Question: Using Adobe Premiere CS3 and a Sony GV-HD700
Hi,
My name is Gerry and I am new to the forum. My problem is as follows: I have my Sony player connected via USB2 to my workstation. I am using widows xp sp3 and the device is properly recognized. When I choose capture in Premiere I recieve a message stating that the device is off-line. I power it on and off, but I am not able to see footage in the capture window. My settings are as follows:
Capture settings = Capture Format : HDV
DV/HDV Device Control
Video Standard: NTSC
Device Brand: Sony
Device Type: GV-D300 * I do not see my device type listed in the drop down list
Timecode Format: Auto Detect
Check Status: Offline
The only options I have tried changing is the Device type, also changing the device control from Serial device control to DV/HDV Device Control.
Any direction in this matter will be appreciated.
Regards...
The Sony HDV700 will work with CS3 via firewire. Settings on the deck and in CS3 are important.
The HDV700 is too new to have its own settings. Select "Generic Sony," that works for me.
DO NOT set the HDV700 format to AUTO--set it manually to either DV or HDV depending on the tape format. Note also, that its often necessary to turn off the deck and turn it back on before the change is recognized by the PC.
You DO NOT selct serial control--you select Firewire or IEEE (I forget what the option is labeled.
Use the pre-assigned option in setting the sequence parameters (yeah, I know, you're capturing to the project window not the timeline, but this is where CS3 gets the capture settings.)
Similar Messages
-
Adobe premiere cs3 and youtube
Hi Everyone,
Please give me some input on how I can use adobe premiere cs3 to create videos for youtube.... specifically... the videos that I will be working on will contain all of the same basic elements...
1. Still Images and Clip art only... no moving video... I want help with uploading the stills/clip art and also with timing who long each still with stay up individually....
2. Speech bubbles (the kind used in comic strips) timed to pop in above above the heads of those people or characters in the stills and clip art... I want help with timing when the bubbles come in and with creating them and saving them so that in future videos i won't have to create them again...
3. Voice over parts done by me to read the parts in the bubbles timed for comic effect... I want help with steps on how to do this...
4. Music added throughout the video just below my voice overs... same as above...
All of my videos will contain these elements... and I want to find an efficient way to set up adobe premiere the first time so that every time I go in to do my youtube videos in the future it will be just a matter of uploading the stills setting a time duration each still and the speach bubbles... reading the voice over, adding the music and then uploading it to youtube... I am new to the software and would appreciate any steps that could be give to help me accomplish these four goals...
Thanks,
Johnthe music you liked was made by chris duncan (who comes to forums but has been busy so hasnt been around lately ).. called " when goblins frolick " ...perfect title for the music.
probably should move this discussion to the lounge area cause it sorta has to do with learning some aspects of programs in general and certain techniques etc.. not really about cs3 and youtube per se...
but anyway..moderators will do that if they want to...
it is a little difficult at first to use photoshop to do what you want, and to use masks in cs3 or just fade graphics in and out and make them appear when wanted..move around etc...and also text issues ( sizes that show up OK on screen are usually pretty large ( pt ). But you'll find when you get past the initial learning part it will open up all sorts of very cool opportunity.. and freedom to do what you imagine...
AE is also used for animation stuff but I dont use AE myself...
if you search for animation tutorials using text baloons you may find some good one that walks you through the process...and maybe even you can find samples of things to download and experiment with on your computer.
my advice is to go ahead and learn what you can and do your own graphics etc .. cause that will open up all kinds of cool things for you to do .. not only in animation things but other things too ...
good luck !
local library might have a good book on animation stuff using adobe products ( versions you have).. can usually search local libraries with computer at home... -
Capturing HDV using Adobe Premiere CS3 - more than 20 minutes of video
Hello,
I'm facing a weird situation with Adobe premiere CS3, I use a canon XH-A1 video camera to capture video & recently started using adobe premiere for editing, the issue is if I start to capture HD video for more than 20 minutes, adobe is not able to capture the video (shows a red screen), but it works fine, if I capture upto 20 minutes of video.
I have in the past had to break down a single tape into 3 halves, to successfully capture the video, this is NOT the ideal way, as I have to babysit the video capture, to limit the capture to 20 minutes & restart it.
Has anyone faced this error? Any advice/pointers would be greatly appreciated.
Regards,
Kalyan.Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down. -
Hi,
Normally during months the edition was done with Microsoft AVI DV Files (4:3 NTSC 48 Khz). No effects (just cuts). Proyect settings as DV-NTSC Standard 48 KHz
Since today when the work is done in a new or old proyect (DV-NTSC Standard 48 KHz) and if the same file (Microsoft AVI DV) is loaded to timeline now is showing a red line over the video on timeline (so requires render). There no effects. This never happens before. it is very weird.
The Premiere is CS3 ver 3.2.0.
This is happening to 2 computers with the same version.So far I know there is no changes on the systems
I was thinking to reisntall 3.0 and then test and the update to 3.2...
Any idea?Hi,
It worked once in one of the computers. (AVi DV didnt show render red over line). BUt afterwards the problem got back. The only solution so far was to reinstall premiere, update to 3.2.0 in both pc.
It worked for a while then problems was again. Reinstalled for second time, so far 2 days still ok.. It is very weird. I unchecked updates from cs3 and windowsfor just in case has any relation.
Thanks for your tip anyway. -
I've never used adobe premiere elements and really need help!
Device: High Definition Audio Device
Errorcode: FFA-8-000D [8004015]
Info
Playback failed.
The audio system does not seem to respond.
Maybe card does not support full duplex mode.
This is what has been showing up every time it try to use my premiere elements....I've gone into the prefrences and unclicked full duplex. but it still shows that. If i could get help that would be great! i'm making a movie for a class and its due may 5th so if i can get the help soon that be even better!! thanx!!!After taking Paul's advice, you might want to go to Control Panel>System>Hardware>Device Manager, and open it up. Go to Sound, video and game controllers (might be called something similar in Vista). Look for your Realtek High Definition Audio and Dbl-click on it. Open up and check everything there.Make sure you have no errors.
Next, go to Edit>Preferences>Audio Hardware and look at ASIO Settings. Check that your Realtek HD Audio output is checked for both Ports (Input & Output).
With Paul's suggestion, and making sure that the Realtek is selected, you *should* not get that error.
If you do, please post back.
I would also recommend Steve Grisetti's two books on Premiere Elements. The first is designated for PE2, but very much of it still applies to later versions. His new book is focused on PE7, but contains a lot of great info on video editing in general (as does the first book).
There is also a forum/site Muvipix, that is dedicated to helping people use aspects of video, audio and still. It also has a lot of great tutorials, plus a lot of Assets, like Menus, and stock footage. Much of that is free and available, and all is accessible with a subscription.
Good luck,
Hunt -
I record with a sony ax2000 and use the 1080 60i setting. what settings should I edit with when using adobe premiere elements 10?
smannino
You have duplicate threads on this issue related to project preset suggestion for your 1080 60i video.
I have responded to your question in the other thread
if i record with a sony ax2000 using 1080 60 i what is the best editing setting to use with elements 10?
Please reply in that other thread.
Thank you.
ATR -
Capture(or import) from Sony DCR-SR75E to Adobe Premiere CS3
Hello,
I have an Adobe Premiere CS3 installed in my mac.
I have used it with my Sony Fx-1 perfectly.
I purchased an new sony dcr-sr75e handycam and have problem capturing or importing.
When I connect the camera to the computer, I don't open capture, and when I try to import the mpg files, I only get the video of the files and I don't get the audio, and the video is imported very low quality. Can you please help me?
Thanks in advance,
LeventCopy the files from the camera to your PC then import them into Pro. Pro only captures through firewire.
If the audio contains ac3 copy the ad2ac3dec.dll file from Encore in Program Files and paste this in the root of Pro CS3.
Reimport all files or start a new project. -
Can I use Adobe Premiere and Photoshop (with cloud license) on more thn one computer.
Can I use Adobe Premiere and Photoshop (with cloud license) on more than one computer? WHen on the oroad I would like to use it n my laptop, while I installed on the desktop.
Hi Kasiah,
As per the EULA accepted while you launch Adobe applications you can download & install on 2 systems but can use on one at the same time.
Source:http://www.adobe.com/in/products/creativecloud/faq.html
Let me know if you have any questions on this.
Cheers~!
-Mandhir -
Rendering and Exporting in Adobe Premiere CS3
Does rendering stops when the computer/laptop locks? And what's the fastest way to render a 13 min movie in Adobe Premiere.. Does Media Encoder help?
Im using a Toshiba Laptop Satellite M305D-S4831
OS: Win 7 Ultimate 32-bit
Processor: AMD Turion X2 Dual Core Mobile RM-70 (2CPUs) 2.0 Ghz
Memory: 4096 mb RAM
DirectX 11
AtI Radeon 3100 Graphics
Im editing in Adobe Premiere Cs3
Export settings is:
File Type: Microsoft AVI
Range: Work Area Bar
Export Video and Audio is Checked.. -
i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.
Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem. -
I am using a Macbook Pro 15" late 2013 model, and it works great. However, when I use Adobe Premiere Pro (which is a lot as I am studying editing) it occasionally freezes for a second then reboots itself. I got the details of the error and pasted them into this document[1] if it is of any help.
The edition of premiere is new as I used to work with CS5 and recently upgraded in the last few weeks. If anyone could help resolve the issue, that would be great!Not exactly the same, but it SOUNDS like you have hardware problems... P-Pro puts a LOT of stress on hardware
BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/ -
I use Adobe Premiere Elements 11. I want to make a Credit Roll and start off screen and stop with the credit remaining still in the middle of the screen. I know this can be done with CS6. Can this be done in Elements 11? Does Elements 12 or 13 have these options for Credit Roll.
stevel
Please read my work on this topic which involves Premiere Elements Preroll and Postroll settings.
ATR Premiere Elements Troubleshooting: PE: Preroll and Postroll Options Interpreted
Especially the section relating to Titler, Roll and Crawl Titles.
Please let us know if that worked for you.
Thank you.
ATR -
I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro. what do i do now?
Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Adobe Premiere CS3 Keeps Shortening My Video Duration?!!?!?!?!!??!
Okay, so I'm doing a school project and adobe premiere cs3 isn't letting me show my whole videos. I have about 8 Videos that is about 6 to 10 seconds long. There is one video that is 8 seconds long but it cut it short to 6.07 seconds long. There's another video which the audio is completely off and another Video that was doing perfectly fine but then soon after, it was limited to like 7 seconds from 10 seconds. This isn't cool lol. Do I need to do something to my videos to make it not do this? My project is due on this Friday :C
(A) Make sure your Work Area Bar or your (B) In /Out Points cover what you want to export..then check which of those options to use in the Media encoder.
-
Adobe Premiere CS3 not activating
Have a copy of Adobe Premiere CS3 which I bought years ago. Had it running on an old laptop but want to install it on a more recent one and for some reason it refuses to activate. My internet connection is fine so no idea why it is not activating.
Any ideas?
ThanksI enter my serial number in the section reading 'I have entered my serial number and want to activate now.' Then I click next and choose to activate now using the internet. I get a green loading bar that runs for a few minutes and then just get a message saying: Activation - no connection.
Simple as that; just several options for other types of activation (internet is only suitable one for me) as well as a note about HTTPS not working behind some firewalls and looking into proxy settings. I don't believe this to be the problem however.
My internet is working fine but the product won't activate for some reason...
Maybe you are looking for
-
Hello all, Could someone teach me to save and ImageIcon class to an file. I've tried ImageIO.write, but that doesn't accept an ImageIcon class. Tried to use BufferedImage, but that doesn't accept ImageIcon either. ImageIcon icon = new ImageIcon(file.
-
Does INNER JOIN work with Oracle 8i ? (ORA-00933)
hi, I try to execute the sql: SELECT A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT FROM HR_ORG A0 INNER JOIN HR_EMP A1 ON A0.MANAGER_ID=A1.EMP_NO WHERE A1.NAME = 'michael' but I caught an exception: java.sql.SQLException: ORA-00933: SQL...(messag
-
Com.ibm.xml.parser.Parser Not Found
Hi, I am getting error of Package not found i.e com.ibm.xml.parser.Parser But i had this package in my libraries and that have been set to project classpath. Still i m getting error , i m totally confused , please tell me how to resolve it I m using
-
help me in this An application deveoped in cldc/midp environment,will it run in cdc/personal profile environment Thanks in advance
-
I have a 7-minute project with two video tracks and one audio track. Trying to export out as a QT Movie. The encoder box pops up, then in about 1 second, it says Successful, and the project/sequence is green checked. But there is no encoding and no f