Question regarding the factory SDRAM for 15" iMac Flat Panel G4 700MHz

Thank you for reading my post. =)
I upgraded my iMac to the max 1GB SDRAM a few years ago. When I did this, the Apple tech removed my factory installed SDRAM chip from the SODIM? slot and installed the SDRAM I bought into the two (inside and outside) slots.
I still have the factory SDRAM chip lying around, but I do not know nor can I seem to find any 411 regarding the factory SDRAM that was shipped with my computer. The factory chip I have doesn't say how much SDRAM it is, and now I can't remember what my computer shipped with. Does anybody have the same computer as me, and if so, do you know how much SDRAM was shipped with this specific iMac?
Another thing.. I am thinking about getting a used eMac or an iMac CRT for my mom. Does anybody know if this factory SDRAM chip will be compatable with certain eMacs and iMac CRT's? The chip says it's made by Samsung Korea, and it's PC133U-333-542. Does PC 133 SDRAM only belong in the 'outside' SODIM slot, or can PC 133 also go into the 'inside' slot.
I hope i'm making sense to somebody; I don't know if these are considered stupid questions, but I really need to know, so I'm asking. =)
Any help and advise is greatly appreciated! *april
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

Hi Chris CB, Yes, I was just told about MacTracker the other day... It's amazing, is'nt it! I know that information took a LOT of time to compile. I downloaded MacTracker the other day and am still amazed!! I wonder why Apple never did this themselves; them being the ultimate source and all.
Niel, thank you for coming back again.. I saw from reading your post and subsiquently from the links mrtotes provided that there are two user accessable RAM slots inside the iMac CRT. Very good news.. i'll definitely keep in mind that the slot loaders are easier than the tray loaders when making my decision as well. Thanks again!
(17590)
Cor blimey, mrtotes.. (not exactly sure what that means, but one of my British customers said that to me once and I love the way it sounds) =P Thank you so much for those two direct links. I think that eMac movie is on speed or something though.. it moves waaay faster than my mind can think! I'll definitely come back and reference those links when I make my final decision/purchase. PS Your direct links always make life so much easier.
*april

Similar Messages

I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens. If you know what's wrong please let me know.

Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6.

/*line 957 error */
     public void select()
          for (count = 0; count <= p; count ++ )
               if(P[count] != null){ /* validation */
               m = (int)(P[count].getX());
               n = (int)(P[count].getY());
               if (Math.pow(-1, m + n) == 1)
                    piece[m][n].setBackground(wselect);
               else
                    piece[m][n].setBackground(bselect);
          step = 2;
     }

The factory profile for the display could not be found.

Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
1) Download a copy of Plistedit Pro. It's shareware, so donate!
2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
I can now colour calibrate my iMac again. Phew!!!

Question regarding the Transformation activity in BPEL

Hi,
I have a question regarding the Transformation activity in BPEL.
I have a database adapter that uses a PL/SQL API. The API returns two tables of nested objects and it automatically generates a schema for me based on the outputs structure. I need to use the Transformation activity to map both these out parameters to root element in the destination.
The element in the destination is "unbounded". Please take a look at the following screen shot -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1.gif
From the screen shot, you can notice that I have two XML segments X_TEST_TBL and X_TEST_TBL1 in the source and I have one GLOGXMLElement ("unbounded") in the destination. I need to map each of the source elements to the same destination. Then internally, I will be mapping the elements of X_TEST_TBL to "Location" segment/element and the elements of "X_TEST_TBL1" to "ItemMaster" segment/element. If I try to use "foreach" and map second
element "X_TEST_TBL1" also GLOGXMLElement using the foreach, I get the following error -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1_error.gif
Let us say my X_TEST_TBL contians two records and X_TEST_TBL1 contains one record. Is there any way that I can use these two out parameters to map to the same destination (GLOGXMLElement) so that my final document contains multiple "GLOGXMLElement"s that represents data from both the output parameters? i.e. there should be in total of three occurances of GLOGXMLelement in the output document such that two occurances correspond to data obtained from X_TEST_TBL and one corresponds to data from X_TEST_TBL1.
Please let me know if there is any way to achieve this.
Thanks
Ravi

Is the listed $200 credit towards a trade-in on top of the original trade in value of a phone, or the maximum amount?

Can Not Calibrate the display. The factory profile for the display...

I have an apple cinema display 20" and a mac powerbook g4 (1.25 GHx PowerPC g4, 1.25 GB DDR SDRAM) with os 10.4.9. All of my software is up to is date.
I used to be able to calibrate my colorsync profiles. My computer's hard drive recently failed and I had it replaced and the system re-installed (If any of you live in NYC, I took it to tek Serve, and they know what they are doing).
Now when I try to calinbrate my monitor I get the error "Can Not Calibrate the display. The factory profile for the display could not be found." Like I said I have updated to 10.4.9 but this hasnt solved my problem. I have restarted my computer, and this has also not solved my problem.
Any help!?! Please! This is important to me as I do color work for print and I need to see colors accurately When I use my computer.

I fixed it already. There was indeed a problem in the preferences. In my case I removed the whole preferences folrder to the desktop (which forces the computer to rebuild it fresh) and it worked fine! Then one at a time 'as it was needed, I put back the preferences for other applications (mail, itunes etc). Turns out no preferences was better than whatever corrupted preference was in there causing the problem. You know what I mean. If no preferences are there the applications start over building it new automatically. So it was like a preferences restart. sorta.
Unfortunately, since I dont have applecare I had to spend 50 bucks on the phone with apple to figure this out. It's amazing how long it took them to actually pinpoint the problem. Hopefully if anyone gets that error in the future they'll find this post on google and save some bucks.

Question regarding the pen tool (w/ picture inside)

Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!

A couple of thoughts come to mind:
1. You could create the shape "face on", using guides, and the points will snap to guides with snap enabled. Then you could transform the whole thing together by selecting all the shape layers.
2. Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
3. There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually. I assume this is what you're trying to avoid.
-Noel

Question regarding the installation of a J2EE 6.40 Add-in

Hi all,
I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
Best regards,
Xavier Vermaut

Thanks Bhavik for your reply,
That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
Dear SAP,
We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
(TST) but get the following error message at the very beginning of the
installation
> Cannot find an installed ABAP system, which is a prerequisite for a
> J2EE Add-In installation. The installation cannot continue.
We checked the installation logs (sapinst_dev.log) and found the
following :
> Found these instances:
> sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
> sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
Why does the installation say that it can not find any ABAP systems when
having previously found the 2 different instances running on this
server?
Would this problem be related to the fact that we have two instances on
this server?
Please find hereunder the way we performed this installation :
01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
     (Solaris 10 - Oracle)
     Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
     Part II : CTRLORA10_0-20000121.SAR         (Solaris 64)
     Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
     Part IV : J2EERT10_0-10001982.SAR          (OS Independant)
02) Extract these 4 archives into /install/J2EE_640
03) Check Java Version and Environment Variables
04) Check Solaris Pre-Requisites
05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
06) Log in as 'root'
07) Set DISPLAY environment Variable
08) Move to the Installation directory
      ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
09) ./sapinst
10) In the 'Welcome to Netweaver Installation' screen, select
      => Dialog Instance Finalization
Any idea how to get this solved?
Best regards,
Xavier Vermaut
Message was edited by: Xavier Vermaut

Questions regarding the APEX sample shopping cart

I am fairly new to APEX development, but had a few questions regarding the sample APEX shopping cart:
1) is there a way to integrate Google check out payments with the sample APEX shopping cart
2) is there any way to list a service, that involves monthly recurring payments
3) is there any other shopping cart that is APEX based that is available
Thank you,
Ashok

Hi Sam,
i am haveing a deadline monitoring for my shopping cart where remainders are going to generate for first day and the second day, after both the remainders generated and the approver changing the cost center or asset or order at that time, the workflow flow should retrigger and send the approval mail to the new approver, but it is not going to the new approver, so the workflow is not triggering in my case. so i need to restart my workflow again if any changes occurs.
in the second point my functional guy says that, when the approver changes any text or any date like that it should come for the accept changes, and when he sees the approval preview, only the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should the approver name not the creator name.
so can you please help me in this to get the solution.
thanks in advance

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

you need a lr serial for mac. the serial number for pc and mac are different.
you can download a trial lr 4 for your mac but you need a mac serial number to install.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Question regarding the factory SDRAM for 15" iMac Flat Panel G4 700MHz

Similar Messages

Maybe you are looking for