of the important features is that you can save your preferred layout as a named workspace.  Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created).  The name of that menu is a little confusing.  Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
    You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
    As an example, I use two monitors, and this is my preferred layout:
    6.  No, it's not possible to affect the layer names Photoshop generates, as far as I know.  I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
    Hope this helps!
    -Noel

  • Question regarding ONT connection via Ethernet and Cable cards

    Hi,
    We recently upgraded to Fios Quation 150Mbps/65  plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
    I have 2 questions regarding this new setup:
    1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
    Quiestion 2.
    Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system  via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room. 
    Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct? 
    Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet?  and would this setup affect in any way the propper functioning of the cable boxes in the house?
    I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
    Cheers.
    Solved!
    Go to Solution.

    It's not valid to have two devices connected to the ONT, PC and VZ Router.  Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
    Other options:
    1.  Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
    2.  Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
    Hope that helps.

  • I have some questions regarding setting up a software RAID 0 on a Mac Pro

    I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
    These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
    A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
    The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
    Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
    It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
    My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
    I should be most grateful to receive advice regarding the following questions:
    QUESTION 1:
    I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
    If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
    Or would I have to reinstall the OS, applications and software again?
    I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
    QUESTION 2:
    I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
    Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
    Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
    QUESTION 3:
    Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
    Or would this not be of any use anyway, in the event of a single drive failure?
    QUESTION 4:
    Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
    QUESTION 5:
    If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
    Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

    Well said.
    Steps to set up RAID
    Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
    1. Open Disk Utility (/Applications/Utilities).
    2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
    3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
    4. Name the RAID set.
    5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
    6. Click Create.
    Recovering from a hard drive failure on a mirrored array
    1. Open Disk Utility in (/Applications/Utilities).
    2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
    3. If an issue with the disk is indicated, click Rebuild.
    4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
    5. Repeat steps 1 and 2.
    6. Drag the icon of the new disk on top of that of the removed disk.
    7. Click Rebuild.
    http://support.apple.com/kb/HT2559
    Drive A + B = VOLUME ONE
    Drive C + D = VOLUME TWO
    What you put on those volumes is of course up to you and easy to do.
    A system really only needs to be backed up "as needed" like before you add or update or install anything.
    /Users can be backed up hourly, daily, weekly schedule
    Media files as needed.
    Things that hurt performance:
    Page outs
    Spotlight - disable this for boot drive and 'scratch'
    SCRATCH: Temporary space; erased between projects and steps.
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    (normally I'd link to Wikipedia but I can't load right now)
    Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
    To help understand and configure your 2009 Nehalem Mac Pro:
    http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
    http://macperformanceguide.com/
    http://www.macgurus.com/guides/storageaccelguide.php
    http://www.macintouch.com/readerreports/harddrives/index.html
    http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
    http://kb2.adobe.com/cps/404/kb404440.html

  • Few questions on Templates and Favorites

    Experts,
    Few fundamental questions on Templates and Favorites...
    1) Can Favorites be shared with other users?
    2) Can Templates be transported across systems (Dev or QA or PRD) ?
    3) Can Templates be shared across planning area ( Yes, KF names are same across planning area?
    Any insights appreciated!!!
    Thanks
    Krishna

    Hello Krishna
    1. No, favorites are user specific and are not shared. Templates are.
    2. There are no transports in the traditional sense in S&OP. So a Template can't really be transported. What you can do, however, is open a Template in DEV, for example, then log off and log back on - just this time to QA or PRD. This assumes you have the same planning area, KF etc.in each system. Now you can add it to the templates in QA or PRD ... this is how you get it from one system to another.
    3. I believe they are not shared between planning areas. If you make a planning area copy, I think they might come over but if you built a new PA2 from scratch, the ones you have in PA1 won't be there. If you want to get a planning view template from one PA to another, you basically follow the steps as in my answer to your second question. Again, for sharing a planning view Template between Planning Areas the attributes, time profiel and key figures you use have to be the same.
    Hope this helps,
    Jens

Maybe you are looking for