Question: What Lenovo drivers are required to make Win 7 work on a T400s?

I'm looking to upgrade my T400s to Win 7 RTM, and I want to check which Lenovo drivers / apps are required. Based on this forum plus the Lenovo Win 7 Beta site (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA), I think I need:
System Interface Driver
Hotkey Features
Power Manager
Either UltraNav Driver or UltraNav Driver 2 -- how do I tell which one of these I need?
UltraNav Utility
Lenovo Fingerprint Software UPEK
ThinkVantage Active Protection System
ThinkVantage Access Connections -- Optional
WLAN Intel Echo Peak ??
Questions:
Did I miss anything or do I not need any of the above?
Any problems running Win 7 64 bit?
Is the above order correct? I thought I saw a thread showing the install order a while back, but I cannot find it now.
Any problem using the Lenovo System Toolbox for Vista?
Thanks!
RocketDude
RocketDude
T400s 2801-CTO

here's what I installed on RC
http://forums.lenovo.com/lnv/board/message?board.id=Beta_OS&message.id=1664

Similar Messages

What additional software is required to make Itunes player work on Windows 7?

What additional software is required to make Itunes player work on Windows 7? I don’t have Java installed
I can not fill out the form fields when singing up, I had to use I.E. 11 to get the apple ID. I couldn’t enter my credit or debit card number in the field or any other info in any of the fields.
Is there a program I can download from apple, to see if my computer can run itunes?
Is there any windows security software that may block itunes inadvertently?
Thank you in advance

What additional software is required to make Itunes player work on Windows 7? I don’t have Java installed
I can not fill out the form fields when singing up, I had to use I.E. 11 to get the apple ID. I couldn’t enter my credit or debit card number in the field or any other info in any of the fields.
Is there a program I can download from apple, to see if my computer can run itunes?
Is there any windows security software that may block itunes inadvertently?
Thank you in advance

What modifications are required to make a servlet support SSL data encrypti

Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumar

Hi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container.

What Lightroom 4 Book settings are required to make a book "send to Blurb"

What Lightroom 4 settings in the Book mode are required to make a book "send to Blurb" ... my 76 page book will not send but a test book of just 4 pages WILL. What should I check for in my bigger book that may be blocking the process. PLEASE someone who knows what to do ...help. I think I've followed all the directions correctly for making my book and spent countless hours on it. I've seen other discussions on this matter with no answers since 2012! Seems like something Lightroom needs to fix. Any ideas what I can check in my book? (PC user)

Try posting in the lightroom forum - this is the sdk (plugin-developer) forum.

What SAP modules are required for insuance sector

what SAP modules are required for insuance sector

Hi,
Following authorizations are required to be able to use all the functions of Support Package Manager:
S_CTS_ADMI
S_TRANSPRT
Additional objects required and which can be used to restrict further the functionality are:
S_C_FUNCT
S_CTS_ADMI
S_DATASET
S_GUI
S_RFC
As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
Regards,
Nagendran

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again.

Hey Charyasmin,
Thanks for the question, and great troubleshooting so far. You’ve definitely taken the proper first steps. To continue to troubleshoot, the following articles may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

What Win 7 drivers are required for Satellite L750

Excuse me...
I'm a new Toshiba L750 owner. I can see this (huge) drivers' list, but here there ara ALL TOSHIBA's utilities aswell.
I believe, the fellow asked (as I am), which are the NECCESSARY drivers for a good/working new W7x64 instalation. Personally, I don't want ANY of the Toshiba's utilities. All I want is a "fresh" W7x64 instalation and my laptop running fine. That's all...
So, I don't think we need no more than 10-14 drivers, to set-up fine our laptops.
So, WHICH drivers are needed?

Fellas, listen to me...
When I bought the L750-1LU last Monday, I almost was one step before... throw it out of my window!
The battery didn't last more than... 1 hr - just fooling around the system/utilities and surfing on the Net, nothing extreme - and my boot time was OVER... 30-40 sec (without installing ANYTHING! I had only the official MSW7 and Toshiba's applications)...
Before... throw it out of my window, I chose to collect all the neccessary drivers from the Net and FORMAT the damn thing, re-install a "fresh" MSW7 and "play" with the power settings...
I did it... the laptop now runs like a charm for OVER 3 hrs, the boot time is about... 10 sec and I don't remember when I needed any Toshiba application and I don't have it installed any more!
I don't need an ECO app, I don't want any "Face ID recognize", or any pop-up message from the MILLIONS I had in few minutes, before I formated the laptop.
The following drivers, are those I chose to install. Please, reply me if I'm good:
* Atheros LAN-ETHERNET Driver v1.0.0.46_W7x64_TC70095400D
* Atheros Wireless LAN Driver v9.2.0.206.0.s3264_W7x65_wCAT_TC00346200E
* Conexant Audio Driver v8.51.1.0a_W7x64_TC70107500F
* Intel Chipset Installation Utility v9.2.0.1015_W7x64_TC70095800D
* Intel Display Driver v8.15.10.2291_W7x64_TC70097300J
* Intel Proset Utility v14.0.2.0.1_W7x64_TC00370400B
* Intel PROSet Wireless WiMAX Software v2.3.0.64_W7x64_TC00244800E
* Intel Wireless LAN Driver v14.0.2.2.1.s64_W7x64_wCAT_TC00370300B
* nVIDIA Display Driver v8.17.12.6669_Wx64_TC70096200U
* nVIDIA HD Audio Driver v1.1.13.1_W7x64_TC70096300C
* Realtek Card Reader v1.0.0.12_W7x64_TC70098500J
* Realtek Wireless LAN Driver v2.00.0013_W7x64_TC70102800C
* Synaptics Touchpad Drivers v15.2.11.1_W7x64_TC70097100F
* TOSHIBA Bluetooth Stack_W7x64_TC00354000J (the system saying is fine, but I notised a "yellow triangle" in "My computer" Devices list. I'm keep trying to update or fix but all messages saying "it's fine")
* TOSHIBA Realtek Card Reader v.1.0.0.12_W7x64_TC70098500J
* TOSHIBA Web Camera v1.1.6.3_W7x64_TC30271000C
* USB3.0 Driver v2.0.32.0_W7x64_TC70102900D
So far, I think the laptop "rocks"... All I need from you is to tell me, if I need any other drivers and if I'll be fine with the 3D GRAPHICS & DOBLY ADVANCED TECHNOLOGY of the laptop (if not, which apps I need to install too)?
Thxs.

What additional resources are required to do the TestStand training courses I and II?

I have the TestStand course manuals for courses I and II and am currently trying to refresh what I learned a couple of months ago when I took the courses. I'm at the point where almost every VI required comes up broken because additional libraries are required in LabVIEW. Why aren't the additional required libraries listed in the course documentation? What are the additional libraries and how do I get them?

Hi there!
If I had to guess I would say that you're missing the TS support API libraries for LabVIEW... Since those are the only 'special' libraries used by any of the examples in the TestStand 3.x or 4.x training manuals.
I'm going to assume that you have some recent version of LabVIEW (8.x?) and some recent version of TestStand (3.x) installed? Unless you took the NI training course more than a few years ago, in which case you might need earlier version of TS, LabVIEW version really shouldn't matter. Evaluation copies ought to be sufficient so I wouldn't blame those...
(If you don't have LabVIEW at all. Make sure you have the correct LabVIEW Run Time Engine version, as that's a pretty common source of TS errors... But without LabVIEW half of the exercises in the training manual are moot anyway...)
In your LabVIEW install path, (C:\ program files etc...\LabVIEW 8.x\) look for the folder path "vi.lib\addons\TestStand\", it ought to be full of a few *.llb files that TS would furnish to LabVIEW when the product is installed. Sometimes when you install things in an unexpected order, or if you have multiple LVs installed, these items don't get put where you expect.
If the folder is empty, copy what you need from... the TestStand install path (C:\ program files etc...\TestStand x.x\) folder "AdapterSupport\LabVIEW" and restart LV. This might get you up and running.
If the folder is not empty. Try running a MassCompile from your LabVIEW Tools ->Advanced menu, there might be a version incompatibility issue...
Feel free to send me an email if you're still stuck. But there aren't any external dependencies/hardware drivers needed for the TS training sequences...
Cheers!
--Elaine R.
www.bloomy.com
Cheers,
Elaine R.
www.bloomy.com

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Which packages are required for make?

I'd like to compile athcool and grabbed the source, but for the life of me, can't figure out which packages are needed for make.

Thanks for the suggestion. I got errors:
# pacman -S base-devel
base-devel package not found, searching for group...
:: group base-devel (including ignored packages):
diffutils ed gcc libtool m4 patch pkgconfig
:: Install whole content? [Y/n] y
:: group base-devel (including ignored packages):
autoconf automake make
:: Install whole content? [Y/n] y
:: group base-devel (including ignored packages):
autoconf automake bin86 bison ed fakeroot flex gcc libtool m4
make patch pkgconfig
:: Install whole content? [Y/n] y
warning: diffutils-2.8.1-5 is up to date -- reinstalling
warning: gcc-4.3.2-2 is up to date -- reinstalling
warning: pkgconfig-0.23-1 is up to date -- reinstalling
warning: automake-1.10.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (14): diffutils-2.8.1-5 ed-1.1-2 gcc-4.3.2-2 libtool-2.2.6a-1
m4-1.4.12-1 patch-2.5.9-1 pkgconfig-0.23-1 autoconf-2.63-1
automake-1.10.2-1 make-3.81-3 bin86-0.16.17-3 bison-2.4.1-1
fakeroot-1.12.1-1 flex-2.5.35-1
Total Download Size: 1.59 MB
Total Installed Size: 78.50 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core-testing...
diffutils-2.8.1-5-i686 191.5K 65.8K/s 00:00:03 [#####################] 100%
ed-1.1-2-i686 45.7K 63.6K/s 00:00:01 [#####################] 100%
libtool-2.2.6a-1-i686 578.7K 121.0K/s 00:00:05 [#####################] 100%
patch-2.5.9-1-i686 54.3K 67.9K/s 00:00:01 [#####################] 100%
pkgconfig-0.23-1-i686 49.9K 62.7K/s 00:00:01 [#####################] 100%
:: Retrieving packages from core...
bin86-0.16.17-3-i686 54.5K 210.0K/s 00:00:00 [#####################] 100%
bison-2.4.1-1-i686 427.0K 52.3K/s 00:00:08 [#####################] 100%
fakeroot-1.12.1-1-i686 52.7K 99.6K/s 00:00:01 [#####################] 100%
flex-2.5.35-1-i686 176.0K 57.1K/s 00:00:03 [#####################] 100%
checking package integrity...
(14/14) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
/usr/info/dir exists in both 'diffutils' and 'make'
make: /usr/info/dir exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by graysky (2009-02-17 01:44:04)

Windows 10 - nVidia device drivers are stopping WinRT modern apps from working

Having setup Windows 10 Enterprise on a VHDX first in a VM to be able to update to latest build (and previously had same issue), as soon as I boot natively on Lenovo W520 (NVidia Quadro 1000M graphics) and install the first set of drivers, the WinRT apps
stop loading at all. The Live Tiles are still working, but when you try to launch any of them, it comes back with an error saying it can't load. interestingly, if I boot in the VM (so that the drivers don't load, but are still installed) all works fine again
- so it is not the installation process that is breaking WinRT.
The drivers I have installed (all from Windows Update) are:
Intel HD Grapohics
Lenovo Power Management
NVidia (3d Vision, Graphics, nView, WM)
Lenovo UltraNav Driver
** UPDATE: I have identified that it is the NVIDIA driver causing the problem. All other drivers now installed from Windows Update and working fine, as long as I don't install the NVIDIA driver.
Has anyone seen this issue elsewhere, to give me a suggestion as to what could be causing the problem?
Certainly feels like an "interesting" bug to be sorted out.

What happens if you try latest drivers from the website of the manufacturer?
If you download and install windows 8.1 compatible graphic card driver do you find any change?
S.Sengupta, Windows Entertainment and Connected Home MVP

What version of iphoto required to have Photo stream work

I have Version 8.1 (415) and Photo Stream is Greyed out. What verison is needed to allow it to work, or should I say what free Verison is required?
Thanks

The following is from iCloud: Photo Stream FAQ
What do I need to use Photo Stream
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
OT

In windows 2nd monitor says no input - what display drivers are used and how can I update them?

HI. I am using windows side of my macbook pro. Yesterday, for some reason, the computer quit recognizing my 2nd monitor. Nvidia is one of the drivers used but I have updated this and it is not working still. Someone said that I should contact the maker of the laptop, apple, and get graphics drivers from them. But I don't know how to do this. Help would be appreciated.
Michael

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

What file(s) are required to launch WebHelp?

I'm using RoboHelp 8 HTML, and generating WebHelp for an application that is supported on Firefox (Windows/Mac) and IE (latest versions of both).
What WebHelp output file is used to launch the help? i.e., if I press F1 or click the Help button, what file is invoked? I believe it is simply the project_name.htm, where "project_name" is the name of the project. Currently troubleshooting why help isn't being invoked. Thanks for any help,
Len

Hi there
Indeed you are correct in thinking that you would see a file named the same as your project and bearing an HTM file extension. This is also known as the "WebHelp Start Page" and is the first field listed in the dialogs when you examine WebHelp properties.
Many confuse this file with the first topic that is presented. (The Default Topic). The WebHelp start page has a different function. It sets a cascade of events in motion. The last event executed is to load the default topic into the browser.
Additionally, don't think that you can get away with delivering this single HTML file for your WebHelp. Some folks misunderstand that point as well. When you look inside the !SSL!\WebHelp folder you will see many files and folders. ALL of them need to be shipped or uploaded to the web server in order to make things work.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

What device drivers are compatible with Linux C platform?

I'm trying to identify a device or devices to give me 16 analogue outputs, 1 digital output and 3 digital inputs. Preferably this would use an Ethernet interface but USB would be acceptable. The software controlling the device(s) would be written in C running on Linux.
I've done lots of searching on the NI website and it's starting to look like there are just a handful of USB devices which are compatible with Linux if using the NI-DAQmx Base 3.6 drivers. Is that correct? I also read a page on the NI-DAQmx Base drivers which states 'Developers creating applications for Windows and Linux-based systems should consider using the latest in full-featured NI-DAQmx.' but I can't find any version of (full) NI-DAQmx that list Linux in their supported OS list.
I would appreciate any clarification anyone can offer.
Thanks.
CAS

CAS wrote:
I would still appreciate any suggestions others might have regarding my original requirement.
NI provides Linux support for a subset of the USB DAQ devices via NI-DAQmx Base [1], where the "Base" means subset. The USB devices supported there are: USB-621x, USB-6008/9, USB-6501, and the NI cDAQ modules 9211, 9214, 9233, and 9234 in the USB-9162 single-slot sleeve.
[1] NI-DAQmx Base 14.0 for Linux
http://www.ni.com/download/ni-daqmx-base-14.0/5054/en/
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Question: What Lenovo drivers are required to make Win 7 work on a T400s?

Similar Messages

Maybe you are looking for