Question relating tips for 2 DFF segments within the same group

Hi All,
I have a requirement where in I need to display a tip message for two of the DFF flexfield Segments within the same group. Currently we are displaying a tip for one of the DFF flexfield segment by placing it at the end of the Segment List and creating a normal tip message just below it. The shortfall of the above approach is when I add new segments to the DFF, the tip for the former segment is out of place.
Also, I currently have a requirement to create another tip for another Segment which is part of the same DFF. Could anyone of you please suggest how both the tips for the 2 DFF segments of the same group can be shown on the same page?
Thanks,
Sowmya.K
Edited by: user770244 on Nov 5, 2009 12:54 AM

Hi experts,
I am trying to find some solution that way:
- Maintain field catalog (FBRC008): setting field Segment as "secondary organisational unit" and setting field parter segment as "Secondary partner unit"
- Setting up a the reconciliation display (FBRC003) with the flag "Use Primary and Secondary org units and partner units in hierarchy display"
But when I launch the reconciliation display, the following dump arises :
"ITAB_ILLEGAL_COMPONENT"
In the current ABAP program "CL_FBRC_PRESENTATION==========CP" the internal
table "<LT_TOTAL>" was to be
processed with "SORT".
At the same time, a component "SEGMENT " was dynamically specified as content
of the field "ME->MD_SECONDARY_ORGUNIT_FIELD".
Do you have any explanation for that dump?
Thanks!

Similar Messages

  • Delivery without reference for stock transfer within the same plant 311

    Dear all,
    I need to create a delivery without reference for stock transfer within the same plant, movement 311,  i.e. just from 1 storage location to another storage location.
    I tried to use VL01NO with delivery type UL.
    Now my question is how can I assign a receiving plant for a customer?
    I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
    It's possible this option???
    Thank you very much.

    Hi,
    What is the item category you are assigning while doing VL01NO?  Check the schedule line category for that item category assignment.  That Schedule line category has an option for one step GI.  There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311. 
    Thanks
    Krish.

  • SSO for various applications within the same portal

    Is it possible to implement SSO at the application level in an EP 7.0 environment?
    Ex:  One Portal with ESS and BI Functionality (BI is connected to the BI backend, ESS is connected to the ECC backend, but all of it exists within the same portal instance) in which the BI Explorer would rely on SSO, while the ESS would require a logon to the portal.  The initial page of the portal would not be a logon screen, but rather a menu screen
    Does this functionality exist?

    For our purposes, ESS would have to be authenticated (perferably through Active Directory), while BI Explorer wouldn't require "visible" authentication, BUT the question would be, could all of this exist on the same portal..
    I agree that it certainly wouldn't be user friendly to ask users to logon (using AD l/p) for certain parts but not others.  I think the solution would simply to have 2 portal instances (ESS/ECC = Logon/Password,  BI Portal = SSO), and to federate the BI to the ECC Portal. That way, if someone wanted to work in BI and only BI, they could go without logging on, but if they wanted to go to the ESS Portal they would have to logon BUT would be able to use both ESS and BI.
    This all stems from an effort to eliminate the neccessity of having to logon to a portal (for a small group of managers), but still maintaining a level of security for ALL users in regards to employee self-service

  • How do I add multiple emails for one contact to the same group list?

    When trying to set up a group email list using address book, is there a way to include multiple emails for the same contact to one group.  For example I'm trying to set up a baseball team group email.  Some kids want emails sent to both mom and dad which have different emails.  I currently have them in my address book as the boy's name with the emails listed as mom and dad.  I can add one "mom" to the list but when I compose the email, it will use the most recent email used.  I would like the group to contain both addresses for mom and dad without setting up to different contacts for the same player.

    var cToAddr = this.getField("saManager").value + ";" + this.getField("ManagerEmail").value;

  • Linking Questions cs5: Linking within the Same file, Sharing links, file size bloat

    I have to make print cards for my job. Print cards being a 1 page version of the Larger package layout that the place I work manufactures. On this print card is a section for customer info on top, and the print representation on the bottom. What I've been doing is using two files. The first file is the full-scale art on one artboard, and the customer info on the second artboard, but both within one file.
      On the second file, I combine the two. I still use two artboard because it's a front and back print-off. The front page (1st art board, 2nd file), is the customer info at the top (linked from the 2 art board, 1st file) and the full art shrunk to fit below (also linked).  the back page (2nd art board, 2nd file) is the individual elements of the artwork, zoomed in for easier viewing. For the second page, I use masked links from the fullsize art, sized appropriately. The reason it's important that they all use links, is so if I update the art, it will update the print cards as well.
      I've been trying to stream-line this process. This works ok, but the numerous links bloat the file size, and I have to email these to customers. I've started using "Flatten Transparency" on all my Print cards (2nd file) and saving it as a separate .pdf. This cuts out the links, but then all of my masked images are hiding the whole original file behind their mask. So then I started manually cropping each individual masked area, which helps, but once I've gone through this whole process, I don't think I've saved any of the time my template was supposed to save.
    file://localhost/Users/troubleinthemaking/Desktop/PRINT%20MINI%20EXAMPLE.pdf
      My questions are these:
    Is there any way to link to elements within the same file? Like from a different artboard?
      I've successfully 'Placed' an artboard from the same file, back into that file (but a different artboard), but this creates a never-ending Save/Update loop. I'd like a better way to do this.
    Is there a way to have all instances of a linked file, draw from the same place? i.e. When you update a single link, all instances of that Link would update. plus this would, in theory, cut down on the file size.
    Is there any way to automatically have every masked link crop itself after using the flatten transparency command?
      Even if I had to select them first. I haven't had any luck selecting them all and then using the pathfinder crop tool. I've had to do each one individually.
    I know this last one can't really be answered without seeing everything on my machine. I don't even know what info I'd need to give...
    WHY MY FILE SIZE SO BIG!
    Thanks ahead of time.
    -Jefferson

    Jefferson:
    There's a few things you can do to make your files smaller, such as using the Action "Delete All Unused Panel Items" which will removed all unused Symbols, Graphic Styles, Brushes and Swatches from your Illustrator files. Those little items add up to bloating a file.
    You also need to examine the images that you place into your Illustrator file. Any unnecessary layers or channels? Can the files be flattened before being placed in Illustrator? You can always keep a "working" Photoshop file of all that extra goobledeegook and then flatten the file and do a "Save As" and place that in the Illustrator file. And that could be a Photoshop EPS saved with a TIFF Preview and JPEG Encoding (Maximum Quality), which will save some MBs.
    But, you should never sacrifice file size for quality. If these files are going to print, you should be using an FTP program to transfer the files and not email them. Email should not be used for files over 5 MB. If all you want to do is send the customer a Low Resolution PDF Proof for approval via Email, that's fine and dandy, but send the final large size files to the Printer via FTP.

  • Logic for DC selection for authentication within the same AD site

    Hello All, I am working on extending AD service from an existing data center to a new data center. As part of co-existence, I have created new DC's in the new data center but kept them as part of the AD site in the existing data center. Both the data centers
    have a 1 GB connectivity.
    What I would like to know is - would there be any internal logic in calculating which DC should a client authenticate against based on network latency or something like that ? I wanted to know if there was any way I can restrict the user workstations at
    the existing data center location (which is also the HQ location) to authenticate against the DC's available locally instead of travelling to the new DC's at the new data center, within the same AD site. I cannot make the new data center a separate AD site
    for now due to the migration challenges.
    Any inputs would be highly appreciated. Thanks in advance.

    Hi Goldy,
    I will recommend you to create a separate AD site and configure sites and services accordingly, if you dont want clients to authenticate against the new DC.
    DC locator is the service name which is responsible for assigning a logon DC to the client.
    If the DC's are in different sites you can configure the sites and services to point the client to correct DC in a site. AD authentication always distributed based on the sites and services you configured.
    You can configure ldapsrv records to authenticate against specific DC.
    Domain Controller Locator : an overview
    http://blogs.technet.com/b/arnaud_jumelet/archive/2010/07/05/domain-controller-locator-an-overview.aspx
    How DNS Support for Active Directory Works
    http://technet.microsoft.com/en-us/library/cc759550(WS.10).aspx
    LdapSrvWeight & LdapSrvPriority
    http://blogs.dirteam.com/blogs/carlos/archive/2006/05/10/How-to-lessen-your-PDC_1920_s-load.aspx 
    http://technet.microsoft.com/en-us/library/cc816793%28WS.10%29.aspx 
    How
    Domain Controllers Are Located in Windows
    http://support.microsoft.com/kb/247811
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Finding the related field for "Leave Type"  from the BI content in HR modul

    Hi good after-noon!!
    Can any one help me out in finding the related field for "Leave Type"  from the BI content in HR module?
    Regards,
    Suman.

    Hi Suman ,
       U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
    Regards
    vamsi

  • I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

    i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
    now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
    i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
    please guide

    You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device).  There is no requirement that you use the same Apple ID for purchases and for iCloud.

  • How can I create multiple versions of a video within the same project?

    OK...this is a probably a very basic question but I'm not sure how to word it clearly.
    How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
    Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

    How can I create multiple versions of a video within the same project?
    You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • In Pages, is there a way to have both portrait and landscape pages within the same document?

    Question: In Pages, is there a way to change the orientation within the same document so that one page is portrait and the next page is landscape, for example?

    Hi Vicki,
    You can rotate in Preview. See this discussion:
    Re: rotate second page so will print as booklet
    Regards,
    Ian.

  • Linking to an anchor within the same page

    Anyone know how to link to an anchor within the same page?
    For instance, im making a FAQ page. at the top of the page I would like to list all the questions. i would like the viewer to be able to click a question which brings them to the answer on the bottom of the page.
    looked in inspector couldn't find it. linking to anchors is pretty basic, so id be really suprised if iweb doesn't have this feature. so im assuming im missing it.......
    how do i do this?

    Anyone know how to link to an anchor within the same page?
    how do i do this?
    Linking to an anchor within the same page is no more than scrolling to it, and can be (easily) emulate with javascript window.scroll function.
    See my post here: http://discussions.apple.com/thread.jspa?messageID=7676908&#7676908
    All javascript is linked to the example page.

  • Moving photos between rolls within the same library

    I'm sure this question has been answered along the way in discussions, but I couldn't find it, so I'll post this. In iPhoto 6, within the same library, how does one move photos from one roll to another? I imported a couple of pictures which created unique rolls for each picture. I want to move these pictures to an existing roll, and delete the created rolls. I'm sure the answer is simple, but I can't figure it out!

    In the View Menu, check to enable Film Rolls
    Then drag the pic to the header of the actual roll.
    Regards
    TD

  • Using || and && within the same Powerpivot Calculate syntax

    hi. i'm trying to isolate two groups of users. the 1st is a group who has suffered one of 3 "negative" experiences, without regarding whether or not they also had "positive" ones - i.e., they are the users from the entire population,
    who encountered one of 3 negative statuses in their user lifetimes. 
    the 2nd is based on this group, but users who have ONLY encountered these bad experiences, and never any good experience. for some reason, when i use && to "trim down" the positive statuses from the user group, i end up with the same size
    groups, i.e. the following two codes yield the same powerpivot measure result: 
    =CALCULATE(DISTINCTCOUNT(CDRs[USERID]), 
    CDRs[disposition] = "negative exp 1" || 
    CDRs[disposition] = "negative exp 2"|| 
    CDRs[disposition] = "negative exp 3")
    =CALCULATE(DISTINCTCOUNT(CDRs[USERID]), 
    CDRs[disposition] = "negative exp 1" || 
    CDRs[disposition] = "negative exp 2"|| 
    CDRs[disposition] = "negative exp 3"&&
    CDRs[disposition] <> "positive exp 1"&&
    CDRs[disposition] <> "positive exp 2"&&
    CDRs[disposition] <> "positive exp 3")
    i would love some help on this...
    thx!

    Hi Guy,
    A first stab could be...
    Users with Negative Feedback Only:=
    CALCULATE(
    DISTINCTCOUNT(CDRs[USERID]),
    CDRs[disposition] = "negative exp 1"
    || CDRs[disposition] = "negative exp 2"
    || CDRs[disposition] = "negative exp 3",
    FILTER(
    VALUES(CDRs[USERID]),
    CALCULATE(
    COUNTROWS(VALUES(CDRs[USERID])),
    CDRs[disposition] = "positive exp 1"
    || CDRs[disposition] = "positive exp 2"
    || CDRs[disposition] = "positive exp 3"
    ) = 0
    This solution can almost definitely be re-written more optimally to avoid using a FILTER but should do what you're asking. Let me know if it works as expected and performs acceptably over your data set. The FILTER and inner CALCULATE are just filtering
    out users that have at least one row with positive feedback. I've assumed that this is for a Calculated Field and the syntax is for defining one within the Calculation Area beneath the table in the Power Pivot window.
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • Illegal cross join within the same dimension caused by incorrect

    Hi,
    I created a logical table from 2 different Physical tables. Then I created a Dimension out of this logical table.
    At the BI Answer, while I tried drilling on the dimension, I get the following error:
    “Illegal cross join within the same dimension caused by incorrect subject area setup “
    Please let me know if there is any work around this issue.
    Thanks,

    I think that OBIEE try to do a cross join but don't allow it
    http://gerardnico.com/wiki/dw/join/cross_join
    It generate surely a join with two tables where you don't have any condition or relation in the physical layer.
    When you check the column from the subject area are you sure that you have a condition in the physical layer for the two tables ?
    When you say "I tried drilling on the dimension", does it means that you have a report and when you click on link which come from a dimension level, it doesn't work ?
    Regards
    Nico

Maybe you are looking for