Question slide pulling information from different project

Hi all,
Not sure if this has happened to anyone before but I started a new project, imported a PPT deck and then started adding question slides. Except that my question slide has a caption from a previous project somehow embedded into it. I can't click on it, I can't delete it. It's even pulling the style of the 'Incomplete Caption'. I don't know how it could possibly be linked to the other project.
Anyone have any ideas?
Thanks!

Okay here's what I've found: If I start a new project -> 'From PowerPoint' and I add question slides to the project, the error occurs across the board.
If I start the new project -> 'Blank Project' and 'insert' the exact same PPT deck and THEN add the question slides the error doesn't occur.
Not sure how or why that makes a difference, but for now I'm just happy to get back to work!!
Thanks Manoj for checking this out

Similar Messages

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I pull information from a master table to another table?

This may be quite simple, but I'm missing something. I want to pull information from my master table into a secondary table. In the Master Table in Column A, I have a list of teams ("Team 1" through "Team 12"), then in Columns B through D I have information for each assignment given to each team. I want to have a secondary table for each team that lists all of their assignments. So, this is what I want: if Column A says 'Team 1', then I want the secondary table to have the info from Columns B through D.
Again, I'm sure it's simple, but I just can't figure it out.
Thanks for any help.
Mark

Hi Mark,
1) But does this work if in the Master Table (which will be over 300 rows long) each team will show up 10-15 times over the course of the 300 rows randomly (hence the need to have sub-tables for each team...so it's easier for them to see what their tasks are).
Your fellow Numbers enthusiasts in this forum will need more information to help you with that. You are on the right track though with the idea of many tables. Therein lies the power of Numbers.
2) I'm a bit confused by the formula. With the "$A2" do I select the first column in the Master Table? And can you break down the second part of the formula? The "$A$2:$D$4,2,0" Why would you have A2 and D4 in the same formula? They are not in the same row. And what's the 2,0 at the end?
Breaking this question down:
With the "$A2" do I select the first column in the Master Table?
No. The $ keeps the reference to Column A absolute (it won't change to B then C as you Fill Right in the Team Task Table.
And can you break down the second part of the formula? The "$A$2:$D$4,2,0" Why would you have A2 and D4 in the same formula? They are not in the same row.
$A$2:$D$4 is the range of cells (a rectangle) where VLOOKUP will search (in my example) but not in your 300 row table!
And what's the 2,0 at the end?
The syntax of VLOOKUP is VLOOKUP(search-for, columns-range, return-column, close-match)
The 2,0 at the end means "return column" is 2 (the second column of the range) and 0 means "Exact Match" - it won't find a close match. After Fill Right you will need to edit the formula in each Column to change "return column" to 3, then 4, then ...
With a table selected, click on the Function Button in the Toolbar and choose Function Browser. I find that much more useful than the Help Menu. However (there is always a however in life) the Help Menu will show Numbers User Guide, and Formulas and Functions Help. Download them and read at your leisure. The first four chapters of the User Guide are well worth a read. Use other chapters as a reference when you need them.
Regards,
Ian.

How do I view multiple images from different projects at the same time?

Hello
I've been trying to find the answer in the user manual, but no luck so far.
I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
Thank you
Elizabeth

Thank you again Tony
I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
Elizabeth

Portal's ability to pull information from foreign data stores?

Besides gateways, what are other alternatives to allow Portal to pull
information from foreign data stores?

Outside of gateways, the main way is to write a web provider/portlet that directly access the data in the store and formats the result into portlet html.

Pulling information from .sparse

I was wondering if anyone could provide me with instructions or has knowledge of how to pull specific information from a full- time machine to Time Capsule backup. I have access to a backup that was finished six months ago and there are e-mails existing within the mail program that I would like to retrieve. However, I do not wish to replace any of the current programs, files that I have on my new hard drive. Is there a way for me to just recover the mail?
Thank you in advance for your time and knowledge.

Certainly -- that's what Time Machine is all about!
See #15 in the Frequently Asked Questions *User Tip,* also at the top of this forum. There is special handling for Apple Mail, if that's what you were using. If you were using some other mail app, you'll need to know where to find it's data file(s).
If these aren't your current backups, you may need to manually mount the sparse bundle (by opening the Time Capsule via the Finder and double-clicking it), and the +*Browse ...+* option to access them. See #17 in the FAQ Tip.

Oracle B2B 11g question about pulling data from remote TP sftp server

Hi,
We would like replace our custom b2b solution with oracle b2b, but without resulting much changes in remote TP side. To do that the following issues are to be resolved.
1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it.
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type.

1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it. I am not sure what do you mean by AS1 1.1 but yes, SFTP is supported in Oracle B2B and if you want to poll a SFTP location, then you need to create a listening channel in Oracle B2B. For creating a listening channel, please refer -
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/bb_listen_chan.htm#BAJJICJJ
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?Yes, it is possible. There is a setting "Preserve Filename" in transport protocol parameter of a SFTP channel which should be enabled for this purpose.
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type. In case of FTP/FILE/SFTP, file name can be used to pass document type and revision information to Oracle B2B. Please refer "Filename format" setting on the above mentioned link.
I figured it out from another thread about how to pull the file. I configured the listening channel so that it reads from a remote server using sftpo protocol. And I have given the filename format as %FROM_PARTY%.dat. I am putting a file like TESTBC.dat. TESTBC is the name of the remote TP. B2B is reading the file but, recognizes the document tupe, but says that FromTP null. What is the solution?
Make sure that TP name is same as what you are giving in filename (cross-check for spelling). You may also try with default naming convention (do not mention anything in Filename format in listening channel configuration) - %FROM_PARTY%_%TIMESTAMP%.dat
for eg -
Acme_12345.dat
Regards,
Anuj

Pull Information from the Web

Is there a way to set up a LiveCycle form, so that it will pull information directly from a web-based ordering system?
Our salesmen have to enter information into the on-line ordering system and then fill out the contractual documents. I would like to get it set up, so that the form will pull the customer information off of the ordering system, instead of the salesman having to re-enter the information. Is this possible? If so, what do I need to do to accomplish it?

Since the user is using an online ordering system, I expect that the info is saved to a database.
You will have three options to get the data from the database.
1) Create a DSN and link the form directly to the OLEDB database using the DSN.
2) Bind a schema to the form and generate the data from the DB in the form of XML and then render the PDF with the XML data. You ned to have workbench server software for this.
3) Develop a webservice to retrieve the data and in your form, create a dataconnection using the webservice to get the data.
For the options 1) and 3) above, you need to have the reader extensions server software to communicate with the database/ webservice.
Hope this give some ideas to you..
Thanks
Srini

Nesting Application Modules from different Projects(solved).

I am wondering if there is a possibility of nesting application modules that are part of different projects?
thanks, Florin
Message was edited by:
florinmarcus

I've fond myself the answer to this question.
It is explained in the documentation:
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components

Managing stock footage from different projects

We're trying to figure out how to manage our stock footage. What we want to do is take stock clips out of a finished project, move them into a project that contains only stock footage, and then delete the project they originated in. That way we have all our stock footage in a single project that we can call up whenever we need to use it. Of course, we can do this manually by selecting the clips, copying them into our Stock project capture scratch and then re-connecting, but this is hugely time consuming. Any suggestions on a faster way to do this? We've thought about using Media Manager, but it seems that would only work the first time we created the Stock project. After that, with stock from other projects, it seems like we'd have to import and re-connect from whatever file Media Manger puts the clips into.

Whoops. Didn't realize that. New forums got me all confused. Thx Tom.

Question for get information from https site with socket.

I had tried to send a HTTP request with socket like :
POST http://xxx.xxx..xxx/bbs/bbsadd.php?blockid=119&title=Hello&content=Hello&clid=101&Ok=OK&s_no=0&mood=1 HTTP/1.0\r\n\r\n"
Just like this way , I could get some information or submit any message to http site like that .
But that was not success to get some information for visited https ( like Yahoo ) use the same way .
I had read some document about the https protocl I knew that had to need SSL for validate .
But what should I do as a socket program ?
package sailing;
import java.net.*;
import javax.net.ssl.*;
import java.io.*;
public class ReceiveMail
     //private Socket toYahoo;
     private SSLSocket toYahoo;
     private SSLSocketFactory factory;
     private BufferedReader read;
     private DataOutputStream write;
     private String login;
     public ReceiveMail(String userName,String userPassword)
          try
                    //this.toYahoo=new Socket("202.43.216.165",80);
                    this.factory=(SSLSocketFactory)SSLSocketFactory.getDefault();
                    this.toYahoo=(SSLSocket)this.factory.createSocket("202.43.216.165",443);
                    //this.login="POST https://edit.bjs.yahoo.com/config/login?.src=ym&login="+userName+"&passwd="+userPassword+" HTTP/1.0\r\n\r\n";
                    this.login="POST https://edit.bjs.yahoo.com/config/login?.src=ym&login="+userName+"&passwd="+userPassword+" HTTP/1.0\r\n\r\n";
                    byte[] makeBytes=this.login.getBytes();
                    this.write=new DataOutputStream(this.toYahoo.getOutputStream());
                    this.write.write(makeBytes,0,makeBytes.length);
                    this.write.flush();
                    this.read=new BufferedReader(new InputStreamReader(this.toYahoo.getInputStream()));
                    String readRes="";
                    String webFileCode="";
                    while((readRes=this.read.readLine())!=null)
                         webFileCode+=readRes;
                    System.out.println(webFileCode);
          catch(IOException e)
               System.out.println(e);
     public static void main(String args[])
          new ReceiveMail("sailing","sailing");
}================================
If this program perform successful , I think it will print code that login Yahoo Mail success .
But I just could get an error code .................
Why?

Hi,
According to your post, my understanding is that you wanted to get information from multiple lists once a user was selected.
There is no out of the box way to accomplish this with SharePoint.
As a workaround, I recommend to create a list to store the user names. Then you can create relationships between lists using the browser UI. Once you select the user name in the parent list, the associated items will be displayed in the child lists.
Here are two great articles for you to take a look at:
http://office.microsoft.com/en-in/sharepoint-server-help/create-list-relationships-by-using-unique-and-lookup-columns-HA101729901.aspx#_Toc270607416
http://msdn.microsoft.com/en-us/library/ff394632.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Manage Modifications in process from different Projects

I am working 2 different Projects in my studio: Project A and Project B.
Both Projects have "n" processes assigned, but they have the same "Process x" being shared/called.
If I need to modify the "Process x", for example in Project A, how to guarantee that the modification will be made in the "Project B"?
There is a workaround?
Thank you!

I am working 2 different Projects in my studio: Project A and Project B.
Both Projects have "n" processes assigned, but they have the same "Process x" being shared/called.
If I need to modify the "Process x", for example in Project A, how to guarantee that the modification will be made in the "Project B"?
There is a workaround?
Thank you!

Newbie: how to pull data from different data bases to a central location

Hello,
I have no experience at all in Oracle; just in MySQL, PostgreSQL, Firebird for simple applications. I have this project where my Client wants to extract data from related 5 tables, from 12 databases in different locations. Table structure in all 12 locations are the same, and I need to consolidate information for reporting purposes. I was planning in developing a Delphi application for this purpose, yet maybe with pure Oracle SQL or Oracle tools can I automate this?
Thank you

Please clarify your term "database".Instance of an Oracle database, one in each of the 12 locations.
Are the computers in all these locations available via Internet?My client can see all 12 databases from an Oracle database manager; I still have to investigate if its through Internet or private WAN.
What RDBMS are all these data sources?I have yet to verify the precise Oracle version, yet I know its an old one: 7 or 9. Will confirm it.
What flavor of RDBMS is the target data repository?Same as previous question
Is this a 1 shot data load or an ongoing requirement to consolidate "new" data into repository?The require to pull data automatically, maybe a batch process done by night.

Pulling information from an email and pasting it into the Subject line

i have email requests coming in from project managers that are automatically created after they fill out a form.
Outlook is set up with a rule on their machines to forward the request to my art dept.
Problem is that the emails always have the name of the form as the subject line.
the email generates project info within the body. Is there a way to set up a rule that will pull the info i want from the body of the email and amend the subject line with it?
Nick

I would like to use the
"PROJECT NAME
CUSTOMER REFERENCE OR SITE NAME"
(along with the information that would should have come after it)
to become the subject line.
I read from your previous post though that scripts should run after rules, so i would need to combine
the rule i am already using into the script correct?
I am a graphic designer, working on storefronts and fascias, i only dabble with outlook so thank you
for your time.

Ajax Dynamic Conntent -- pull report from different page

Hi All,
I am reposting my question, the previous thread was hacked by Fifi :-) . I am trying to implement Denes's solution in this Pulling Dynamic Conntent . Somehow I am getting java script error "unknown runtime error". on page load itself. It is giving error at the code html_GetElement('ReportDrop').innerHTML = gReturn;
I believe I am missing some of the referenced java script files.
Any help please ?
I have kept my application on Apex.oracle.come
workspace : edw_apex
manish/manish
Thanks
Manish

Finally I figured out the page template was missing, which was causing the issue. Just overwrote the body and footer of the template from this Make a copy of exiting page template and replace the body part with the code below:
<htmldb:SUCCESS_MESSAGE><div id="SUCCESS_MESSAGE">#SUCCESS_MESSAGE#</div></htmldb:SUCCESS_MESSAGE>
<htmldb:NOTIFICATION_MESSAGE><div id="NOTIFICATION_MESSAGE">#NOTIFICATION_MESSAGE#</div></htmldb:NOTIFICATION_MESSAGE>
<htmldb:GLOBAL_NOTIFICATION><div id="GLOBAL_NOTIFICATION">#GLOBAL_NOTIFICATION#</div></htmldb:GLOBAL_NOTIFICATION>
<htmldb:REGION_POSITION_01><div id="REGION_POSITION_01">#REGION_POSITION_01#</div></htmldb:REGION_POSITION_01>
<htmldb:REGION_POSITION_02><div id="REGION_POSITION_02">#REGION_POSITION_02#</div></htmldb:REGION_POSITION_02>
<htmldb:REGION_POSITION_03><div id="REGION_POSITION_03">#REGION_POSITION_03#</div></htmldb:REGION_POSITION_03>
<htmldb:REGION_POSITION_04><div id="REGION_POSITION_04">#REGION_POSITION_04#</div></htmldb:REGION_POSITION_04>
<htmldb:REGION_POSITION_05><div id="REGION_POSITION_05">#REGION_POSITION_05#</div></htmldb:REGION_POSITION_05>
<htmldb:REGION_POSITION_06><div id="REGION_POSITION_06">#REGION_POSITION_06#</div></htmldb:REGION_POSITION_06>
<htmldb:REGION_POSITION_08><div id="REGION_POSITION_08">#REGION_POSITION_08#</div></htmldb:REGION_POSITION_08>
<htmldb:BOX_BODY><div id="BOX_BODY">#BOX_BODY#</div></htmldb:BOX_BODY>
Replace the footer part with the code
#FORM_CLOSE#</body></html>Thanks again !!
--Manish

Question slide pulling information from different project

Similar Messages

Maybe you are looking for