Question to DB_16K_CACHE_SIZE

Hi,
DB: Oracle 10g
OS: Linux
due to the fact having a lot of FTS (full table scanns) on our system, trying to create tablespaces with larger block size with:
ALTER SYSTEM SET DB_16K_CACHE_SIZE=16M SCOPE=BOTH;
My question is how to define the best value for DB_16K_CACHE_SIZE?
Are 16MB ok?
Thanks

Oracle supports multiple block sizes now, but in separate tablespaces. So the only way you can use a 16 KB block size, in addition to another default block size, is to create another tablespace specifying a 16 KB block size. Have you done this?
Only data blocks that are 16 KB in size will be cached in the 16 KB cache. It will not cache 2 * 8 KB blocks in there, or 4 * 4 KB blocks, or any other combination.
To then use this new tablespace you have to create tables and indexes in it. In your case this means moving and recreating these tables and indexes into the new tablespace, from their current tablespace. Which means you need to decide what tables and indexes to move. And you need twice the disk space for them, because you need the current tablespace space plus the same space in the new tablespace. So you have the extra disk space available for this?
And the time to rebuild everything while moving it? And the downtime, because you don't really want to be updating tables while you move them?
And finally, the cache size has no effect on full table scans, under default conditions. So unless you know something I don't, then this exercise is all a waste of time. When Oracle does a full table scan, the buffers it uses to read in data blocks are placed back at the head of the free list for immediate reuse, and not at the end of the list. Which means that Oracle will always reuse the same few buffers during a full table scan. This is to deliberately not flood the cache during a full table scan, and throw out more frequently accessed data and indexes.
You can disable this via a couple of ways. The main way is to tell Oracle to CACHE the table. But then your cache needs to be bigger than the table, which I doubt is less than 16 MB in size. If it was a full table scan would not be an issue.
The real issue with full table scans is your disk I/O rate and throughput, and not the amount of memory you have.
John

Similar Messages

Please answer these questions.....Urgent

Q You are using Data Guard to ensure high availability. The directory structures on the primary and the standby hosts are different.
Referring to the scenario above, what initialization parameter do you set up during configuration of the standby database?
db_convert_dir_name
db_convert_file_name
db_dir_name_convert
db_directory_convert
db_file_name_convert
Oracle 9i Administration, Question 1 of 12
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
The RDBMS cannot detect this. It must use regular export and import with compress=y to remove chained and migrated rows as part of the regular database.
The UTLCHAIN utility
The DBMS_REPAIR package
The ANALYZE command with the LIST CHAINED ROWS option
The DBMS_MIG_CHAIN built-in package
Q While doing an export, the following is encountered:
ORA-1628 ... max # extents ... reached for rollback segment ..
Referring to the scenario above, what do you do differently so that the export is resumed even after getting the space allocation error?
Use the RESUMABLE=Y option for the export.
Run the export with the AUTO_ROLLBACK_EXTEND=Y option.
Increase the rollback segment extents before running the export.
Use THE RESUME=Y option for the export.
Monitor the rollback segment usage while the export is running and increase it if it appears to be running out of space.
Q
The DBCA (Database Configuration Assistant) prompts the installer to enter the password for which default users?
SYS and SYSTEM
OSDBA and INTERNAL
SYSOPER and INTERNAL
SYS and INTERNAL
SYSTEM and SYSDBA
Q You are designing the physical database for an application that stores dates and times. This will be accessed by users from all over the world in different time zones. Each user needs to see the time in his or her time zone.
Referring to the scenario above, what Oracle data type do you use to facilitate this requirement?
DATE
TIMESTAMP WITH TIME ZONE
TIMESTAMP
DATETIME
TIMESTAMP WITH LOCAL TIME ZONE
Q Which one of the following conditions prevents you from redefining a table online?
The table has a composite primary key.
The table is partitioned by range.
The table's organization is index-organized.
The table has materialized views defined on it.
The table contains columns of data type LOB.
Q An Oracle database administrator is upgrading from Oracle 8.1.7 to Oracle 9i.
Referring to the scenario above, which one of the following scripts does the Oracle database administrator run after verifying all steps in the upgrade checklist?
u8.1.7.sql
u81700.sql
u0900020.sql
u0801070.sql
u0817000.sql
Q What command do you use to drop a temporary tablespace and the associated OS files?
ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP;
ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP CASCADE;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP INCLUDING CONTEN
Q You wish to use a graphical interface to manage database locks and to identify blocking locks.
Referring to the scenario above, what DBA product does Oracle offer that provides this functionality?
Oracle Expert, a tool in the Oracle Enterprise Manager product
Lock Manager, a tool in the base Oracle Enterprise Manager (OEM) product, as well as the console
Lock Manager, a tool in Oracle Enterprise Manager's Tuning Pack
The console of Oracle Enterprise Manager
Viewing the Lock Manager charts of the Oracle Performance Manager, a tool in the Diagnostics Pack add on
Q CREATE DATABASE abc
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXDATAFILES 20
MAXLOGHISTORY 100
Referring to the code segment above, how do you change the MAX parameters shown?
They can be changed using an ALTER SYSTEM command, but the database must be in the NOMOUNT state.
The MAX parameters cannot be changed without exporting the entire database, re-creating it, and importing.
They can be changed using an ALTER SYSTEM command while the database is open.
They can be changed in the init.ora file, but the database must be restarted for the values to take effect.
They cannot be changed unless you re-create your control file
Q You need to change the archivelog mode of an Oracle database.
Referring to the scenario above, what steps do you take before actually changing the archivelog mode?
Execute the archive log list command
Start up the instance and mount the database but do not open it.
Start up the instance and mount and open the database in restricted mode.
Kill all user sessions to ensure that there is no database activity that might trigger redolog activity.
Take all tablespaces offline
Q You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
A high-speed network is available where the data transmission effect is negligible.
The application can be tuned to account for the delays.
The requests to the database return small amounts of data as in an OLTP system.
The data coming back from the server are fragmented into several packets.
A large number of users are logged on concurrently to the system.
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
Choice 1 The statistics are static and must be updated by running the analyze command to include the most recent activity.
Choice 2 The statistics are only valid as a point in time snapshot of activity.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Choice 4 The statistics do not include administrative users.
Choice 5 The statistics gathered are based on individual sessions, so you must interpret them based on the activity and application in which the user was involved at the time you pull the statistics.
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
Choice 1 The statistics are static and must be updated by running the analyze command to include the most recent activity.
Choice 2 The statistics are only valid as a point in time snapshot of activity.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Choice 4 The statistics do not include administrative users.
Choice 5 The statistics gathered are based on individual sessions, so you must interpret them based on the activity and application in which the user was involved at the time you pull the statistics.
Q You want to shut down the database, but you do not want client connections to lose any non-committed work. You also do not want to wait for every open session to disconnect.
Referring to the scenario above, what method do you use to shut down the database?
Choice 1 Shutdown abort
Choice 2 Shutdown immediate
Choice 3 Shutdown transactional
Choice 4 Shutdown restricted sessions
Choice 5 Shutdown normal
Q What step or steps do you take to enable Automatic Undo Management (AUM)?
Choice 1 Create the UNDO tablespace, then ALTER SYSTEM SET AUTO_UNDO.
Choice 2 Use ALTER SYSTEM SET AUTO_UNDO; parameter.
Choice 3 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, stop/start the database.
Choice 4 Add UNDO_AUTO to parameter to init.ora, stop/start the database, and create the UNDO tablespace.
Choice 5 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, create the UNDO tablespace, stop/start the database
AUTOMATIC UNDO PARAMETER SETTINGS.
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
Choice 1 Dynamic SGA
Choice 2 Advanced Replication
Choice 3 Data Guard
Choice 4 Oracle Managed Files
Choice 5 External Tables
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
Choice 1 Dynamic SGA
Choice 2 Advanced Replication
Choice 3 Data Guard
Choice 4 Oracle Managed Files
Choice 5 External Tables
Q What package is used to specify audit requirements for a given table?
Choice 1 DBMS_TRACE
Choice 2 DBMS_FGA
Choice 3 DBMS_AUDIT
Choice 4 DBMS_POLICY
Choice 5 DBMS_OBJECT_AUDIT
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
Choice 1 The ANALYZE command with the LIST CHAINED ROWS option
Choice 2 The RDBMS cannot detect this. It must use regular export and import with compress=y to remove chained and migrated rows as part of the regular database.
Choice 3 The DBMS_MIG_CHAIN built-in package
Choice 4 The DBMS_REPAIR package
Choice 5 The UTLCHAIN utility
Q What are the three functions of an undo segment?
Choice 1 Rolling back archived redo logs, database recovery, recording user trace information
Choice 2 The rollback segment has only one purpose, and that is to roll back transactions that are aborted.
Choice 3 Rolling back uncommitted transactions, maintaining read consistency, logging processed SQL statements
Choice 4 Rolling back transactions, maintaining read consistency, database recovery
Choice 5 Rolling back transactions, recording Data Manipulation Language (DML) statements processed against the database, recording Data Definition Language (DDL) statements processed against the database
Q Which one of the following describes locally managed tablespaces?
Choice 1 Tablespaces within a Recovery Manager (RMAN) repository
Choice 2 Tablespaces that are located on the primary server in a distributed database
Choice 3 Tablespaces that use bitmaps within their datafiles, rather than data dictionaries, to manage their extents
Choice 4 Tablespaces that are managed via object tables stored in the system tablespace
Choice 5 External tablespaces that are managed locally within an administrative repository serving an Oracle distributed database or Oracle Parallel Server
Q The schema in a database you are administering has a very complex and non-user friendly table and column naming system. You need a simplified schema interface to query and on which to report.
Which one of the following mechanisms do you use to meet the requirement stated in the above scenario?
Choice 1 Synonym
Choice 2 Stored procedure
Choice 3 Labels
Choice 4 Trigger
Choice 5
View
Q You need to change the archivelog mode of an Oracle database.
Referring to the scenario above, what steps do you take before actually changing the archivelog mode?
Choice 1 Start up the instance and mount the database but do not open it.
Choice 2 Execute the archive log list command
Choice 3 Kill all user sessions to ensure that there is no database activity that might trigger redolog activity.
Choice 4 Take all tablespaces offline.
Choice 5 Start up the instance and mount and open the database in restricted mode.
Q The Oracle Internet Directory debug log needs to be changed to show the following events information.
Given the Debug Event Types and their numeric values:
Starting and stopping of different threads. Process related. - 4
Detail level. Shows the spawned commands and the command-line arguments passed - 32
Operations being performed by configuration reader thread. Configuration refresh events. - 64
Actual configuration reading operations - 128
Operations being performed by scheduler thread in response to configuration refresh events, and so on - 256
What statement turns debug on for all of the above event types?
Choice 1 oidctl server=odisrv debug=4 debug=32 debug=64 debug=128 debug=256 start
Choice 2 oidctl server=odisrv debug="4,32,64,128,256" start
Choice 3 oidctl server=odisrv flags="debug=4 debug=32 debug=64 debug=128 debug=256" start
Choice 4 oidctl server=odisrv flags="debug=484" start
Choice 5 oidctl server=odisrv flags="debug=4,32,64,128,256" start
Q Which Data Guard mode has the lowest performance impact on the primary database?
Choice 1 Instant protection mode
Choice 2 Guaranteed protection mode
Choice 3 Rapid protection mode
Choice 4 Logfile protection mode
Choice 5 Delayed protection mode
Q In a DSS environment, the SALES data is kept for a rolling window of the past two years.
Referring to the scenario above, what type of partitioning do you use for this data?
Choice 1 Hash Partitioning
Choice 2 Range Partitioning
Choice 3 Equipartitioning
Choice 4 List Partitioning
Choice 5 Composite Partitioning
Q What are the three main areas of the SGA?
Choice 1 Log buffer, shared pool, database writer
Choice 2 Database buffer cache, shared pool, log buffer
Choice 3 Shared pool, SQL area, redo log buffer
Choice 4 Log writer, archive log, database buffer
Choice 5
Database buffer cache, log writer, shared pool
Q When performing full table scans, what happens to the blocks that are read into buffers?
Choice 1 They are put on the MRU end of the buffer list by default.
Choice 2 They are put on the MRU end of the buffer list if the NOCACHE clause was used while altering or creating the table.
Choice 3 They are read into the first free entry in the buffer list.
Choice 4 They are put on the LRU end of the buffer list if the CACHE clause was used while altering or creating the table.
Choice 5 They are put on the LRU end of the buffer list by default
Q Standard security policy is to force users to change their passwords the first time they log in to the Oracle database.
Referring to the scenario above, how do you enforce this policy?
Choice 1 Use the FORCE PASSWORD EXPIRE clause when the users are first created in the database.
Choice 2 Ask the users to follow the standards and trust them to do so.
Choice 3 Periodically compare the users' passwords with their initial password and generate a report of the users violating the standard.
Choice 4 Use the PASSWORD EXPIRE clause when the users are first created in the database.
Choice 5 Check the users' passwords after they first log in to see if they have changed it. If not, remind them to do so.
Q What object privilege is necessary for a foreign key constraint to be created and enforced on the referenced table?
Choice 1 References
Choice 2 Alter
Choice 3 Update
Choice 4 Resource
Choice 5 Select
Q What command do you use to drop a temporary tablespace and the associated OS files?
Choice 1 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP INCLUDING CONTENTS
Choice 2 ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
Choice 3 ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP;
Choice 4 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP;
Choice 5 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP CASCADE;
Q You need to implement a failover strategy using TAF. You do not have enough resources to ensure that your backup Oracle instance will be up and running in parallel with the primary.
Referring to the scenario above, what failover mode do you use?
Choice 1 FAILOVER_MODE=manual
Choice 2 FAILOVER_MODE=none
Choice 3 FAILOVER_MODE=auto
Choice 4 FAILOVER_MODE=basic
Choice 5 FAILOVER_MODE=preconnect
Q An Oracle database used for an OLTP application is encountering the "snapshot too old" error.
Referring to the scenario above, which database object or objects do you query in order to set the OPTIMAL parameter for the rollback segments?
Choice 1 V$ROLLNAME and V$ROLLSTAT
Choice 2 V$ROLLNAME
Choice 3 V$ROLLSTAT
Choice 4 DBA_ROLL and DBA_ROLLSTAT
Choice 5 DBA_ROLLBACK_SEG
QWhat are five background processes that must always be running in a functioning Oracle Instance?
Choice 1 SMON (system monitor), PMON (process monitor), RECO (recoverer process), ARCH (archive process), CKPT (checkpoint process)
Choice 2 DBW0 (database writer), SMON (system monitor), PMON (process monitor), LGWR (log writer), CKPT (checkpoint process)
Choice 3 DBW0 (database writer), SMON (system monitor), PMON (process monitor), D000 (Dispatcher process), CKPT (checkpoint process)
Choice 4 DBW0 (database writer), CKPT (checkpoint process), RECO (recoverer process), LGWR (log writer), ARCH (archive process)
Choice 5 DBW0 (database writer), LGWR (log writer), ARCH (archive process), CKPT (checkpoint process), RECO (recoverer process)
You have two large tables with thousands of rows. To select rows from the table_1, which are not referenced by an indexed common column (e.g. col_1) in table_2, you issue the following statement:
select * from table_1
where col_1 NOT in (select col_1 from table_2);
This statement is taking a very long time to return its result set.
Referring to the scenario above, which equivalent statement returns much faster?
Choice 1
select * from table_1
where not exists (select * from table_2)
Choice 2
select * from table_2
where col_1 not in (select col_1 from table_1)
Choice 3
select * from table_1
where col_1 in (select col_1 from table_2 where col_1 = table_1.col_1)
Choice 4
select * from table_1
where not exists (select 'x' from table_2 where col_1 = table_1.col_1)
Choice 5
select table_1.* from table_1, table_2
where table_1.col_1 = table_2.col_1 (+)
Performance is poor during peak transaction periods on a database you administer. You would like to view some statistics on areas such as LGWR (log writer) waits.
Referring to the scenario above, what performance view do you query to access these statistics?
Choice 1
DBA_CATALOG
Choice 2
V$SESS_IO
Choice 3
V$SYSSTAT
Choice 4
V$PQ_SYSSTAT
Choice 5
V$SQLAREA
You need to assess the performance of your shared pool at instance startup, but you cannot restart the database.
Referring to the scenario above, how do you empty your SGA?
Choice 1
Execute $ORACLE_HOME/bin/db_shpool_flush
Choice 2
ALTER SYSTEM FLUSH SHARED_POOL
Choice 3
ALTER SYSTEM CLEAR SHARED POOL
Choice 4
DELETE FROM SYS.V$SQLAREA
Choice 5
DELETE FROM SYS.V$SQLTEXT
You are reading the explain plan of a problem query and notice that full table scans are used with a HASH join.
Referring to the scenario above, in what instance is a HASH join beneficial?
Choice 1
When joining two small tables--neither having any primary keys or unique indexes
Choice 2
When no indexes are present
Choice 3
When using the parallel query option
Choice 4
When joining two tables where one table may be significantly larger than the other
Choice 5
Only when using the rule-based optimizer
An Oracle database administrator is upgrading from Oracle 8.1.7 to Oracle 9i.
Referring to the scenario above, which one of the following scripts does the Oracle database administrator run after verifying all steps in the upgrade checklist?
Choice 1
u0817000.sql
Choice 2
u0900020.sql
Choice 3
u8.1.7.sql
Choice 4
u81700.sql
Choice 5
u0801070.sql
You have a large On-Line Transaction Processing (OLTP) database running in archive log mode with two redo log groups that have two members each.
Referring to the above scenario, to avoid stalling during peak activity periods, which one of the following actions do you take?
Choice 1
Add a third member to each of the groups.
Choice 2
Increase your LOG_CHECKPOINT_INTERVAL setting.
Choice 3
Turn off archive logging.
Choice 4
Add a third redo log group.
Choice 5
Turn off redo log multiplexing
What object does a database administrator create to store precompiled summary data?
Choice 1
Replicated Table
Choice 2
Archive Log
Choice 3
Temporary Tablespace
Choice 4
Cached Table
Choice 5
Materialized View
Which one of the following statements do you execute in order to find the current default temporary tablespace?
Choice 1
SELECT property_name, property_value FROM v$database_properties
Choice 2
show parameter curr_default_temp_tablespace
Choice 3
SELECT property_name, property_value FROM all_database_properties
Choice 4
SELECT property_name, property_value FROM database_properties
Choice 5
SELECT property_name, property_value FROM dba_database_properties
In which one of the following situations do you use a bitmap index?
Choice 1
With column values that are guaranteed to be unique
Choice 2
With column values having a high cardinality
Choice 3
With column values having a consistently uniform distribution
Choice 4
With column values having a low cardinality
Choice 5
With column values having a non-uniform distribution
A table has more than two million rows and, if exported, will exceed 4 GB in size with data, indexes, and constraints. The UNIX you are using has a 2 GB limit on file sizes. This table needs to be backed up using Oracle EXPORT.
There are two ways this table can be exported and split into multiple files. One way is to use the UNIX pipe, split, and compress commands in conjunction with the Oracle EXPORT utility to generate multiple equally-sized files.
Referring to the scenario above, what is the other way that you can export and split into multiple files?
Choice 1
Export the data into one file and the index into another file.
Choice 2
Use a WHERE clause with the export to limit the number of rows returned.
Choice 3
Vertically partition the table into sizes of less than 2 GB and then export each partition as a separate file.
Choice 4
Specify the multiple files in the FILE parameter and specify the FILESIZE in the EXPORT parameter file.
Choice 5
Horizontally partition the table into sizes of less than 2 GB and then export each partition as a separate file.
Which one of the following statements describes the PASSWORD_GRACE_TIME profile setting?
Choice 1
It specifies the grace period, in days, for changing the password once expired.
Choice 2
It specifies the grace period, in days, for changing the password from the time it is initially set and the time the account is made active.
Choice 3
It specifies the grace period, in minutes, for changing the password once expired.
Choice 4
It specifies the grace period, in days, for changing the password after the first successful login after the password has expired.
Choice 5
It specifies the grace period, in hours, for changing the password once expired.
In OEM, what color and icon are associated with a warning?
Choice 1
Yellow hexagon
Choice 2
Yellow flag
Choice 3
Red flag
Choice 4
Gray flag
Choice 5
Red hexagon
What parameter in the SQLNET.ORA file specifies the order of the naming methods to be used?
Choice 1
NAMES.SEARCH_ORDER
Choice 2
NAMES.DOMAIN_HINTS
Choice 3
NAMES.DIRECTORY_PATH
Choice 4
NAMES.DOMAINS
Choice 5
NAMES.DIRECTORY
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TABLESPACE
Choice 2
UNDO_TIMELIMIT
Choice 3
UNDO_MANAGEMENT
Choice 4
UNDO_FLASHBACKTO
Choice 5
UNDO_RETENTION
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TABLESPACE
Choice 2
UNDO_TIMELIMIT
Choice 3
UNDO_MANAGEMENT
Choice 4
UNDO_FLASHBACKTO
Choice 5
UNDO_RETENTION
DB_BLOCK_SIZE=8192
DB_CACHE_SIZE=128M
DB_2K_CACHE_SIZE=64M
DB_4K_CACHE_SIZE=32M
DB_8K_CACHE_SIZE=16M
DB_16K_CACHE_SIZE=8M
Referring to the initialization parameter settings above, what is the size of the cache of standard block size buffers?
Choice 1
8 M
Choice 2
16 M
Choice 3
32 M
Choice 4
64 M
Choice 5
128 M
DB_CREATE_FILE_DEST='/u01/oradata/app01'
DB_CREATE_ONLINE_LOG_DEST_1='/u02/oradata/app01'
Referring to the sample code above, which one of the following statements is NOT correct?
Choice 1
Data files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
Choice 2
Control files created with no location specified are created in the DB_CREATE_ONLINE_LOG_DEST_1 directory.
Choice 3
Redolog files created with no location specified are created in the DB_CREATE_ONLINE_LOG_DEST_1 directory.
Choice 4
Control files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
Choice 5
Temp files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
LogMiner GUI is a part of which one of the following?
Choice 1
Oracle Enterprise Manager
Choice 2
Oracle LogMiner Plug-In
Choice 3
Oracle Diagnostics Pack
Choice 4
Oracle Performance Tuning Pack
Choice 5
Oracle LogMiner StandAlone GUI
The schema in a database you are administering has a very complex and non-user friendly table and column naming system. You need a simplified schema interface to query and on which to report.
Which one of the following mechanisms do you use to meet the requirement stated in the above scenario?
Choice 1
View
Choice 2
Trigger
Choice 3
Stored procedure
Choice 4
Synonym
Choice 5
Labels
alter index gl.GL_JE_LINES_N1 rebuild
You determine that an index has too many extents and want to rebuild it to avoid fragmentation performance degradation.
When you issue the above scenario, where is the rebuilt index stored?
Choice 1
In the default tablespace for the login name you are using
Choice 2
You cannot rebuild an index. You must drop the existing index and re-create it using the create index statement.
Choice 3
In the system tablespace
Choice 4
In the same tablespace as it is currently stored
Choice 5
In the index tablespace respective to the data table on which the index is built
Which one of the following describes locally managed tablespaces?
Choice 1
Tablespaces within a Recovery Manager (RMAN) repository
Choice 2
External tablespaces that are managed locally within an administrative repository serving an Oracle distributed database or Oracle Parallel Server
Choice 3
Tablespaces that are located on the primary server in a distributed database
Choice 4
Tablespaces that use bitmaps within their datafiles, rather than data dictionaries, to manage their extents
Choice 5
Tablespaces that are managed via object tables stored in the system tablespace
Which method of database backup supports true incremental backups?
Choice 1
Export
Choice 2
Operating System backups
Choice 3
Oracle Enterprise Backup Utility
Choice 4
Incremental backups are not supported. You must use full or cumulative backups.
Choice 5
Recovery Manager
You are using Data Guard to ensure high availability. The directory structures on the primary and the standby hosts are different.
Referring to the scenario above, what initialization parameter do you set up during configuration of the standby database?
Choice 1
db_dir_name_convert
Choice 2
db_convert_dir_name
Choice 3
db_convert_file_name
Choice 4
db_directory_convert
Choice 5
db_file_name_convert
Tablespace APP_INDX is put in online backup mode when redo log 744 is current. When APP_INDX is taken out of online backup mode, redo log 757 is current.
Referring to the scenario above, if the backup is restored, what are the start and end redo logs used, in order, to perform a successful point-in-time recovery of APP_INDX?
Choice 1
Start Redo Log 744, End Redo Log 757
Choice 2
Start Redo Log 743, End Redo Log 756
Choice 3
Start Redo Log 745, End Redo Log 756
Choice 4
Start Redo Log 744, End Redo Log 756
Choice 5
Start Redo Log 743, End Redo Log 757
You want to make new data entered or changed in a table adhere to a given integrity constraint, but data exist in the table that violates the constraint.
Referring to the scenario above, what do you do?
Choice 1
Use an enabled novalidate constraint.
Choice 2
Use an enabled validate constraint.
Choice 3
Use a deferred constraint.
Choice 4
Use a disabled constraint.
Choice 5
You cannot enforce this type of constraint
In Oracle 9i, the connect internal command has been discontinued.
Referring to the text above, how do you achieve a privileged connection in Oracle 9i?
Choice 1
CONNECT <username> AS SYSOPER where username has DBA privileges.
Choice 2
CONNECT <username> as SYSDBA.
Choice 3
Connect using Enterprise Manager.
Choice 4
CONNECT sys.
Choice 5
Use CONNECT <username> as normal but include the user in the external password file.
How many partitions can a table have?
Choice 1
64
Choice 2
255
Choice 3
1,024
Choice 4
65,535
Choice 5
Unlimited
In Cache Fusion, when does a request by one process for a resource owned by another process fail?
Choice 1
When a null mode resource request is made for a resource already owned in exclusive mode by another process
Choice 2
When a shared mode resource request is made for a resource already owned in shared mode by another process
Choice 3
When a shared mode resource request is made for a resource already owned in null mode by another process
Choice 4
When an exclusive mode resource request is made for a resource already owned in null mode by another process
Choice 5
When an exclusive mode resource request is made for a resource already owned in shared mode by another process
The Oracle Internet Directory debug log needs to be changed to show the following events information.
Given the Debug Event Types and their numeric values:
Starting and stopping of different threads. Process related. - 4
Detail level. Shows the spawned commands and the command-line arguments passed - 32
Operations being performed by configuration reader thread. Configuration refresh events. - 64
Actual configuration reading operations - 128
Operations being performed by scheduler thread in response to configuration refresh events, and so on - 256
What statement turns debug on for all of the above event types?
Choice 1
oidctl server=odisrv flags="debug=4 debug=32 debug=64 debug=128 debug=256" start
Choice 2
oidctl server=odisrv debug="4,32,64,128,256" start
Choice 3
oidctl server=odisrv flags="debug=4,32,64,128,256" start
Choice 4
oidctl server=odisrv flags="debug=484" start
Choice 5
oidctl server=odisrv debug=4 debug=32 debug=64 debug=128 debug=256 start
A new OFA-compliant database is being installed using the Oracle installer. The mount point being used is /u02.
Referring to the scenario above, what is the default value for ORACLE_BASE?
Choice 1
/usr/app/oracle
Choice 2
/u02/oracle
Choice 3
/u02/app/oracle
Choice 4
/u01/app/oracle
Choice 5
/u02/oracle_base
You need to start the Connection Manager Gateway and the Connections Admin processes.
Referring to the scenario above, what command do you execute?
Choice 1
CMCTL START CM
Choice 2
CMCTL START CMADMIN
Choice 3
CMCTL START CMAN
Choice 4
CMCTL START CMGW
Choice 5
CMCTL START CMGW CMADM
When performing full table scans, what happens to the blocks that are read into buffers?
Choice 1
They are read into the first free entry in the buffer list.
Choice 2
They are put on the MRU end of the buffer list if the NOCACHE clause was used while altering or creating the table.
Choice 3
They are put on the LRU end of the buffer list if the CACHE clause was used while altering or creating the table.
Choice 4
They are put on the LRU end of the buffer list by default.
Choice 5
They are put on the MRU end of the buffer list by default.
You wish to take advantage of the Oracle datatypes, but you need to convert your existing LONG or LONG RAW columns to Character Large Object (CLOB) and Binary Large Object (BLOB) datatypes.
Referring to the scenario above, what is the quickest method to use to perform this conversion?
Choice 1
Use the to_lob function when selecting data from the existing table into a new table.
Choice 2
Use the ALTER TABLE statement and MODIFY the column to the new LOB datatype.
Choice 3
You must export the existing data to external files and then re-import them as BFILE external LOBS.
Choice 4
Create a new table with the same columns but with the LONG or LONG RAW column changed to a CLOB or BLOB type. The next step is to INSERT INTO newtable select * from oldtable.
Choice 5
LONG and LONG RAW datatypes are not compatible with LOBS and cannot be converted within the Oracle database.
You need to redefine the JOURNAL table in the stress test environment. You want to check first to see if it is possible to redefine this table online.
Referring to the scenario above, what statement do you execute that checks whether or not the JOURNAL table can be redefined online if you are connected as the table owner?
Choice 1
Execute DBMS_REDEFINITION.CHECK_TABLE_REDEF(USER,'JOURNAL');
Choice 2
Execute DBMS_REDEFINITION.VERIFY_REDEF_TABLE(USER,'JOURNAL');
Choice 3
Execute DBMS_REDEFINITION.CAN_REDEF_TABLE(USER,'JOURNAL');
Choice 4
Execute DBMS_REDEFINITION.START_REDEF_TABLE(USER,'JOURNAL');
Choice 5
Execute DBMS_REDEFINITION.SYNC_INTERIM_TABLE(USER,'JOURNAL');
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TIMELIMIT
Choice 2
UNDO_MANAGEMENT
Choice 3
UNDO_RETENTION
Choice 4
UNDO_TABLESPACE
Choice 5
UNDO_FLASHBACKTO
Which one of the following procedures is used for the extraction of the LogMiner dictionary?
Choice 1
DBMS_LOGMNR_D.EXTRACT
Choice 2
DBMS_LOGMNR.BUILD
Choice 3
DBMS_LOGMINER_D.BUILD
Choice 4
DBMS_LOGMNR_D.BUILD_DICT
Choice 5
DBMS_LOGMNR_D.BUILD
set pause on;
column sql_text format a35;
select sid, osuser, username, sql_text
from v$session a, v$sqlarea b
where a.sql_address=b.address
and a.sql_hash_value=b.hash_value
Why is the SQL*Plus sample code segment above used?
Choice 1
To view full text search queries by issuing user
Choice 2
To list all operating system users connected to the database
Choice 3
To view SQL statements issued by connected users
Choice 4
To detect deadlocks
Choice 5
To view paused database sessions
When dealing with very large tables in which the size greatly exceeds the size of the System Global Area (SGA) data block buffer cache, which one of the following operations must be avoided?
Choice 1
Group operations
Choice 2
Aggregates
Choice 3
Index range scans
Choice 4
Multi-table joins
Choice 5
Full table scans
You are reading the explain plan of a problem query and notice that full table scans are used with a HASH join.
Referring to the scenario above, in what instance is a HASH join beneficial?
Choice 1
Only when using the rule-based optimizer
Choice 2
When joining two small tables--neither having any primary keys or unique indexes
Choice 3
When no indexes are present
Choice 4
When joining two tables where one table may be significantly larger than the other
Choice 5
When using the parallel query option
Performance is poor during peak transaction periods on a database you administer. You would like to view some statistics on areas such as LGWR (log writer) waits.
Referring to the scenario above, what performance view do you query to access these statistics?
Choice 1
V$SQLAREA
Choice 2
V$SYSSTAT
Choice 3
V$SESS_IO
Choice 4
V$PQ_SYSSTAT
Choice 5
DBA_CATALOG
What security feature allows the database administrator to monitor successful and unsuccessful attempts to access data?
Choice 1
Autotrace
Choice 2
Fine-Grained Auditing
Choice 3
Password auditing
Choice 4
sql_trace
Choice 5
tkprof
You need to configure a default domain that is automatically appended to any unqualified net service name.
What Oracle-provided network configuration tool do you use to accomplish the above task?
Choice 1
Oracle Names Control Utility
Choice 2
Configuration File Utility
Choice 3
Oracle Network Configuration Assistant
Choice 4
Listener Control Utility
Choice 5
Oracle Net Manager
You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
Choice 1
The requests to the database return small amounts of data as in an OLTP system.
Choice 2
The application can be tuned to account for the delays.
Choice 3
The data coming back from the server are fragmented into several packets.
Choice 4
A large number of users are logged on concurrently to the system.
Choice 5
A high-speed network is available where the data transmission effect is negligible.
You have partitioned the table ORDER on the ORDERID column using range partitioning. You want to create a locally partitioned index on this table. You also want this index to be unique.
Referring to the scenario above, what is required for the creation of this unique locally partitioned index?
Choice 1
A unique partitioned index on a table cannot be local.
Choice 2
There can be only one unique locally partitioned index on the table.
Choice 3
The index has to be equipartitioned.
Choice 4
The table's primary key columns should be included in the index key.
Choice 5
The ORDERID column has to be part of the index's key.
You have a large On-Line Transaction Processing (OLTP) database running in archive log mode with two redo log groups that have two members each.
Referring to the above scenario, to avoid stalling during peak activity periods, which one of the following actions do you take?
Choice 1
Turn off redo log multiplexing.
Choice 2
Increase your LOG_CHECKPOINT_INTERVAL setting.
Choice 3
Add a third member to each of the groups.
Choice 4
Add a third redo log group.
Choice 5 Turn off archive logging
When transporting a tablespace, the tablespace needs to be self-contained.
Referring to the scenario above, in which one of the following is the tablespace self-contained?
Choice 1 A referential integrity constraint points to a table across a set boundary.
Choice 2 A partitioned table is partially contained in the tablespace.
Choice 3 An index inside the tablespace is for a table outside of the tablespace.
Choice 4 A corresponding index for a table is outside of the tablespace.
Choice 5 A table inside the tablespace contains a LOB column that points to LOBs outside the tablespace.
You have experienced a database failure requiring a full database restore. Downtime is extremely costly, as is any form of data loss. You run the database in archive log mode and have a full database backup from three days ago. You have a database export from last night. You are not running Oracle Parallel Server (OPS).
Referring to the above scenario, how do you minimize downtime and data loss?
Choice 1 Import the data from the export using direct-path loading.
Choice 2 Create a standby database and activate it.
Choice 3 Perform a restore of necessary files and use parallel recovery operations to speed the application of redo entries.
Choice 4 Conduct a full database restore and bring the database back online immediately. Apply redo logs during a future maintenance window.
Choice 5 Perform a restore and issue a recover database command
You have two large tables with thousands of rows. To select rows from the table_1, which are not referenced by an indexed common column (e.g. col_1) in table_2, you issue the following statement:
select * from table_1
where col_1 NOT in (select col_1 from table_2);
This statement is taking a very long time to return its result set.
Referring to the scenario above, which equivalent statement returns much faster?
Choice 1 select * from table_1
where col_1 in (select col_1 from table_2 where col_1 = table_1.col_1)
Choice 2 select * from table_2
where col_1 not in (select col_1 from table_1)
Choice 3 select * from table_1
where not exists (select 'x' from table_2 where col_1 = table_1.col_1)
Choice 4 select table_1.* from table_1, table_2
where table_1.col_1 = table_2.col_1 (+)
Choice 5 select * from table_1
Which one of the following initialization parameters is obsolete in Oracle 9i?
Choice 1 LOG_ARCHIVE_DEST
Choice 2 GC_FILES_TO_LOCKS
Choice 3 FAST_START_MTTR_TARGET
Choice 4 DB_BLOCK_BUFFERS
Choice 5 DB_BLOCK_LRU_LATCHES
You find that one of your tablespaces is running out of disk space.
Referring to the scenario above, which one of the following is NOT a valid option to increase the space available to the tablespace?
Choice 1 Move some segments to other tablespaces.
Choice 2 Resize an existing datafile in the tablespace.
Choice 3 Add another datafile to the tablespace.
Choice 4 Increase the MAX_EXTENTS for the tablespace.
Choice 5 Turn AUTOEXTEND on for one or more datafiles in the tablespace.
What tools or utilities do you use to transfer the data dictionary's structural information of transportable tablespaces?
Choice 1 DBMS_TTS
Choice 2 SQL*Loader
Choice 3 Operating System copy commands
Choice 4 DBMS_STATS
Choice 5 EXP and IMP
Which one of the following, if backed up, is potentially problematic to a complete recovery?
Choice 1
Control file
Choice 2
System Tablespace
Choice 3
Data tablespaces
Choice 4
Online Redo logs
Choice 5
All archived redologs after the last backup
Your database warehouse performs frequent full table scans. Your DB_BLOCK_SIZE is 16,384.
Referring to the scenario above, what parameter do you use to reduce disk I/O?
Choice 1 LOG_CHECKPOINT_TIMEOUT
Choice 2 DBWR_IO_SLAVES
Choice 3 DB_FILE_MULTIBLOCK_READ_COUNT
Choice 4 DB_WRITER_PROCESSES
Choice 5 DB_BLOCK_BUFFERS
Which one of the following describes the "Reset database to incarnation" command used by Recovery Manager?
Choice 1 It performs a resynchronization of online redo logs to a given archive log system change number (SCN).
Choice 2 It performs point-in-time recovery when using Recovery Manager.
Choice 3 It restores the database to the initial state in which it was found when first backing it up via Recovery Manager.
Choice 4 It restores the database to a save point as defined by the version control number or incarnation number of the database.
Choice 5 It is used to undo the effect of a resetlogs operation by restoring backups of a prior incarnation of the database.
You are using the CREATE TABLE statement to populate the data dictionary with metadata to allow access to external data, where /data is a UNIX writable directory and filename.dbf is an arbitrary name.
Referring to the scenario above, which clause must you add to your CREATE TABLE statement?
Choice 1
organization external
Choice 2 external file /data/filename.dbf
Choice 3 ON /data/filename.dbf
Choice 4 organization file
Choice 5 file /data/filename.dbf
Your business user has expressed a need to be able to revert back to data that are at most eight hours old. You decide to use Oracle 9i's FlashBack feature for this purpose.
Referring to the scenario above, what is the value of UNDO_RETENTION that supports this requirement?
Choice 1 480
Choice 2 8192
Choice 3 28800
Choice 4 43200
Choice 5 28800000
Materialized Views constitute which data warehousing feature offered by Oracle?
Choice 1 FlashBack Query
Choice 2 Summary Management
Choice 3 Dimension tables
Choice 4 ETL Enhancements
Choice 5 Updateable Multi-table Views
DB_BLOCK_SIZE=8192
DB_CACHE_SIZE=128M
DB_2K_CACHE_SIZE=64M
DB_4K_CACHE_SIZE=32M
DB_8K_CACHE_SIZE=16M
DB_16K_CACHE_SIZE=8M
Referring to the initialization parameter settings above, what is the size of the cache of standard block size buffers?
Choice 1 8 M
Choice 2 16 M
Choice 3 32 M
Choice 4 64 M
Choice 5 128 M
You need to send listener log information to the Oracle Support Services. The listener name is LSNRORA1.
Referring to the scenario above, which one of the following statements do you use in the listener.ora file to generate this log information?
Choice 1 TRACE_LEVEL_LSNRORA1=debug
Choice 2 TRACE_LEVEL_LSNRORA1=admin
Choice 3 TRACE_LEVEL_LSNRORA1=5
Choice 4 TRACE_LEVEL_LSNRORA1=support
Choice 5 TRACE_LEVEL_LSNRORA1=on
Which one of the following statements causes you to choose the NOARCHIVELOG mode for an Oracle database?
Choice 1
The database does not need to be available at all times.
Choice 2
The database is used for a DSS application, and updates are applied to it once in 48 hours.
Choice 3
The database needs to be available at all times.
Choice 4
It is unacceptable to lose any data if a disk failure damages some of the files that constitute the database.
Choice 5
There will be times when you will need to recover to a point-in-time that is not current.
You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
Choice 1 A large number of users are logged on concurrently to the system.
Choice 2 A high-speed network is available where the data transmission effect is negligible.
Choice 3 The data coming back from the server are fragmented into several packets.
Choice 4 The application can be tuned to account for the delays.
Choice 5 The requests to the database return small amounts of data as in an OLTP system.

Post a few if you need answers to a few.
Anyway, my best shot:-
Q. Directories are different
A. Use db_file_name_convert why? read about it.
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
A.The ANALYZE command with the LIST CHAINED ROWS option
Q While doing an export, the following is encountered:
my best guess
Use the RESUMABLE=Y option for the export.
Q. The DBCA (Database Configuration Assistant) prompts the installer to enter the password for which default users?
A. SYS and SYSTEM
Q You are designing the physical database for an application that stores dates and times. This will be accessed by users from all over the world in different time zones. Each user needs to see the time in his or her time zone.
A. TIMESTAMP WITH LOCAL TIME ZONE
Q What command do you use to drop a temporary tablespace and the associated OS files?
A. ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
Q You wish to use a graphical interface to manage database locks and to identify blocking locks.
A. Lock Manager, a tool in the base Oracle Enterprise Manager (OEM) product, as well as the console
Q CREATE DATABASE abc
A. They cannot be changed unless you re-create your control file
Q You need to change the archivelog mode of an Oracle database.
A. Execute the archive log list command
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
A.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Q You want to shut down the database, but you do not want client connections to lose any non-committed work. You also do not want to wait for every open session to disconnect.
Choice 3 Shutdown transactional
Q What step or steps do you take to enable Automatic Undo Management (AUM)?
A.Choice 5 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, create the UNDO tablespace, stop/start the database
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
A. Choice 4 Oracle Managed Files

Questions on Print Quote report

Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC

1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash

Satellite P300D-10v - Question about warranty

HI EVERYBODY
I have these overheating problems with my laptop Satellite P300D-10v.
I did everything I could do to fix it without any success..
I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
BUT unfortunately the problem still exists...
So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
Well i guess this is a Toshiba bug for many years now.
Its a really nice lap, cool sound (the best in laptop ever) BUT......
So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
If any body knows PLS let me know.
chears
Thanks in advance

Hi
I have already found you other threads.
Regarding the warranty question;
If there is something wrong with the hardware then the ASP in your country should be able to help you.
The warranty should cover every reparation or replacement.
But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
Greets

Question regarding NULL and forms

Hi all, i have a survey that im working on that will be sent via email.
I'm having an issue though. if i have a multiple choice question, and the user only selects one of the choices, all the unselected choices return as NULL. is there a way i can filter out anytihng that says "NULL" so it only shows the selected options?
thanks.
here is the page that retrieves all the data. thanks
<body>
1) Is this your first visit to xxxxxxx? <%=request.getParameter("stepone") %>

 
2) How did You Learn About xxxxxxx?
<%=request.getParameter("steptwoOne") %>
 
 <%=request.getParameter("steptwoTwo") %>
 
 <%=request.getParameter("steptwoThree") %>
 
 <%=request.getParameter("steptwoFour") %>
 
 <%=request.getParameter("steptwoOther") %>

 
3) What was your main reason for visiting xxxxx?
<%=request.getParameter("stepthreeOne") %>
 
 <%=request.getParameter("stepthreeTwo") %>
 
 <%=request.getParameter("stepthreeThree") %>
 
 <%=request.getParameter("stepthreeFour") %>
 
 <%=request.getParameter("stepthreeOther") %>

4) did you find the information you were looking for on this site?
<%=request.getParameter("stepfour") %>
 
<%=request.getParameter("stepfourOther") %>

5) Do you plan on using this website in the future?
<%=request.getParameter("stepfive") %>
6) What is your gender
<%=request.getParameter("stepsix") %>
7) What is your age group
<%=request.getParameter("stepseven") %>
8) Would you like to take a moment and tell us how we can improve your experience on xxxxxxxxxx?
<%=request.getParameter("stepeightFeedback") %>

i was messing around and came up with this. it doesnt remove the null, but if it is null it adds ABC beside it. so i think i might be getting close. i just need to figure out how to replace the null.
code]
<%=request.getParameter("steptwoFour") %>
 <% if (request.getParameter("steptwoFour") == null ) {
 %>
 <% out.print("abc"); %>
 <% }
 %>

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

Mid 2010 15" i5 Battery Calibration Questions

Hi, I have a mid 2010 15" MacBook Pro 2.4GHz i5.
Question 1: I didn't calibrate my battery when I first got my MacBook Pro (it didn't say in the manual that I had to). I've had it for about a month and am doing a calibration today, is that okay? I hope I haven't damaged my battery? The calibration is only to help the battery meter provide an accurate reading of how much life it has remaining, right?
Question 2: After reading Apple's calibration guide, I decided to set the MacBook Pro to never go to sleep (in Energy Saver System Preference) and leave it on overnight so it would run out of power and go to sleep, then I'd leave it in that state for at least 5 hours before charging it. When I woke up, the light on the front wasn't illuminated. It usually pulsates when in Sleep. Expectedly, it wouldn't wake when pressing buttons on the keyboard. So, what's happened? Is this Safe Sleep? I didn't see any "Your Mac is on reserve battery and will shut down" dialogues or anything similar, as I was asleep! I've left it in this state while I'm at work and will charge it this afternoon. Was my described method okay for calibration or should I have done something different?
Question 3: Does it matter how quickly you drain your battery when doing a calibration? i.e is it okay to drain it quickly (by running HD video, Photo Booth with effects etc) or slowly (by leaving it idle or running light apps)?
Thanks.
Message was edited by: Fresh J

Fresh J:
A1. You're fine calibrating the battery now. You might have gotten more accurate readings during the first month if you'd done it sooner, but no harm has been done.
A2. Your machine has NOT shut down; it has done exactly what it was supposed to do. When the power became critically low, it first wrote the contents of RAM to the hard drive, then went to sleep. When the battery was completely drained some time later, the MBP went into hibernation and the slepp light stopped pulsing and turned off. In that state the machine was using no power at all, but the contents of your RAM were still saved. Once the AC adapter was connected, a press of the power button would cause those contents to be reloaded, and the machine would pick up again exactly where you left off. It is not necessary to wait for the battery to be fully charged before using the machine on AC power, but do leave the AC adapter connected for at least two hours after the battery is fully charged. Nothing that you say you've done was wrong, and nothing that you say has happened was wrong.
A3. No, it does not matter.

Jabber/WebEx Connect SSO Questions

I've got a few questions around exactly what needs to be done to get SAML working for our Connect accounts to successfully authenticate from Jabber for Windows, Mac, iPhone, and Android.
We have both a Meeting Center and Connect account under WebEx using Loose Coupled Integration. Just this past week I enabled SAML for our Meeting Center accounts which went off without a hitch with the exception of Meeting Center integration with Jabber, which is now broken with a message about SSO enabled Meeting Sites not being supported (I think this would maybe be fixed if we had Tight Coupled Integration with our two account?).
Anyway, my questions are...
For Windows, I understand all clients will need to be reinstalled with the MSI argument for the SSO_ORG_DOMAIN switch I've read about, is that correct? Are there any other switches needed for the reinstall?
How will this work with the Mac and mobile clients? There's obviously no command line options to specify for the installations here, will they just know to kick over to my IdP for authentication once they see an email address that falls under an org with SSO enabled? If so, why does the Windows client need to be completely reinstalled and not just know to find the IdP from the Cloud Connect service like Meeting Center does with the Productivity Tools?
We're just doing this for our Connect Web IM accounts, not attempting any sort of SSO with the phone accounts/UC integration yet.
Any ideas on getting the Meeting Center integration into Jabber working again?

I'd suggest posting your question over on the Jabber Pilot forum, as this forum is specific to Jabber Guest questions:
https://supportforums.cisco.com/community/4551/jabber-pilot-support
-jim

My iPad wont let me download apps bc security questions, but when I try to make them it freezes

Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

ASA VPN QUESTION

Hi All
The question is pretty simple. I can successfully connect to my ASA 5505 firewall via cisco vpn client 64 bit , i can ping any ip address on the LAN behind ASA but none of the LAN computers can see or ping the IP Address which is assigned to my vpn client from the ASA VPN Pool.
The LAN behind ASA is 192.168.0.0 and the VPN Pool for the cisco vpn client is 192.168.30.0
I would appreciate some help pls
Here is the config:
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password J7NxNd4NtVydfOsB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.0.11 EXCHANGE
name x.x.x.x WAN
name 192.168.30.0 VPN_POOL2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address WAN 255.255.255.252
interface Ethernet0/0
switchport access vlan 2
<--- More --->
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa724-k8.bin
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nk-acl extended permit tcp any interface outside eq smtp
access-list nk-acl extended permit tcp any interface outside eq https
access-list customerVPN_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 VPN_POOL2 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list VPN_NAT extended permit ip VPN_POOL2 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_POOL2 192.168.30.10-192.168.30.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list VPN_NAT outside
static (inside,outside) tcp interface smtp EXCHANGE smtp netmask 255.255.255.255
static (inside,outside) tcp interface https EXCHANGE https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group nk-acl in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.0.0 255.255.255.0 inside
snmp-server host inside 192.168.0.16 community public
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd dns 217.27.32.196
dhcpd address 192.168.0.100-192.168.0.200 inside
dhcpd dns 192.168.0.10 interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy customerVPN internal
group-policy customerVPN attributes
dns-server value 192.168.0.10
vpn-tunnel-protocol IPSec
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value customerVPN_splitTunnelAcl
default-domain value customer.local
username xxx password 8SYsAcRU4s6DpQP1 encrypted privilege 0
username xxx attributes
vpn-group-policy TUNNEL1
username xxx password C6M4Xy7t0VOLU3bS encrypted privilege 0
username xxx attributes
vpn-group-policy PAPAGROUP
username xxx password RU2zcsRqQAwCkglQ encrypted privilege 0
username xxx attributes
vpn-group-policy customerVPN
username xxx password zfP8z5lE6WK/sSjY encrypted privilege 15
tunnel-group customerVPN type ipsec-ra
tunnel-group customerVPN general-attributes
address-pool VPN_POOL2
default-group-policy customerVPN
tunnel-group customerVPN ipsec-attributes
pre-shared-key *
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a4dfbb82008f78756fe4c7d029871ec1
: end
ciscoasa#

Well lots of new features have been hinted at for ASA 9.2 but I've not seen anything as far as an Engineering Commit or Customer Commit for that feature.
Site-site VPN in multiple context mode was added in 9.0(1) and I have customers have been asking for the remote access features as well.
I will remember to ask about that at Cisco Live next month.

New to Apple, questions about using Windows, and other things

Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?

Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.

New Member / Video Card Choice Question

New CS4 Production Premium User Here.
I am building a computer system specifically for Video Editing and production for use with Premier CS4 & Sony Vegas.. Have been doing my usual amount of Over Research here and other places but have a series of issues I am having a little trouble coming to grips with.
I have been into computer editing game for a long time but strictly in the Audio Recording /Mixing area /..
Video is a new interest which has me hooked / Im also a Gear Junkie so I have to watch it. 
I will probably be back with a couple more topics but to keep this thread simple /
My first post question is the topic of Video cards: Adobes Hardware compatibility list seems a little out dated. ?
The system does not have to be an ultimate gaming rig as I am not into that / just SD & HD Video editing & 3d effects.. I need a card which will do what is needed / works well with Premier CS4 / Is not too loud fan wise / can run 24/5 and not overheat.
I also will need the ability to monitor on a HD TV with a good sound monitoring system / Midas / Bryston / Dynaudio etc;
I was considering either of the following / from lowest price to highest.
ASUS GeForce 9600GT Silent 650MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GT Matrix 612MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
Questions:
Is a 512mb card sufficient?
Will all of the above do what is needed for my purpose?
What about noise of heat issues.
My system could be running close to 24/5 at times.
Have not made a final decision on all components but will probably basically start of like this.
Vista 64 Bit/OS
Core I7 940
Asus Rampage 2 Extreme or a plain P6T
Antec 1200 Case / For now I will leave out the hard drives and other things on my list.
My builder suggests to stick with ASUS Video Cards because he has the fastest warranty replacement service on his end for ASUS products / plus I am a total ASUS Motherboard guy with years satisfied experiences.. (in Audio setups).
Any feedback or comments on the above will be appreciated.
Thanks / Orion

Thanks Members for the Feedback:
I am trying to stick just to the Video Card Issues so the topic does not get all over the map / Raid issues have already been researched & I might have a question about that later in another thread.
Witha the video card issue I am just trying to see if I can get a reply which the majority of users agree upon / not an easy task & that is were my confused state of topic started.
b Keith
It seems what you have said about QUADRO cards is the most agreed upon overall from my last three months of research at various locations / The cost is extreme for these cards & I was just trying to determime if I realy needed to go that far : >$2,000.00 and up.
just for the Graphics card..
Perhaps I should start of with one of the cards I first mentioned which are dirt cheep compared to the Quadro series and replace it when I have arrived at the point where my shills are beyond my hardware limitations.
b Charles & Jim.
Thanks for the reference to the . >ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3< I was thinking this might be the best to start with / except for the reported could be problems of / Noise / card size and Heat issues if running 24/5?
Other issues you have stated also seem to be agreed upon from mny sources as well / which is why I am considering perhaps not going Raid "o" from the start / perhaps Raid 5.. / or No Raid until I see If realy need it for my own personal use level.
b conclusion to this point in the game:
Looks like If I do a top notch system following all the higher end recomendations it will cost me over $10,000.00 (if I include a capture card / raid card (Areca 1220 or 1240(don't want to get into that topic just yet)& all the extras... This is about double the investment I had planned as this is basically a serious hobby not a business venture. Plus we have not included another $6,000.00 for a half decent peosumer HD camera with a few extras. I was trying to keep the entire setup to 8 to 10 grand total.. Not including the software / so this looks like wishfull thinking at best / Ho Ho.
b remember / unfortunately my pricing reflects Canadian $$ which includes a 25% hike in pricing because our government wants the loonie (Good Name) low valued so businesses can export our products at built in 25% Sale Pricing.
Perhaps,we wont get into that topic/please, but I just couldn't resist / when I start thinking about government issues (anywhere in this world) I tend to go off the deep end as part of why I am going into this video thing is to document the destruction of our environment & the entire democratic process, which is a total farce in my neck of the woods. Nuff Said..
Again Thanks for the input and I will keep watching and perhaps cover another topic later / my goal is to place an order for a build within the next 10 days of so.
B Orion

External preview display via. Mini-DVI to video adapter QUESTION

Hello, I have been browsing this forum for a while, and this is my first question.
I have a Macbook Core2duo running Final Cut Pro. I purchased a Mini-DVI to S-video/composite video adapter.
I cannot get my work to preview on this external monitor. I would like to view the canvas on the monitor while working. I had this setup at school on a G5, but I cannot get it to work on my macbook. The only way apple suggests doing this is by setting up a camera via. firewire and then run from the camera to the NTSC video display (television). I would just like to do it via. mini-dvi to my television for previewing.
Any help is greatly appreciated. Thank you,
Morgan Bressler

From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
-Brian

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Question to DB_16K_CACHE_SIZE

Similar Messages

Maybe you are looking for