Question to Datasource transport

I repulicate one datasource from R/3 to Production BI system using 3.5 version. However I used this datasource as 7.0 version, also created transformation based on the datasource in BI development system. Quesiton is if I transport request from BI development to BI production system, does this datasource with 3.5 verison will be changed automatically to 7.0 version? Are there any risk on it. Thanks!

Once u migrated Datasource to 7.0 in Dev, after transport it will appear as 7.0 datasource.. No need to migrate there in Production...
in prod system, after replication datasource will have the inactive status..
Now U have to transport same datasource from BI DEV to BI PRD... And this will overwrite the replicated inactive datasource

Similar Messages

Question about Datasource (transport / activate)

Let you know this subject is already fixed.. so regard it.
Edited by: Glenn Quinn on Mar 13, 2008 4:14 PM

I made a mistake on my end, and I thought it is fixed but it isn't.
What I am trying to transport Datasource to QA. It did went successfully but somehow it didn't activate on the QA. It is showing modified in QA. I am trying to make it active version. I did tried to replicated but no success on it. Any idea on how to make it work or what step I need to do?
Edited by: Glenn Quinn on Mar 13, 2008 4:38 PM

Question on Transformations transport

Had two questions:
1. When you transport transformations from source to target, are the tech ids newly created? We noticed that for the ones that are between a DSO to a cube, the tech names dont change, but for ones from R/3 to DSO, the tech names change. A new modified and active version of the transformation is created. This can be verified in RSTRAN table.
Question is do you find this behaviour too and has it resulted in any problems?
2. Theres an additional coloumn, saying BI 7.0 in the 'conversion of logical systems' section. If you select tools and conversion of logical system names (in RSA1), you will find this additional coloumn. Has anyone checked this box? And if so, how has it impacted your transports. We wanted to check this box and run the transports, but we ran into config/authorization issues.
Would appreciate if you find something to share on this. I will check on SDN too. We are on SP 11.
Regards
Prakash

1.Question is do you find this behaviour too and has it resulted in any problems?
yes we observed this behaviour too, but never had any problems.
2.Has anyone checked this box? And if so, how has it impacted your transports.
No we dont have that setting up. So not sure how it would impact the transports. But the 7.0 check box is only relevant for 7.0 datasources, DTP and Transformations. So I think any other object that doesnt fall into this category should cause a problem.
Message was edited by:
voodi

BI Content Remote Activation of Datasource - Transports

During the process of installing BI content in the Dev BW Environment, I am promted to login to the source system (CRM DEV in this case) so that the BI content datasources can be activated and replicated remotely. This process works fine.
The question I have is the following.
When I tranpsort all the BW BI content objects from our DEV BW environment to the BW QA environemt, do I still need to collect the activated datasources in the source system (CRM DEV ) and also transport them to CRM QA ?
Or does the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically when i transport the BW BI content objects from DEV BW to BW QA.
Thanks

I don't think, the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically BW QA.
In BI 7.0, the general practice is, first u have transport datasources from ECC Dev to ECC QA...Then replicate these datasources in BI QA.
In most of the cases, these replicated datasources becomes inactive in BI QA.
To over come this, after the replication, u should transport Datasources from BI DEV to QA, so that this DS overwrites replicated (inactive) ones from ECC.
Re: DataSource getting inactive after transport

Datasource transport in BI 7.0 in SCM 5.0 fails

System Specification - SCM 5.0 with BI 7.0 SP10.
Is there a way to transport a new datasource created from a planning area from Dev -> QA. Right now I have tried many times to transport datasources and all of them have failed. In the past we had to either open the system or use a User with SAP_ALL and manually activate these datasources and then transport the remaining objects DTP's, TRNFMs etc.
Any other way to activate datasources, other then manual method.
Thanks,

Hi Satish,
You want to transport transformations. This transformation can be between datasrc and the infocube or any such 2 objects.
The target system where you want to transport this should have these 2 objects. They must be active in the target system.
If not then the request which you will transport should also have these 2 activated objects along with the transformation.
hope it helps...

DataSource Transport to another system

HI,
I have transported the DataSource from Development system to Quality system. The datasource is showing under the source system of Development system in Quality system. How can I change this Datasource to source system Quality system.
thanks and regards
Murugesan

HI,
Have you checked the source system assignment and conversion of logical systems names after the transport?
RSA1 --> Menu bar -->Tools -->conversion of logical systems names
Enter the original source system (Dev) and Target source system (QA) save it...
Regards
KP

DataSource-Transport in R/3 does not work

Hello everybody,
we're currently having some trouble with transporting DataSources in the SAP R/3 out of the transactions RSA6 (for standard DataSources) or RSO2 (for generic DataSources).
system environment:
We're using three R/3-Systems (deployment, integration and production) and two BI-Systems (deployment/integration as one and production) with the folowing connections:
BI-production <- R/3-production
BI-deployment/integration <- R/3-integration
nothing <- R/3-deployment
This problem only occurs in the R/3-deployment-system.
problem:
Usually a transport request pops up if you edit a DataSource. In our case nothing happens. We can transport the ExtractStructure without any problems. But the DataSource itself cannot be transportet. So we have to do every single change in the R/3-integration-system again. This is leading to the issue that the two elements of a DataSource (the ExtractStructure and the DS itself) have two different original-systems.
Thanks for your help and kind regards
Sebastian.

Maybe its helpful to say that the key-problem is that the system doesn't create an a-version (object type OSOA) of the DataSource.
If you activate a content-DS in RSA5 you normally add an a-version of the DS to the already existing d-version (object type OSOD) of that DS. And if you create a generic DS you normally also create an a-version of that DS.
In our case that doesn't happen. And that's the reason why we cannot transport the DS.
But - as I sad - this problem only occurs in our development-system.

DataSources transport from development to QA TESTING???

Hi Gurus,
I developed some objects in my D system using a generic extractions. I used 3 DataSources .
Ii transported all my SAP BW object in the testing system. now I need to collect my 3 DataSource in the R/3 development System to the R/3 system. Please can anyone show me the steps. I tried all day but no result. Please help me, I need the steps.
Thank You Gurus.

Hi
You are using Tbales, so collect Table if it is Z/Y table, if it is SAP table then not required.
1.Collect Tables and DataSources in request and transport from D ECC to Q ECC.
2.Replicate DS in Q BW system.
3.Collect InfoObjects and Transport from D BW to Q BW.
4.Collect Cube/DSO and Transport from D BW to Q BW.
5.Collect Multiproviders if you have any and Transport from D BW to Q BW.
6.Collect Transfer/InfoSource and Transport from D BW to Q BW.
7.Collect Update Rules and Transport from D BW to Q BW.
8.Collect Reports and Transport from D BW to Q BW.
Thanks
Reddy

Urgent : CO/PA Datasource Transport from R/3 DEV to R/3 QA

Hello!
I am trying to transport the CO/PA datasources that show up in RSA6 in R/3DEV to R/3 QA. All the transports have been moved. Nothing shows up in RSA6 of QA. I can display the datasource in KEB0 but cannot do the extraction in RSA3, as it gives the error 'It is not defined in the system".
I have already executed the program ZCOPACLT and that is how I can display the datasource in KEB0.
Am I missing something somewhere?
Any suggestions are welcome.
Kind of urgent. Appreciate your time.

Hi Sonal,
1) check in DEV if the extractstructure was generated there.
2) check the object list of the transport to see wether the extractstructure was included.
if the structure was not generated in DEV you might have to recreate the Datasource, unless anybody knows a better way.
if the structure is inactive (e.g because Description is missing) try to activate the structure and recollect the transport.
If the structure is available in Dev and active annd was not in transport you should recollect and retransport.
Sorry, thats all I can think of right now.
Michael

Question about bw transport (3)

Hello Gurus,
    will you please answer my following questions:
      (1) can I transport everything in the AWB transport connection ? is there
            any exception?
      (2) what is Standard Transport System (automatic transport connection) ?
      (3) what does object collector mean ?
      (4) when should we apply "object changeability" function in AWB transport
           connect ?
Many thanks,
Frank Zhang

Hi.....
1) can I transport everything in the AWB transport connection ? is there
any exception?
Yes.........In the AWB transport connection u can transport all the BW objects.............U can go here through RSA1 ..........or u can also use the tcode : RSOR.......Here u can select Object types from the left side window..........In the right side click on the select objects..............then collect manuaaly all the objects which u want to transfer............
2) what is Standard Transport System (automatic transport connection) ?
Check this..........
http://help.sap.com/saphelp_nw04/helpdata/en/94/d4943b00ce6622e10000000a114084/frameset.htm
3) what does object collector mean ?
Using object collectors, you can create a set of objects. For example:
·        By loading the objects from files
·        From object lists of programs such as Where-Used List, Coverage Analyzer, or Runtime Analysis
4) when should we apply "object changeability" function in AWB transport
connect ?
Sometimes it is useful...........and also required to make changes in Production Box........... mainly in day to day operations......... such as Activating Objects , fixing data loads,Changing Starting time of a process chain,new quiries to be created.........
Check this........
http://help.sap.com/saphelp_nw04s/helpdata/en/0e/a7343e8c7f6329e10000000a114084/frameset.htm
Regards,
Debjani......

Datasource transport

Hi
I want to include the datasource in the Transport Request.
how do i achieve the same
plz guide
Regards

Goto
SE03 and then Include Objects in a Transport Request , then remove Maximum Number of Hits = 1.000 and give 9999, then give Person Responsible i.e. SAP Id and then execute it will display all Packages, you identify your Object and then select it and click on In request Button, it will ask Package name and Req, so create it.
Thanks
Reddy

DataSource Transport error

Hello Gurus...
We are getting an issue while transporting the Ds's from D to Q system.
error msg is " Object requested is currently Locked by user DDIC"
Could anyone help me to voercome this.
regards,
Ala.

Well do the following:
rather than uncloking the request, unlock the object from all request. For this, go to SE03 again --> give RSDS as type and <datasource name> --> select the check box and execute. This should surely remove your DS object from all request.
Regards
Pankaj

RSDS 197 error in datasource transport

Hi Guys,
I am transporting a datasource and i am receiving next message:
rsds197- Field name use two underscores reserved for navigational attributes.
However, the transport was done, i saw the changes, but when I try re-transport the message remain.
Have this some other impact in the datasource?
Thanks in advance,
Regards,
Jeysi

Hi,
Have you tried to replicate DataSource (on RSA1, right button over data source and choose replicate data source)?
If does not work you can try to activate InfoSource using program RS_TRANSTRU_ACTIVATE_ALL (on SE38 run this program, fill the available fields and run).
I hope it helps!
Kind Regards,

Datasources transport

Hi
i am transporting datasource from dev to quality. i have to manually replicate the ds in quality, rite.
what about infopackages from dev to quality. do i need to create infopackages in quality or do i need to transport from dev to qa
Regards

Hi Sanju,
Regarding Replication of DS...........
For R3 DS
1)Create DS in R3 and Replicate in BW-Dev
2)Transport it R3 Qualty
3)Replicate in Bw-Quality
if it is LO datasource rthe Procdedure is Slightly Diff............
1)Goto LBWE or SMQ1 and clear the Queues
2)Clear Delta Queues in RSA7 and
3)then Transport the DS to Qualty.
4)Check whether the DS is iin active version in Quuality
For FlatFIle DS
1)Transport it to BW-Dev to BW -Quality and Activate.--No dependecy of R3.
Creation of Infopaks ........As a Standard Procedure ,Create in Dev and Transport from Dev to Quality or Production.
Else u can create the INfopaks in Quality and Prodcution too.
Rgds
SVU123
Edited by: svu123 on Nov 12, 2009 7:25 AM

A question on DataSource for Master Data example 0plant,0customer etc...,

I can get the field names of a standard data source for master data (say for example 0plant_attr) using table ROOSFIELD .
Now i want to know from which tables these fields are coming from.
How to get the table name for a each field in standard data source for master data .
For transaction data, transaction LBWE is there,similarly is there something like this for master data.
Another Question:
How to see communication structure for standard data source for master data ?

Hi,
the entire documentation for standard things in bi is avaialable in business content of net weavers in help.sap.com..... please refer this for any standard thing the entire documentation will be available.....
this is one of the thread for 0customer attr datasource and the various fields and the tables of origin check accorignly for what ever u want.......
http://help.sap.com/saphelp_nw70/helpdata/EN/41/6a6da460196936e10000000a114b54/frameset.htm
Regards
vamsi
Edited by: vamsi talluri on Jan 30, 2009 5:40 AM

Question to Datasource transport

Similar Messages

Maybe you are looking for