Question to Transferring Global Settings from Source Systems

1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
BW User ALE
Debugging User
BEx order number
Releasest. hier
Monitor initial
Last IDoc no.
Last IS-Nr.
XPRA executed
Lock Mangr Logs
MD: Sing. Rec. Inst
RFC BI Accelerator
2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
Thanks for the answer.

Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.

Similar Messages

Transfering Global Settings from R/3

Hi All,
I am supposed to load data into Bw from R/3 client 120. But because of no data in it we are using client 150 for testing as it contains some data. The data in 150 is not reliable and we are using it only to check our loads. Now, I want to do some loads from 150 and so want to transafer the global settings like fiscal year variants etc. from 150. I am not sure if the fiscal year variants and all the other settings will be same later in client 120. Now, my doubt is if I transfer all the settings from client 150 now for our testing can we delete all of them and transfer all the settings again from client 120 when it is ready? Is it something possible? If so, will it effect the future loads from client 120 in anyway?
Your help will be highly appreciated in this.
Best Rgds,
James.

Hi Sergio,
Sorry, but I couldn't get what you exactly mean. How can we transfer the global settings from 120 with "rebuild tables" options? I have checked for that option by right click on the source system but couldn't find any.
Best Rgds,
James.

Transfering global settings

Hi All,
We have created a process chain where in we have included the code for transferring global settings and for Exchange rate Transfer along with their variants.
In this Variants the we have given the system names as the DE0.
(Development BI - DB0, Development R/3 - DE0.
Quality BI - QB0, Quality R/3 - QE0.)
The Process chain is working fine. We need to transport this to quality and then to production. My questions are:
1. Would this transport be successful (as we are writing the system name as DE0)?
2. We do not have an option of doing any changes in quality system. Would the quality system automatically convert the system name from DE0 to QE0?
3. If not what is the right way to do this so that the process chain is successfully transported and transfers the global settings / Exchange rates from the target system's R/3.
Thanks,
Maddy

Hi Maddy,
Check this post: Re: Process Chian for Transfer Global Settings and Transfer Exchange Rate
Check reply of Sri Arun Prian:
The problem arises due to non assigning of source system in the variant.
Please follow the steps:
1. While you create variant from RSA1 - Source system - Transfer your global settings, there is a tab named "Copy Screen Assignment" at the top of the variant screen.
2. Click "Copy Screen Assignment" and save the variant, which automatically inputs the required source system name in the input.
3. Provide the same variant in the process chain along with program name.
4. Execute the process chain and will be success.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Transfer Global Settings - Multiple sources

Gurus/Experts,
I have BW system connected to many other r3 systems and i have this problem coming up for unit of measures being different in all this systems ,so when i load data to cube it fails with error saying UOM not available for this record ,I replicate UOM using transfer global settings of BW and it solves issue
Questions here is what happens if i keep on tranferring global settings from different r3 systems will it overwrite or update it
example -
System R31 = 10 units in table T006
system R32 = 10 units in table T006
system R33 = 10 units in table T006
will it show me 30 entries finally or it will only show me the entries from system R33 ONLY ,the last system i replicated in BW
thanks

even if they are not and lets say 2 records are same should be ok rite because finally we need the units value doesnt matter which system gets it
example
system A has value ST
system B has value ST
final table will have value ST since they are not unique ,but thats fine isnt it ,or i am wrong
thanks

Mapping new product code from source system to old product code in Oracle COA

Mapping new product code from source system to old product code in Oracle COA
Here is the situation:
One of our legal entities is changing their product codes in their COA segment. We are not changing the code structure in the global SOB. Is there a workaround to pull the source system information into ADI (or any other tool) and map it to the current Oracle product code?
Thanks and regards,
[email protected]

Only The Data of Your Code will Change
then if you are trying to copy a standarad sap-code , you need to copy
every include, FM
there is a Copy option over there in program
you can do tat
thnkx bhanu

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Psa data is deviated from source system data...

Hi all,
My source data was manipulated when it reaches to PSA. We r extracting the data from Flatfiles. And v have one keyfigure as no.of months (say 12,13,14). When am extracting this data to my Infocube this particular fields has changed as 12,000 and 13,000 and 14,000. Even though it is appearing in Simulation under Schduler tab in the same way(12,000 and 13,000 and 14,000).Am not multiplying this field with any value under updaterules.
And the datatype for keyfigure is Number.
And PSA data should always similar to source system data.
But here also am getting deviations. Let me inform me what are the routines and conversion takes place, before the data reaching to PSA from source system.

Hi Suresh,
Don't worry. The field presentation in the cube depends on the field type.
And I guess that comma stands for a decimal delimiter.
And if so, there is no difference at all!
Check your settings.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

To retain the same file name in target(File) that coming from source system(AS2).

Hi All,
I have a requirement to send the two file from the third party system(GXS) to SAP ECC via SAP PI(version - 7.4). We are using AS2 adapter at the sender side to pick the file and using File Adapter to place the file in ECC.
Its a pass through scenarion(No ESR part is used).
Requirement:
We are going to get 2 files ->Example: one from Axis and another one from ICICI -> each bank file will have a file name ->
We have to post the file at the target system with the same name as source file name, the source file name could come dynamically(with diff time stamp).
Please let me know, Is it possible to achieve the above requirement(we have to retain the file name in target that coming from source system) with Sender AS2 adapter, If yes then please suggest the best approach.
Regards,
Pradeep Bawlia

Hi Guys,
The above requirement is solved now.
Solution - I used java mapping for extracting the same source file name and assignning the same to the target system.
Code:
public class ExtractFileName_ASMA extends AbstractTransformation{
public void transform(TransformationInput in, TransformationOutput out) throws StreamTransformationException
DynamicConfiguration conf=in.getDynamicConfiguration();
DynamicConfigurationKey key_AS2FileNmae = DynamicConfigurationKey.create("http://sap.com/xi/XI/AS2/AS2", "AS2Filename");
DynamicConfigurationKey key_FileNmae = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File", "FileName");
String As2FileName=conf.get(key_AS2FileNmae);
conf.put(key_FileNmae, As2FileName);
try{
byte b[]=new byte[in.getInputPayload().getInputStream().available()];
in.getInputPayload().getInputStream().read(b);
out.getOutputPayload().getOutputStream().write(b);
catch(Exception e)
2. Another solution we can use the graphical mapping and need to use the dynamic config UDF at mapping level to acheive this requirement but here is one drawback - we need to do content conversion is this case.
In case of Java mapping, no need to play with source file.
WITHOUT USING ESR, WE CAN NOT ACHEIVE THIS REQUIREMENT.
Regards,
Pradeep Bawlia

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

DataSource extraction very slow ( from Source System to PSA it takes 23 hrs

Friends,
We have enhanced the datasource 0CRM_SALES_ORDER_I with the user exit....after the enhancement i.e (adding the new fields and wrote some coding to enhance ...) the data extraction takes place for around 23 hours. there is approximately 2,50,000 records.
Can you please suggest any steps to tune up the performance of the datasource.
NOTE: Data Extraction from source system to PSA alone takes 23 hrs.once the data is arrived in PSA then the loading of data to cube is fast.
PLZ help me to solve this issue.
BASKAR

Hi Friends,
This is the code used for the datasource enhancement.(EXIT_SAPLRSAP_001)
DATA : IS_CRMT_BW_SALES_ORDER_I LIKE CRMT_BW_SALES_ORDER_I.
DATA: MKT_ATTR TYPE STANDARD TABLE OF CRMT_BW_SALES_ORDER_I.
DATA: L_TABIX TYPE I.
DATA: LT_LINK TYPE STANDARD TABLE OF CRMD_LINK,
      LS_LINK TYPE CRMD_LINK.
DATA: LT_PARTNER TYPE STANDARD TABLE OF CRMD_PARTNER,
      LS_PARTNER TYPE CRMD_PARTNER.
DATA: LT_BUT000 TYPE STANDARD TABLE OF BUT000,
      LS_BUT000 TYPE BUT000.
DATA: GUID TYPE CRMT_OBJECT_GUID.
DATA: GUID1 TYPE CRMT_OBJECT_GUID_TAB.
DATA: ET_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRKT,
      ES_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRK.
TYPES: BEGIN OF M_BINARY,
       OBJGUID_A_SEL TYPE CRMT_OBJECT_GUID,
        END OF M_BINARY.
DATA: IT_BINARY TYPE STANDARD TABLE OF M_BINARY,
      WA_BINARY TYPE M_BINARY.
TYPES : BEGIN OF M_COUPON,
         OFRCODE TYPE CRM_MKTPL_OFRCODE,
         END OF M_COUPON.
DATA: IT_COUPON TYPE STANDARD TABLE OF M_COUPON,
      WA_COUPON TYPE M_COUPON.
DATA: CAMPAIGN_ID TYPE CGPL_EXTID.
TYPES : BEGIN OF M_ITEM,
         GUID TYPE CRMT_OBJECT_GUID,
        END OF M_ITEM.
DATA: IT_ITEM TYPE STANDARD TABLE OF M_ITEM,
      WA_ITEM TYPE M_ITEM.
TYPES : BEGIN OF M_PRICE,
              KSCHL TYPE PRCT_COND_TYPE,
              KWERT TYPE PRCT_COND_VALUE,
              KBETR   TYPE PRCT_COND_RATE,
        END OF M_PRICE.
DATA: IT_PRICE TYPE STANDARD TABLE OF M_PRICE,
      WA_PRICE TYPE M_PRICE.
DATA: PRODUCT_GUID TYPE COMT_PRODUCT_GUID.
TYPES : BEGIN OF M_FRAGMENT,
         PRODUCT_GUID TYPE COMT_PRODUCT_GUID,
         FRAGMENT_GUID TYPE COMT_FRG_GUID,
         FRAGMENT_TYPE TYPE COMT_FRGTYPE_GUID,
       END OF M_FRAGMENT.
DATA: IT_FRAGMENT TYPE STANDARD TABLE OF M_FRAGMENT,
      WA_FRAGMENT TYPE M_FRAGMENT.
TYPES : BEGIN OF M_UCORD,
      PRODUCT_GUID TYPE     COMT_PRODUCT_GUID,
      FRAGMENT_TYPE     TYPE COMT_FRGTYPE_GUID,
      ZZ0010 TYPE     Z1YEARPLAN,
        ZZ0011 TYPE Z6YAERPLAN_1,
        ZZ0012 TYPE Z11YEARPLAN,
        ZZ0013 TYPE Z16YEARPLAN,
        ZZ0014 TYPE Z21YEARPLAN,
     END OF M_UCORD.
DATA: IT_UCORD TYPE STANDARD TABLE OF M_UCORD,
      WA_UCORD TYPE M_UCORD.
DATA: IT_CATEGORY TYPE STANDARD TABLE OF COMM_PRPRDCATR,
      WA_CATEGORY TYPE COMM_PRPRDCATR.
DATA: IT_CATEGORY_MASTER TYPE STANDARD TABLE OF ZPROD_CATEGORY ,
      WA_CATEGORY_MASTER TYPE ZPROD_CATEGORY .
types : begin of st_final,
           OBJGUID_B_SEL TYPE CRMT_OBJECT_GUID,
           OFRCODE TYPE CRM_MKTPL_OFRCODE,
           PRODJ_ID TYPE CGPL_GUID16,
           OBJGUID_A_SEL type     CRMT_OBJECT_GUID,
          end of st_final.
data : t_final1 type standard table of st_final.
data : w_final1 type st_final.
SELECT bOBJGUID_B_SEL aOFRCODE aPROJECT_GUID bOBJGUID_A_SEL INTO table t_final1 FROM
   CRMD_MKTPL_COUP as a inner join CRMD_BRELVONAE as b on bOBJGUID_A_SEL = aPROJECT_GUID .

Doesn't load from source system to PSA and DSO

Hi Gurus,
We have launched a Delta load from Source System (POSDM) to DSO. In the source system there are 5000000 rows but none was loaded into DSO or PSA. The delta load was ok, but any data was loaded.
If the delta load was lunch again, would be loaded those 5000000 rows. Or those 5000000 rows wouldn't be able to load again.
Any idea abut this issue? Any feedback will be really appreciated.
Thanks in advance.

Hi David,
Are you sure this 5 million records are delta records and should be pulled into BW as delta??
did you count the number of records in the underlying tables??
which data source you are using??
Delta loads are suppose to bring the new records or changed records since the last data load and not all the records.
Since the request is green as you said and still it shows 0 records then it is possible that nothing has changed since last delta.try to see the details of the data load... if it failed...may be thats the reason you are not able to see any records.
If you schedule the delta again it will bring the records changed or created after last delta.
If the delta was unsuccessfull then turn the QM status and overall status of request to red manually in the monitor of the request and delete it from PSA and all the targets in which its loaded and schedule the delta again and it should bring the delta.
Thanks
Ajeet
Thanks
Ajeet

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Can the Adobe PDF plugin carry exact phrase search criteria through from source system into Reader?

In SharePoint 2013 if you search for an exact phrase and then view a PDF that is returned by the search (in Reader via the PDF plugin) then the Reader will treat the complete phrase as individual words.
For example, search for "High Court" in SharePoint, get returned a set of PDF documents, and when you view one of them through the Reader the hit highlighting will be for each instance of "High" or "Court".
What is wanted is hit highlighting only of instances of "High Court".
I get the same behavior if the Adobe PDF plugin is installed with the Filesite DMS. So it seems to be standard behavior for the Adobe PDF plugin
Is there a way to make the Adobe PDF plugin carry exact phrase search criteria through from source system into Reader? And then hit highlight the exact phrase only.

Hi Sam,
You can opt for 'Advance Search' option in Reader to match the whole words to get to the specific documents.
Regards,
Rave

Problem in activating datasource after replication from source system

Hi Experts,
After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
    Message no. RG102
Diagnosis
    Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
    specified tables nor defi...
How do I go about solving this problem....Any advise please...

Hello,
You do not mention your source system release but can you execute the check report
described in the SAP note 493422 , if this does not resolve the problem can you goto
RSA1, right click on the relevant "source system" and choose the "restore" option,
then please try and replicate and activate the datasource again.
If you have BW release 7.0 please check that the note 929751is applied in your system
or that you are on a higher support package level.
If there is still a problem please le me know your BW Release and Support package level.
Best Regards,
Des

Question to Transferring Global Settings from Source Systems

Similar Messages

Maybe you are looking for