Question related to IDOCs
Hello,
I have a question related to IDOC processing.
Lets assume that I process the following IDOCs collectively in the transaction BD87: -
1) 100
2) 140
3) 150
Simultaneously, another user using the same user ID as myself, processes the following IDOCs: -
1) 110
2) 120
3) 130
Is it possible to determine which IDOCs were processed collectively together? I mean is there some sort of an IDOC attribute which would be the same for IDOCs 100, 140 and 150 and for IDOCs 110, 120 and 130?
I hope that my question is clear. Please try and answer it as quickly as possible.
Best regards,
Divyaman Singh Rawat
Simultaneously, another user using the same user ID
I dont think SAP has any such provision. May be you can track by UserID but in your case that too is same.
Similar Messages
-
Question related to concept of PCK
Hi All.
I am quite a newbie to XI and am only learning it thru online help. I have one conceptual question related to PCK.
My understanding is that PCK is needed by a small business company to communicate to its larger partner which already has XI running. Correct me if I am wrong here itself.
Now if the larger business partner already has XI, why does the smaller one need a PCK at all? The XI instance on the larger partner will have all the necessary adapters to understand any format send by the partner. So even if the partner(smaller) sends any format- be it IDOC/HTTP/FTP, the XI instance on larger partner will have its adapters ready to perform the conversion.
Then why is this PCK needed at all?
Thanks in advance. Hope my query is clear
Regards.
SamantHi Samant,
Your question is a very good one, Though I have not worked on PCK, I can share my ideas based on some brain storming session I had with our collegues & business partners.
While executing projects, there are technical & operational issues. For example, when you access any HR related data of a UK based organisation then all those who work on that project have to undertake data security pledge. Like wise there are many constraints on data & system accesses, which vary across organisations.
When you use PCK*, irrespective of different systems what the small vendors have, you communicate with your Big company's XI system only on the XI's msging protocol http(s)/SOAP. This allows a fair amount of ownership of data/access related issues to the small partners.
-> you go for PCK, when there is no need for small vendors to go for XI.
Hope this is of some help. As Michal said there might be much more (or even better) reasons.
Michal, when you say "all of the mappings and transformations have to be on the small company side", what exactly you mean by this. can you please eloborate.
Thanks & Regards
Vishnu -
Relation between idoc and EDI,ALE
Hi,
I am new to IDOC. Can u please tell me whether there is any relation between IDOC and ALE or IDOC and EDI. If so what is the relation between them.Hi Buvana,
ALE is a means of migrating DATA between SAP systems. You configure logical destinations, establish some migrating criteria and the system takes care of getting your data from point A to point B.
EDI ->
EDI is described as the interchange of structured data according to agreed message standards between computer systems, by electronic means. Structured data equates to a simple and direct method of presenting the data content of a document. The method of ensuring the correct interpretation of the information by the computer system is defined by the EDI standard."
EDI is a technique used to communicate business transactions between computer systems of different companies and organizations. Note that sometimes the EDI mechanism deployed at a company is often used to interface to other systems within the same organization."
Info shuttle - "I was implementing EDI at a customer and I wanted some real data to test with in Development, so I asked the Project Manager to see if he could arrange something. Literally, 20 minutes later he came back and said that there were 10 new orders in Development, together with the customer master records related to the order, the carrier vendor master record, the material master records, ... were all there. I asked him how he had done it so quickly which led me to my first exposure with Infoshuttle, a tool that does this for you using the ALE functionality. As an ALE consultant I know how to do this stuff but I also know how long it would take to set that up.
www.sapgenie.com/sapedi/edi_sap_training.htm
www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
IDocs act as data containers in an ALE scenario. They are just a format of storing application data and then transferred using ALE. Take a look at http://www.sapgenie.com/ale/why_ale.htm and http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc for further details on ALE.
Check this link.
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/IDOC.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/saphelp_47x200/helpdata/en/0b/2a6095507d11d18ee90000e8366fc2/frameset.htm
Regards,
Priyanka. -
can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
Question related to Java Concurrent Program
Hi Friends,
I have a basic question related to Java Concurrent Program in the Oracle application. I would like to know the how Java concurrent program is executed in Oracle applications.Also, want to know where can I find the document for the AOL packages for Java concurrent program. Document for packages like oracle.apps.fnd.cp.request.* , oracle.apps.fnd.util.*.
Please let me know.
-Thanks,
SatyaYou may also check:
Note: 250964.1 - How to Register Sample Java Concurrent Program
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=250964.1
Note: 186301.1 - How to register and execute Java Concurrent Program ?in Oracle Applications R11i?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186301.1 -
File to IDOC:how do i relate inbound idoc with generated idoc in the R/3
hi experts;
can any body tell me how can i relate the IDOC number genrated in the PI with the generated IDoc number in the SAP R/3 system for file to IDOC scenario?
in SAP PI for tcade idx5, idoc no is:12002
but in SAP R/3 in tcode WE05, idoc no is:846915
how can i know a particular message (in SAP PI) created a particular idoc in the backend SAP R/3 System.
thanks in advance,
kumarHi Kumar
at the time of testing you have to note down a time at what ur file got picked up ok
then go to we05
-> give the date on CREATED ON field.
-> then in BASIC TYPE field select your particular IDOC CREMAS05 or whatever, see the TIME field that you have noted down at the time of testing, if that is matching means that is ur latest IDOC you have tested.
-> one more thing, tha last IDOC showing in the list means that is your latest IDOC you have tested.
Hope i have helped you, points plz
Warm Regards
Dheeraj Kumar -
Interview Questions related to Warehouse management
Hi all
Can u please help me regarding Interview Questions related to Warehouse management
Thanks and Regds
DanielHave you searched in very first thread
[Warehouse Management?|New to Materials Management / Warehouse Management?; -
Questions relating to Groupware Integration (Outlook)
Hello,
I have few questions relating to groupware integration for Outlook:
Q1) The "Relate to CRM" option in outlook add-in for end user is available only in client side integration? Is it not available for server sider integration (i.e. in server side, end user cannot directly assign CRM account or Transaction to object in outlook the way it is done in client side)?
Q2) Is there any end user interface (like add-on) available in server side?
Q3)In client side - Can the outlook add-on for SAPCRM be enhanced for different business logic or look n feel?
Thanks,
VickyHello Vicky,
1) Yes the Relate to SAP CRM function is part of Client-side groupware only.
2) The Add-in is only available with Client-side groupware.
3) The Add-in cannot be customized. However the results can be influenced by parameters in transaction GWIPROFILE.
The information displayed in the Business information Pane can be changed.
Best Regards,
Gervase Auden -
Basic Questions related EHPs for SEM
Hi Guys,
I've some basic questions related to EHPs: -
1. If we don't mean to implement any of the new functionalities does it make any sense to implement EHP? In other words do EHPs also have some general improments other than the functionalities which can be specifically activated?
2. If we just activate a functionality and don't implement/ use it can there be any negative impact?
3. In case of a pure technical upgrade from SEM 4.0 to SEM 6.0 which EHP would be recommended?
4. Is there a quick way to find all relevant notes in EHPn which are related to corrections for EHPn-1?
Thanks in advance,
-SSCHI,
If you see some of my older posts I have had many issues with certain features of the EHP2 functionality but that doesn't mean I would recommned against it.
BCS 6 EHPs 3 & 4 (BCS 6.03 / 6.04) - enhancement packs worth implementing?
BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack
My recommendation is to implement the EHPs but not necesarrily activate the functions (in SFW5) unless you need them - this means that you will only have to test once after EHP implementation and will have the ability to activate the other features as and when required (although testing is required after activation of course) whereas it might be difficult to persuade your client/basis team to implement EHP4 later if you don't do it now.
In the features of EHP2 (activate FIN_ACC_GROUP_CLOSE) it states that there is a general performance improvement - although I have yet to experience it! From OSS note 1171344 "The functionality which is available in EHP2 consists of...
... Performance improvements of status management, reporting and initial start-up of consolidation workbench and monitor.
Since activating FIN_ACC_GROUP_CLOSE I have had many OSS notes requiring application but i discovered that when the technical team implemented the EHPs (before i joined this client) they somehow forgot the latest SP (support packs) and didn't upgrade to the current level - so make sure that you get the right SPs too (see the links in Greg's link above) to avoid the many OSS notes.
As for your question - "is there a list of OSS notes to specific to EHP upgrades? - the answer is most definietly "NO" - I already asked OSS in desperation!
however, you can see the OSS notes that i have applied listed in the above link ( BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack ) -
Relating outbound idoc to inbound idoc to create a document
We have a requirement to relate the outbound idoc to inbound idoc , transfer the data and create a document.
Kindly let me know the tcode / configuration steps of how can we relate the idocs.
Thanks,
Nalini S.Hi Juan,
Check the IDOC: WMATGRP01. Hope it will be helpful for you.
BR,
Lokeswari. -
Hi friends, IDOC and RFC are sap related.but idoc is in abap stack rfc is
1)IDOC and RFC are sap related.but idoc is in abap stack rfc is in java stack.what is difference between two.?
hi ganga,
The IDoc adapter is used by SAP systems to connect to a centrally configured Integration Engine using IDocs
which is properitory to SAP integration
so it doesn't need the Adapter engine.
refer:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
The Adapter engine is working on the J2EE Engine.
RFC Adapter is provided by the AdapterEngine.
So RFC needs Java Runtime where IDoc doesn't.
refer:
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
regards,
nikhilbos -
Some questions related to SAP XI
Hello!
I would like to know the answers for the following questions regarding SAP XI-context (if it possible with Yes/No and a short comment/explanation)
<b>CAPACITY PLANNING GUIDELINES</b>
a) Guidelines to size the server(s)?
b) Guidelines for sizing the over all environment for High-Availability
<b>ARCHIVING CAPABILITIES</b>
a) Approach to archiving of obsolete data
<b>PLATFORM SUPPORT</b>
a) Software supported on HP-UX 11.i V2 (r6) on Itanium.
b) software supported on Windows 2003 sp1 (x64) on AMD Opteron
c) software support aligned with release roadmaps for future versions of HP-UX and/or Windows Server
d) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why)
<b>RELATIONAL DATABASE </b>
a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported.
b) database monitoring tools be used to manage impending maintenance needs and potential problems and performance impacts (i.e., tool will monitor and detect prior to real problem occurring)
c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
d) database accept binary-large-objects (BLOBs) and be referenced via the relational engine.
Thank you in advance!
Regards!
A.Henketwo questions related to this:
1. Why Java is designed to only permit single
inheritence, any stories behind the scene? I think
some major reasons why "prefer interfaces toabstract
classes" is accepted is rooted in this limitation.Yes, one of the reasons interfaces are better is that
you can only extend one class, but implement many
interfaces. Say you have a concrete class that should
"implement" two different types. If those types were
defined as abstract classes, you could only use one
type. You could implement both types if they were
interfaces though. So why java is designed to have this limitation? There may be some arguments before this is settled down. I always like to hear this kind of stories:)
2. Base on the fact that once an interface is outof
box and widely implemented, it is almostimpossible
to change it. So how you guys design yourinterfaces?
Could you share some? In my idea, I would designmy
interfaces as compact as possible.You could extend the interface and start using that
if you didn't want to break existing code. You
couldn't use that implementation as an Interface1
though, since the new methods only exist in
Interface2, so that's not an optimal solution.So we may always need to add a new interface when we just want to add a new method. -
General questions related to Java
Good evening,I would like to ask you some questions related to Java :
1) class A {
public int x=1;
public int y=5;
public A() { y=6; }
public A(int a) { x=a; }
public A(int a, int b) { x=a; y=b; }
class B extends A {
public B() {}
public B(int a) { super(a); }
public B(int a, int b) { super(a,b); }
public B(int a, int b, int c) { x=a+b+c; }
public B(int a, int b, int c, int d) {
super(a,b); y=c+d; }
public class Test {
public static void main(String[] args) {
B b4 = new B(1,1,1);
System.out.println("b4.x: "+b4.x+" b4.y: "+b4.y);
I cannot understand why y = 6.
As i see it,i find it more logical that y = 5.
Could anybody tell me why y becomes 6?
How did we get into the constructor of A : public A() in order y to be changed?
2) Well in an exercise i have to handle out we have to find the a,b,c of a program .Unfortunately i dunno about them,Can anybody explain to me what do they mean or attach me a link (e.g. a tutorial) in order to figure out?
a)pre condition in Java
b)post condition in Java
c)invariant condition
3)
3) Fraction apple = new Fraction (1, 2);
Fraction peach = new Fraction (4, 5);
Fraction pear = apple;
peach.halve();
pear.halve();
System.out.println(apple);
System.out.println(peach);
System.out.println(pear);
It's the first time i see an object as a parameter in System.out.println.
CAn anybody tell me when i can pass an object as an argument in System.out.println?
Thanks in advance!How did we get into the constructor of A : public A() in order y to be changed?if you don't explicitly call a super constructor, the empty super constructor is called for you. If no empty accessible super constructor is available and no explicit call from subclass is made - compile error.
CAn anybody tell me when i can pass an object as an argument in System.out.println?Whenever you want. Object.toString() will be called and the resulting String will be used. If the object is null, the String "null" will be used instead. -
Question related to E-Business Suite (Business Group)
Dear All,
I just started my career as an oracle Functional Consultant (HRMS), I have questions related to Business Group
- Why BG is a part of HRMS? Although we associates different profiles with it like, legal entity, which is used for financial purpose only.
- Under which conditions we make more then on Business Group?Pl do not post duplicates - E-Business Suite queries related to BG
-
Question related to Synchronous update
Hi, all
I have some question related to synchronous update:
1. What is the syntax if I want to write synchronous update.
Do i write as:
call funcition A in update task
commit work and wait
Or just
call function A (A declared as update type function )
commit work and wait
Or ...
2.If we use synchronous update, is VBHDR,VBDATA still filled the same way when using asynchronus update?
Thanks in advance,
LimingHi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single
database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Maybe you are looking for
-
Satellite P300-18M - Is using the card reader for Vista Ready Boost OK?
Hi there, I have a P300-18M, and, due to getting a new phone, have an 8GB Micro SD Card spare. I have put this in the card reader, and I am currently using it for Ready Boost, even though I have 3GB of RAM, there is definately a performance boost...
-
Hi, how order related billing returns and credit memo's handled
hi, sap gurus, i am able to configure the order related billing business process and plz requesting to explain the how to handle returns process for the same and how i can raise credit memo for the same process. regards, balaji.t 09990019711.
-
Does anyone know how to rest their security questions because I have forgotten mine!
-
Cannot upload QM Catalog long text
All, Can you help with entering QM catalog code group long text into the Production System? It works correctly in the Test System but I cannot edit the catalog using QS41 in Production (basis will not grant QS41 edit permission for client). I underst
-
Creating Crawler impact rule through Powershell
Hi All, I want to create a "Crawler Impact rule" for one web application, I found below script but its not working or it may be not the full script. As i am new in Powershell script writing, please help me writing the full PS script or please suggest