Question/Request in camera locked images

On tight news deadlines I often do my edit in camera by locking/tagging the best pictures that I want to import quickly - often just a dozen or so from hundreds of RAW frames. I do not want to sit and wait while hundreds of RAW files are loaded into Lightroom.
It appears Lightroom 4 still does not recognize locked images on the import screen, unlike Aperture and Photo Mechanic.
I want to be able to import only those locked images that i selected in camera. And/or be able to import every image and select the locked pictures within the Library.
At the moment I get round this by using Photo Mechanic to select the locked pictures (without importing) and dragging them all over into Lightroom where the import box shows my selections, and i just import the few selected files.
Anybody else work this way?

As this forum is focused primarily on the beta version and its new features/bugs, you'd be better to log your request on the official feature request forum here: http://feedback.photoshop.com/photoshop_family/ I have a feeling I've already seen a similar request there, so you might want to search for it to add your vote.

Similar Messages

Can I filter down to "locked images" in LR 5?

I shot a job on a Canon 5D mark II, and edited the job in camera by setting the program>set feature to lock specific images. Is there a way for Lightroom 5 to filter down to these "locked" images? Thanks

Unfortunately, Lr doesn't have any way of locking files and no filters to find them

HD video newbie question related to camera shooting mode

Hi everyone
I apologize in advance as this has been covered (sort of) but I cannot definitively answer my question reading other posts so perhaps your answers will clarify this for myself and future interested parties.
I am ready to purchase a Canon HF S100 VIXIA camcorder after looking at a lot of reviews.
I have iMovie9 and will be using this exclusively (I hope?)
I am aware that if I edit anything or add transitions or image stabilization the video will be downgraded to SD, this is not related to my topic.
Questions follow
The camera supports 24p Cinema mode and 30p mode. Both of these shoot at 24 or 30 frames per second in HD using 60i which I presume means that each progressive frame is encoded in two sequential interlaced frames which must be combined (or something like that). I would like to use this mode as it has much better low light performance and I have a lot of indoor use, BUT---
Will iMovie9 support this and display the video as a HD progressive scan frame or will it discard this information and keep it as 60i or fail or something else?
Thanks for your help.

Lionden wrote:
.. 1080/60i - recordings made with the PF24, PF30 frame rate are converted and recorded on the memory as 60i
afaik, most (all?) consumer camcorders, claiming '24p' (or Cinema or...), scale on export (or record) to 60i ..
for me, this '24p' is mostly marketing... 24fps is a historic 'standard' for film/celluloid. in times, when displays claim 200fps, .. why 24? why not simple 29.97/30p (or here: 25)...?

The requested object is locked by another transaction

Hi All,
I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
'The requested object is locked by another transaction'
Message no. MC602
Diagnosis
A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
Technical Information: The C_ENQUEUE routine returns the following values:
COLLISION_OBJECT = ERSMONFACT
COLLISION_UNAME = SINGH
System response
The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
Procedure
Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
I tried SM12 but there is no lock entry, can u suggest some thing?
Regards,

Hello,
here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
Here two things to look :
1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
2.GO to SM12 try to search the object there and remove the lock.
Thanks,
Deepak

Error in Extraction - object request is currently locked by BWREMOTE

Hi All,
I am facing an error when extracting the data from R/3.
Error message: Object requested is currently locked by BWREMOTE
Message no. MC601
Diagnosis
A lock requested by calling an ENQUEUE function module cannot be set up because another SAP transaction is using the lock in question.
Technical Information: The C_ENQUEUE routine returned the following values:
COLLISION_OBJECT = ERSENQUEUE
COLLISION_UNAME = BWREMOTE
Has any body come across with this error? If so could you please let me know how to resolve this error.
Thanks beforehand,
Praveen

Hi Praveen,
To make it easier to find what is causing this locking problem, it would be very helpful to enhance the short text of message MC 601 temporally. This should return the object which has caused the locking problem.
Go to SM30 input table T100 -> message class MC -> message# 601
Replace: Object requested is currently locked by user &
with: Object &2 requested is currently locked by user &1
Please also see SAP Note 673940 which addresses MC601.
Rgds,
Colum

Photoshop Elements Help | Processing camera raw image files

This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/using/processing-camera-raw-image-files.html

gegjr wrote:
When I selected "Save Image" there is an option to select the size of the JPEG preview. Is there anyway to extract the JPEG and does the JPEG contain the adjustments that were made to the Raw image?
The "Save image" command just saves (really converts) the original raw into another raw format : the DNG format created by Adobe to get a universal raw format instead of a specific raw format for each camera in the range of each camera manufacters... Using that feature is your choice.
And what you see in the bottom line : 8 bits or 16 bits has nothing to do with a preview, it is the choice of 'color depth' for the image the converters sends to the editor.
So, your choice is either :
- to click 'Done' which saves the settings of your conversion (white balance, exposure, clarity...) to a very small 'sidecar' file of the xmp type
- to 'Open' in the editor where you can work with all features of the editor (which include saving the output file in any format - jpeg - psd - tiff - png...
http://forums.adobe.com/thread/1030798?tstart=0

Help with Video camera lock ups on K7N2 delta

hi everyone,
finally got new computer working after formatting and reinstalling windows and the bare minimum of software.
but a small problem arose after drivers from supplied CD Rom installed my Sony DV camera locks up.
i haven't even installed any video editing software yet.
before installing drivers, when i double clicked the camera icon in my computer it gave me access to the camera i.e i could press play on the camera and view it on the computer.
now since the drivers have been installed the message that i get is 'please wait while device initializes'.
then 'program not responding' is displayed.
my configuration is
K7N2 delta
AMD XP2000+
crucial 512mb PC2700
Radeon 9200
belkin firewire card
trust V92 modem
any help would be much appreciated as the new computer sole purpose is to video edit.
cheers everyone

I have the same problem and have a very old MoBo 266Pro board, I have a different camera it's a Samsung dp-s103 or something like that, whenever I try to capture some movie the program lock ups and I have to =restart the PC. I tried taking out the PCI cards and left only the firewire PCI card I was able to capture about 16 minutes of video, but it still locks up. I will try the latency patch and a bios upgrade. Will then see how everything turns up. I've also tried this on an old computer with an Intel chipset, 733Mhz processor and it worked fine, so this must be either a chipset problem or MSI didn't manufacture these board well.
Best regards
PS. I think that my new system will be a pure intel one :(

How can i get lock image in internet explorer which is getting in mozilla

hi ,
iam getting the lock image in mozilla for the login page and iam not getting the lock image for the same page which is accessing from internet explorer 6.0 can any one help me out.........thanku

you don't. full screen image is no longer availab.e.

When releasing a transp. req.not all object in the request could be locked

When trying to release a transport request I get error message that "not all object in the request could be locked. Do you want to release them anyway"
I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
If I release the transport anyway what could happen?

Hi Tina,
If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
1. Go to SE10 and click on create button
2. u will get a popup select the 3rd radio button(ToC)
3 Give the decsription of the Tp
4. u will get anext screen here in menu select request
task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
Regard
Anees Ahned

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

Camera raw images change colour in adobe bridge

I have photoshop CS4 and import my camera raw images into Adobe Bridge. When I view the thumbnails in bridge my raw images look vibrant and exactly like they appear on the camera but when I go to open them in camera raw edit they change colour and look washed out before I've made any changes. Can anyone help me figure out how to correct this?

ssprengel wrote:
My camera is set to shoot sRGB JPGs and is set to all zeros for the brightness/contrast/saturation parameters.
What is your camera set to as far as these basic toning settings, as well as any automatic things like DLighting or highlight compression and perhaps any custom curves or whatever that is called for Nikons?
First paragraph - so is mine.
Second paragraph - all other settings are neutral/zeroed/turned off, as per my post to which you responded. That is, no additional tone curves - Active D-Lighting turned OFF (why anyone would let the camera decide what to do do with highlights and shadows is beyond my level of trust) , Jpg compression is Optimal (least possible) et cetera.
Think I now have an explanation for the different displays in ACR (and Bridge) that I have been experiencing. Took a new duplicate Jpg/Raw shot with the in-camera Picture Control set to Neutral. Now, when both the Jpg and .NEF Raw are viewed in ACR, with the ACR Camera profile set to Camera Neutral, they appear, ASAICT, identical. Saved Camera Neutral as the default ACR Camera profile. Now back in Bridge, the images also appear pretty much identical.
I think what was happening previously was that I had failed to save Camera Standard in ACR as the default Camera profile, and it was defaulting to Adobe Standard, and hence it was rendering Raw thumbnails for Bridge to that Camera profile - hence the difference in appearance between the Jpg and Raw in Bridge. Unless I have got it completely wrong, I think my problem is now solved.

Cannot open camera RAW images from Sony DSC-RX100M3 camera. Working on a Mac in Photoshop CS5 and have camera raw 6.7.

Cannot open camera RAW images from Sony DSC-RX100M3 camera. Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

Bruce,
When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
http://www.luminous-landscape.com
I think a lot of stuff there to get you seriously going. Another one is:
http://www.computer-darkroom.com
I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
Jump in both feet! you won't be sorry. And these forums are the best help you can get.
Good luck,
Rob

Error in SMQ2 - Object requested is currently locked by user ...

HI together,
we send IDOCs from SAP R/3 through XI into an other SAP R/3 system (ORDERS). all messages will be processed but only 2 messages are get stuck in XI with the error message:
"Object requested is currently locked by user" in SMQ2.
Do anybody know a solution for that?
If i trigger the IDOC in WE19 again, the same error occurs again and again.
Many thanks
Alex

HI together,
very strange happening!!
i check the mapping of the error message and found out that we have a used a multiply function in the mapping (quantity * price). we have a price > 100000.00 and a quantity of 3. In testtab the mapping runs and runs and runs... nothing happens.
i created u UDF that solve the problem. i do not know why this is needed or what is wrong the the SAP standard mapping function.
Unfortunately we have this issue only in production, not in DEV or QA.
cheers,
alex

Why am I getting a blue box with question mark instead of logo image? It happens in my signature (in gmail) and in mailchimp (again, only with the logo).

Why am I getting a blue box with question mark instead of logo image? It happens in my signature (in gmail) and in mailchimp (again, only with the logo).

The question mark in the box, if it looks like this: means that safari cannot find the linked image. On windows machines, this would be the equivilant of the small "page-with-a-red-X" logo that appears in the same scenario. Check the reference to the image and make sure that the image is in the correct location, and is accessable by the reference.

How to get network IP camera of images or media ?

Please tell me how to use jmf to get network IP camera of images or media?
if you can provide source code, send me please
my e-mail: [email protected]
thanks!!⊙ω⊙

Hi
m also doing almost same work..wht u r tryied to do. I got the JMF-code, which capture video from webcam & split it in to Frame. But don't know how to capture video from ip-camera.....Can u help me...???

Question/Request in camera locked images

Similar Messages

Maybe you are looking for