Question Related to Source System of BI7 Technical Content

Hi Experts,
   I activated BI7 Technical contents using SPRO Transaction.
Activation is successfull.
My question is that I could now find two source systems for
each activated Datasource of Technical Content(One BI self source system and another R3 source system).Is that right?
I thought that BI statistics wil be based on only BI as a
source system.
Please help me in this.
Thanks,
Senoy
Edited by: senoy laxman on Aug 19, 2008 3:29 PM

This is because, before actiavtion of technical content, those TWO source systems were already assigned (Check Boxes 'ON')...under
RSA1 --> Business Content --> 'EDIT" menu --> Source System Assignment --> see those check boxes 'ON' for BI self source system and R3 source system.
U r right..BI statistics wil be based on only BI as a source system.

Similar Messages

  • Creating SAP R/3 source system in BI7

    Hi Gurus,
    Could anyone tell me how to create SAP R/3 source system in BI7 and how to configure RFC for BI7 and SAP R/3 4.7?
    Thanks in advance
    Muthu

    Hi Muthu,
               Check here.....
    http://www.saptechies.com/connectivity-file-system-in-sap-bi/
    http://help.sap.com/bp_biv370/html/index.htm
    Thanks,
    Vijay.

  • Error : Modification not possible- while creating source system in BI7

    Hi BI Guru's,
    We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
    Is there any body put some light on this issue
    thanks in advance,
    Regards,
    Mohan

    Mohan,
    Check if your logical systems are in place in SCC4 and also in the transport connection.
    Also check if you are connecting to the source system by IP Address or by logical name.
    Accordingly you would have to maintain the source system connections.
    Arun

  • Question to assigning Source System for Activation

    We want to assign source system for activation, before business content-InfoObject catalog activation. The steps as follows:
    1.On the Data Warehousing Workbench: Business Content view from the menu choose Edit  Source System Assignment.->This step is ok, no question.
    2. In the Choose source system by default? dialog box select the checkbox in the column Default assignment in the row containing the source systems you need to load data from.->Now we can see BI system as default call DEGCLNT500 displayed, in my case we only connect one R/3 system call DHHCLNT100 to BI system.
    So, the question to that is shoud we select both R/3 source system and BW source system as default or just select R/3 source system as default and dis-select BW source system?
    Which one should we choose, both or only R/3 source system?
    Pls help, thanks!

    Hi hi ni,
    If what you are activating it's going to retrieve data only from R/3, then select R/3 and uncheck BW.
    You can change this whenever you want, if in the future you need bw, before activating, you can change it.
    This doesn't means where is going to get the data from, this is just to look for active (and replicated) datasources to connect to the business content you are activating.
    Hope this helps.
    Regards,
    Diego

  • Question to Maintaining Source System IDs

    We go to RSA1, and choose Assignment source system to source system ID in toolbar, system display source system ID field and Source system ID text field. So the question to this activity is that is this Source system ID flexible, not fixed.
    1) E.g.in our case BW source system call THTCLNT100, so could we just use TH100 as source system.
    2) Once we create one source system in BW system under Source system Tab, should we also follow this steps, namely Maintaining Source System IDs for this new created source system?
    Thanks for the answer.
    Edited by: hi ni on Apr 14, 2008 5:39 PM

    Hi,
    as far as I know, the id can only be a character of length 2 so in your case just TH or T1 or something else. It's normally up to you. Once maintained it cannot be changed anymore.
    regards
    Siggi

  • Unable to 'set the default source system' to Install Business Content

    Hi,
    Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
    I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
    When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
    Could you please help me out?
    Thank you.

    Hi,
    It seems to be a bug in version 3.5.
    Do like this:
    After you open the screen to <i>choose the dafault source system</i>
    Clcik on 3rd button(F6) available in the bottom of the scrreen.
    And then select teh tick mark for required system.
    And then click on Continue button
    You have do this step before you drop the cube to right side of the cube.
    Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
    Drag and drop required cube with dat flow before.
    Now you can see the Transfer rules with selected Source system only in the collected Objects.
    With rgds,
    Anil Kumar Sharma .P

  • What's meaning of assign source system in RSA1, BI content

    by choosing BI  self source system, SAP ERP source system, and other file systems.

    In a simple term....u tell the BI system from where u have to extract data,,,
    If it is frm a BW system , R/3 system or a flat file....

  • Source System in BI

    Hello All
    I have following questions related to Source system in BI. RSA1 --> Source Ssytem
    1) We have following source system connection
      BI (DEV)  BWDCLNT400 ---> ECDCLNT400,
      BI (QA)     BWQCLNT400   --> ECQCLNT400  and
      BI (PROD)   BWPCLNT400  --> ECPCLNT400.
    I would like to know to manage DTP / Info Packages / Data Source because all these are tied up with source system and we have different names in DEV, QA and PROD ? Is there any way, I can change the source system name after the import steps in BI ?
    2) One way to answer my questions is to have a generic names likes BISYS400, as the name of the source system in BI , that points as follows, to different source system on ECC side
      BI (DEV)  BISYS400 ---> ECDCLNT400,
      BI (QA)    BISYS400 ---> ECQCLNT400,
      BI (PROD) BISYS400 ---> ECPCLNT400,
    What is preferred from above whether step 1 or step 2 ?
    3. when we create a source system ECDCLNT400 in BI, I don;t know why it is getting created within "BI" node, under the source system, I know for sure I got selected the code "SAP", before I create source system within BI. How would I move my source system ECDCLNT400, from BI node SAP node with Source system ?
    3. Do I need to create the info packages and DTP manually in each region like DEV, QA and PROD again or can I import these Info Package / DTP from QA / PROD ?
    Thanks
    BI

    Hi
    1. If iam not wrong my understanding with your question is when you trasnport  the Objects from DEV to QA
    how the Infosource names will be changed. If that is the problem we need to maintain the Conversion for this Origin an Target systems after transport
    in RSA1 - Tools-Mapping of source System names : hope this automatically leads to the tcode RSLGMP
    for you
    Origin Source System     Target Source System
    BI (DEV) BWDCLNT400  -BI (QA) BWQCLNT400
    2. For the Source system to be moved from one node SAP to BI , i dont think so u will be able to move that,
    3. All the objects can be transported from DEV to QA and then to PROD or you cna create as required in the different systems
    Regards
    Edited by: 200816 on Sep 24, 2009 4:24 PM

  • Patch upgrade in Source system ECC 6

    Hi,
    We are plannig Patch upgrade in the ECC 6 r/3 System. This is source system for BI7 (NW2004s).
    I want to know, we beibg a BI consultant
    1. What we need to check in ECC on patch upgrade.
    2. What precautions we need to take for better facilitating the patch upgrade in ECC 6
    3. Other related things.
    can someone please reply.

    Hi
    check patch level in BI system :---
    Logon to your SAP System
    SYSTEM>STATUS>Click the search buttion under SAP System Data
    Where you can find your patchelev.
    BI Content and Plug-in Information
    These are the links to get detailed information about BI Content and Plug-in.
    Check the release notes in this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/bc/52a4373f6341778dc0fdee53d224c8/frameset.htm
    Dependencies of BI_CONT Add-Ons: Functional Correspondences
    https://websmp207.sap-ag.de/~sapdownload/011000358700007362962004E/func_corresp.htm
    Dependencies of BI_CONT Add-Ons: Technical Prerequisites:
    https://websmp207.sap-ag.de/~sapdownload/011000358700007362972004E/tech_prereq.htm
    BI Extractors and Plug-in Information:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000682135&
    http://sap.seo-gym.com/copa.pdf
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    /thread/178564 [original link is broken]
    Asset Mgt Data
    http://gnanamax.com/Documents/BI%207.0%20Functional%20Upgrade%20-%20Migration%20points.pdf
    /thread/507115 [original link is broken]
    Go to sap logon pad on the top left side of the logon pad u can see a small click option beside the logon gui for eg: sap logon710 or 640. click on that and select about sap logon there u can c the patch level, build, file name, file version etc,
    Hope it helps
    regards
    gaurav

  • Steps to Create R/3 Source system in BW

    I need to create a source system for extracting data from R/3
    Please let me know the steps for the same. Any document for the same would be appreciable
    The BW Client is 100
    Logical client is 100

    Hi
    Navigate to Source System tree
    Here you need to create new destination by entering Target Computer, System Id, System Number, Back ground user & password.
    In the RFC Destination screen, enter  Target Host, System Number, Port Number,
    If you want to make "Trusted" system,check thet check that check box.
    This is the way to create to source system in BI7.0
    Don't forget to test the connection.
    Regards
    Saravanan.ar

  • Prevent objects being transported for Sandpit source system

    Hi there,
    We have a 3-tier systems landscape for BI: DEV, QAS, PRD (we do not have a sandpit BI). In our R/3 development system we habe two clients which are both setup as source system for BI DEV. One of the clients in R/3 DEV serves as sandpit in that system and objects can't be transported from it. However, since this client is connected to BW, objects related to this source system can be transported from BI DEV. We want to prevent that, so only the objects in BW DEV for the real R/3 DEV development client are allowed.
    Is there a way in BI to configure a source system in such a way (other than via security roles/profiles), that objects related to this source system can't be transported?
    Cheers.

    Sander, you should post this in BASIS also. By posting in both the forums, you have a better chance.
    In case BASIS folks say that they cannot stop this, try this work-around.
    In BWQ, in RSA1, there is a Source System Mapping in one of the tools menu. There, your DEV is mapped to QAS, etc.
    There, you may have your R/3 DEV mapped to R/3 QAS.
    See if there is an entry for your R/3 Sandpit/Sandbox. If there is one, leave the mapping for it as Blank.
    See, the only Objects that are related to Source System in BW are InfoSource-DataSources. If there is no mapping for SOurce System in BWQ, then the transport will fail.
    This is just a thought.
    Uday-Ram Chamarthy

  • Other entites on Source system not fetch

    Hai , i have a question
    After initialize source system was finisih and i saw operation in ODI GL_SETUP has done .
    Why just Setup_book is show but Trial Balance , segment and other not show ?
    I am Using ODI v11i , EBS v11 and FDME 11.1.2.3
    Thanks
    Setiawan

    1. Read about [http://kb.mozillazine.org/About:config about:config]
    2. Change preference
    browser.tabs.closeWindowWithLastTab
    to false.
    Does it help you?

  • Source System Logical Name change

    Hello,
    We are refreshing our R3Qas system with a copy of our R3Prd system.  As part of this task our R3Qas logical name is changing from QASC230 to QASC200.
    I am at the point in the refresh where I am beginning tasks on the existing BWQas system. 
    I Right Click on the source system representing the R3Qas system "QAS client 230" technical name: QASC230.  I choose 'Restore'  I then provide the logon information but the system it jumps to is the Old R3Qas not the new R3Qas.
    I know that it is jumping based on the RFC, So I assume I can change that RFC to jump to the new system, what do you think?  Also what about the Source System name an technical name, will it always be QAS Client 230 and QASC230 or can that be changed to reflect the new name of QASC200?
    Thanks for your advice and assistance!
    Nick

    Since the BWQ system was already an existing system that was attached to the previous R3Q system, this task was essentially busy work.
    The change that occured was that the existing R3Q system (Physical Name: QAS01 Logical Name: R3QASC230) was being replaced with a new R3Q system (A copy of Production was used) (Physical Name: QAS02 Logical Name: R3QASC200).
    The actions that I needed to take to connect BWQ to the new R3Q follow:
    1. On QAS02 visit TX SE37. and run RSAP_BIW_DISCONNECT, Choose 'Single Test'.  For I_BIW_LOGSYS: I provided BWP001 which corresponds to the logical name of our Production BW system. For I_OLTP_LOGSYS: I provided R3PRDC200 which corresponds to the logical name of the QAS02 system (this system).  I then Click 'Execute' and 10 seconds later this step is done.
    2. On QAS02 visit TX: BDLS.  For the 'Old Logical System Name' provide BWP001.  For the 'New Logical System Name' provide BWQ001.  Ensure the 1st radio button is selected, and deselect all checkboxes.  From the Program menu choose to 'Execute' in background (it took about 45 minutes). Confirm the 'Mapping System Name'.
    3. Again on QAS02 visit TX: BDLS.  For the 'Old Logical System Name' provide R3PRDC200.  For the 'New Logical System Name' provide R3QASC200.  Ensure the 1st radio button is selected, and deselect all checkboxes.  From the Program menu choose to 'Execute' in background (BASIS already did this step so a message appeared to that effect)
    4. On the BWQ box visit TX: BDLS.  For the 'Old Logical System Name' provide R3QASC230.  For the 'New Logical System Name' provide R3QASC200.  Ensure the 1st radio button is selected, and deselect all checkboxes.  From the Program menu choose to 'Execute' in background (it took about 45 minutes). Confirm the at the prompt and run.
    5. On BWQ create new RFC's based on the old ones to point at the new QAS02 system.  Modify the old ones with an X in the 'Target Host' so they do not function.
    6. Open up the BWQ client in SCC4.  (or perhaps try SM30 to modify the table in the next step)
    7. On BWQ visit TX: SE16.  Tablename: RSLOGSYSDEST.  Change the 'Old' reference to the QAS box to the 'New' information.  (ie: R3QASC230 became R3QASC200).
    8. On BWQ visit TX: WE20.  Expand 'Partner Type LS', Select 'R3QASC200', click the classification tabe, change the 'Partn.Status' from I to 'A' and save.
    9. On BWQ right click on the R3 Source system and choose 'Restore' Provide the passwords that are required.  When prompted to logon to the remote system use an ADMIN (BASIS) level Account.  Click 'Continue' when you get the 'User exists...' prompt.  Click 'Only Activate' when prompted.  you will then get a termination message regarding the port description.
    10. On BWQ Back at WE20: Expand 'Partner Type LS', Select R3QASC200, double click on RSRQST.  Under 'Outbound Options' click the drop down for 'Reciever port'  Select the 'new' correct system and 'Save'.
    11. On BWQ right click on the R3 Source system and choose 'Restore' Provide the passwords that are required.  When prompted to logon to the remote system use an ADMIN (BASIS) level Account.  Click 'Continue' when you get the 'User exists...' prompt.  You will get a prompt to Use or Check, choose 'Use'.  When prompted about 'Connection cannot be used' click 'Delete'. Logon again as ADMIN account, Click 'Continue' when you get the 'User exists...' prompt. Click 'Replicate as well' when prompted.  you will then get a termination message regarding the port description.
    You should be all set now!
    Nick

  • Source System Refresh with BW system Connected

    Hi SDN Gurus,
    We are doing a source system refresh for CRM 5.0 Production to CRM Quality.My question is the source system of the BW system will be Changed and the BW Quality will have old data. What are the Post Activities which needs to be done in BW 7.0 system after the CRM system is refreshed.
    So that the Quality BW system which will be now Production can have fresh data from Production System of CRM.
    Thanks and Regards
    Vishwanath

    Hi Ravi,
    Thanks for the same.
    I have another issue. My CRM Reports BI 7.0 is being displayed in Enterprise Portal, We have defined variables for user entry and they can select the values from the selection screen of the variable.
    Let's say we have 80 thousand records and we have variable let's say Client Name, where the user wants to select his client name and display records for that client. The Screen shows him only 72 rows of data i.e nearly 1000 records of Client Name. But we have nearly 20000 client names, and only 1000 client names are being displayed to select from. If he does a filter (eg: A, it displays all the names starting with A, but when we say B or C*, though the data is available in the ODS table, those client name is not displayed in the Screen.
    My question is how to Display all the Values or atleast when he gives A* or B* or Z* it should display those Names, so that he can see the records for those client Name.
    I have done all sorts of R&D to achieve this but in Vain.
    Please help me to sort this.
    Thanks and Regards
    Vishwanath

  • Permission problem when create source system between BI and R/3

    Hi All,
    I want to create a source system between BI7 and R/3 system
    Both RFC connections have been created and tested succefully on the 2 systems
    But when i create the source system on BI I have the message :
    "Changes to Repository or cross-client customizing are not permitted"
    Any idea ?
    Thanks in advance for answers
    Sebastien

    Hi All,
    Thanks for your answer
    The issue was solved when system is opened
    Now my source system is created but I can't activate it !
    When I try to activate I have 2 error messages in result :
    RSAR 374 : The folowing errors occured in the source system
    RSAR 375 : Result of the destination check: Timeout
    There is no SAP help on these messages and for the moment I don't find thread about this on forum
    Any idea ?

Maybe you are looking for