Question to create a calculation to add three table's cells for a grand total

I need help with creating a calculation to add three tables. Table, 6, 7 and 8. The total of all tables should be in the last table where it says Total.
I would appreciate any help.
Thanks

If this is the resultyou are looking for the attached will help.
Steve
Please post LiveCycle Designer ES questions in that forum in the future.

Similar Messages

Question regarding adding sums in 3 tables for a grand total

Can someone please help me with this. I have the coding in the tables to add table 6, 7, and 8 but each time I add or delete a row the coding gets messed up. It is adding in some places but not on each row. I don't know the coding to use to avoid this problem everytime you add or delete a row. I just need all tables to add up for a grand total.

If this is the resultyou are looking for the attached will help.
Steve
Please post LiveCycle Designer ES questions in that forum in the future.

Question regarding calculating a formula to add three tables of numbers

I need help with a form that I would like to show the Total of numbers from Table 6, 7 and 8. I have put in codes for the Subtotals but the final total I can't seem to figure out. Can someone help me with the coding to add subtotal 1, 2 and 3.
Thanks

Thanks for a quick response but I noticed also that some of my cells in the table were not numeric so I changed it. The Subtotal is not working. I am getting an error. Your formula was working but it did not include the last total of numbers. It should include tables 6, 7 and 8 totals. Can you look at it again. Thanks again!!

How to add new tables in Streams for Schema level replication ( 10.2.0.3 )

Hi,
I am in process of setting up Oracle Streams schema level replication on version 10.2.0.3. I am able to setup replication for one table properly. Now I want to add 10 more new tables for schema level replication. Few questions regarding this
1. If I create new tables in source, shall I have to create tables in target database manually or I have to do export STREAMS_INSTANTIATION=Y
2. Can you tell me metalink note id to read more on this topic ?
thanks & regards
parag

The same capture and apply process can be used to replicate other tables. Following steps should suffice your need:
Say table NEW is the new table to be added with owner SANTU
downstr_cap is the capture process which is already running
downstr_apply is the apply process which is already there
1. Now stop the apply process
2. Stop the capture process
3. Add the new table in the capture process using +ve rule
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES
table_name      => 'SANTU.NEW',
streams_type    => 'capture',
streams_name    => 'downstr_cap',
queue_name      => 'strmadmin.DOWNSTREAM_Q',
include_dml     => true,
include_ddl     => true,
source_database => ' Name of the source database ',
inclusion_rule => true
END;
4. Take export of the new table with "OBJECT_CONSISTENT=Y" option
5. Import the table at destination with "STREAMS_INSTANTIATION=Y' option
6. Start the apply process
7. Start the capture process

Rectifications of different sizes for all the three table lines in footer.

Hi friendz,
                i am working in ecc6 system(smartforms).
                i am using 3 table lines in the footer one for total, the second one for tax calculation, and the third one for the grand total.
But in the output screen display - the total, tax and grand total(in different table lines) are displayed with different heights, which gives unprofessional look for the form.
i want all the table lines in the footer to display with equal heights.

Hi,
first you create LTYPE follow below sequence
Go table tab--> details tab--->give suitable heights for ltype
next go to FOOTER in the main window
create three table lines under footer like
FOOTER1
FOOTER2
FOOTER3
for three table lines we need to assign line type LTYPE
Go FOOTER1 ---> output options -
> give LTYPE.
     FOOTER2 ---> output options -
> give LTYPE.
     FOOTER3 ---> output options -
> give LTYPE.
reward points if helpful.
Regards,
Bhupal.
Edited by: bhupal reddy on Jul 22, 2008 11:55 AM

Problem with UITableViewCell, can´t add the same custom cell

Hi,
I have a table view which I populate the cells with a UITableView class that i wrote. This custom class has two labels and a image view. In the method cellForRowAtIndexPath, i use the following code:
[cell addSubview:myTableViewCellClass];
the first cell is ok, the cell displays my custom cell. But the second cell can´t display the same custom cell object. Is there something I can do to avoid this problem?
I have another problem. When i scroll my table view very fast, the program crashes with the following message:
[Session started at 2008-08-24 18:30:10 -0700.]
Loading program into debugger…
GNU gdb 6.3.50-20050815 (Apple version gdb-960) (Sun May 18 18:38:33 UTC 2008)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols >for
"/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
warning: Unable to read symbols for "/System/Library/Frameworks>/CoreGraphics.framework/CoreGraphics" (file not
found).
warning: Unable to read symbols from "CoreGraphics" (not yet mapped into memory).
Program loaded.
sharedlibrary apply-load-rules all
Attaching to program: `/Users/pitteri/Library/Application Support/iPhone
Simulator/User/Applications/9F7BD517-CB1E-49C5-BD30-24831239120F/OndeEstou.app/O ndeEstou', process 11209.

This is not the correct method for using custom table cells with a table. You need to create a custom cell class that extends UITableViewCell. This class should handle the layout and display for the content of a single cell.
In your table view delegate's 'cellForRowAtIndexPath' method, you create or obtain an instance of your custom cell, configure the cell by setting the title or other properties appropriate for you custom cell, then return the cell. That's it.
It appears, from your code, that you are trying to add the table view cell class to the cell. Maybe you mistyped. But don't call 'addSubview' on anything within the table view delegate.
Have a look at the UICatalog example app. It has several custom table cells and shows both how to implement a custom cell, but also how to use it in a table.
Enjoy.

Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing. Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
- use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
- create three submenus and use the speeches as menu music. Here's a (random) video on creating submenus:
http://www.youtube.com/watch?v=DlhQSb_D5kc
John

I'm using firefox version 6 and for the last three days the add-ons manager page won't load. my question is why won't the add-ons page load? is the server down on your end?

i'm using firefox version 6 and for the last three days the add-ons manager page won't load. my question is why won't the add-ons page load? is the server down on your end?

Click on something below the Get Add-ons menu item on the left side of the Add-ons Manager tab.

Creating a calculator

i am trying to create a calculator and I am not sure how to set up the multiply, divide, add, subtract or the equal keys. i am currently trying " inputField.getText" to get the number , but how do i then get the second number from the same field after pressing one of the functions and set that up so that the equal key will give me the answer???? Any help would be appreciated
public void actionPerformed(ActionEvent event);
                    if(event.getSource() == sevenButton)
                         seven();
                    if else(event.getSource() == eightButton)
                         eight();
                    if else(event.getSource() == nineButton)
                         nine();
                    if else (event.getSource() == divideButton)
                         divide();
                    if else(event.getSource() == fourButton)
                         four();
                    if else(event.getSource () == fiveButton)
                         five();
                    if else(event.getSource () == sixButton)
                         six();
                    if else (event.getSource () == multiplyButton)
                         multiply();
                    if else (event.getSource () == oneButton)
                         one();
                    if else(event.getSource () == twoButton)
                         two();
                    if else (event.getSource () == threeButton)
                         three ();
                    if else(event.getSource () == minusButton)
                         minus();
                    if else(event.getSource () == zeroButton)
                         zero();
                    if else(event.getSource () == equalsButton)
                         equals();
                    if else(event.getSource () == addButton)
                         add();
               {     //end actionperformed
               public void seven()
                    inputField.setText(" ");
                    inputField.setText("7");
               public void eight()
                    inputField.setText(" ");
                    inputField.setText("8");
               public void nine()
                    inputField.setText(" ");
                    inputField.setText("9")'
               public void divide()
                    num1 = Integer.parseInt(inputField.getText());
          }     //end class

Seems to me that a real calculator stores the number from the display somewhere when (e.g.) the Plus key is pressed, then when the Equals key is pressed it adds that stored number to the current display and displays the result. Why don't you imitate that behaviour?

Security create-keychain does not add the keychain to search list

Hello guys,
It seems that since OS X Mavericks the security create-keychain does not add the keychain in the search list. I tried calling the SecKeychainCreate directly to verify that this is not a bug in the SecurityTool (the result is the same). Could you please help me verify if this is expected behavior or more like a bug that was not reported?
Is there other way to create a keychain and add it to the search list except modifying the whole search list (for ex. using the security list-keychain)? I would like to concurrently create more than one keychain and modifying the whole search list does not seem like a good practice, becuase it introduces a race condition.
P.S. I tested this in Yosemite and the behavior is the same.
Regards,
Ilian Iliev

Hi Carla,
Sorry to ask such a basic question, but are talking about Oracle Sales Analyzer?
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Creating a form to Add List Item and to a Document Library

Hi, I'm super new to sharepoint , and have what is probably a newbie question.
I have a list and a document library. The documents are linked to the items in the list. (1 list item may have one or moe documents associated with it).
I need to create a form to add new list items that will at the same time upload documents to the document library.
Do I use infopath for that?
Thanks

Hi,
According to your description, when adding a new item to the current list, you might want to upload the attachments of this item to other Document Library as well.
As a workaround, you can create an Event Receiver to capture the event when there is “An item was added”. In the Event Receiver, we can write C# code to copy the attachments
from a list item to a Document Library.
About how to create a simple Event Receiver in SharePoint 2013:
https://msdn.microsoft.com/en-us/library/ff398052.aspx
Here is the related code I use in this scenario, you can use it as a reference:
using System;
using System.Security.Permissions;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Utilities;
using Microsoft.SharePoint.Workflow;
namespace SharePointProject13.EventReceiver1
/// <summary>
/// List Item Events
/// </summary>
public class EventReceiver1 : SPItemEventReceiver
/// <summary>
/// An item is being updated.
/// </summary>
public override void ItemUpdating(SPItemEventProperties properties)
//base.ItemUpdating(properties);
/// <summary>
/// An item was added.
/// </summary>
public override void ItemAdded(SPItemEventProperties properties)
// base.ItemAdded(properties);
using (SPSite site = new SPSite("http://sp/"))
SPList docDestination = site.RootWeb.Lists["Document"];
SPList lstAttachment = site.RootWeb.Lists["List1"];
SPFolder fldRoot = site.RootWeb.Folders[docDestination.Title];
SPFileCollection flColl = null;
if (properties.ListItem.Attachments != null && properties.ListItem.Attachments.Count > 0)
foreach (String strName in properties.ListItem.Attachments)
flColl = fldRoot.Files;
SPListItem listtem = docDestination.Items.Add();
SPFile FileCopy = properties.ListItem.ParentList.ParentWeb.GetFile(properties.ListItem.Attachments.UrlPrefix + strName);
string destFile = flColl.Folder.Url + "/" + FileCopy.Name;
byte[] fileData = FileCopy.OpenBinary();
SPFile flAdded = flColl.Add(destFile, fileData, site.RootWeb.CurrentUser, site.RootWeb.CurrentUser, Convert.ToDateTime(properties.ListItem[SPBuiltInFieldId.Created]), Convert.ToDateTime(properties.ListItem[SPBuiltInFieldId.Modified]));
SPListItem item = flAdded.Item;
item[SPBuiltInFieldId.Created] = Convert.ToDateTime(properties.ListItem[SPBuiltInFieldId.Created]);
item[SPBuiltInFieldId.Modified] = Convert.ToDateTime(properties.ListItem[SPBuiltInFieldId.Modified]);
flAdded.Item.Update();
How it works in my environment:
Add an item with attachment in List1:
In the Document Library, we can see the uploaded attachment there:
Best regards
Patrick Liang
TechNet Community Support

Has anyone created a dynamic two or three level tree?

Hi -
If anyone has created a dynamic two or three level tree, can you please explain and/or show a code example of how you did it? The 'dynamic tree tutorial' doesn't show the child node being created dynamically, but graphically.
I can build the first level fine, but how does the child node get associated with the parent node in the next level?
Thanks in advance.

Here's a snippet that might help. I'm sure there are more elegant ways to code it but this seems to work!
Good luck,
Keith
//1st Loop - executed once per first level of tree
for (int i = 0; i <= days; i++) {
j = i+1;
TreeNode newFirstNode = new TreeNode();
newFirstNode.setId("day" + j);
newFirstNode.setText("First " + j );
itineraryNodeChildren.add(newFirstNode);
java.util.List firstNodeChildren = newFirstNode.getChildren();
// Second Loop executed once per Second level within the First loop
for (int k=0; k<rk; k++) {
secondNumber ++;
TreeNode newSecondNode = new TreeNode();
newSecondNode.setText(secondNodeText);
firstNodeChildren.add(newSecondNode);
}

Problem when creating a calculated column "Item has already been added"

Hi,
I built an a set of lists and custom content types which are made available under http://moss/callcenter. When I want to create a new calculated column for one of my custom content types i get the following error
Item has already been added. Key in
dictionary: 'Strasse_Strasse' Key being added: 'Straße_Straße'
This is rather strange as I don't even get as far as creating that new column. The error occurs right when I select the type calculated column, even before I enter a name for the new column. How ever, when I want to create a calculated column in root site collection (http://moss/) this error does not occur and I can create the new column.
Any ideas anyone?
Thank you,
Christoph

hi,
you can try below thing
http://blogs.msdn.com/b/timquin/archive/2009/02/11/sharepoint-item-has-already-been-added-key-in-dictionary-484-key-being-added-484.aspx
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

How to write the expression when create the calculated column?

Dear,
I want to create some calculated column in my attribute view, but I don't know how to write the code in the expression, is there any introduction about this part, how to use those function and how about the grammar in this expression code ? or is there any example about this calculated column?
Thanks for your sincerely answer.

Hi Zongjie,
you can find some information about the creation of calculated columns in the HANA Modeling Guide (http://help.sap.com/hana/SAP_HANA_Modeling_Guide_for_SAP_HANA_Studio_en.pdf).
Within chapter 6.2.1 (Create Analytic Views) you can see under point 7 some basics and also a simple example. The same is also valid for Calculation Views.
Chapter 8.9 (Using Functions in Expressions) describes the different available functions.
You also can use the integrated search in the HANA Studio by clicking the "?" button in the button left corner. Then you get some links in the side panel with related information.
In general you can write your expression manually or you can just drag and drop the functions, elements, operators into the editor window. For example if you drag and drop the "if" function into the editor window you get "if(intarg,arg2,arg3)" inserted. The arguments can be replaced manually or also by drag and drop.
It is also worse to use the "Validate Syntax" button on top of the editor window. It gives you directly a feedback if your expression syntax is correct. If not you get some helpful information about the problem (ok, sometimes it is a little bit confusing because of the cryptic error message format ).
Best Regards,
Florian

How to create a control and add it to a page layput

I am reading the following link :-
http://www.itidea.nl/index.php/what-about-you-must-fill-out-all-required-properties-before-completing-this-action-when-publishing-a-page/
which says that i need to create a control and add it to a page layout. but can anyone help me in understanding how i can create a user control and add them to page layout ?
Thanks

> First problem i could not find a User Control (Farm Solution only) under the Office/SharePoint section
if you mean New item in Visual Studio, then check it under general Web category. User controls are basic ASP.Net functionalities, not Sharepoint-specific. If it is not there, you may use the following trick:
1. Create new project in other VS instance using "ASP.Net Empty Web Application" template
2. Add new user control there (in this project type it should exist for sure under Web category. Called "Web User Control")
3. Copy all user control's files to the folder of your Sharepoint project (ascx, ascx.cs, ascx.designer.cs)
4. In VS instance with Sharepoint project add existing items: all copied user control files. They should be grouped under ascx file automatically after that
> The type or namespace name 'TaxonomyFieldControl' could not be found (are you missing a using directive or an assembly reference?)"
you need to add reference to Microsoft.SharePoint.Taxonomy.dll assembly, which is located in the GAC (assume that you have installed Sharepoint on your dev env)
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com
thanks a lot for your help. so can i do the following steps:-
I follow these steps to deploy a user control.
using Visual Studio 2012 , i added a new Farm solution.
then inside the farm solution i added a new User Control(Farm Solution Only).
3. inside the user control i entered the following code:-
using Microsoft.SharePoint;
using Microsoft.SharePoint.Taxonomy;
using Microsoft.SharePoint.WebControls;
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
namespace WikiPopUp.ControlTemplates.WikiPopUp
[ToolboxData("<{0}:CustomValidationRequiredFieldsOnPage runat=server></{0}:CustomValidationRequiredFieldsOnPage>")]
public class CustomValidationRequiredFieldsOnPage : WebControl
protected override void CreateChildControls()
base.CreateChildControls();
if (SPContext.Current.FormContext.FormMode == SPControlMode.Edit)
bool arethere = AreThereAnyMissingRequiredFieldsOnPage();
if (arethere)
//SPPageStateControl:
//Provides an ASP.NET control that handles the Ribbon buttons controlling the state of a Microsoft SharePoint Server wiki or publishing page,
//such as the CheckInCheckOutButton or the PublishingButton.
SPPageStateControl baseParentStateControl = Page.Items[typeof(SPPageStateControl)] as SPPageStateControl;
//Publish button: SPListItem MissingRequiredFields checks this.FieldHasValue(link.Name, field);
//the field is empty (which is right) when the page is first created (MMD field is never filled in)
//when the field was once filled, saved and emptied the field in sp code still has the previous value and the check MissingRequiredFields succeeds
//after succeeding this check the page is validated (this.Page.Validate()) and this one fails which results SP validating the page as the Save button does
if (baseParentStateControl.HasError)
//this overwrites the previous PageErrorState
//and validates the page
//no popup anymore and status updates in yellow area
baseParentStateControl.EnsureItemSavedIfEditMode(false);
else
//there are missing fields at this listitem, but they're not on the page
//do nothing here, because the SerializedErrorState contains the navigate url to the Edit Properties page
//and a message pops up
/// <summary>
/// Check if required fields are missing which are present at the page
/// </summary>
/// <returns></returns>
private static bool AreThereAnyMissingRequiredFieldsOnPage()
foreach (Control control in SPContext.Current.FormContext.FieldControlCollection)
//get the control type
string type = control.GetType().Name;
FieldTypes controlType = (FieldTypes)Enum.Parse(typeof(FieldTypes), type);
switch (controlType)
case FieldTypes.TaxonomyFieldControl:
TaxonomyFieldControl tfc = control as TaxonomyFieldControl;
if (!tfc.IsValid)
return true;
break;
default:
break;
return false;
enum FieldTypes
DateTimeField, FieldValue, TextField, RichImageField, NoteField, RichHtmlField, PublishingScheduleFieldControl, TaxonomyFieldControl, BooleanField, ComputedField
4. i add a reference for the Sharepoint.taxnomy
5. then i deploy the solution to my site collection. and now i can see the new solution inside the farm solution under central administration.
but not sure if these are all the required steps to register the user control or still i need to do extra steps ?

Question to create a calculation to add three table's cells for a grand total

Similar Messages

Maybe you are looking for