Question Slide Failure Levels Issue

I have 2 rather large assessments that I need to edit TODAY
UGH! of course! They were originally meant to only give the user 1
attempt at each, and therefore 1 failure level. The question slides
were imported from various projects, and changed to 1 attempt/1
failure level, and various other things were changed about the
formatting. Now, the decision has been made to allow users 3
attempts at each question, and therefore 3 failure levels. When I
make this change, publish & test, the question allows me one
attempt, and continues to the next question!!!
Please help!!
Thanks

We decided to just allow the users to review the quiz, and
leave the questions at 1 attempt/failure level each - at least for
now. Adobe support told me the question slides were corrupted, and
that I could recreate them by inserting new question slides, which
apparently worked for them in the testing. Of course, since I don't
have the time to completely recreate the entire assessment, I have
not done that.

Similar Messages

  • Navigation issues with question slides in Captivate 6

    In earlier versions of Captivate (5.5) we have always been able to insert question slides into our projects as checkpoints and allow the user to freely navigate through the project and answer the checkpoint questions as often as they like. We have also been able to provide success and failure feedback popups for those question.
    In Captivate 6 we are seeing that question slides can apparently only be answered once and do not reset to be answered again the next time the user navigations to those slides. We want to allow the user to answer checkpoint questions as often as they like and we need to be able to provide success and failure feedback popups. We have tried every imaginable combination of setting with no success. Has anyone else been experiencing this or have a solution to this problem?
    Thanks,
    Vernon . . .

    When I run the same projects with the exact same settings side by side in Captivate 5 and Captivate 6, in the Cap 5 project I can navigate the project freely and answer the checkpoint questions repeatedly as often as I like. As I navigate the questions are reset and can be answered again every time I enter the question slides.
    In Cap 6 the questions are locked after the first answer and cannot be answered a second time. Even stranger is the fact that when tested using only a subset of the slides adjacent to the question slide (next 3) it works and does appear to reset the question allowing repeated answers, but it fails when the entire project is run.
    I have asked our other developers to test this and they are experiencing the same problem with their projects.
    The only difference I can see between the two projects is that the Quiz results slide in Cap 6 cannot be deleted whereas it does not exist in the Cap 5 project ???

  • Layering issue with Question Slide and animation

    I have an animation that i would like to use on a question
    slide, the problem is that I cannot get the animation to appear at
    a higher level than the question text (it is set on a higher level
    in the timeline).
    The result is that the question text always appears on top of
    the animation - is there a way to adjust this. The right click menu
    where i should be able to click "bring to front" for the animation
    is greyed out.

    Folks, the Question-slide is a pretty finicky animal - to
    those who think all objects can be modified in Flash, especially.
    Mostly, it behaves well if you just want to change fonts or add a
    background image within the Captivate environment. But you both
    seem to want to edit is as if it were an object on a FLA stage, and
    I doubt you are ever going to be happy - at least not with the
    current or any past versions of Captivate.
    The only advice I can give either of you is to adjust your
    expectations and/or demands to what Captivate
    can do, instead of what you think it
    should do, based on your experience with some other software
    application.
    That said, maybe some Flash expert will come forward with
    just what you want, so don't be discouraged by my experiences, as I
    am hardly a Flash user even at just-past-noob-stage.
    Good luck!
    .

  • Single question slide issue in captivate 6

    Hi,
    I am new to captivate 6. I need to achive following functionality:
    1. Single check point question slide without result page which will be MCQ or any type of question.
    Consider the sinario for MCQ question
    2. If user doesnot select any option, he should be informed about the same (which is happening at my end but not more than 1 time even after the attempt count is infinite)
    3. There should be next button in disable state
    4. if user selects wrong answer and click submit, he should get wrong feedback without the whole screen patch. He will click on retry button to close the feedback and reset the question
    5. if user click on right answer and click submit, he will get right feedback and next button will get enabled
    6. This Question should reset everytime you visit the page.
    Let me know if this is possible in captivate 6?
    Thanks,
    Omkar

    Try clearing your browser cache.  You may not be seeing the current content.

  • Button issues on Question slide

    Hi there
    I have a simple quiz in my project which the users can skip
    if they want to. I want the users can go Back from the question
    slide. The back button works for the first time taking to the
    previous slide(not a question slide). But when i again want to come
    from the slide to question slide the Next button which i have added
    stops working. Strangely if i dont have a question slide the Next
    button works fine for simple slides.

    Thanks ravi
    but i dont want any report for the quiz. It is a small
    project for which i have inserted 2 question slides. Just want
    users to try if they want to and if they press the correct option
    they move on and even incorrect they move on...nothing to do with
    scoring or reporting.

  • Question Slide Issues

    Hiya,
    Firstly I have to revisit something that I know has been
    asked before:
    Is there no way to amend the default Question Slide Format or
    do we really have to format each question individually?
    Secondly, having gone through the pain of formatting each
    question, Backgrounds, text locations & colours etc. Is it
    possible to format the question review area? The default black
    & white jars horribly with our corporate background.
    Finally for now, the Review area itself - it does not seem to
    want to behave, it is not constrained by the placeholder that
    appears on the question slides? Do we need to give it the whole
    width of a slide to display itself without crashing into other
    onscreen elements?
    Cheers
    Mountainboy - sadly, miles away from a decent mountain right
    now....

    Hi MountainBoy
    Yes, each question must be formatted individually. However,
    if you would like to make the developers aware that you would like
    to see more customizability with these, please
    click
    here and complete the wish form.
    No way I'm aware of to influence the review area. See above.
    Cheers... Rick

  • Question Slide Buttons

    I have an assessment that I created that uses a combines
    question slides with interactive slides. I would like all of the
    slides to uniform. The question slides were automatically created
    with buttons to Back, Skip and Submit. These slides also added a
    review area and a text box with question 1 of 15. I would like to
    add these items to the interactive slides, but the program does not
    allow these items to be copied. Can these items be added to a slide
    not created as a question slide? If so, how is this done?

    Hi Carol
    Taking your questions one by one:
    -- You can change the standard quiz question buttons (Clear,
    Back, Next, and Submit) by double-clicking them and changing the
    button settings. This enables you, for example, to change them to
    Image buttons (as in Rick's demo).
    -- You can't remove the navigation (defined on the Options
    tab in the Question properties dialog) from the Success and Failure
    captions -- it is built in
    -- You can't add your own custom navigation buttons to quiz
    questions using buttons or click boxes -- these options are greyed
    out on question slides -- so you have to make use of the regular
    quiz question buttons
    -- The difference between the Skip (sometimes labelled Next)
    button and the Submit button is that it navigates directly to the
    next slide without submitting an answer to the current slide. When
    the button is labelled Next, users often click this button in error
    without realizing that they have failed to submit their selection
    as an answer.
    -- I'm afraid I have no experience of the blue asterisks
    resulting from the hot spot Quiz slides. I'd be interested in what
    others have to say about this issue.
    Best regards,
    -Matthew

  • Failure level 3 caption box appears twice?

    Sorry for the multiple posts, but I really need an answer to this.  Any ideas?
    My scenario: I have a graded single response multiple choice question with five answers.  If correct, Jump to Slide 3.  If wrong, I allow 4 attempts with 3 failure levels, Jump to Slide 2 for remediation.  It acts like this.
    Select first wrong answer, Submit, get failure level 1 caption, click anywhere to remove caption;
    Select second wrong answer, Submit, get failure level 2 caption, click anywhere to remove caption;
    Select third wrong answer, Submit, get failure level 3 caption (which reads "Last chance"), click anywhere to remove caption;
    Select fourth wrong answer, Submit, get failure level 3 caption again (still reads "Last chance"), click anywhere to jump to slide 2.
    Is there a way to prevent failure level 3 caption from displaying the second time?
    Thanks in advance,
    Anne

    Vicky,
    I think its the AttrValException you are hitting. In that case it is the expected behaviour of the Exception.
    Thanks

  • Adobe Captivate 5 - Quiz stopping after leaving question slide to go backwards

    I'm trying to force Captivate to do something I think it wasn't designed to do - Force the user to get 100% on a quiz. I've set the attempts to 'infinite' and customized the retry messages with little bits of information for the user. Currently, they can try the question as many times as they want until they get it correct but they cannot leave the slide even though there is a 'back' button available! I need them to be able to leave the question slide after attempting to answer the question, sort back through the information slides to learn the information, and return to the question slide to answer it correctly. The quiz stops entirely if you go backwards, then attempt to get back to the question slides.
    Forcing them to retake the entire quiz is not an option as this will likely frustrate the user, especially as one of our presentations includes 100 questions. Even setting the failure levels to 3 is not good because eventually, someone will miss the question entirely and have to retake the quiz.
    Any suggestions? Can this be done?
    I have a short demo with all my settings if anyone wants to see it.

    Hello,
    Yep, you are bumping onto the limitations of the current default Quizzes. If you allow multiple attempts on Question level, the user will not be able to leave the slide without exhausting those attemps or having a correct answer. If you allow multiple attempts on Quiz level, the Retake button will delete all answers and the user has to redo the whole quiz.
    The only way I found was by creating my own question slides. I even succeeded in making Quiz Retake function only for incorrect answers. This is however a lot of work and when I read the amount of questions you are providing...
    Lilybiri

  • Adding variables to match question slides

    Hi All,
    I am using Captivate 7 and need your help/idea/expertise on this. I am trying the following:
    Adding a drag and drop slide wherein I should be able to drop the source to any target.
    If the drop happens on the correct option (this is the challenge, how can I define the correct answer!), a message should flash saying "You are right"
    If even a single drop goes wrong, then I the right answers should flash, (this I can create a new slide though)
    But to set such conditions what should I exactly do? Please help.
    Thanks,
    Roja

    The title of your question is bit confusing. Why should you have to add variables to match question slides?
    The content of your question is totally different: each D&D slide can act as a question slide. It doesn't really have all the features of a question slide but most of them: Reporting, Score (only black/white, not partial score/penalty), Attempts, Actions On Success/Failure. When it is configured as a question its score will be reset when the user 'Retakes' a quiz with multiple attempts on quiz level etc. Progress quiz indicator will not be included however. And defining the correct answers is a breeze with the wizard or with the button Correct Answers.
    The best part about D&D are IMO the 'Object actions': you can specify an advanced action for each drag&drop act and that is what you need. Do not use a simple action, because it will release the play head. That action can show a feedback text/object that was previously hidden, it can apply an effect to an object like flashing, etc. This blog post was written for CP8, but can help maybe:
    Drag&Drop tips - Captivate blog

  • Can Retake Quiz button take me to 3rd question slide of the project?

    Hi,
    I am happy to join this forum. I hope anyone of you answer my question.
    I am using captivate 4. I am not storing score onto any LMS.
    I am developing an e-learning course of 30 slides. First 20 slides are content slides. I have 2 question slides as 14th and 15th slides. I don't want these 2 questions be part of my main Quiz which starts from 21st onwards which has 10 question slides. The quiz result page has "Retake Quiz Button" which is taking to the 14th slide which I dont want. Actually Retake Quiz button should take me to 21st slide only.(..and all the question slides in my course showing "Question x of 12". But I want this to show "Question x of 10" only). Because I have used 2 question slides (14th and 15th) to check the user for better understanding.
    Can anyone help me out.
    Thanks in Advance.
    Regards,
    Manoharan.A

    Welcome to the forum,
    Each Captivate file, if you enable scoring will report a total score, in your case the score of the 'pre' questions and of the 'real' questions. Same with the progress (which you can disable).
    Since your pretest only has 2 slides, to achieve your goal without having to create multiple files (pretest or final test separated from the main course), I would propose not to use the default Question slides for the pre-test, but to create them using standard objects, variables and advanced actions. This is perfectly possible for the most Question types, so which type did you use for the pre-test: true/false, multiple choice, fill-in-the-blank...? Instead of reporting the score the usual way (they get stored in the system variable cpQuizInfoPointsScored), I would store the results of the pre-test in a variable.
    Both your issues will be solved: when retaking the Quiz, since only regular Question slides are considered as a Quiz, you will be taken to the first Question slide and the progress will be as you want it to be.
    If you want to go this way, and need more help, please post your questions. I did publish some articles on use of variables and advanced actions but examples were made with CP5 (principles are the same). Captiv8r (moderator of this forum) has a gooberguide about Advanced actions (for CP4) that could be of great help:
    http://www.gooberguides.com/ProductPages/Captivate/CaptivateVariablesAdvancedActions.htm
    Lilybiri

  • Going back in tutorial renders unanswered question slides void

    Hi, I have looked through the last few months of questions and don't see exactly my issue.
    I have a Captivate 4 project that is linear and has questions (no scores reported to LMS) throughout to reinforce learning.
    When a learner gets to a quiz item in the series and wants to jump back to an earlier content slide (using TOC or back arrow on Nav bar--I don't have back arrow on Question slide itself.) they can't return to the question and take it. The question appears to be locked up and they get the error message below. This is a question they never tried.
    I don't put a back button on the question because I don't like to encourage that, but I do have on the Quiz settings to "Allow backward movement". If that will fix the problem, then I'll add that button. Just wondering if there is another setting I can change.
    The question settings are:

    Yes, I had to do something, so I changed the number of attempts to unlimited. That did fix the problem. Guess if we aren't scoring the items, we need them guess as many times as they like. This automatically resets the question for reentry from anyplace.
    Thanks.

  • Bug in adding Question slides?

    Firstly, thank to those who replied to my previous rant... restarting solved that problem.
    Current rant: I think there's a bug in the Adding Question slides... but maybe it's me.
    Here's the scenario:
    I have a Master slide that says "MCQ, T/F, FIB, Sequence" so I think it's the master for the T/F slide.
    When I go to Question Slide…, and add 1 T/F slide, it produces a new slide with the correct look from the Master slide.
    BUT if I to to Question Slide… and add 2 or more T/F slides, the slides it produces look pretty much like the Master slide (and it says the name of the master slide in the Properties panel), but it's got things wrong with it... the Question X of Y is in the wrong place (the opposite corner, actually), and the "Correct/Incorrect/You must answer" boxes are one below the other... totally different than what's on the Master slide.
    I also have issues with the GIFT import... Tryiing to import 10 T/F questions, I swear that the file is UTF-8 perfect, but it's telling me it's the wrong syntax. Why is this so hard?
    Thank you for the assistance.
    Ben

    Thanks for the good suggestion Tony. Luckily I only do a limited number of these and they involve maybe five graphics at a time. I reckon the time it would take to import, apply the motion then export from Motion into FCP would be uneconomic.
    I have done more tests and it definately only happens in DV timelines when copying scale motion keyframes from one image to another.
    One solution is to manually copy the keyframes which is admittedly a little tedious. The other is to lower the motion filtering to fast which, as far as I can tell doesn't affect the quality to a noticeable extent.
    I would say it's a bug unless anyone else can tell me where I'm going wrong?

  • Possible to add a hyperlink on a T/F question slide?

    Greetings,
    I'm delivering a Captivate 5.0 course in Adobe Connect Pro which is recording completion on the last slide through a True/False question slide (a one-question "Quiz").
    However, I want to add a hyperlink to the Correct Caption that appears after the user submits the answer. (I'd also like the Captivate course to close upon clicking the hyperlink, but I'll settle for just the hyperlink actually going somewhere.)
    I see that the hotspot, button, & slidelet tools are disabled on this question slide.
    I've looked for widgets or some way to run javascript, but I haven't found anything.
    What am I missing? How can I add a hyperlink to a question slide?
    Thanks in advance,
    Cheryl

    Hi Cheryl
    Normally adding a Hyperlink is simple. You insert a Click Box and link it to the URL. But as you likely have discovered, you cannot insert a Click Box on a Question slide.
    So what options do you have?
    Well, you could visit Lilybiri's blog and learn how to build your own Question slide using basic tools and Advanced actions in Captivate. At that point the slide is just like any other and you may then insert the Click Box object and link to the URL.
    Or you could create a single slide Captivate project that is sized really small and contains nothing but a Click Box that carries out the action of linking to the URL. Then publish that as a SWF. You would then be able to insert the SWF into the Question slide. I'm not sure how well that will actually work in action, but I've done it before without issue. Like anything, your own mileage will probably vary.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Published Captivate 6 project freezes on slide immediately before the first question slide

    I am running both CP6 and CP7 on Windows 7.
    I am still working on projects created with Captivate 6 in Captivate 6.  However, since installing CP7, any projects that I edit and publish with CP6 freeze up on the slide just before the first question slide.
    Since I have only begun experiencing this issue since CP7 was installed, I am assuming that it is something to do with the fact that i have both versions (6 and 7) installed.
    The only solution I have found so far is to open and publish the project in CP7, but this is not ideal as the projects I am working on in CP6 are new versions of ones already published in SAP LSO and I am concerned that publishing new versions of my courses from a different CP version will cause issues in LSO.
    Any ideas why this might be happening?  Ideally, I would prefer to continue to use CP6 for existing projects and only use 7 for new projects.

    Hi there,
    Have you created those projects in CP 6 from Scratch?
    Can you check the complete version of CP 6 (Help > about Adobe Captivate), it should be 6.0.1.240 or 6.1.0.319.
    Can you test with a blank new project in CP 6 after running it as Administrator (Right Click on CP 6 icon, then select run as admin).
    Thanks.

Maybe you are looking for