Question when using the Mini Display Port.
Hello,
I just got my 27" Imac, and I was wondering what is the hotkey to switch between the mini display port and the normal desktop?
Am using a Mini Display to DVI adapter and I can't figure out how to switch between the video sources. Am trying to run my Ps3 off from my mac, any help on what the hotkey is would be wonderful.
I read some place that command+F2 is the hotkey used to switch between the port, but maybe you have to assign the hotkeys?
There have been people who have been able to use there systems this way, and Apple states the port is there for this purpose; Any light on this subject would be nice.
Welcome to the Apple Discussions!
You can only run your PS3 on the iMac's display if you have an adapter that turns the PS3's video signal into DisplayPort signaling. A mini-DisplayPort to DVI adapter is the wrong adapter to use. That adapter works in only one direction, from a device with m-DP output to a device with DVI input.
If your PS3 has DVI output then you need an adapter to convert the DVI to HDMI. Then you need a converter to convert the HDMI to m-DP. They run US$149.00. The best resolution that you can expect is 720p.
http://www.kanexlive.com/products/kanexXD.aspx
Then you can toggle using Command+F2.
Dah•veed
Similar Messages
-
I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in ukHi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.
Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.
Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred -
HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro
no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolutionHi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated. Many thanks
to get to the Detect Displays button you have to hold down the Option key and the button appears.
SeanfromFulham wrote:
Many thanks, however I don't seem to have any relevant options under displays. -
I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!
Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen. -
Question related to the mini display port adapters
So I just bought my new macbook pro and soon I'll need to buy an adapter so I'm able to connect it to a projector or monitor using the more commonly used ports.
I'll need VGA and DVI, but I don't think I'll spend 50£+ on two adapters, instead I thought I'd just buy the MDP -> DVI adapter and then use a DVI to VGA converter I have laying around... Would that do the trick?
By the way this is the particular adapter i'm talking about:
http://www.amazon.co.uk/gp/product/B002ERZGKQ/ref=ox_sc_sfl_title_1?ie=UTF8&m=A1 T39SA8AUFT6J
And this is what my converter looks like:
http://www.amazon.co.uk/Cabling4Less-DVI-VGA-HD15-Adaptor/dp/B000FII810/ref=sr_1 _1?ie=UTF8&qid=1310517204&sr=8-1
Thanks in advance!I guess I'll buy the MDP to VGA (Which I'll need more at school for presentations) and later on the DVI one, to use at home. I'd use VGA at home as well but I prefeer the looks of the digital signal, it just has better quality.
Thanks for sharing your experience, now I know what to go for -
When I connect my Macbook Air to my TV via the thunderbolt outlet and using a Mini Display Port/HDMl adaptor, the only image that appears on the TV screen is that of my Air background. There is obviously a signal getting through to the TV, but it is not sending images of anything else, and am unable to watch video through my Air. Any advise/suggestions?
This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred -
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
I no longer have any sound on my macbookpro 10.6.8, not even beginning chime.
Furthermore, I find that I no longer have any images as well as no sound, from any
of my Itunes cinema, tv show purchases, etc.
I recently watched last week a couple of tv episodes through my TV
using a Mini Display Port + Toslink Audio purchased at Apple.
I use this device occasionally and haven't had any problems til now.
Any suggestions to right the problem?.In System Preferences>Sound do you have your internal speakers set as the output source?
You may have toggled on optical output with the Toslink cable - check to see if there's a red light coming from the port. If so, quickly plug and unplug a set of headphones for a number of times to see if you can toggle the switch back from optical to the internal speakers.
Good luck,
Clinton -
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
Help using a mini display port to HDMI cable with MacBook Air and TV
Hi, Apple gurus. I need help setting up my MacBook Air to my Vizio TV using a mini display port to HDMI cable that I just purchased on Amazon.
And here's info about my MacBook Air:
In the Amazon reviews, someone posted the following how-tos, which aren't working for me:
1. Plug in both ends, mini display port on your macbook and the HDMI on any available port on your LCD.
2. Go to upper left Apple menu and scroll down to system preference. Or use your FINDER from the dock, go to applications, then system preference.
3. Click on Displays
4. Click on DETECT DISPLAY
5. A similar screen pops up with name of your LCD, mine says SONY LCD, click on ARRANGEMENT
6. Click the box that says MIRROR DISPLAYS.
7. Go back into system preferences and go to SOUNDS which is located under HARDWARE.
8. Click on OUTPUT, then select HDMI, which should be listed next to your LCD name.
I ran into trouble at step #4. My MacBook Air doesn't list the option of "detecting display." I do, however, have the box mentioned in step #6, "Show mirroring options in the menu bar when available."
Regarding step #8, HDMI didn't appear in the list — I only see "internal speakers."
So, what am I doing wrong? Or, did I buy the wrong cable?
Thanks in advance for your help!Or you need to get an appropriate adaptor. The Griffin adaptor sold on Apple's Online Store will work with a standard HDMI cable.
-
More questions on resolution of Mini-Display Port (Monitor)
I have used several types of cables to connect several different types of external monitors all via my MBP's mini-display port.
My questions:
What resolution will the minidisplay port output to if it is a SINGLE output (says my Nvidia graphics cards) to a display port and to a DVI?
Both my graphics cards say they will output 2560 x 1600.
But since the input type on the monitors and tv is deciding what the resolution is, I'd like to know more about the Mini-Display port. Is it just going to MATCH whatever cord/input?
My newest monitor says that BOTH the Display Port and the DVI will receive 2560 x 1600 resolution.
Does anyone have good experience using one over the other? Is this true, given the adaptability of the mini-display output port?
Does anyone have success with buying a dual mini-display port adapter (they have poor ratings on Amazon from MBP (non-2010) users?
Will a mini-display port to a regular display port carry the 2560 x 1600 data??????Will a mini-display port to a regular display port carry the 2560 x 1600 data??????
Yes it will. Electrically speaking, Mini DisplayPort is no different than the full sized version.
Maybe you are looking for
-
How to completely uninstall adobe acrobat pro 9 trial version?
How do I completely uninstall adobe acrobat pro 9 tial version after it has expired? Since this has expired I am having issues with other programs that use Adome A crobat and the new flash player will not install correctly.
-
In tiger, i was able to close off the preview option and have it not display thumbnails in icons (e.g., any setting in the "view options" pane. now, they never save at all. anyone else having this issue? thanks. ryan
-
Is isolation level setting(Dirtry Read Options) working fine for DB2?
Hello Gurus, We are building obiee reports on DB2 OLTP database. As per my understanding if we select the Isolation level as "Dirty Read" it should not lock the tables but. In our case it is locking the tables and causing others(application Users) no
-
Can I download adobe flash player on iPad 3
Can I download adobe flash player on iPad 3 ,is it supported?
-
Special character deletion issue
Hi all, I have a text field which contains special characters which are not being entered by key board. I would like to repalce those chars. system is displaying these spl chars as '#'. I have used function module 'SCP_REPLACE_STRANGE_CHARS' , but i