Question, Trouble with 1st key frame

Let me thank anyone who is nice enough to answer my beginners questions in advance. I made my first very simple flash file yesterday and things went pretty well after I figured out that you had to insert "blank key frames" in the time line until you want something to come on after the beginning of the sequence. I have something that is good enough to go on my web site except for the very beginning of the movie. When my movie recycles everything comes on for 1/12 of a second because every layer has a darkened key frame in position one. From then on it works fine until it recycles again and of course, everything reappears for 1/12 of a second because we are back at the beginning. How do I stop the layers that are programmed to come on later in the movie from flashing on when the 1st frame is passed by on repeats? Something simple I'm sure because I don't see everyone else's movies doing this : < ) Vern

I have my little Flash movie working pretty well and sent it to the forum where it has been posted as a banner ad. The new problem is that it does not send respondents to my web site when they click on the ad. The folks at the forum think I need to embed my web site address somewhere in the Flash file. I looked through the Publish Settings where I thought this would be covered and could not find anything that looks appropriate. Hoping someone can give me a clue : < )
Vern

Similar Messages

Im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

I find that if you have multiple 3d object they must be merged into a single 3d layer their positions reset to align to the same axises then sized and positioned along them. The layer should then be able to be animated well around an axis like the y axis. Here a Sphere, Cylinder and ring. http://www.mouseprints.net/old/dpr/McAssey-CC.mp4

Trouble with editing multiple frames

Hi guys,
I'm new to CS4 - learnt my flash many years ago on Flash 5. So anyway I'm trying to get used to the new Motion Tween function and having a few problems.
I've created a simple animation where an object fades in, stays put for a moment and then fades out (one motion tween with 4 keyframes). I now want to resize the movie clip across all of these keyframes cos I got it wrong to start with.
So I click 'Edit Multiple Frames' (everything disappears but that's for another question), drag the onion thingy across the timeline and select the frames on the layer I want to edit. I then click on the free transform tool and drag the invisible movie clip (you can see the outline!) to make it larger.
Result? Well it seems to scale the first frame, but the others are all left at the original scale. Hence animation now shows object fading in whilst getting smaller etc. etc.
There must be an easy way to do this. I've tried the motion editor but you have to do it keyframe by keyframe. Any suggestions?
Thanks
Ben

Modifying an entire animation with motion tweens is not as easy as it used to be.
Here's the best answer you are probably going to get.
from : http://flashthusiast.com/2009/10/06/scaling-and-moving-new-motion-tweens-in-flash-cs4/
Scaling an entire animation that does have Scale X or Scale Y animated.
If you have previously scaled anything in the tween, doing this is applied to the first keyframe and the tween would animate to the earlier scaling (the auto-keyframing feature can be a detriment in this situation, especially when it comes to scaling due to the percentages being reset - for this reason Motion Presets also won’t help). In this situation, I recommend scaling using the Motion editor:
1. Go to the Scale X and Y properties in the Motion Editor.
2. Press the Alt key while dragging the curve in each graph up and down. This scales the entire scale animation at the same time (same as edit multiple keyframes).
3. If you need to proportionally scale the motion path for the tween as well, select the path on the Stage and use Free Transform or enter a new value in the Transform panel.
I have had success with the above method, but from what I can tell you can only do one property at a time on one object at a time. So it is an awful amount of work.
As for step 2: while dragging the whole curve it seems the property value is very reluctant to snap to whole integers and I often see values like 200.35%.
Same thing applies for dragging property keyframes up and down in the motion editor. Is there a way to get nice clean numbers? I I want to scale something by 50% I don't want 49.83% I find myself often keying in these values by hand.
For me even though scale X and scale Y are "linked / locked / contstrained" It seems I get mixed results with this feature. Changing scaleX doesn't always change scaleY

Trouble with Selecting Multiple frames at once

Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them.
In order to do this, it says have one frame selected, the Shift-click another one.
I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
What am I doing wrong?

In the ANIMATION (FRAMES) panel, when I click on one, then Shift click on another one I get all of them in between.
I hate to ask the obvious question, but did you try the other Shift key?
Can you Control click and select a single additional frame?
Have you tried clicking on all different parts of the frames?
Perhaps posting a screen grab showing what your state of affairs when you're trying to select frames would be helpful.
And of course, there's always the good ol' fallback: Reset Photoshop preferences to defaults.
-Noel

Nokia 500 GPS questions/troubles with: Contacts, F...

So... I have owned my 500 now since Christmas (I received the 500 as a gift from my father-in-law). Overall, for my first GPS device, I really enjoy all the features... But, I'm having quite a few troubles and hoped that some expert users or Nokia Support folks might be able to help.
1) It took me forever, but I found a program to sync my Treo 700wx from Verizon to the Nokia 500. When I first tried syncing my phone it was recognized just fine but then only downloaded my 5 favorite (or quick dial) contacts from the Windows Mobile homepage. Then I did some looking on the internet and found a program from a company called JETware Mobile Software at www.jetwaremobile.com. The first time I used this software (the trial version only) I suceeded in syncing 623 contacts to the Nokia 500. Here are the issues though... The addresses did not sync (what a huge inconvenience considering this was 90% of the reason I wanted to sync the contacts). The phone numbers for each contact (if there were multiple phone numbers for the same person) sync as seperate contacts on the Nokia 500 (not a huge deal).
Question# 1) Isn't there a way to use some sort of a program on the PC to syncronize contacts from let's say Outlook or VCF files or a CSV file to the Nokia 500 manually?
2) I copied all the data from the supplied 2gb SD card and loaded it onto a new AData 16gb SD card & re-inserted the card to make sure everything worked ok on the device - No problem. I uploaded 8 gb of MP3 & 4 gb of Movies (in MP4 format - great program to use is www.pqdvd.com - buy the iPod version or PSP version so you can use it for both) and 1 gb of pictures.
Here are my comments:
MP3's - The player is a bit cheezy, but I was finally able to figure out how to play at random all the MP3s or play individual folders of songs at a time. Too bad you can't create or import a playlist!
FM Transmitter - Totally worthless in Sacramento, CA where there isn't a whole lot of open FM channels on the radio dial. Unfortunately my Jetta doesn't have an audio input plug otherwise this might work a lot better!
Note: the only place I can find to turn the FM transmitter on is in the MP3 playing mode (very strange & annoying)
Movies - I read a lot here to find out why the playback was so choppy & pretty low quality... Bottom line - You have to record the MP4s at about 15fps and create a MP4 file for about a one & a half hour movie that is about 600mb or so. This seemed to work pretty good.
Question #2) Is there a recommendation from Nokia experts on how to help the FM transmitter function worth a darn?
3) I've searched for many addresses on the GPS and echo other's complaints about very strange missing information & strange city lines in Nokia's software. It's very odd to me that I have to go thru about 10 clicks to "Take me home" and that everytime the device navigates me home it takes me a very off-the-beaten-path way home.
Question #3) Is there a way to save the route you actually drove between two destinations and store that as a trip on the Nokia 500 - vs. storing just the end destination & the Nokia solution to get from point A to B.
4) Battery life - If I had to guess the average battery life I've seen using this device is about 1 hour from power up to "I really need charging". Is this normal for GPS devices? I'm guessing it must be and most people just keep these plugged in at all times to their cigarette adapters.
5) Traffic - From my testing in Sacramento, CA there is no traffic service or alerts.
Question #4) Is there a service I need to purchase & how would one go about turning on traffic services for the Nokia 500?
6) User-interface - I'm brand new to this whole GPS world but as you can tell from this review I'm pretty tech-savvy... I'm a bit surprised at home much savvy it really takes to operate this device and I would think the average not-so-savvy user would be very put off by this.
Overall if I were to rate this device out of 10 I'd have to say it's a strong 6/10 and possibly a 7/10.
I really appreciate any expert feedback on my above 4 questions & 6 topics if at all possible.
Thank you!
~Jeff

Jeff, here's my input on your points and questions. Thanks for writing your post...
Question 1) It only supports syncing over bluetooth with phones that meet its bluetooth specs (see the user manual on the DVD for more details or the product website)
Point 2)
While you can't create or import a playlist on the Nokia, you can use your media player on your computer (e.g. Windows Media Player), while the SD card is inserted in your card reader on your computer, to create a playlist. Then copy the playlist file over the existing playlist file found in the root of your SD card.
Question 2) Not sure how to answer this one. The transmitter is built into the Nokia. So you just need to program it to use an available frequency (understanding that it is hard to find in your area). It doesn't unfortunately have the ability to scan for available frequencies (that would be cool).
Point 3) After you've selected to take you home, press the menu button and the Alt Route button where you can (according to the manual) configure the Nokia to block a route from being used.
Question 3) You would have to create a trip that includes enough waypoints (which you can create by creating bookmarks as you drive along) and then use that. Not to be sarcastic, but I find it funny how obsessed we all get about a GPS choosing the best route when if you already know of a better route then why do you even need the GPS' guidance? I'm guilty of this too so I'm also laughing at myself.
Point 4) I'm guessing that if your using the bluetooth integration, the FM transmitter, the TMC receiver, streaming video, using navigation, and keeping the brightness at the max setting, the estimated 2hr battery life isn't going to happen. The manual actually recommends using the cigarette lighter because it is your TMC receiver.
Point 5) My city (Vancouver, Canada) does offer TMC and my Nokia says its tuned in (I know because I've also seen the message where it says it is Tuning) yet I've not seen one traffic advisory yet. My Nokia's manual included an addendum from Nokia saying that TMC service is not available in the US and Canada. We all know this isn't true but maybe this is Nokia's way of saying their version of a TMC receiver doesn't work in North America.
Question 4) Good question. I think the answer is no because this TMC receiver is meant to work with a free TMC service. I'm thinking that maybe the only TMC services in US and Canada are pay-services that require you to enter a subscription unlock code in your GPS - the Nokia doesn't appear to provide such a function. *** This is my theory, I haven't confirmed this with any TMC provider ***
Point 6) I agree the user interface is not meant for non-tech-literates. It took me awhile to figure it out. Especially the meaning of icons and when to use them. This is NOT the Tivo of GPS
Overall I'm satisfied with my GPS even though I suspect there will never be map, POI, or software updates. I plan to figure out a way to mount it to my motorbike and ride all the way down to Mexico City (if I can figure out how to unlock the license for the Mexico map!)
Steve

View Objects with Union Queries--trouble with primary keys

Hi,
I'm working with JDev 11.1.1.3 and am trying to do a couple of things (without success--yet). I am trying to create a master-detail relationship that displays the existing data in a set of 3 tables and later I will be creating forms for inserting and updating.
The table structure is like this:
Table: Member
Field: MemberIdx (PK)
Field: Data
Table: CfgPartner
Field: MemberIdx (PK)
Field: DocType (PK)
Field: DocRevision (PK)
Field: OtherData
Table: CfgB2BPartner
Field: MemberIdx (PK)
Field: DocType (PK)
Field: DocRevision (PK)
Field: B2BData
I have a View Object for the master table (Member). And I have created a 2nd View Object that is a union of the other two tables. There is some data in CfgPartner that doesn't have a matching record in CfgB2BPartner and vice versa. My thinking is that the two tables are related and I would like them to display within the same table on the ADF page.
My 2nd View Object has this query:
SELECT CfgPartner.MEMBERIDX,
CfgPartner.DOCTYPE,
CfgPartner.DOCREVISION,
CfgPartner.OTHERDATA,
CfgB2bpartner.B2BDATA
FROM CFG_PARTNER CfgPartner, CFG_B2BPARTNER CfgB2bpartner
WHERE CfgPartner.MEMBERIDX=CfgB2bpartner.MEMBERIDX(+)
and CfgPartner.DOCTYPE=CfgB2bpartner.DOCTYPE(+)
and CfgPartner.DOCREVISION=CfgB2bpartner.DOCREVISION(+)
UNION
SELECT CfgB2bpartner.MEMBERIDX AS MEMBERIDX1,
CfgB2bpartner.DOCTYPE AS DOCTYPE1,
CfgB2bpartner.DOCREVISION AS DOCREVISION1,
CfgPartner.OTHERDATA,
CfgB2bpartner.B2BDATA
FROM CFG_PARTNER CfgPartner, CFG_B2BPARTNER CfgB2bpartner
WHERE CfgB2bpartner.MEMBERIDX=CfgPartner.MEMBERIDX(+)
and CfgB2bpartner.DOCTYPE=CfgPartner.DOCTYPE(+)
and CfgB2bpartner.DOCREVISION=CfgPartner.DOCREVISION(+)
ORDER BY MEMBERIDX,DOCTYPE,DOCREVISION
The query is valid and runs fine in the database. However, the error I'm getting in the app module makes it sound like I don't have my primary keys set up correctly. Here is the error: (oracle.jbo.PersistenceException) JBO-26028: View object testCfgPtnrCfgB2BPtnr does not include a primary key attribute Memberidx of entity base CfgB2bpartner.
In the View Object it shows the attributes Memberidx, Doctype, Docrevision, Memberidx1, Doctype1, and Docrevision1 all as key attributes. The only strange thing I see is the Entity Usage for Memberidx1, Doctype1, and Docrevision1 are all empty and the info column says "Transient".
Any help would be appreciated.
-Steve

Hi,
I think that to achieve this you need to suround it with another "select from" statement and create alias for the columns
I created a test with the departments table (assuming that they are two different tables with different attributes) just to see that it works.
SELECT DEPID1,DEPID2,DEPNAME1,DEPNAME2
FROM(
SELECT Departments1.DEPARTMENT_ID AS DEPID1,
           NULL as DEPID2,
       Departments1.DEPARTMENT_NAME AS DEPNAME1,
          NULL as DEPNAME2
FROM DEPARTMENTS Departments1
UNION
SELECT Departments2.DEPARTMENT_ID AS DEPID2,
          NULL as DEPID1,
       Departments2.DEPARTMENT_NAME AS DEPNAME2,
         NULL as DEPNAME1
FROM DEPARTMENTS Departments2)The resulting VO will have 4 attributes and you can set the primary key to be (DEPID1,DEPID2)
If your 2 tables have common columns then these columns can have the same alias
If you have any problems let me know :)
Gabriel.

Having trouble with arrow keys and moving objects

All of a sudden I can't move objects in Illustrator (CS4). They move around in a jerky fashion and make big jumps with the arrow keys. I tried restarting, resetting preferences, playing with mouse. What could be causing this and how can I fix it?

View->snap to grid?

Trouble with handheld key store.

Hi,
I got this second hand blackberry 8820 and I tried to download facebook app., but for some reason, it needed handheld key store. Can anyone please help me with this? Ow one more thing, I didn't get any manual or cd for this blackberry.
thank you

when you are prompted for the key store password, just click "cancel".
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Trouble with primary key in query string

Switching from asp to php, so working with David Power's book: The Essential Guide to Dreamweaver CS4 with CSS, AJAX and PHP. Retraining my brain, so starting from scratch in the learning process.
Everything was going perfectly until I tried to add a record's primary key to a query string. I have compared my code with the book's example code, and everything matches. When previewing the page in my browser, and hover over the link that should pass the primary code to the next page, the query string doesn't display properly. It shows user_id=    but no number shows, as it is supposed to. www.webpage.com/update_user.php?user_id=
Here is my code: (please note, <> have been removed, as I was unable to figure out how to display the code the correct way on here (copy/paste was not working, nor Insert Syntax highlighting)
?php do { ?
?php echo $row_listUser['family_name']; ?, ?php echo $row_listUser['first_name']; ?
?php echo $row_listUser['username']; ?       ?php echo $row_listUser['admin_priv']; ?
a href="update_user.php?user_id=?php echo $row_listUser['user_id']; ?"Edit/a
a href="delete_user.php?user_id=?php echo $row_listUser['user_id']; ?"Delete/a
?php } while ($row_listUser = mysql_fetch_assoc($listUser)); ?
Any ideas that could help me figure out why this part in particular isn't working would be greatly appreciated. Writing to the database worked perfectly, I see that there are numbers in the database under user_id, and it is set as my primary key in the database setup. Such a simple process that is causing me such a headache!
Thanks

Hoping this will work- complete code of page. Hopefully you can see what isn't right!
<?php require_once('../Connections/connSCFDIR.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
mysql_select_db($database_connSCFDIR, $connSCFDIR);
$query_listUser = "SELECT user_id, username, first_name, family_name, admin_priv FROM users ORDER BY family_name ASC";
$listUser = mysql_query($query_listUser, $connSCFDIR) or die(mysql_error());
$row_listUser = mysql_fetch_assoc($listUser);
$totalRows_listUser = mysql_num_rows($listUser);
$query_listUser = "SELECT username, first_name, family_name, admin_priv FROM users ORDER BY family_name ASC";
$listUser = mysql_query($query_listUser, $connSCFDIR) or die(mysql_error());
$row_listUser = mysql_fetch_assoc($listUser);
$totalRows_listUser = mysql_num_rows($listUser);
?>
<?php require_once('../css/scf_admin.css'); ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<link href="/css/scf_admin.css" rel="stylesheet" type="text/css" />
<script src="/SCFSpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="/SCFSpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixRtHdr">
<div id="container">
<div id="header">
<div id="mainContent"><br />
<h1>View Users</h1>
<table width="500" border="1">
<tr>
    <td>Name</td>
    <td>Username</td>
    <td>Administrator</td>
    <td> </td>
    <td> </td>
</tr>
<?php do { ?>
    <tr>
      <td nowrap="nowrap"><?php echo $row_listUser['family_name']; ?>, <?php echo $row_listUser['first_name']; ?></td>
      <td><?php echo $row_listUser['username']; ?></td>
      <td><?php echo $row_listUser['admin_priv']; ?></td>
      <td><a href="update_user.php?user_id="<?php echo $row_listUser['user_id']; ?>">Edit</a></td>
      <td><a href="delete_user.php?user_id="<?php echo $row_listUser['user_id']; ?>">Delete</a></td>
    </tr>
    <?php } while ($row_listUser = mysql_fetch_assoc($listUser)); ?>
</table>

Trouble with hot keys and preferences

Some of my hot keys decided to be a bit moody and stop working. For example: Ctrl+Space to zoom or Space for the Hand Tool. I know my spacebar still works properly and also tried restarting my computer.
After searching the forums and FAQ I also tried:
Reset Tool and
Reset All Tools
Which didn't cure the problem. I also tried simultaneously hold down Shift+Option+Command keys when I launched PS CS5 but the only window I have pop up is the Scratch Disk Preference window...
Any suggestions or ideas what may be the issue here? Thanks you in advanced!

Unfortunately htting the esc key does not solve it. Does the 3-button method only work for certain versions and/or platforms? As I mentioned, while holding them down while launching it only pops up the Scratch Disk Preferences.

Audio Key Frames Scrambled On Import From P Pro

I'm importing three audio tracks from Premier Pro 5.5 into Audition, and each audio track may contain several dozen separate clips.
On some tracks I loose all my audio key frames, and the "rubber band" has snapped
to the bottom and the track has no output. On other tracks, I'm loosing about a third of the key frames, poof, gone. In some cases, the key frames have been moved around within the clip,
say I created a fade up at the beginning with two key frames, and after import the first key frame, at -00 db, has moved ahead five seconds, and the second key frame is
at the proper level, but also has been slid over five seconds. Other key frames randomly drop to -00 db from where they originally were.
In P Pro I adjust my audio automation by setting key frames and moving the "rubber band". I then export by Edit > Edit In Audition > Sequence and check the "Send
Clip Vloume Key Frames" box, and un-check the "Render Audio Clips Effects" box. In the P Pro timeline I have not seclected any individual clips or tracks, I don't
believe I need to.
A multitrack session opens in Audition, and my key frames are scrambled up.
Using Mac Pro with OS 10.6.8 , P Pro 5.5.2 and purchased the CS 5.5 Creative Suite last December
Thanks in advance for any help that may keep me from going nuts Tom/ Miami

Thanks for the reply and I do apologize for some of the newbie questions, I downloaded MPEG StreamClip and attempted the convert.
I have to admit the following QT movie inspector details of my original video are below and play fine in QT but once I convert the video appears choppy at times almost as if clips are being dropped?
Is my default format simply not compatible?
If not then what would you recommend my settings be in MPEG Streamclip to export without any choppiness?
Again I do thank you for your help!!!!

Copy and past key frames?

I have 2 sequence that are the same.
Is it possible to copy and past the video filters from one clip in one sequence to same clip in the other sequence? And have the key frames in the correct place?
I’m trying to do this but its not staying in sync with the sequence what I mean is the key frames are in the wrong place. I’m opening the clip in one sequence going to the filter tab coping the filter with the key frames and then when I past in to the second sequence the key frames are in the wrong place.

For Kevan,
I only was getting confused by you saying:
...you click on clip/control-c/select 'paste attributes'....
- 'click on clip', I do understand
- 'Control-C' does nothing on my keyboard (standard layout).
So I supposed you meant 'Control-Click' which brings up a pop-up menu (or what's the good name for that) which gives me a variety of options ('open in viewer', 'item properties', 'send to...', etc) including 'paste attributes'. And because that's the next thing you advised:
- Select 'paste attribute'...
...I assumed you meant to say 'Control Click' (Or Right click on a 2- or 3-button mouse.)
edit: This pop-up, I think, is called 'contextual menu', not 'pop-up'
So If on your setup Control-C does the same as Control Click, then you've probably set up your keyboard for that. If this is the only 'problem' you have I wouldn't even consider trashing prefs...
Rienk
Message was edited by: Rienk

Best export settings for Canon cameras: Key Frame Distance confusion

Good evening! I have the Canon SX230 camera (for easy understanding, you could consider it as 5D Mark) and Premiere Pro CS5.5, and what I need is to export my project with the best similar to the source quality, as lossless as it possible (but not like absolute lossless oversized AVI's...) To my happiness, there are not so many export settings, but I am very puzzled with "Set Key Frame Distance" point. Okay, basically I understand what GOP is, what I don't understand is what value I should choose for the best result, if my сamera does videos with M=1/N=12? I'm choosing "1" Key Frame Distance, like all frames are I-frames, saving the original sequence, because you don't want to convert original I-frames to P-frames, so it's better to make them I-/P-/B-frames all like I-frames? Am I right at this point, is that wise, and will it be the best reasonable option, matching original M=1/N=12? Or is it not worth it? And will it fundamentally affect the file size? I really need your help on this, worked on this project for three months and really don't want to screw up all:) Thank you very much!
sample of my sourse files:
and this is my export settings, which I think is the best of the best, but please correct me if I'm wrong:

Oh dear Ann, unfortunately it is not possible.
For some unbelievable reason it is okay to mux H.264 with Dolby, but forbidden to mux H.264 with PCM. That has absolutley no sense. Anyway, that's not a problem, mkvtoolnix does a perfect job. Really need PCM stereo audio for that project. And H.264 is the best codec for Full HD project out there, MPEG is too old...

Remove time bar key frames

Hi all !
I'm just a beginner in shake. It may seem stupid but I can't manage to remove the key frames on the time bar below in Shake 4.
All I do now is remove the nodes, in order to create some others with new key frames.
I'm sure there is a simple way to do so but the user manual is hard to understand (it's in english and I'm french as you can guess).
Dides

select the node that you have key framed and open up the "curve editor" tab, select "selected" button to display graph. A graph with square key frames should be displayed in curve editor window. Drag select all key frames displayed on curve and hit delete. That should remove all key fames associated with that node and also remove them from the time line.

I am having trouble with my MacBook Pro. I get a blank screen with a flashing document file with a question mark in it, yes I have tried to install Mac OS X with the original disk but I get no choices of where I wish to install Mac OS X. Please help ;(

I am having some trouble with my computer, what happened was: I was playing on a game, I played with a magnet, it started to go slower and slower, I pressed F9 then it went slower and then it went to a blank screen with a flashing document with a question mark on it. I tried the original OS X installation disk but when it came to choosing the area of which I save it, it showed no areas.

Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
If the startup disk is not available from that window, you may be able to repair the disk.
Help here > A flashing question mark appears when you start your Mac

Question, Trouble with 1st key frame

Similar Messages

Maybe you are looking for