Question: Saving Image Files In The Repository

Good Morning all,
(Running CR2008)
I have a few image files that I have saved in the Crystal Repository. It works nicely and I've tested it pretty thoroughly to make sure that connected images update across the board. It's a convenient little feature.
Here's my question ... when you save an image file to the repository, it automatically converts the image file to a Bitmap file type. Bitmaps greatly increase the size of whatever .rpt file uses the iimage. My standard .rpt files go from about 240K to 3.4 megs. This isn't really the biggest deal in the world, but I was wondering if there is a setting that I can check that will have the repository files automatically save in JPEG format, or just keep thier original format (JPEG in this case).
Any thoughts? Or are we stuck with the Bitmap format? If so, this might be a good subject for a 'feature request' post.
Thanx in advance for any help.
-TS
Edited to add: Sorry about the double-post. I have no idea why that keeps happening. -TS
Edited by: Tom Salvato on Jan 19, 2010 2:45 PM

Stuck with BMP

Similar Messages

ODWA: Unable to call image file from the Repository

Hi,
I've followed the instructions to create diagram images using Netscape Composer for creating hotspots without success. I uploaded the JPEG file into the Oracle Designer Repository and referenced it as {REP_FILE=CDW 2000(1)/BKG.JPG}. The image does not appear on the Graphics Manager. If I save the image to a webserver directory and referenced it by a URL then the image will appear. How do I correct the issue with referencing the images from the Repository?
Thanks,
Deidre

Deidre,
I need to know a bit more.
If you add the REP_FILE line to description or notes you will see the images in the report section not in automatically in the graphics manager. Do you see the image in the report section? If not what does it say on the place where you expect the gif.
Of course if you go to the graphics manager and you select the file using the browse button it should show the image (mind you that the REP_FILE has nothing to do with this). If you not see the file you first must find out if you are able to see the image if you approach it through the ODWA Navigator/Reports? If not you might have a problem with the down/up load functionality and then you might need to check your installation.
We have changed this functionality in the 6.5.0.16 patch release which is available through the supplement option.
Regards,
Ton
I've followed the instructions to create diagram images using Netscape Composer for creating hotspots without success. I uploaded the JPEG file into the Oracle Designer Repository and referenced it as {REP_FILE=CDW 2000(1)/BKG.JPG}. The image does not appear on the Graphics Manager. If I save the image to a webserver directory and referenced it by a URL then the image will appear. How do I correct the issue with referencing the images from the Repository?
Thanks,
Deidre

Saving PDF files as image files using the Preview application

I'm converting PDF files into image files for use with OCR software. The problem is that changing the pixels/inch option from 150 to say 300 does not improve the resolution of the resulting image file. E.g. if I save at 150 p/i and then 300p/i both image files are the same size and resolution. I've tried JPG, JPG-2000, TIFF, and GIF. All produce the same fuzzy result. What am I doing wrong?

The schematic file is made up from vector graphics. There are no images embedded in it. For some reason the OCR software (PDF pen) will not recognize the vector drawn characters near the various components. e.g. There may be a resistor with "R5" written next to it. This is the resistors designator. The designator is what I am trying to do the search on. Since PDF pen can perform OCR on scanned (image) documents I thought that turning the PDF schematic into an image file e.g. JPG using Preview would do the trick. Unfortunately as I have already mentioned I can not seem to get Preview to improve the resolution on the resulting image file - the OCR software struggles to recognize any print.

Question re: Image Files

OK, probably a simple question (and one that I can probably
figure out on my own, by testing it), but when selecting an image
file from an outside directory, does RH generate a copy of that
file in the working directory for the project? For example,
"image.jpg" currently resides in "C:\images", while my RH project
exists in "C:\RHProject"... When I select image.jpg from C:\images,
is a copy of it generated in C:\RHProject (and the image reference
for it set accordingly)?
I ask because, I currently have a "C:\images" directory,
where I've been saving all of my generated images and accessing
this directory from RH. I just today was cruising around the file
system, and I noticed some of the image files in the RH project
directory, as well... but not all of them. The thing is, my project
is huge, and I have hundreds of images. I don't specifically
remember which images are used and which are trash (i.e., whether
or not I re-worked or replaced some of them). Anyway, I really
don't want to have to perform a manual search between each
directory to verify... So, theoretically if all valid images are
copied to the RH working directory, I can just delete the images in
my "C:\images" folder.
Thanks for any feedback
- Chris

First, yes RH does copy all the images to within the project.
Second, if you are in any doubt, rename c:\images to
something like c:\zz_images. Drops it to the bottom of your folder
list but keeps it while you check.
Third. Go to Tools | Reports | Images and it will show you
all the images used. Go to Tools | Reports | Used Files and it will
show you all the files used. You can audit one to the other to
prove they are all in the project. Easier though is that after
renaming c:\images, look through the images folder in Project
Manager and just make sure there are no red Xs. (There won't be)

How do i disable the open/save image dialog box in firefox? I want to directly save the image file to the drive.

How do i disable the open/save image dialog box in firefox? I want to directly save the image file to the drive without clicking on save option everytime when saving an image. I'm using firefox ver 35.0.1 for windows 7.

Click on the Firefox menu. Then click "Options". Go to "Applications" tab. Search for jpg and png file type. You will find they have "Always ask" action attribute. Change it to "Save file".
Hope it will work fine for you.

HT5678 I have problems saving pdf files in the web when I use Safari. I don't have this problem with firefox

I have problems saving pdf files in the web when I use Safari. I don't have this problem with firefox.

do they save ok if Safari - Preferences - Security - Allow all other plug-ins is unchecked ?
If so, likely an adobe or other pdf plugin
Re-check the setting above & quit any browsers,
Look in this folder by triple-clicking the line below, then ctrl-clicking it & choosing Services - Open
/Library/Internet Plug-Ins/
remove anything with pdf in the filename & test again
Sometimes, plug-ins can be in the User Library folder :
~/Library/Internet Plug-Ins/

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Custom tag or help in reading an image file into the HTTP stream

Since under WL we do not deploy our app physically there is no physical
          directory to write our dynamic images to (via kavachart).
          I can call their bean with:
          response.setContentType("image/png");
          ServletOutputStream output = response.getOutputStream();
          but that only allows the image back not the housing page. I can use an
          iframe but there are other issues and was wondering if anyone has idea on a
          custom tag the can easily read a physical directory outside of WL's space
          and include an image file in the http stream. Our app server and webservers
          are in separate zones so I can not just write to some virtual directory on
          the webserver and then serve it up w/ a simple <img> tag.
          BTW Kavachart has some tags referred to in their thin doc but I did not have
          good luck w/ their suggestions.
          Thanks in advance.
          dmg
          [email protected]


Hi joe.com,
Thanks for the response. It's greatly appreciated. Actually, I'm trying to run this on an Nokia SDK (s80 emulator) and eventually a windows mobile emulator.
I was wondering if the JSR is the problem. I'm currently using jsr 62 and I'm thinking of trying to 216 to get PP 1.1. I'm wondering if 62 maybe limiting file io?
any help is appreciated.

How to read and paste an image file in the Adobe Indesign document by using plugins?

Hai i'm senthil...
i had just now started working with Adobe Indesign plugins...
Can any one tell me how to read an image file from the hard disk and paste that image file in a text box in the document...
plzz send me the codings and in which file we want to attach these codings...
thank you..
bye
senthil

hai art,
thanks for ur reply...
i tried and developed the program for pasting the image from
the database...
But now i want to paste 3 images in a page...
for this i had used while loop;
But i'm having 6 images in the database...
when the 4th image is in reading, automatically a new page will
be created and the 4th image will be pasted in the newly created page.. i tried and develped for creating a new page...
But how shall i paste the 4th image in the newly created page...
is there methods or classes?
plzz reply...
thanks..
senthil..

FCP is saving render files in the trash

FCP is saving render files in the trash,. Why? How cant i change this

video capture, audio capture, video render and audio render all checked and set to- work drive/my project folder.
Waveform cache/work drive/my project folder.
thumbnail cache/work drive/my project folder.
autosave vault/work drive/my project folder.
inside the project folder i have 11 subfolders
Audio Render Files
Autosave Vault
Bounces
Capture Scratch
Live type
motion
Prorez
Render Files
Thumbnail Cache Files
Tunes
Waveform Cache Files

Can Aperture trash the image files (in the finder) that I don't want?

Hi All,
Long time iView Media Pro user here and fairly new to Aperture.
One of the things that I like about iView (and I can't seem to figure out in Aperture) is that I can trash an original file that I do not want to keep from within the app.
iView actually moves the image file to the trash. This allows you to import all of the images, review them, and trash the ones you don't want to keep.
It appears that Aperture only trashes the Master (and versions) that it creates in the library and does not physically trash the original files.
Is there something I am missing here?

<...>
It appears that Aperture only trashes the Master (and
versions) that it creates in the library and does not
physically trash the original files.
Is there something I am missing here?
I think the thing that you are missing is that after import, you should delete your master files in Finder and just leave the ones in the Aperture library. Then when you remove them they are really gone. You can always use the "Export Master" command to get thme out again (untouched) or simply go into the Aperture library and do a find for all images to see them and move them elsewhere (if for some reason you cannot run Aperture).
One possible flow to make this esier is to always have Aperture import files from CF/SD cards, then format them after import (well, after import and then backup...)

How to start the Toshiba Ghost image files from the HDD

Hello
Ok this is a tough one but hopefully some tech/wizz can help me out.
I have all the necessary CD Recovery disc but my Toshiba laptop CDRom has died and i'm looking for replacement at the moment.
I have managed to copy the image files and all the other info from these CD's onto the laptop hard drive via a network from my desktop cdrom. I did try to use the desktop cdrom to boot the 2.5" laptop drive but it knew it wasnt a toshiba laptop so wouldn't let me recovery.
However now I have manage to copy all the ghost image files onto the laptop hdd I'm stuck on how to run installation via dos.
The laptop hdd is formatted and all i have are the following files
span.bmp
setenv.bat --------> batch file contains following lines
@ECHO OFF
SET GHOSTPAR=
SET SWN=01237000
SET EXT=GHO
SET VOLLABEL=%SWN%
SET FILENAME=%SWN%.%EXT%
01237001.GHS------> PART 2 OF IMAGE
01237000.GHO -----> GHOST IMAGE MAIN
01237000.CRC
A folder called G_INST
which contains 3 extra folders BMP, DOS and TOOLS and span.bmp
I cant figure out how i can run ghost to extract and recovery my HDD can someone help me :)
Thanks in advance
Simon

Im really skeptical if you will be start the Toshiba ghost image files from the second partition without using the Symantec Norton Ghost software.
I have created a ghost image of the C partition and placed it on the D partition.
To recover the C partition I have to start the Ghost Utility and have to use the image file .gho from D partition
I have googled a little bit and found the useful instruction how to recover the Portege M3500 without using an CD/DVD drive. Maybe this will run also on the Sat A30.
http://mobilepcwiki.com/mpc/index.php?title=Toshiba/Portege_M3500/FAQ
By the way: the internal, compatible ODD can be ordered from the ASP in your country!

When saving certain files get the error "Error saving file..."

When saving certain files get the error "Error saving file..." Seems to have trouble saving the temp files. tried dumping my workspace and prefs. No change. Other files work fine.

Try deleting the iPod Photo Cache folder. For its locations see:
iTunes: Understanding the iPod Photo Cache folder

Saving Image Files on Disk after drawing lines on the Image

Hi guys,
I am presently working on a swing project in which I need to draw lines on a image and then store the modified image in .gif, .jpg or .bmp file format.
I can't seem to find an documentation dealing with this situation.
Any help will be highly appreciated
Abhi

Ive just been looking for the same. Theres an article (and a class) on javaworld on subject of saving bitmap-files, and in another thread in this forum, a guy described how to make jpg. with the jdk1.4 .... Like this:
int w = comp.getWidth();
int h = comp.getHeight();
BufferedImage im = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
Graphics2D g2 = im.createGraphics();
comp.paint(g2);
g2.dispose();
ImageIO.write(im, "jpeg", new File("foo.jpeg"));
im.flush();
Im just referring, havent tried it yet. Good luck.
Stig.

Downloading image files from the server and saving them on local disk

Hello,
In an AIR app. i want to download number of image files,i have paths
in an array.I am looping through the array and using URLLoader.Format
is BINARY,now on the complete event of one file i dont know how to
store the file on the disk as exactly which file has dispatched the
event is not known.Please point out if my approach is incorrect or if
any other ideas -plz share.

Try the following:
var imgURLs:Array = new Array();
imgURLs[0] = "http://www.adobe.com/ubi/globalnav/include/adobe-lq.png";
imgURLs[1] = "http://www.adobe.com/images/shared/download_buttons/get_adobe_air.png";
var urlRequests:Array = new Array();
var urlLoaders:Array = [];
for (var i:int = 0; i < imgURLs.length; i++)
    loadURL(i);
function loadURL(i:int):void
    var urlReq:URLRequest = new URLRequest(imgURLs[i]);
    urlRequests[i] = urlReq;
    var urlLoader:URLLoader = new URLLoader(urlReq);
    urlLoader.dataFormat = URLLoaderDataFormat.BINARY;
    urlLoader.addEventListener(Event.COMPLETE,
                function (event:Event):void
                    var path:String = urlReq.url;
                    var urlLoader:URLLoader = event.target as URLLoader;
                    saveFileData(path, urlLoader.data);
function saveFileData(path:String, data:ByteArray):void
    trace(path, data.bytesAvailable);
    // I'll let you write the code to save the data to a file path, based on the URL.
You could also create a class that includes the event handler function and includes the code for loading the data. Then create a new instance of that class for each URL.

Question: Saving Image Files In The Repository

Similar Messages

Maybe you are looking for