Question where used list for VAT codes
Does SAP have a report where (postings) a VAT code has been used since the VAT has been created.
Thanks and regards
Walter
Hi,
You can use T.Code: FB03 or extract from table BSEG.
Regards,
Kiron Kumar T.
Similar Messages
-
Hiiii Experts,
can anyone tel me how i Findout A t-code where are used .
Regards
Anil KumarI am really confused about what your actual query is. As far as my knowledge goes in ST03N you can view a list to find what what T-Codes are used and where. Go to ST03N -> select Detailed analysis -> select Business Transaction Analysis -> set the search criteria and execute.
On the other hand you can use SE93 to find out all the t-codes list so you can decide what a t-code does. Also on the top left the 3rd button is WHERE USED button. Type any t-code in the place and click the Where Used button and it will ask for some checkbox conditions. Select the appropriate boxes and execute. you will find what you are looking for.
Also you can go to SE16 -> and enter the table name TSTC and keep the condition as it is and finally execute it and you will end up with a table which will hold all the codes and description.
hope this helps......
Anirban -
Where-Used List for Assemblies
Hi PM Experts,
Can you tell me hw to see the Where-Used List for assemblies.I m using CS15 T-Code for the same,but the problem is that i can see only for one assembly not for multiple assemblies.what is t-code for multiple.
Regards,
Raju chauhanIf I understand the question correctly, you want to search for multi-level assembiles (materials) with a BOM which is linked to and equipment or functional location e.g.
Floc
-> BOM
--> Assembly 1
---> Assembly A
---> Assembly B
> Assembly B1
If so, then I don't theing there is a standard report to search for equip/floc by sub-assemblies
PeteA -
Where used list for planning variable
Hi
I have one variable in a planning area.
Can I find where it is used..? in which planning function or layout?
Is there anything like "where used list " for variables in BPS.
Thanks for your replies.
NanditaThanks Bindu.
Is there any other way to solve the question. That will be very useful. A table name or sme thing like that....
I have very limited access to Client system .Can not create a report program and execute it.
Thanks for your responce.
Nandita -
Hi Friends,
can i get the program names from where-used-list for a particular syntax.
for example, if i want to know what all are the program that used the syntax " append lines ". is it possible?. if so kindly explain me.
Thanks.Vennila, Where Used utility is desinged got ABAP Object and not for the Language constructs hence you will not be able to use this Utility.
I generally take the way what Avinash has suggested. This programs looks up all the matching progrms from selection screen and finds particular string in it, In addition RPCSOUR* is some table which also hold the source code for report type objects (never tried recently found this).
Regards
Shital -
Where-used list for view methods, and context elements
I want to know where a context element in the component controller is used (and if I can delete it).
Is there something like a where-used list for a context element?
Similar question:
Is there a where-used list for a method of a view?
Best regards,
DanielHi Daniel,
Its not supported for both of these..
Regards
Anuj Goyal -
Where-Used list for BEx query chars & KFs
Hello everyone. I am trying to find a way to identify what Characteristics and Key Figures are used withing an infocube in BW. I think that the BW Statistics cubes may help, but that was going to be my fallback option.
I couldn't find a way to do a where-used list for characteristic and key figures when in the Query Designer. I can do a where-used on restricted key figures and char. variables.
Does anyone know of other ways to do this. How about looking in some of the core BW DB Tables (eg. RS*)?
Thanks,
KevinOh my, I just realized that I typed in my question wrong. I am sorry. That's what I get for doing this during a long meeting!
Here's the right question (I double-checked this time):
I am trying to find what queries contain some specific chars & KFs.
So you are exactly right that the previous suggestion for using RSD1 would work to find what infocubes they are used in.
Sorry for the confusion.
Kevin -
Where used listing for Query Variables
Can someone tell me how to get this list from the metadata repository or from the transport connector?
I have read this thread "where used" list for BEx variables but this isn't working for us.
Is there some config that is required which we have missing?
We are running BI7 SP19 if this helps.
Thanks
CraigArun,
Yeah I figured as much, but this is why I am thinking we have something missing, config or otherwise.
Cause all I get when I do this is a new window with just the Variable details and nothing else, no where used list at all i.e.
Page Creation Date: 17.03.2009 15:12:03
Technical name: V_FSTMONTH
Object version: Active version
System: BWDCLNT200
Description (Short): 1st of Month to Toda
Description (Long): 1st of Month to Today
Last Changed On 17.03.2009 13:25:39
Last Changed by ARMSTEC
Is there something I need to get our Basis Team to do ?
Thanks
Craig -
Where-used-list for APD-Routines (similar to rsaabap)
Hi,
I'm looking for a "where-used-list" for abap coding in APD-Routines. The table rsaabap contains BI-Transformations but not APD-Routines. Is there a similar table for APD-routines that holds the ABAP coding?
Thanks,
JoergHi Isabell,
for the APD routines I didn't find a solution, but did you check the look-up finder:
http://wiki.sdn.sap.com/wiki/display/BI/ABAPprogramtofindBIlookupsandcodePatterns
The documentation says, that it also contains checks on expert routines.
Regards,
Joerg -
Reg: where used list for the any logical (or) physical files
Hi
Is there any possible way to check the where used list for the any logical (or) physical files (Tcode: FILE)
Please let me know.if the path is hard coded in the program...
you can use : RPR_ABAP_SOURCE_SCAN to scan the system and find out where its hard coded.... -
Where used List for Packages (from Transport connection)
Hi SDN,
If objects , such as queries, or webtemplates, are incorrectly allocated to a BEx package at the beginning, my question is as follows:
Can we find out which objects/queries/templates have been allocated to a particular package?
Via some table, or where used list?
As we have a global system, we are performing this task for many developers who have incorrectly used packages from the start.
Thank you.
SimonHi Khaja,
That is perfect! I am tracking the various element objects
ELEM
TMPL
QVIW
etc...
Would you happen to know if it is possible to mass change objects to the correct package and transport through.
Thank you.
Simon -
Bizarre situation with the "Where used list" for a table updated by FB50
Hello all,
I use the "where used list" (all check boxes selected) function in SE11 to find out where and how the table FMGLFLEXT (General Ledger Public Sector: Total) is being used and updated. All I get is a reference to a function module, namely G_POSTING_FMGLFLEXT. When I do a "where used list" (once again, all check boxes selected) for the FM, I get the message: Function Module G_POSTING_FMGLFLEXT not found in selected search area Message no. ES120 despite the fact that all check boxes are selected.
Yet this table contains data which were put in there via transaction FB50 (G/L Acct Pstg: Single Screen Trans.). So somehow, somewhere this data was created and put into the table.
I dont get it! What am I missing?
Thank you for your helpThere could be several reasons for this, including:
- The cross reference tables (used by the "where used" functionality) have not been updated in the system you are logged into - check with your Basis team on this as the programs that do this (a) run for hours and (b) take up a fair chunk of database space.
- The data may be stored via dynamic SQL (e.g. "insert into (g_tab_name)") so the table reference doesn't show up
- The function module may be called dynamically so the FM where used doesn't reflect this
You could try, instead, using the ST05 SQL Trace to track what code is updating the table when you run FB50.
Jonathan -
"where used" list for query structures
Hello Community,
A structure is a re-useable BEx query object. I'm using the older version of BW 3.5, and we need to be able to identify the following :
which structures have been used by a given query (using the query's technical name) ?
which queries already make use of a given structure (using the structure's technical name) ?
Any useful instructions would be so helpful.
Thanks!
Keith HelfrichHi,
You can get the where used list of the structures bu checking in query designer itself for where used list.
Other option is : for both parts of your question you can get the infrmation from table RSZELTDIR.
Here you will get the ELTUID . To find the relation between ELTUID and query technical name (COMPUID), check the my wiki below for exploring the relations below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram -
Where-used lists for many part numbers
I could use CS15 to view the parts one by one. Is there a way to input a list of part numbers to see the where-used list?
Pls shareYa very true. This particular message was called dynamically so it was not showing in the where-used list.
However I was able to get the code where this code was populated by putting a debugger at a standard macro that was used for populating the SLG1 log file. From there I was able to get the code where this message was called dynamically.
Thanks to all
Debashish
Edited by: debashishjsr4 on Oct 11, 2010 12:25 PM -
Where-used lists for standard messages
HI ,
I need to find where one particular standard message is used in the standard codes. For this I am going in to Txn SE91 , selecting the message and clicking the where-used list button. This is yielding no result.
Is there anyother way of finding the which codes have used this message.
Can anyone help me with this.
Thanks in advance
DebashishYa very true. This particular message was called dynamically so it was not showing in the where-used list.
However I was able to get the code where this code was populated by putting a debugger at a standard macro that was used for populating the SLG1 log file. From there I was able to get the code where this message was called dynamically.
Thanks to all
Debashish
Edited by: debashishjsr4 on Oct 11, 2010 12:25 PM
Maybe you are looking for
-
Macbook pro doesn't automatically connect to my wireless network
I have set up my network preferences with my wireless networka the top of the list. This used to ensure I automatically connected, but now I have to manually connect everytime I wake my computer.
-
Trying to get help over the phone!
Hi! How on earth do you get help with a general enquiry by phoning BT? All I get is multiple choices to connect and not one of those multiple choices allow anyone to connect to an operator if the question you have is not included in those multiple c
-
ABAP mapping split messages and dynamic filename
Hello, i have set up a IDOC to file scenario where the IDOC is split into several files, which works fine. In addition to this it is required to set a dynamic filename out of the ABAP mapping for each file. If only one file is created this works alre
-
Creative vision M 30gb problems
I've just got a creative vision m 30gb mp3 and i can't get it to connect properly to my computer. I've installed everything on the cd which came with it and have windows 7 on my computer. The player is regignised and will open up in a view folders an
-
Hi guys- Recently I heard Logitech updated their drivers to work with our new Macs. I'm not entirely sure if this is accurate or not. I found a link which downloaded a new version of Logitech Control Center. Since downloading that, my Logitech G5 mou