Question to local workbench request

Hi,
I have question to local workbench request. If this kind of request is released, is it stored also in the local transport folder (/usr/sap/trans...) in the file system? Or where I can find it?
Thanks for your answers.

Hello Andreas,
A local workbench TR or for that matter any local Transport Request is one which has no target group/target system assigned to it and hence even after releasing it the changes stored in it don't get moved to other systems.
A local TR when released does not get stored in /usr/sap/trans folder as data and co-files for local TRs don't get created.
A released local TR can be viewed in SE01 transaction in SAP.
Please let us know what is your exact requirement with local workbench TR? May be we will be able to help you out with that.
PS award points if you found this answer useful.
Regards.
Ruchit.

Similar Messages

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

How to transfer local workbench request to production server

Hi,
All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
Kindly help.
Regards,
Sriram

Hi Sriram,
In SE01 check whether u have given value for target system or not.
Target system is ur production system .Check whether u have specified it in SE01 for ur transport request.
If u have not specified target system for ur Transport request it will be shown in Local Workbench request
Regards,
lakshman.
Edited by: Lakshman N on Aug 4, 2009 9:31 AM

Transport for local workbench request

Hi guys,
i have a package which I modified and want to save to a transport, but a dialog is prompted for local workbench request. Actually I am wondering why this package is local object. Because in local object I didn't see this object.
Can somebody give me some hint?
Thanks in advance
Regards,
Liying

A local object is something which non-transportable. You should change the Object directory entry of the objects to a transportable package so that the system will automatically prompt you for tr. request number.
regards,
Ravi
Note - Please mark all the helpful answers

List all Local Workbench Requests

Hi all,
In SE09 there are more than 20 thousand requests. In these there are lot of local workbench requests available. Some local workbench requests have different packages.
My requirement is to list out all the local workbench requests from different packages. How it is possible?
Regards,
Ranjith C.

Hi ranjith,
Go to table TADIR. You give the package name or development class name in the field DEVCLASS. You will get all the requests for this package in the field KORRNUM.
Hope this will help you.
Regards,
Sanath.

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Local change requests

Dear All,
One of transport request has ersides at
302-> Workbench -> Local change requests . --> When I release the Transport
request its didnot create a data and cofiles under /usr/sap/tans folder.
At the same time Transport request is resides at
302-> Workbench -> DMY Dummy->Released the request -> created the data and cofiles.
1. What is the Difference between Local change requests and DMY transport requests. ?
2. How to get the data and cofiles of transport request resides under Local change requests. is their any way to copy and create a new transport. If yes. How to copy and create a new transport request in sap R3 4.6C.?
Thanks
Malai

Dear Sharath,
Thank you for the detaild information.
I have mistakenly already released local transport request, Now status shows that released. And screen is not editable.
Hence I tried your second options.
Created the copy of "Local Change request" which I already released,
XXXK900206       XXXPADM       For Pmg Modification 20100531 Modification
     XXXPK900207   XXXPADM       Repair (Changed from Unclassified)
         Object list of request
         Comment: Object list included
         Report source
First I released the reference Transport Request. Its released fine, then When I release the transport request it prompt a small window
Object Checks
Not all objects in the request could be locked
Do you want to release them anyway?
Yes or Error or Cancel is available.
I clicked the error button. found that below message on the screen.
Object LIMU REPS ZFFF0020:
Only edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0320:
nly edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0380:
_When I click Icon which resides above error , it prompt me the below window_
Only edit objects from development class ZPN001 in local requests
Message no. TK 332
Diagnosis
Objects in development class ZPN001 cannot be edited in transportable Workbench requests in the current system FNP. The transport routes are configured such that objects from development class ZPN001 can only be edited in local Workbench requests.
System Response
The function terminates.
Procedure
You have the following options:
If you want to transport objects in development class ZPN001 into the target TS1 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in development class ZPN001 to be transported generally into the target system TS1, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System.
PLease let me know how to procedd?.
Thanks
Malai

Workbench request & Customizing Request

Hi ABAP Experts,
What is Work bench request and customizing request ? what is the differences ?
Thanks and Regards,
Vijaya

HI,
Customizing Request:
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
- changes to the Customizing settings are possible
- the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the SAP System.
Workbench Request:
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Changes to Customizing settings are recorded in Customizing requests.
Workbench requests record changes made to ABAP Workbench objects.
It shows the 2LIS_11_VAITM is already in a particular request......you can do changes and in it if you delete the request or it might be locked in the request with someone's other ids....you can verify with them.....
You can see good details on this thread:
Re: customising and workbench request
Hope this helps...
PLS:AWARD POINTS IF USEFUL
SRI
Hope this helps

Workbench request goes to aother

When I am creating New request . It is going to new Workbench Earlier It was going Local Change Request but Now It is doing to PRD Production system.
Now I am unable to release Request that are in Local Change Request.
Workbench            Workbench request
    Local Change Requests
        Modifiable
    -> PRD Production System
        Modifiable
Customizing          Customizing request
How I activate Local Change Request

Hi,
Your Workbench request in DEV is getting into PRD as customizing request, this was next to impossible.
Workbench: client independent request(usually these technical changes)
Customizing: these are client dependent(these are usually changes developed by functional ppl)
You cannot release local change request, since these request are local to tht system/client and non-transportable. Probably you can try to re-save them and system will ask new request number while saving and you can save it in transportable change request.
You can still create a new request from se01 and then add the objects of your local change request into the newly created request and save and release the request to transport.
But still certain changes are non-transportable and they will be saved as local change request and even if you transport them nothing is going to affect in target system.
For this reason we openup the client to make manual changes.
Please frame your question properly so that we can clarify your doubt.
Regards,
Raju.
Edited by: Sita Rr Uppalapati on Mar 10, 2009 11:41 AM

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

Problem in releasing the workbench request

I have created a local change request in my workbench.
but i am not able to release it.
it is giving error as objects not activated.. but the objects are already activated..
please provide a solution.

Hi,
In SE09, select your request/task and there is a menu option to check inactive objects.
Pls make sure that everything is active here.
Thanks & Regards,
Renjith

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
 Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
 Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
 Lid: 45169 StoreEc: 0x824
 Lid: 44273
 Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
 Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
 Lid: 56945
 Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
 Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
 Lid: 59505 StoreEc: 0x3F2
 Lid: 52465 StoreEc: 0x3F2
 Lid: 60065
 Lid: 33777 StoreEc: 0x3F2
 Lid: 59805
 Lid: 52209 StoreEc: 0x3F2
 Lid: 19778
 Lid: 27970 StoreEc: 0x3F2
 Lid: 17730
 Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
 + CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
 + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

STRANGE!!! Script in a Workbench Request.

Hi All,
Generally i am told:
1. All Client Dependent objects (Table Entries) ask for customizing request.
2. All Client Independent objects (Cross-Client table entries) ask for Workbench Request.
The SAP Script which is a client dependent object, but when i was saving my script it asked for a Workbench Request.
Could any one please let me know why this happens.
Thanks & Regards,
Goutham.

You have mentioned the answer inthe question itself. Customising requests are for Client dependent Table Entries. Since Script is not a table entry but a R/3 object it will be saved in the Workbench Request.
Regards,
Anish Thomas

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

Single workbench request for CONSUMER PROXY in crm 7.0.

Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

Question to local workbench request

Similar Messages

Maybe you are looking for