Question regarding Windows 7 w/iMac and bluetooth keyboard + mouse

I installed Windows 7 Home Premium, thru Boot Camp 3.0. My iMac 10.6.8 restarts w/a black screen. After reading the previous posts, I guess this is b/c I am using a bluetooth keyboard/mouse. Will any corded keyboard/mouse work or does it have to be an apple product? I am hours away from the Apple store, and in a very remote area. I could try to find someone with a PC corded keyboard/mouse if it would work.

Helps to have wired kb/mouse until BT and drivers installed.
Even a tech article here http://www.apple.com/support/bootcamp
Any will do. I use a lot of 3rd party kb and always use MS optical mice. Apple puts their own firmware in some keyboards which I don't understand and can cause problems of their own.
It isn't what OS you run as much as what model year the iMac.

Similar Messages

Brand New iMac and wired keyboard not working

I just bought a new iMac.The wired keyboard seems to work, the mouse is plugged into the keyboard and that works, and I can, somewhat make changes to the volume and other small changes. The ESC key works (I can turn off VoiceOver)but... I can not even get the computer up and going. I can not put in my name or other registration information.
Any ideas if the keyboard has some kind of other settings that I need to turn off. There is no software or anything else in the Mac that I know of. It is brand new and just arrived today.
Anyone have any suggestions?

I'm so sorry. I know this a bummer. But better to take it back. When you take it in, if they boot it and get it to work, make sure and shut down the iMac, wait about ten seconds and press the power button. Make sure it boots to the Desktop and that your keyboard functions as it should. Just make absolutely sure it works before you bring it back home. In fact, since you could not get through the registration process, perhaps they will go through that with you since had problems with it. Something isn't communicating between the iMac and the keyboard. Could be the USB ports, software/hardware ... hopefully they'll repair it to your satisfaction or replace it.
Carolyn
Message was edited by: Carolyn Samit

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

What OS X are you running and do you have USB or Wireless input devices...?
For wireless devices, take a look at > Troubleshooting wireless mouse and keyboard issues
USB keyboards and mice generally don't have connection issues, but they and there cords do occasionally go bad.

I got a new iMac and my keyboard is not pairing to the iMac. The Keyboard came with the computer.

I got a new iMac and my keyboard is not pairing to the iMac. The Keyboard came with the computer.

Since it's a new machine, contact Apple's Support and let them deal with it.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Beginner question regarding 32-bit mixing and mixdown workflow

Hello
I have a beginner question regarding 32-bit mixing and mixdown.
If I edit some 16Bit, 44.1kHz Stereo WAV Files and put them into multi-track view to do crossfades, how should I do the mixdown?
Audition shows me in multi-track view, that it is doing 32-Bit mixing.
Can I just mixdown to 16Bit, 44.1kHz Stereo without any dithering (as the files are 16Bit, 44.1kHz Stereo to begin with), or will I lose quality that way?
I will be performing a normalization to 96% to the mixdown and then split to tracks in Audition, as in the end I want to to have an audio CD.
I guess I could mixdown to 32Bit, then normalize and in the end save back to 16Bit, 44.1kHz Stereo WAV (with dithering, I suppose?), but I want to avoid any unnecessary converting steps.
Greetings

Any time you do any processing on a 16bit file in 16 bit only it will degrade the audio slightly due to rounding of the calculations. Working in 32 bit floating point (Audition's default) takes account of all bits generated due to processing.
So it is always best to work in 32 bit, even if your originals were 16, all the way through until the last stage of saving the files for CD burning. Any losses due to conversion will be insignificant against those due to working 16 bit.

No Bluetooth keyboard/mouse Option Anymore?

I was just configuring a 20" iMac, and noticed we no longer have the option to choose the wireless keyboard/Mighty Mouse.
When did Apple remove this option from the iMac? I see it's available with the MacPro, but not the iMac.
When I bought my current iMac 2 years ago I configured it the the Bluetooth keyboard/mouse.
Is the Bluetooth keyboard and/or mouse not working well with the Intel iMacs?

That's kind of what I'm thinking as well...maybe they realized it costs them more?
Another possibility is that the BT keyboard/mouse has some issues with the Intel iMacs they haven't been able to resolve...so they pulled that option as a way of "discouraging" sales of iMacs configured that way?

Security Cables for Bluetooth Keyboard/Mouse

I am installing the Bluetooth Keyboard/Mouse in a public kiosk and wonder what suggestions you have for securing these devices without a security cable lock slot.
The building is fully secure and we have a motion sensor IP cam setup in our booth, so I think minimal (deterrent) strength would be sufficient. They will be secured to a lectern that itself will have a thick cable attached to the floor or wall. I've seen the tufnut adhesive cables online, but I don't know their quality/cheapness.
Our products are high end, we're using 50"+ 1080p LCDs and are going for a full luxury feel, the tufnut line just looks like it could be a bit tacky.
Does Apple have an official recommendation on how to secure the Bluetooth keyboard/mouse?
Thanks!!

Hello zg:
If you want an "official" comment, it would be best to ask your question at an Apple store. I have no suggestions as I have not needed to do what you describe.
Barry

Sharing Bluetooth Keyboard & Mouse with two Mac's

I have a PowerPC and a MacBook Pro. I also have a bluetooth keyboard/mouse I use with the PowerPC. Is there a way I can also use them with the MacBook Pro and "hot swap" between computers? (By "hot swap" I mean thru some software or configuration switch to use the keyboard/mouse with one computer and then with the other without having to go thru disable/discover etc, etc). I'd really would like to avoid having to purchase another bluetooth keyboard/mouse (I have limited desk space). Thanks in advance for all replies.

This might not be exactly what you are after but I suggest you give it a try.
http://synergy2.sourceforge.net/
It uses TCP/IP connections for the 2 computers but allows you to access each computer's desktop on the primary conputer's screen and move the active use of keyboard and mouse from one to the other as well as having some other features.
Neville

My 2008 imac takes 10 minutes to boot up as far as Blurtooth Setup Assistant it then tries to find my Bluetooth keyboard, mouse and trackpad - and fails! How can I get over this problem?

My 2008 iMac takes 10 minutes to boot up as far as Bluetooth setup assistant. It then tries to find my Bluetooth keyboard, trackpad and mouse. (they are all fully charged. it continues to try to find these items. what do I do next?
from Brian Dowling.

Post an EtreCheck report of your computer and we can look for obvious issues.

Migration Assistant, Target Disk Mode and Bluetooth Keyboards

Wanted to migrate my iMac setup to a new MBP last night. Kept trying to start up my iMac in target disk mode and it would only boot normally not in TD. Finally realized that my bluetooth keyboard was the culprit in that it wasn't connected once the iMac shut off for the restart. Thankfully I had a wired keyboard; plugged it in and migration went as advertised. Nowhere (that I could find) in the Migration Asst. prompts does it mention anything about needing a wired keyboard to restart as a TD. Did I miss something basic? If not, shouldn't Apple make mention of this to avoid confusion and frustration?
BTW, the new MBP rocks!

Yes, that tidbit of info is buried in a support article, as is some other Migration Assistant documentation. But it would be far better if the app had its own comprehensive, searchable Help built into it, just like most other apps from Apple. Note that when you launch Migration Assistant, there isn't even a Help menu, nor are there any question mark in purple circle icons in its windows to offer context sensitive help.
Basically, that's what I requested in my feedback to Apple.

Error Windows 7-64 and Bluetooth with my Q10

Hello
First, sorry for my poor english
Second :
When I try to connect my new BB Q10 with my Dell XPS on Windows 7-64b, I have an error in installation with the pilote "Bluetooth Enumerator".
I cant found the drivers...
Can you help me ?
Thanks a lot
Regards
Patrice

Hello Patrice,
Welcome to the BlackBerry Support Community.
Thank you for your question regarding the error message you are receiving when connecting your BlackBerry Q10 smartphone to your computer.
Have you installed BlackBerry Link on this system as of yet? If not, please download the software by going to www.blackberry.com/blackberrylink. Once completed, restart your computer and connect the device once again.
Let us know if this helps.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

How do you start the hardware test on an imac with bluetooth keyboard

How do you start the apple hardware test on an imac with a bluetooth keyboard as the instructions is to press the D key whilst restarting? And of course the imac cant see the keyboard whilst booting up as the bluetooth connection has yet to be established

Have you tried following the directions for running it from the DVD? The instructions are on the Hardware Test link.If you are correct and it cannot due to the wireless keyboard not making a connection you will need to borrow a wired USB keyboard.

IPad and Bluetooth Keyboard

My iPad no longer responds generally to the Apple Bluetooth Keyboard. I have changed the batteries, disconnected and reconnected via Bluetooth, restarted the iPad, and even tested the Keyboard on the MacBook Pro, with which it works fine. However, on the iPad I am only able to type the connection code for Bluetooth, and use the 'Brightness' and Volume buttons. Nothing else works. I cannot type after it has been connected. Any suggestions?

Dadof2Girls wrote:
1. Does anyone know if the keyboard dock comes apart so that you can use the dock stand alone?
It doesn't look like it in the pictures.
2. If the answer to question #1 is NO, does anyone know if you can use the non-keyboard dock without it being hooked to AC power?
You should be able to but we'll know for sure in March. You could also just buy a case that doubles as a stand.

Dec 2012 iMac using bluetooth keyboard will not exit Target Display Mode

Hi! I have a new 27" iMac that I would like to use as a second monitor for my work laptop a late 2011 15" MBP. iMac is on 10.8.3 and Mac Book Pro on 10.7.5. Connected via a thunderbolt cable.
I can toggle on Target Display Mode using the command-F2 keys on my bluetooth keyboard connected to the iMac. If I understand directions correctly, I should use the same keys and keyboard to toggle off – but it doesn't work. I'm able to work around by putting MBP to sleep, which exits the iMac out of TDM.
I can use the work around, but...
1) it's annoying.
2) If I can't use the bluetooth keyboard to toggle, it would be nice to connect it to the MBP for use while in TMD. Unfortunately, the bluetooth keyboard is undiscoverable, presumably because it's still connected to the iMac.
I wonder:
Am I doing something wrong trying to toggle out of TMD using bluetooth keyboard?
or
Is there a way to enter iMac into TMD without using keyboard command? Maybe System Preferences?
Thanks for your help in advance!

Here's the solution: I had the same problem using my 27" iMac as an external display. The issue is, when you go to Target Display mode, your target computer, the iMac 27" locks the screen with your password.
To switch off TDM, type your password in on the iMac keyboard and press the enter key.
Now press COMMAND - F2 and the displays with switch back to two separate displays. :-)
I had to think like a computer to figure that out but it makes sense.
I also have the disappearing mouse pointer and have not figured that one out. I did all the software updates and I did not have this problem until I upgraded to Lion. It is definitely a software issue. I might have to open a case with Apple support. Not happy.
Derrick

Bluetooth keyboard, mouse and trackpad not responding after 10.8.5 update

I updated to 10.8.5 on my iMac this morning. The update has killed my trackpad, mouse and (presumably) keyboard as well.
OS X will boot to the log on screen but the mouse pointer is stuck in the top left of the screen. Trying keyboard, mouse or trackpad obtains no results. Switching the bluetooth devices off and on, will obtain a connection lost and connected on the screen but still the pointer will not respond.
I have tried hard booting to computer twice now and it has not resolved this. As of right now I am totally unable to use my iMac due to the software update as I have no wired keyboards or mice.
Help!

Maybe they will work in the Safe Mode.Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Question regarding Windows 7 w/iMac and bluetooth keyboard + mouse

Similar Messages

Maybe you are looking for